WIXLIB

API 6A Gate Valvesvalves for wellhead, manifold, distributionand fracture applicationsan ARRAY Products Group company

TABLE OF CONTENTS2,000–5,000 PSI Expanding or Slab Gate Valves. 510,000–15,000 PSI Slab Gate Valves. 710,000–15,000 PSI Slab Gate Valves with Ball Screw. 9Configuration Options for Array Gate Valves. 11ARRAY Products Group. 12TABLE of ContentsFOR ARRAY GATE VALVESValve Trim Chart. 2

2VALVE TRIM CHARTMATERIALCLASS 1FORGED STEEL BODIESCAST STEEL BODIESSERVICE CONDITIONDESCRIPTIONMATERIAL 2TEMP 3MATERIAL 2TEMP 3NON-SOUR SERVICEGENERAL SERVICEAA STANDARD TRIMAVAILABLE INAVAILABLE INNONAISI 4130API TEMP L–YASTM A487 4CAPI TEMP L–YCORROSIVEGENERAL SERVICEBB STAINLESS TRIMAVAILABLE INAVAILABLE INSLIGHTLYAISI 4130API TEMP L–YASTM A487 4CAPI TEMP L–YCORROSIVEGENERAL SERVICECC FULL STAINLESSAVAILABLE INAVAILABLE INMODERATELYAISI 410 SSAPI TEMP L–YASTM A217 CA-15API TEMP P–YCORROSIVESOUR SERVICEDD-NL STANDARD TRIMAVAILABLE INAVAILABLE INNONAISI 4130API TEMP L–YASTM A487 4CAPI TEMP P–YCORROSIVESOUR SERVICEEE-0,5 STAINLESS TRIMAVAILABLE INAVAILABLE INMODERATELYAISI 4130API TEMP L–YASTM A487 4CAPI TEMP P–YCORROSIVE NSOUR SERVICESOUR SERVICEEE-1,5 STAINLESS TRIMAVAILABLE INAVAILABLE INMODERATELYAISI 4130API TEMP L–YASTM A487 4CAPI TEMP P–YCORROSIVE NSOUR SERVICEEE-NL STAINLESS TRIMAVAILABLE INAVAILABLE INMODERATELYAISI 4130API TEMP L–YASTM A487 4CAPI TEMP P–YCORROSIVE NSOUR SERVICEFF-0,5 FULL STAINLESSAVAILABLE INAVAILABLE INHIGHLYAISI 410 SSAPI TEMP L–YASTM A217 CA-15API TEMP P–YCORROSIVE NSOUR SERVICEFF-1,5 FULL STAINLESSAVAILABLE INAVAILABLE INHIGHLYAISI 410 SSAPI TEMP L–YASTM A217 CA-15API TEMP P–YCORROSIVE NSOUR SERVICEFF-NL FULL STAINLESSAVAILABLE INAVAILABLE INHIGHLYAISI 410 SSAPI TEMP L–YASTM A217 CA-15API TEMP P–YCORROSIVE NNotes: This trim chart provides information on materials included in standard valves offered by Array. Special materials, trims and configurations are availableupon customer request. 10,000–15,000 psi slab gate valves and gate valves with ball screw operators have unique trim charts. Please refer to their respective sectionof the brochure for details.1. Materials for sour service to latest edition of NACE MR0175. Alternate materials are available for special material classes designated by API or projectrequirements. Explanation of suffixes for material classes DD, EE and FF:0,5 0.5 psia maximum partial pressure of H2S.1,5 1.5 psia maximum partial pressure of H2S.NL no limit to H2S.API material class ZZ may be used when materials that have previously been used for sour service will not comply with current NACE MR0175/ISO standards.

3BONNET2BONNETSEAL RINGEXPANDINGOR SLAB GATE4STEM5SEAT4CENAISI 4130AISI 4130AISI 4130AISI 4130AISI 1018/1020 NITRIDED NITRIDED NITRIDEDECENAISI 410 SSAISI 410 SSAISI 4130AISI 316 SS NITRIDED17-4 HH1150 SS NITRIDEDECENAISI 410 SSAISI 410 SSAISI 410 SSAISI 316 SS NITRIDED17-4 HH1150 SS NITRIDEDECENAISI 4130AISI 4130AISI 4130AISI 4130AISI 1018/1020 NITRIDED NITRIDED NITRIDEDECENAISI 4130AISI 316 SSAISI 410 SS17-4 HH1150 SSAISI 410 SSE NITRIDED NITRIDEDCENAISI 4130AISI 316 SSAISI 410 SSAISI 410 SS/CRAAISI 410 SSE NITRIDED NITRIDEDCENAISI 4130AISI 316 SSAISI 410 SSAISI 410 SS/CRAAISI 410 SSE NITRIDED NITRIDEDCENAISI 410 SSAISI 316 SSAISI 410 SS17-4 PH SSAISI 410 SSE NITRIDED NITRIDEDCENAISI 410 SSAISI 316 SSAISI 410 SSAISI 410 SS/CRAAISI 410 SSE NITRIDED NITRIDEDCENAISI 410 SSAISI 316 SSAISI 410 SSAISI 410 SS/CRAAISI 410 SSE NITRIDED NITRIDED2. Charpy impact test results provided as required by API temperature rating and material class.3. API temperature ratings X and Y require working pressure of valve to be de-rated as per API 6A annex G.4. Nitriding is standard on all gates and seat. Hardfacing with tungsten carbide, HF6 or other techniques are available.5. NACE MR0175-2009 Table A.27 limits 17-4 PH H1150 for 05 service only ( 0.5% H2S), CRA impact tested (410SS, Nitonic 50 or Alloy 718) for 1.5% or NLservice depending on temperature class

4HandwheelThrust BearingsBearing Retainer NutBearing Lubrication FittingBonnet PackingPacking RetainerPacking Injection FittingBonnetStemBonnet Seal RingSeatValve BodyBody Grease FittingSeatExpanding Gate AssemblyGate GuideArray 2,000–5,000 psi expanding and slab gate valves are available with either cast or forged steel valve bodiesand bonnets. They are used in a variety of wellhead and distribution applications.

52,000 – 5,000 PSI EXPANDING OR SLAB GATE VALVESGFAAValve boreEBore centerline to bottom of valveFBore centerline to handwheel topGHandwheel diameterJFlange face to faceWT Estimated weightENNumber of turns to open valveJTHREADED VALVESSIZEWorking (PSI)AEFGinmminmminmm2000,2 1 884932000,2 9 000,3 1 83000–50003.123.1279796.937.311761854 1 mWTNinmmlbskgs11.00 27913.00 3309.629.622442449012540561351251913.00 33016.00 40610.2510.25260260125160567215-1 222.5022.7557157713.00 33016.00 .00 40620.00 50813.0013.0033033032042014519024-1 2inmmlbskgsGFAEJFLANGED END VALVESSIZEWorking (PSI)AEFGinmminmminmminJmmWTN2 1 .4348849311.00 27913.00 33011.6214.622953711201255456132 9 .4351251913.00 33016.00 40613.1216.62333422180220819915-1 23 1 8522.5022.7522.7557157757713.00 33016.00 40616.00 40614.1217.1218.6235943547322030034099136154204 1 23023025.9326.3726.3765866966916.00 40620.00 50820.00 50817.1220.1221.6243551154936052056016323525424-1 25 1 9529529532.5032.5032.5082582582521.00 53323.50 59623.50 59622.1224.1228.62562613727800900980362408444317 1 35235235233.1034.1034.1084086686613.00 33016.00 40620.00 50826.1228.1232.0066371481310211118139846350763442

6HandwheelStem AdapterStem PinThrust BearingsBearing CapBearing Lubrication FittingsPackingRetainerStem PackingStemBonnetBonnetSeal RingBonnetSeat/BodyBushing SealGreaseFittingSlab GateValve BodyRetainer PlateSeat RingBody BushingArray 10,000–15,000 psi slab gate valves come standard with forged steel valve bodies and bonnets.They are used in a variety of wellhead, distribution and manifold applications.

710,000–15,000 PSI SLAB GATE VALVESGFAAValve boreEBore centerline to bottom of valveFBore centerline to handwheel topGHandwheel diameterJFlange face to faceWT Estimated weightNENumber of turns to open valveJSIZEPRESSAEFGJWTNinmminmminmminmminmmlbskgs1 13 122 1 49122 9 04153 1 99194 1 136061624STANDARDAPI MATERIAL CLASS: EE-0,5STANDARDFULL STAINLESSWITH HARDFACINGAPI MATERIAL CLASS: EE-NLAPI MATERIAL CLASS: FF-0,512FULL STAINLESSWITH HARDFACINGAPI MATERIAL CLASS: FF-NLCOMPONENT MATERIAL MATERIAL MATERIAL MATERIALBODYAISI 4130AISI 4130AISI 410 SSBONNETAISI 4130AISI 4130AISI 410 SSAISI 410 SSGATEAISI 410 SS NITRIDEDAISI 4130 75K HARDFACEDAISI 410 SS NITRIDEDAISI 410 SS HARDFACEDSEAT RINGAISI 410 SS NITRIDED SOLID STELLITE #6 (1)SEAT SEALBODY BUSHINGAISI 410 SSAISI 410 SS NITRIDED SOLID STELLITE #6 (1)GTFEGTFEGTFEGTFEAISI 410 SSAISI 410 SSAISI 410 SSAISI 410 SSBODY BUSHING SEAL U-TYPE PTFE FKM U-TYPE PTFE FKM U-TYPE PTFE FKM U-TYPE PTFE FKMSTEM17-4 PH HH1150AISI 410/CRA17-4 PH HH1150AISI 316 SSAISI 316 SSAISI 316 SSAISI 316 SSAISI 316 OR 304 SSAISI 316 OR 304 SSAISI 316 OR 304 SSAISI 316 OR 304 SSBONNET SEAL RINGRETAINER PLATEAISI 410/CRASTUDS B7M / L7M B7M / L7M B7M / L7M B7M / L7MNUTS2HM 2HM 2HM 2HM(1) Stellite is a registered trademark of the Deloro Stellite Group(2) Inconel is a registered trademark of Special Metals Corporation

8HandwheelThrust BearingsUpper StemBall Screw AssemblyBonnet PackingLubrication FittingSlab GateUpper BonnetBonnet Seal RingBodySeatLower BonnetLubrication FittingBonnet PackingStem Protector /StandArray 10,000–15,000 psi slab gate valves have ball screw operators to reduce the torque required to open or close thevalve under pressure. They come standard with forged valve bodies and bonnets as well as hardfaced gates and seats fordurability. These features make them well suited for well fracture applications.

910,000-15,000 psi SLAB Gate Valves WITH BALL SCREWGFAValve boreEBore centerline to bottom of valveFBore centerline to handwheel topGHandwheel diameterJFlange face to faceWT Estimated weightNNumber of turns to open s5 1 810,0005.12 13029.5975145.20114828.0071129.007372304860237 1 1610,0007.06 DARDAPI MATERIAL CLASS:EE-0,5STANDARDFULL STAINLESSWITH INCONELAPI MATERIAL CLASS:EE-NLAPI MATERIAL CLASS:FF-0,5FULL STAINLESSWITH INCONELAPI MATERIAL CLASS:FF-NLCOMPONENT MATERIAL MATERIAL MATERIAL MATERIALBODYAISI 4130BONNETAISI 4130AISI 410 SSAISI 410 SSAISI 4130AISI 4130AISI 410 SSAISI 410 SSGATE17-4 HH1150 - NITRIDED17-4 HH1150 - NITRIDED17-4 HH1150 - NITRIDED17-4 HH1150 - NITRIDEDSEATAISI 410 SS - NITRIDEDAISI 410 SS - NITRIDEDAISI 410 SS - NITRIDEDAISI 410 SS - NITRIDEDSEAT SEAL U-TYPE PTFE FKM & U-TYPE PTFE FKM & U-TYPE PTFE FKM & U-TYPE PTFE FKM &POLYPAKPOLYPAKPOLYPAKPOLYPAKSTEM – UPPER & LOWERBONNET SEAL RING17-4 PH HH1150AISI 410/CRA17-4 PH HH1150AISI 410/CRAAISI 316 SS/AISI 410 SSAISI 316 SS/AISI 410 SSAISI 316 SS/AISI 410 SSAISI 316 SS/AISI 410 SSSTUDS B7M / L7M B7M / L7M B7M / L7M B7M / L7MNUTS2HM 2HM 2HM 2HM(1) Inconel is a registered trademark of Special Metals Corporation

10Expanding GateSlab GateSlab GateAvailable for 2,000 – 15,000 psi valvesAvailable for 2,000 – 5,000 psi valvesAvailable for 10,000 – 15,000 psivalvesCast Gate Valve BodyForged Gate Valve BodyStandard on 2,000 - 5,000 psi valvesNot available for 10,000 - 15,000 psi valvesStandard on 10,000 - 15,000 psi valvesAlso available for 2,000 - 5,000 psi valvesAPHAPHDAPHWHydraulic/Spring ReturnHydraulic/Double ActingHydraulic/Wirecutting/Spring ReturnAPDAPPPneumatic DiaphragmPneumatic Piston

11API 6A gate valves from Array can be provided in a variety of configurations based on project requirements or customer preference. A generaldescription of some of the major configuration options appears below.Slab Gate – 10,000 – 15,000 psi valvesOffered in Array’s 10,000 and 15,000 psi slab gate valves, the parallelslab gate offers bi-directional sealing capabilities ideal for wellhead andmanifold applications.Slab Gate – 2,000–5,000 psi valvesOffered in Array’s 5,000 psi slab gate valves, the slab gate offersbi-directional sealing capabilities and is preferred by some end users.Expanding Gate – 2,000–5,000 psi valvesOffered in Array’s 2,000–15,000 psi gate valves, the expanding gate isthe most popular gate we offer because it allows for a positive sealbetween gate and both seats even at extremely low pressures.Cast Gate Valve Body – 2,000–5,000 psi valvesOffered in Array’s 2,000–5,000 psi gate valves, the cast valve body isthe most popular body we offer for 5,000 psi and below wellhead gatevalves. It is very cost effective and offers extremely reliable service.Forged Gate Valve Body – 2,000–15,000 psi valvesOffered in Array’s 2,000–15,000 psi gate valves, the forged valve body isstandard on all 10,000 and 15,000 psi gate valves. Some end users alsoprefer a forged body for wellhead applications where pressures are 5,000psi and below.Safety Valves – Actuated Valves and Actuated BonnetsArray offers a complete line of hydraulic and pneumatic actuators.These can be delivered as complete actuated valve assemblies, asactuator and bonnet assemblies ready to mount on any manufacturer’svalve or as gate valves prepared for actuators provided from anyactuator manufacturer. For more information please see Array’s API 6A &6D Actuation Brochure.CONFIGURATION OPTIONSFOR ARRAY GATE VALVESPlease see trim chart for additional information.