Transcription
Tigers PolymerRubber Sheet
::::: Please make sure to read before use :::::Instruction for Use The data in this catalogue are tested values and not standard values. Furthermore, the contents mentioned are subject tochange without notice for reasons of improvements. It is recommended to always refer to the catalogues or to test results so that the products in this catalogue can retain theiroriginal functions and be used safely. The products in this catalogue are manufactured for general industrial use and not for special applications (such as formedical appliances).When using for medical / medical applications or other applications that require consideration of safety, please test the safetyin advance at your company and use it after confirming it.Please note that our company does not guarantee the adaptability or safety associated with those applications.The user is requested to confirm the adequacy and safety for the intended application in the case of cutting and using theproducts in this catalogue as parts. StorageWarningFire is strictly prohibited. Furthermore, these products should be stored by avoiding the vicinity of heat sourcessuch as stoves and nearby equipments that produce electric sparks.CautionThese products should be stored indoors where they are not exposed to direct sunlight, wind and rain.CautionThese products should not be bent nor be locally deformed.CautionThese products should not be dragged nor pulled over the ground.ProcessingWarningThere is the possibility of causing injury to workers by the smoke at time of grinding and chips at time of cutting inthe case of processing these products. Workers should wear safety goggles and masks.WarningThere is the risk of spontaneous ignition when polished powders and chips of the products are accumulated and itbecomes a cause of burns and fires. Therefore, it is recommended to remove when powders and chipsaccumulate.UseCautionThese products are not suited for medical appliance and for food machinery.CautionCautionThese products are not suited for applications that come in direct contact with the human body for a long time.The life and safety of these products are greatly affected by the application, condition of use, method of fitting andenvironment. Users are recommended to thoroughly confirm in the case of use as parts.CautionThere are cases of discoloration and changing of the quality caused by the precipitation and migration of thecontents in case of use by close adherence of the product to the mating part.CautionGeneral performances are mentioned regarding the chemical resistance. Users should confirm in regard toindividual uses.DisposalWarningThere are cases of noxious gases being produced when scrap material at time of use or member pieces after useare burned. It is recommended to strictly observe legal disposal methods of industrial waste at time of disposal.1
ContentsAbout ProductsP. 1P. 3P. 4P. 5Environment-ResponsiveRubber SheetNatural Rubber SheetSynthetic Rubber SheetSpecial Rubber SheetUrethane RubberClassification byApplications and FunctionsP. 6Environmental AdaptationP. 7P. 8P. 9P. 10P. 11NR Sheet (Natural rubber)NBR Sheet (Acrylonitrilebutadiene rubber)CR Sheet (Chloroprene rubber)EPT Sheet (Ethylene-propylene terpolymer rubber)IIR Sheet (Isobutene-isoprene rubber)CSM Sheet (Chloro-sulfonated polyethylene rubber)SBR Sheet (Styrene butadiene rubber)SR Sheet (Silicone rubber)SR Sponge Sheet (Silicone rubber)FR Sheet (Fluoro rubber)Aflas Rubber Sheet (Fluoro rubber)FR Sponge Sheet (Fluoro rubber)Urethane Rubber Sheet (Ti-Prene Sheet)Conductive Rubber SheetNon-Conductive Rubber SheetFood Grade (raw material) Rubber SheetRubber Sheet for WaterworksConforming Sheet of Expressway StandardVibration Isolation Rubber SheetBridge Collapse Preventing Cushion Rubber TCKL5505Abrasion Resistant Rubber SheetShock Absorbing Rubber Sheet (Ti-Hanenon )Cloth Inserted Rubber SheetNon-Contaminating Rubber SheetFlame Retardant Rubber SheetUrethane Round Rod,Pipe (Ti-Prene round rod, pipe)Urethane Molded Products (Ti-Prene Molded Products)Fluoro Rubber StopperRelation between Load and Strain of Rubber MaterialP. 12P. 13P. 15P. 18P. 19P. 20P. 22P. 25P. 26P. 27P. 28P. 29P. 30Rubber MoldingsTechnical NotesInstruction for Use / Contact informationExternal Specification of Rubber Sheet PackingExternal Specification List of Rubber Sheet PackingOrder of Merit in Properties for Various RubbersCommodity Number of Rubber SheetThickness Tolerance and Thickness Deviation of Rubber SheetManufacturable Dimension of Rubber SheetExplanation of CodesP. 31P. 33P. 34P. 35P. 37P. 39P. 41Standard of Rubber Packing Material JIS K 6380(Excerpt from the standard)JIS K 6353 Standard of Rubber Material for WaterworksChemical Resistance of Rubber Materials2
External Specification of Rubber Sheet PackingUpper labelColor of packingpaper, PP tapeis differentdepending onmaterial.Packing paperName labelBrown PP tapeMaterialidentification tape(PP)Length (m), material, thickness, and company name are printed on one side of rubber sheet surface at 1 meter intervals.(The distance (1m) between the indications should be regarded as rough length. Rubber sheets should be cut aftermeasurement of actual length. Not printed on Silicone rubber, Fluoro rubber and Urethane sheet)Material, company name, and control No. are printed on around middle part of Black normal sheet, NBR-L 70 , CRL 65 , EPT-L 70 and EPT-M 65 .(Ex.) CenterControl No.Company nameMaterial(Ex.)One side ofthe surfaceCompany nameThicknessMaterialLength (m)About 1m intervals External Specification List of Rubber Sheet PackingMaterialNatural RubberChloroprene RubberItem namePP Tape Color / Printed Color ofCharacter for Material IdentificationPacking Paper Color / Printed Color ofCharacterNRBrown base / No character printedBrown base / Black characterCRWhite base / No character printedBrown base / Green characterAcrylonitrilebutadiene RubberNBRYellow base / No character printedBrown base / Green characterEthylene-Propylene RubberEPTBlue base / No character printedBrown base / Green characterIsobutylene Isoprene RubberIIRWhite base / Green characterBrown base / Green characterChloro-Sulfonated polyethCSMBrown base / No character printedBrown base / Green characterStyrene-Butadiene RubberSBRBrown base / No character printedBrown base / Green characterSilicone RubberSRTransparent base / No character printedWhite base / Dark blue characterFluoro RubberFRTransparent base / Pale pink characterWhite base / Dark blue characterUrethane Rubber－Craft tape / No character printedBrown base / Green character3
Order of Merit in Properties for Various RubbersNote) Confirm in advance when using.These are indicated just as general properties.Q：Silicone RubberFKM：Fluoro RubberEPDM：Etylene Propylen RubberU：Urethane Rubber(Above Ranking table is ASTM notation.) Commodity Number of Rubber SheetScope of ApplicationThis system of marking isstandardized regardingthe commodity name of generalrubber sheets excluding the casethat customers specify.123456789 10T ― Serial numberSpecial specifications (alphabetical)Tensile strength (numeral)Hardness (Type A) (numeral)ContentsCommodity name is composed offollowing alphabet and number.Grade (alphabetical)Color (alphabetical)Material (alphabetical)Explanation of Codes1 shows rubber material: Natural rubberN : NBRC : CRE : EPTH : CSMI : IIRS : SBR2 shows rubber color: BlackW : WhiteR : RedB : BlueH : GrayY : YellowM : GreenA : Amberalphabeticaｌ Aalphabeticaｌ K3 shows gradealphabeticaｌ L: Low gradeM: Medium gradeH: High grade4 & 5 show hardness6 & 7 show tensile strengthIndicate as 07 in case that standard value is more than 7 MPa {71kgf/cm2}Indicate as 10 in case that standard value is more than 10 MPa {102kgf/cm2}8 show Special SpecificationsAn alphabetical character is entered when there is a special specification.Not entered when there is not any special specification.ⅱ) Functional (property) Special Specificationsⅰ) Constructional Special Specificationsalphabetical CMultilayeralphabetical AHeat aging resistance testalphabetical KAdhesion testNCloth InsertedBCompression set resistance testLWater absorption testTTeflon laminatedDCompression strength testMFlame resistance testHCloth laminatedEOil resistance testOOzone resistance testFLow temperature testPContamination testGTear testRElectrical resistance testHFlexing testSResilience testJAbrasion testZOther special requirements9 & 10 .show serial number4
Thickness Tolerance and Thickness Deviation of Rubber SheetThicknessNatural RubberSynthetic Rubber(Applicable to standard products)Silicone Rubber, Fluoro eDeviationLess than 1.50 0.150.20 0.150.20 0.150.20Less than 2.00 0.250.30 0.200.25 0.150.25Less than 3.00 0.300.40 0.250.35 0.250.35Less than 4.00 0.300.40 0.300.40 0.250.35Less than 6.00 0.400.50 0.400.50 0.350.45Less than 9.00 0.500.70 0.500.70 0.450.45Less than 10.00 0.600.80 0.600.80 0.450.60Less than 19.00 0.90- 0.50 1.00- 0.50 1.50- 0.50 2.00- 0.50 2.50- 0.50 2.50- 0.50 3.50- 0.501.00 0.90- 0.50 1.00- 0.50 1.50- 0.50 2.00- 0.50 2.50- 0.50 2.50- 0.50 3.50- 0.501.00 0.600.801.20 1.00- 0.50 1.50- 0.50 2.00- 0.50 2.50- 0.50 2.50- 0.501.00Less than 20.00Less than 25.00Less than 30.00Less than 50.00Less than 70.00Less than ―1.502.002.502.50―Unit: mm Manufacturable Dimension of Rubber Sheet(Separately indicated about urethane rubber sheet & sponge sheet)General R/SSynthetic R/STypeThickness (mm)0.5 - 0.81-3Silicone R/SFluoro R/S4 - 1011 - 3031 - 1300.5 - 5060 - 120Width (m)1111111Length (m)2020105221R/S Rubber SheetThe above mentioned size shall be our standard.Please consult us about the other size. Explanation of CodesHardnessNumerical value which indicates resistance by rubber against needle or ball which presses the rubber surface.Measured value is a standard nominal hardness that is measured in 1 second. Value with "( )" use is measured in 3 secondsaccording to JIS K 6253 : 2006 (Physical testing method of vulcanized rubber)Tensile Strength at BreakMaximum tensile stress which is measured when a test specimen finally breaks after being stretched, and is normally expressed by avalue which the maximum load is divided by the original cross-section area of the test specimen.Elongation at BreakDeformation in stretched direction which is caused when a test specimen is stretched, and is expressed by the percentage ofincrease in length against the original length.Compression SetPermanent deformation in compressed direction which is caused when a test specimen is compressed to a certain percentage inthickness for a specified time under specified temperature and left for another specified time after removing the compression load,and is expressed by the percentage of the decreased length from the original thickness against the compressed length in thickness.Tension SetPermanent elongation which is caused when a rubber product is stretched and left for a certain time after the load of stretch isremoved.Tear ResistanceTearing resistance which is expressed by the value which maximum load, which a test specimen is torn after being stretched, isdivided by thickness of the test specimen.Oil ResistanceAlteration in volume or resistance of rubber against deterioration in physical properties by contact with oil.Flame ResistanceProperties which is hard to burn if touched flame and hard to keep burning with flame if ignition is caused.5
Environmental AdaptationWorldwide efforts to reduce the use of substances of concern move ahead in considering the life’s diversity.The substances of concern are specified in laws, industry groups and the green procurement standard of each company inJapan too.Our company doesn’t use RoHS(RoHS 2) 10 substances in our products purposely in grasping raw materials of rubber sheets.Our company will respond to amendments flexibly, in watching the laws, industrial groups and green procurement guideline ofcompanies.Features Conform to the RoHS Directive and ELV Directive(*1) Our company doesn’t use the substances specified in RoHS Directive and ELV Directive purposely as raw materials of rubber sheets. Our company will submit you an evidence report of the fluorescent X-ray analysis depending on your needs. Analyzed Product List (Excerpt as examples)Natrual Rubber SheetBlack Normal SheetBlack Rubber SheetWhite Normal SheetGreen Normal SheetAmber Rubber Sheet(40%)Amber Rubber Sheet(60%) 65 50 65 70 50 45 Synthetic Rubber Sheet 45 65 90 NBR Sheet-L 70 90 EPT Sheet-L 70 CR Sheet-LEPT Sheet-MWhite EPT Sheet-MButyl SheetBlack CSM SheetSBR SheetSpecial Rubber Sheet 65 65 65 70 65 Urethane B8010TR100-50FR Sheet HS80 TR200-90FR Sponge SheetFor products other than the above, please consult us. About other laws and regulationsREACH Regulation(*2) went into effect in June 2007 in Europe. It is examined to add new substances of concern to existing RoHSDirective and ELV Directive. Countries promote the strengthening of laws and regulations, so regulated substances are assumed toincrease in the future. Therefore, Industry associations and each company have implemented the development and the update of theGreen Procurement Standards.Heretofore our company reduces and monitors chemical substances which are expected to be regulated, grasping the details of rawmaterial of rubber sheet. For some general –purpose products, our company doesn't use purposely the following chemical substanceswhich are expected to be regulated in the future.・PCB ： Polychlorobiphenyl・Asbestos・PFOA ： Perfluorooctanoic acid and its salts・HBCD ： Hexabromocyclododecane・PFOS ： Perfluorooctane sulfonates・Deca-BDE ： Decabromodiphenyl etherFor substances of very high concern (SVHC) under the REACH regulation, substances are added approximately once every six months.Please consult us as it is necessary to investigate whether it is compatible or not with each update.*1 RoHS Directive ： Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.(RoHS2) (Restriction of the Use of Certain Hazardous Substances in Electrical and Electric Equipment)ELV Directive: End of Life VehiclesRoHS DirectiveRegulated SubstancesPlumbumHydrargyrum*2 REACH RegulationThreshold Value（*3）： Registration, Evaluation, Authorisation and Restrictionof Chemicals.（1,000ppm 0.10%）1,000ppm*3 Threshold Value1,00ppmCadmium1,000ppmHexavalent PBDE（Polybromodiphenyl ether）1,000ppmDEHP（Diethylhexyl phthalate）1,000ppmBBP（Benzyl butyl phthalate）1,000ppmDBP（Dibutyl phthalate）1,000ppmDIBP（Diisobutyl Phthalate）1,000ppm： the value of level at which something starts to have aneffect.6
NR SheetNatural Rubber SheetFeatures ApplicationsExcels in workability. General packing, gasket material. Rubber mat. Properties : Black Normal SheetPropertiesHardnessType ATensile Strengthat BreakMPa {kgf/cm2}Elongationat Break%HardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%64 (64)3.4 {35}290 8 7- 15Item NameBlack Normal SheetHeat-Resistant Aging70 72hGeneral Properties 65 FeaturesCompression Set Elastic Modulus70 24hin Static Shear%Mpa350.84JIS K 6380CorrespondingNo.Item NumberAAH65133TAKL6503JIS K 6380CorrespondingNo.Item NumberAAH40373TAKM4007AAH50373TAKM5007Applications Excels in mechanical property. General packing, gasket material. Excels in abrasion resistance. Rubber mat. Excels in elasticity. Properties : Black Rubber SheetPropertiesCompression Set Elastic Modulus70 24hin Static Shear%MpaHardnessType ATensile Strengthat BreakMPa {kgf/cm2}Elongationat Break%HardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break% 40 43 (43)8.2 {83.6}610 6 18 218 50 48 (48)8.9 {90.8}600 4 2-719 60 60 (60)8.2 {84}410 7 19- 1223AAH60363TAKL6007 70 73 (72)17.5 {179}430 4- 2- 2515AAH70453TAKM7010 80 80 (75)9.7 {99}270 5- 2- 1320AAH80323TAKL8007 90 92 (89)10.4 {106}300 2 6- 3028AAH90323TAKL9005Item NameBlack Rubber SheetHeat-Resistant Aging70 72hGeneral Properties0.82JIS K 6250 Properties : Color Rubber SheetPropertiesHeat-Resistant Aging70 72hGeneral PropertiesChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Compression Set Elastic Modulus70 24hin Static Shear%MpaJIS K 6380CorrespondingNo.Item NumberAAH65143TAWL6504AAH85142TAWL8504HardnessType ATensile Strengthat BreakMPa {kgf/cm2}Elongationat Break%HardnessChangeType A 65 63 (62)5.4 {55}480 20-534 85 85 (81)5.0 {51}430 5- 20- 2250Red Normal Sheet 65 63 (62)8.1 {83}640 5 2- 1030AAH65253TARL6504Green Rubber Sheet 70 68 (68)8.7 {89}570 4- 5- 529AAH70233TAML7005Gray Normal Sheet 65 68 (68)6.8 {69}530 1- 1- 843AAH65133TAHL6504Item NameWhite Normal sheet1.031.29JIS K 6250 Properties : Amber Rubber SheetPropertiesHeat-Resistant Aging70 72hGeneral PropertiesCompression SetJIS K 638070 24hCorresponding%No.HardnessType ATensile Strengthat BreakMPa {kgf/cm2}Elongationat Break%HardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Amber Rubber Sheet (40%) 50 48 (47)11.8 {120}640 3 5-714AAH50373TAAL5007(60%) 45 47 (47)19.1 {195}680 2-6-519AAH45573TAAH4512Item NameItem NumberJIS K 6250 !These items highlighted in this color are our standard products.・These products should not be incinerated wherever possible because harmful gas to humans might be generated if they are immoderately burned.・ The user is requested to confirm degree of discoloration and contamination beforehand by using sample in the case of use contacting with the other items.・ The life of these products at actual use are greatly affected by condition of the use. The user is requested to confirm it by using sample7
NBR SheetAcrylonitrile Butadiene Rubber SheetFeatures ApplicationsExcels in oil resistance. Packing material for fuel. Properties : Black NBR SheetPropertiesGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break%MPa {kgf/cm2}Heat-Resistant Aging100 72hOil Resistance100 72hChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Volume ChangeRate %HardnessChangeType AItem NameNBR Sheet -LNBR Sheet -MNBR Sheet -HTransformer NBRASTM#1IRM903Compression Set Elastic Modulus100 72hin Static Shear%MpaJIS K 6380CorrespondingNo.Item Number 50 51 (50)8.1 {83}550 11 3- 34-8 3462BEH50361TNKL5005 60 60 (59)9.4 {96}560 11- 15- 44-7 3275BEH60351TNKL6005 70 70 (67) 12.2 {124}550 6 2- 43- 13067BFH70341TNKL7007 80 82 (77)8.4 {86}420 6 12- 35-7 1555BFH80121TNKL8005 90 90 (87)8.6 {88}360 3 18-6-4 555 30 33 (27) 10.8 {110}1030 5- 9- 16- 14 15 40 41 (37) 12.7 {129}800 5- 40- 20- 15 50 53 (48) 12.2 {124}710 6 4- 43- 19 60 61 (58) 10.8 {110}570 7- 5- 30 50 52 (51) 14.6 {149}610 8- 15 60 60 (56) 11.3 {115}430 6 70 71 (70) 16.1 {164}410 90 90 (84) 17.8 {182} 70 70 (65) 17.9 {183}1.151.48BFH90321TNKL900744BEH30371TNKM3007 1055BFH40471TNKM4010 173BFH50471TNKM5010- 9 855BFH60461TNKM6010- 29- 8 2127BEH50471TNKH50120- 25- 10- 252BGH60461TNKH6010 7- 5- 34- 6 431BGH70451TNKH7012280 5 6- 39- 5 956BGH90421TNKH9015470 4 4- 20- 19 1520BGH70551TNKH7015JIS K 6250 Properties : Colored NBR SheetPropertiesHeat-Resistant Aging100 72hOil Resistance100 72hHardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Volume ChangeRate %General PropertiesHardnessType ATensile Strength at ElongationBreakat Break%MPa {kgf/cm2}Item NameWhite NBR Sheet -LASTM#1IRM903Compression Set Elastic Modulus100 24hin Static Shear%Mpa 50 50 (47) 11.1 {113}690 2- 27- 21- 4 3130 65 65 (63)710 2- 23- 17 3 36258.9 {91}0.84JIS K 6380CorrespondingNo.Item NumberBEH50360TNWL5005BEH65350TNWL6507JIS K 6250 Properties : Weather Resistant NBR SheetPropertiesGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break%MPa {kgf/cm2}Heat-Resistant Aging100 72hOil Resistance100 72hHardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Volume ChangeRate %ASTM #1Item NameCompression Set100 72h%JIS K 6380Corresponding No.Item NumberIRM 903TNB6007-O59 (56)9.6 {98}510 4 3- 21- 10 945BFH60331TNKM6007-OTNB9007-O90 (81) 9.9 {101}400 3 16- 35-2 1759BFH90321TNKM9007-OJIS K 6250 Properties : Gasoline Resistant Rubbeer SheetPropertiesGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break%MPa {kgf/cm2}Heat-Resistant Aging100 72h 70 73 (71) 18.2 {186}280100 72hHardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%ASTM #1IRM 903 7-3- 40 9-2Item NameNBR-GOil Resistance25 72hVolume ChangeRate %Compression Set100 72h%JIS K 6380Corresponding No.Item Number34BGH70451TNKL7010-EJIS K 6250These items highlighted in this color are our standard products. !・These products should not be incinerated wherever possible because harmful gas to humans might be generated if they are immo derately burned.・ The user is requested to confirm degree of discoloration and contamination beforehand by using sample in the case of use contacting with the other items.・ The life of these products at actual use are greatly affected by condition of the use. The user is requested to confirm it by using samplein the case of use under severe condition.8
CR SheetChloroprene Rubber SheetFeatures ApplicationsExcels in weather resistance.Excels in oil resistance.Heat resistance is better than NR and NBR. Outdoor rubber mat.Flame-retardant sheet. Properties : Black CR SheetPropertiesGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break2%MPa {kgf/cm }Heat-Resistant Aging100 72hOil Resistance100 72hHardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Volume ChangeRate %Item NameCR Sheet -LCR Sheet -MCR Sheet -HASTM#1IRM903Compression Set70 24h%Elastic Modulusin Static ShearMpaJIS K 6380CorrespondingNo.Item Number 30 30 (29)7.5 {76}670 14 19- 24 4 13321BBH30260TCKL3005 40 40 (36)7.9 {81}540 15 20- 15 7 12520BBH40260TCKL4005 45 44 (43)6.6 {67}440 14 11- 41-2 8620BCH45160TCKL4505 50 50 (49)7.3 {75}400 15 21- 23 4 9016BCH50260TCKL5005 55 56 (56)8.6 {88}360 14 3- 28 6 8616BCH55260TCKL5505 65 65 (64)8.5 {86}310 8- 20- 35 18 8618BCH65350TCKL6507 70 70 (69)7.2 {74}280 15 19- 23 5 4422BDH70240TCKL7005 80 81 (78) 10.8 {110}390 8-3- 31 18 9919BCH80320TCKL8007 90 91 (88) 10.6 {108}190 7 18- 32 1 5421 50 49 (49) 13.9 {142}690 12 5-3-3 105 60 59 (55) 11.5 {117}440 12-2- 34-4 70 72 (72) 10.8 {111}270 7 4- 31-3 80 81 (79) 11.8 {120}200 6 10- 32 50 47 (44) 14.2 {145}400 10-1 60 60 (59) 16.1 {164}570 8- 120.521.141.74BDH90320TCKL900721BCH50460TCKM5010 3214BEH60460TCKM6010 3019BEH70450TCKM7010-3 3320BEH80420TCKM8010- 22-2 8511BCH50560TCKH5014- 28 3 8317BCH60560TCKH6015JIS K 6250 Properties : Colored CR SheetPropertiesGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break%MPa {kgf/cm2}Heat-Resistant Aging100 72hOil Resistance100 72hHardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Volume ChangeRate %Item NameWhite CR-L SheetASTM#1IRM903Compression Set70 24h%Elastic Modulusin Static ShearMpaJIS K 6380CorrespondingNo.Item NumberBCH50260TCWL5005BCH60260TCWL6006TCWL8006 50 50 (49) 10.4 {106}650 11- 10- 28 3 8616 60 63 (61)8.0 {82}630 6- 27- 22 20 8723 80 83 (78)8.1 {83}390 5-8- 26 22 8835BCH80220 60 60 (57)9.0 {92}590 9- 15- 25 22 10428BCH60260TCHL6006Green CR-L Sheet 60 58 (54)9.2 {94}640 3- 28- 30 24 11422BCH60260TCML6005Gray CR-L Sheet0.94JIS K 6250These items highlighted in this color are our standard products. !・These products should not be incinerated wherever possible because harmful gas to humans might be generated if they are immo derately burned.・ The user is requested to confirm degree of discoloration and contamination beforehand by using sample in the case of use contacting with the other items.・ The life of these products at actual use are greatly affected by condition of the use. The user is requested to confirm it by using samplein the case of use under severe condition.9
EPT Rubber SheetEthylene-Propylene Terpolymer Rubber SheetFeatures ApplicationsExcels in weather resistance.Excels in ozone resistance.Excels in cold resistance.Excels in heat resistance. Seal material for window frame.Bulletin Board. Properties : Black Rubber SheetPropertiesHeat-Resistant Aging100 72hGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break2%MPa {kgf/cm }HardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Item NameEPT Sheet -LEPT Sheet -MCompression Set70 24h%OzoneResistanceOzone 50pphm40 20%ElongationElastic Modulusin Static ShearMpaJIS K 6380CorrespondingNo.Item Number 40 43 (43) 16.6 {169}720 6- 22- 1624144h No ChangeBAH40360TEKL4007 50 50 (49)580 10-5- 2623〃BAH50360TEKL5007 60 61 (61) 10.9 {112}560 8-1- 2222〃BAH60360TEKL6007 65 64 (62)8.4 {86}370 9-5- 4720〃BAH65360TEKL6507 70 74 (72)9.7 {99}480 5-4- 3224〃BAH70340TEKL7007 80 81 (79) 12.5 {128}370 9-8- 3231〃BAH80320TEKL8010 90 89 (87) 11.9 {122}430---29〃BAH90320TEKL9007 50 49 (47) 11.7 {119}810 5- 25- 40161000h No ChangeBAH50470TEKM5010 60 60 (59) 12.6 {129}560 8-3- 3210〃BAH60460TEKM6010 65 62 (61) 13.3 {136}630 5-6- 3111〃BAH65460TEKM6510 70 70 (69) 12.0 {122}540 5 9- 3011〃BAH70450TEKM7010 80 77 (76) 13.8 {141}440 5 9- 2214〃BAH80420TEKM80108.4 {86}1.190.8JIS K 6250 Properties : Colored EPT Rubber SheetPropertiesHeat-Resistant Aging100 72hGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break%MPa {kgf/cm2}HardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Compression Set70 24h%OzoneResistanceOzone 50pphm40 20%ElongationElastic Modulusin Static ShearMpaJIS K 6380CorrespondingNo.Item Number1.23BAH65350TEWM6507Item NameWhite EPT Sheet -M 65 66 (63) 11.5 {117}650 4- 26- 17351000h No ChangeGray EPT Sheet -L 60 59 (57)810 4- 26- 393572h No ChangeBAH60360TEHL6007Gray EPT Sheet -M 60 60 (58) 11.0 {112}720 4- 15- 28321000h No ChangeBAH60360TEHM60077.5 {77}JIS K 6250 Properties : Special EPT Rubber Sheet (Heat-resistant grade)PropertiesHeat-Resistant Aging125 72hGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break2%MPa {kgf/cm }HardnessChangeType AChangeRate ofTensileStrength%Item NameChangeRate ofElongationat Break%Compression Set70 24h%OzoneResistanceOzone500ppb(50pphm)40 20%ElongationJIS K 6380CorrespondingNo.Item NumberEPT Special Sheet 40 40 (39) 10.3 {105}660 2 40191000h No ChangeCAH40360TEKH4007A 50 53 (50) 11.6 {118}550 2 5 1217〃CAH50470TEKH5008A 55 56 (53) 14.9 {152}460 7 12-915〃CAH55470TEKH5510A 60 60 (57) 15.0 {153}530 5 3- 1026〃CAH60360TEKH6007A 70 71 (66) 12.7 {130}490 20-716〃CAH70450TEKH7008A 80 80 (77) 16.3 {166}300-3 2-98〃CAH80420TEKH8010A 90 93 (91) 14.3 {146}220 2 1- 2612〃CAH90420TEKH9010AThese items highlighted in this color are our standard products. !JIS K 6250・These products should not be incinerated wherever possible because harmful gas to humans might be generated if they are immoderately burned.・ The user is requested to confirm degree of discoloration and contamination beforehand by using sample in the case of use contacting with the other items.・ The life of these products at actual use are greatly affected by condition of the use. The user is requested to confirm it by using samplein the case of use under severe condition.10
I I R SheetIsobutene-Isoprene Rubber SheetFeatures ApplicationsExcels in chemical resistance.Excels in gas permeability resistance.Excels in heat aging resistance. Packing material for air (gas) duct.Acid resistant packing material. Properties : Black Rubber SheetPropertiesGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break2%MPa {kgf/cm }Heat-Resistant Aging100 72hOil Resistance70 72hChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Volume ChangeRate %HardnessChangeType AItem NameButyl SheetASTM#1Compression Set Elastic Modulus100 24hin Static Shear%MpaJIS K 6380CorrespondingNo.Item NumberIRM903 50 50 (48)7.1 {72}600 17 9- 35――67―AAH50261TIKM5005 65 67 (65)6.7 {68}450 12 15- 49 64 153540.8BAH65252TIKM6505JIS K 6250 Properties : Colored Rubber SheetPropertiesGeneral PropertiesHardnessType AItem NumberTensile Strength at ElongationBreakat Break%MPa {kgf/cm2}Item NameWhite Butyl Sheet 65 64(63)9.0 {92}600TIWL6505JIS K 6250These items highlighted in this color are our standard products. CSM SheetChloro-Sulfonated polyethylene Rubber SheetFeatures ApplicationsExcels in acid / chemical resistance. (strong acid.)Excels in weatherability.Excels in ozone resistance. Acid resistant packing material. Properties : Black Rubber SheetPropertiesGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break2%MPa {kgf/cm }Heat-Resistant Aging100 72hOil Resistance100 72hHardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%Volume ChangeRate % 6 9 20Item NameHypalon Sheet 70 69 (65) 17.4 {177}270ASTM#1IRM903-3 56CS100 24h%Elastic Modulusin Static ShearMpaJIS K 6380CorrespondingNo.Item Number621.03BAH70451THKM7010JIS K 6250 Properties : Colored Rubber SheetPropertiesHeat-Resistant Aging100 72hGeneral PropertiesHardnessType ATensile Strength at ElongationBreakat Break2%MPa {kgf/cm }HardnessChangeType AChangeRate ofTensileStrength%ChangeRate ofElongationat Break%JIS#1VolumeChangeRate%JIS#3VolumechangeRate% 6- 8- 30- 14 40Item NameWhite Hypalon Sheet 60 59 (57) 14.2 {145}640Oil Resistance100 72hCS70 24h%JIS K 6380CorrespondingNo.Item Number40BAH6460THWM6010JIS K 6250These items highlighted in this color are our standard products. !・These products should not be incinerated wherever possible because harmful gas to humans might be generated if they are immo derately burned.・ The user is requested to confirm degree of discoloration and contamination beforehand by using sample in the
White R Cloth Inserted Multilayer ⅰ) Constructional Special Specifications alphabetical A B D E ⅱ) Functional (property) Special Specifications Adhesion test Low temperature test Tear test Water absorption test Flame resistance test Ozone resistance test Contamination test M O P Z Heat aging resistance test Compression strength test
