Transcription
Rig-A-LiteLED Luminaire GuideSuperior LED Technology forHazardous and Severe EnvironmentsFive-Year Warranty
Rig-A-Lite LED LuminairesThe Rig-A-Lite LED luminaires are the perfect combination ofdependability, safety and energy efficiency forfacilities including hazardous and severe environments.Since 1938, we have been at the forefront of lighting technology, providing industrywith intelligent solutions to their lighting dilemmas.As LED technology has continued to improve, Rig-A-Lite has integrated it into ourvision of the future of lighting these specialty environments including petrochemicalrefining, petroleum refining, waste water treatment facilities, pharmaceutical facilites,food processing facilities, power plants and other industrial & manufacturing areaswhere flammable vapors, gasses, ignitable dusts, fibers or flyings are present. OurLED product series are also rated for marine environments, wet locations and heavyhose-down applications- indoors or outdoors.Compared to HID (high intensity discharge) technologies, LED (light emitting diode)technology provides extended life expectancy, greater energy effeciency and reducedmaintenace costs with a comparable or better quality of light.Highly efficient LED drivers provide current regulation for consistent performance in severeenvironments. LED arrays also provide consistent, energy efficient and long life output.Our die cast aluminum and acrylic housings allow for efficient heat sink and UL listed/NEMA rated protection in a traditional style that the industry is familiar with.All of our LED luminaires are fully retrofittable in the field, allowing our customers togrow with the technology while minimizing the cost of doing so.Photometric performance of LED luminaires is evolving quickly. We have made everyeffort to accurately describe the actual performance of our luminaires and willincorporate new technologies to assure maximum performance and energy savings asthey are available.We will continue our commitment to quality byproviding a five year warranty againstmanufacturing defects onall LED luminaires.2
SAFR Series 75 Watt LEDFeatures Glare Free Performance with threaded andfrosted refractors Replaces up to 100 watt Metal Halide and 100watt High Pressure Sodium 60,000 or more hours rated lamp life with 70%lumen maintenance Constant Current 120-277V, 50/60Hz 347/480V 60Hz Junction Temperature: 97º C in a 55º C Ambient Line Transient Protection: 1 KV line to line. 1 KVline to groundMounting & Lens OptionsCertifications Class I, Division 2, Groups A, B, C & D Class II, Division 1, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC Simultaneous Presence Enclosed and Gasketed NEMA 3R, 4X UL 8750,1598,1598A & 844 CUL IP 66 AEx nR II, T4 Tested to LM79 & LM80 standardsStandard MaterialsMounting Styles Include Stanchion (25 & 90 ) Wall Ceiling Pendant Flexible Pendant ConeLens Options Include Type V Refractor Low Profile Clear Globe* Low Profile Frosted Globe* Copper Free Cast Aluminum Alloy Housing Epoxy Powder Coated Stainless Steel Hardware Tempered Glass Globe Stainless Steel Guard Silicone Gaskets* Patent # D637339SCertification GuideClass I, Div.2CLASS Il & lllMODELAMBIENT CGroupsA,B,C & ousPresenceClass I, Zone 2UL 1598AOUTDOORT6T6T3CT3CYESYESAEx nR IIT4T4CULSUPPLYWIRESUITABLETEMP CYESYES901053
SAFR Series 98 Watt LEDFeaturesCertifications Class I, Division 2, Groups A, B, C & D Glare Free Performance with threaded andfrosted refractors Replaces up to 175 watt Metal Halide and 150watt High Pressure Sodium 60,000 or more hours rated lamp life with 70%lumen maintenance Constant Current 120-277V 50/60Hz 347/480V 60 Hz Line Transient Protection: 4 KV line to line. 2 KVline to ground Class II, Division 1, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC Simultaneous Presence Enclosed and Gasketed NEMA 3R, 4X UL 8750,1598,1598A & 844 CUL IP 66 AEx nR II Tested to LM79 & LM80 standardsMounting & Lens OptionsStandard MaterialsMounting Styles Include Stanchion (25 and 90 ) Wall Ceiling Pendant Flexible Pendant ConeLens Options Include Type V Refractor Low Profile Clear Globe* Low Profile Frosted Globe* Copper Free Cast Aluminum Alloy Housing Epoxy Powder Coated Stainless Steel Hardware Tempered Glass Globe Stainless Steel Guard Silicone Gaskets* Patent # D637339Certification GuideClass I, Div.24CLASS Il & lllMODELAMBIENT CGroupsA,B,C & ousPresenceCID2C2 D1Class I, Zone 2UL 1598AOUTDOORT6T6T3AT3AYESYESAEx nR IIT3T3CULSUPPLYWIRESUITABLETEMP CYESYES90105
Catalog Number LogicSAFR 09-L-U -T5G-P-XX112BASIC SERIES SAFRHazardous Location LEDClass I, Division 2, Groups A, B, C & DClass II, Division 1 & 2, Groups E, F & GClass IIISimultaneous PresenceClass I, Zone 2, Groups IIA, IIB & IICEnclosed and GasketedWet LocationsNEMA 3R, 4X; IP66UL 1598, 1598A, 844 & 8750CULABS Type ApprovedRestricted Breathing(Annual Testing Not Required)AEx nR II253 4567GLOBE & GUARDLC Low Profile Clear Globe OnlyLCG Low Profile Clear Globe & GuardLF Low Profile Frosted Globe OnlyLFG Low Profile Frosted Globe & GuardT5 Type V (Symmetric)Closed Bottom Glass RefractorT5G Type V (Symmetric)Closed Bottom Glass Refractor & Guard6MOUNTING STYLEP 3/4" Pendant MountP1 1" Pendant MountC 3/4" Ceiling MountC1 1" Ceiling MountW 3/4" Wall MountW1 1" Wall MountS 1-1/4" 25 Stanchion MountS1 1-1/2" 25 Stanchion MountL 1-1/4” 90 Stanchion MountL1 1-1/2” 90 Stanchion MountK 3/4" Cone TopK1 1" Cone Top7OPTIONS1SS Stainless Steel Inserts (304)FB1 Single Fuse Block 2,3FB2 Double Fuse Block 2,3TB Terminal BlockLAMP CURRENT/LAMP WATTAGE09 75 Watt11 98 WattConsult factory for pricingNot available unless incoming voltage is specified.When installed, one fuse block is provided for 120,277V and two fuse blocks are provided for 208,240 and 480V. Fuse not included. Not available on347V or 480V3 Fuse option not available for marine listed fixtures.1342LAMP TYPEL LEDDRIVER VOLTAGEU 120-277V 50/60HZN 347/480V 60HZ5
SAFJ Series LEDFeatures Glare Free Performance with frosted globe Replaces up to 70 watt Metal Halide and 70watt High Pressure Sodium 60,000 or more hours rated lamp life with 70%lumen maintenance Constant Current 120-277V, 50/60Hz 347/480V 60Hz Total Efficacy of 72.4 Lm/W with Clear Globe Line Transient Protection: 4 KV line to line 2KV line to groundCertifications Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed and Gasketed NEMA 3R, 4X UL1598A, 8750 CUL IP 66 Tested to LM79 & LM80 standardsStandard Materials Copper Free Cast Aluminum Alloy HousingMounting & Lens OptionsMounting Styles Include Stanchion (25 and 90 ) Wall Ceiling Pendant Flexible PendantLens Options Include Low Profile Clear Globe* Low Profile Frosted Globe* Epoxy Powder Coated Stainless Steel Hardware Tempered Glass Globe Stainless Steel Guard Silicone Gaskets* Patent # ientClass I, Div. 2,TemperatureGroups A, B, C, D C4055T3AT3AClass II, Div. 1Groups E & F,Class eTemp C90105UL1598AOutdoorCULYESYESYESYES
SAFJ Series LEDCatalog Number LogicSAFJ 06-L-U - LC-P-XX112 3 4BASIC SERIESSAFJ LEDClass I, Division 2, Groups A, B, C, & DClass II, Division 1 & 2, Groups E & FClass IIISimultaneous PresenceEnclosed & GasketedWet LocationsUL1598A Marine Outside TypeUL 844 Hazardous LocationsNEMA 3R,4XIP66CUL2LAMP CURRENT/LAMP WATTAGE06 45 Watt3LAMP TYPEL LED4DRIVER VOLTAGEU 120-277V 50/60HZN 347/480V 60HZ5567GLOBE & GUARDLC Low Profile Clear GlobeLCG Low Profile Clear Globe & GuardLF Low Profile Frosted GlobeLFG Low Profile Frosted Globe & Guard6MOUNTING STYLEP ¾" Pendant MountP1 1" Pendant MountC ¾" Ceiling MountC1 1" Ceiling MountW ¾" Wall MountW1 1" Wall MountS 1-¼" 25 Stanchion MountS1 1-½" 25 Stanchion MountL 1-¼" 90 Stanchion MountL1 1-½" 90 Stanchion Mount7OPTIONS1SS Stainless Steel Inserts1 Consultfactory for pricing.Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts.7
SXPJ Series LEDFeatures Glare Free Performance Replaces up to 250 watt Metal Halide and 250watt High Pressure Sodium 60,000 or more hours rated lamp life with 70%lumen maintenance Constant Current 120-277V, 50/60Hz 55º C Maximum Ambient Temperature Line Transient Protection: 4 KV line to line 2KV line to groundCertifications Class I, Division 1, Groups C & D Class II, Division 1, Groups E, F & G Class I, Zone I, Groups IIA & IIB Class III Factory Sealed NEMA 3, 4, 4X & 7CD UL 1598, 1598A, 8750, & 844 Tested to LM79 & LM80 standardsStandard Materials Copper Free Cast Aluminum Alloy HousingMounting Options Stanchion Wall Ceiling Pendant Trunnion Baked Epoxy Powder Coating Stainless Steel External Hardware Prismatic Tempered Glass Globe Stainless Steel Guard Silicone GasketsCertification GuideLampRatedAmbient CCatalog #SXPJ10LSXPJ10L8TypeWattsLEDLED9898Class I, Groups C & D,Class 1, Zone 1,Groups IIA, IIB, & IICMountsPendant, Wallor Ceiling405585 (T6)85 (T6)Class II, GroupsE, F & GClass IIIMountsTrunnionorStanchion85 (T6)85 (T6)Pendant, Wall, Ceilingor Stanchion only85 (T6)---Supply WireTemperatureRating,Minimum C9090
Catalog Number LogicSXPJ 10-L-U-GG-P-XX11BASIC SERIESClass I, Divisions 1, Groups C & DClass II, Division 1, Groups E, F & G*Class IIIClass I, Zone 1, Groups IIA & IIBFactory SealedUL1598, 1598A, 8750 & 844NEMA Type 4X, IP66Tested to IESNA LM79 & LM80 standards23 4556* Except Trunnion Mount2LAMP TYPE10 98 Watt (LED Only)3LAMP CURRENT/LAMP WATTAGEL LED4BALLAST VOLTAGEU 120-277V 50/60HZ767GLOBE & GUARDGG Globe and GuardG Globe onlyMOUNTING STYLEP 3/4" Pendant MountP1 1" Pendant MountC 3/4" Ceiling MountC1 1" Ceiling MountW 3/4" Wall MountW1 1" Wall MountS 1-1/4" Stanchion MountS1 1-1/2" Stanchion MountT Trunnion MountOPTIONS¹FB Fuse Block ² ³Consult factory for pricing.Please specify voltage. When installed, one fuse block isprovided for 120 & 277v and two fuse blocks are provided for208 & 240v.3 Fuse option not available for marine listed fixtures.12Catalog logic is for explaining number structure only. Not all combinations are possible. Consult Factory9
XPEX Series LEDFeatures Explosion Proof LED Exit Light Red or green legend Single or dual panel edge lit design LED light source- 25 year life expectancy Maximum 3 watts power consumption Fully integrated electronic circut board andcomponents Integrated battery backup option with threehour operation Emergency fixtures meet or exceed NFPA 70and NFPA 101 standards Energy Star rated Factory sealed Custom colors available Custom legends availableCertifications Class I, Division 1, Groups C & D Class II, Division 1 & 2, Groups E, F & G Class III Class I, Zone 1, Groups IIA, IIB Zone 2, Groups IIA & IIB H2 & IIC UL 1598A Marine Outside Type UL 844, 8750 & 924 IP65 Temperature Class (T-Rating)- T6 Patent Number 7,287,347Standard Materials Copper Free Cast Aluminum Alloy Housing Epoxy Powder Coated Wall/Pendant or End Mount Configurations Acrylic LensCertification re Class I, Div. 1, CGroups C, D40T655T6Class II, Div. 1,Groups E, F, G,Class IIIT6T6SimultaneousPresenceClass I & Class IIT6T6Class I, Zone 1,Groups IIA, IIBT6T6UL1598AOutdoorYESYES
XPEX Series LEDCatalog Number LogicXPEX-2-G-DT-WP-XX1122BASIC SERIESXPEX Explosion Proof LED Exit LightClass I, Division 1, Groups C, & DClass II, Division 1 Groups E, F & GClass IIIClass I , Zone 1, Groups IIA, IIB,Zone 2, Groups IIA, IIB H2 & IICMarine Outside TypeUL 1598A, 8750, 844, 924IP65Temperature Class (T-Rating)-T6NUMBER OF FACES1 Single Face2 Double Face345346LEGEND COLORR RedG GreenVOLTAGE/FREQUENCYDT 120/277V 60HZ24 220-240V 50/60HZOther voltages available- consult factory5MOUNTINGWP Wall/Pendant MountingEB End Bracket6OPTIONS1EM Emergency Battery BackupEU Green Running Man Exit LegendSD Self DiagnosticsX Exit Legend in Other LanguagesLanguage Must Be Specified1Consultfactory for pricing.Operating Temperature RangeTemperature Rating- T6Red LegendGreen Legend 10 C Minimum to 55 C Maximum 10 C Minimum to 40 C MaximumBattery WattageRed without battery- 1.5 WattsRed with battery- 2.5 WattsGreen without battery- 2.3 WattsGreen with battery- 3 Watts11
XPS Series LEDFeatures Explosion Proof LED Multipurpose SignLight Red or green legend Single or dual panel edge lit design LED light source- 25 year life expectancy Maximum 3 watts power consumption Fully integrated electronic circut board andcomponents Integrated battery backup option with threehour operation Emergency fixtures meet or exceed NFPA 70and NFPA 101 standards Energy Star rated Factory sealed Custom colors available Custom legends availableCertifications Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 1598A Marine Outside Type UL 844, 8750 & 924 ETL Listed IP65 Temperature Class (T-Rating)- T6 Patent Number 7,287,347Standard Materials Copper Free Cast Aluminum Alloy Housing Epoxy Powder Coated Wall/Pendant or End Mount Configurations Acrylic LensCertification GuideModelLegendXPSXPSGreenRed12AmbientTemperature C4040Class I, Div. 1,Groups C, DT6T6Class II, Div. 1,Groups E, F, G,Class IIIT6T6SimultaneousPresenceClass I, Zone 1, UL1598AClass I & Class II Groups IIA, IIB OutdoorT6T6YEST6T6YES
XPS Series LEDCatalog Number LogicXPS-2-G-DT-WP-XX1122 3BASIC SERIESXPS Explosion Proof LED Exit Light **Customer must specify sign color and legendClass I, Division 1, Groups C, & DClass II, Division 1 Groups E, F & GClass IIIClass I , Zone 1, Groups IIA, IIB,Zone 2, Groups IIA, IIB H2 & IICMarine Outside TypeUL 1598A, 8750, 844, 924IP65Temperature Class (T-Rating)-T6NUMBER OF FACES1 Single Face2 Double Face4563LEGEND COLORA AmberB BlueR RedG GreenX Other (Consult Factory)4VOLTAGE/FREQUENCYDT 120/277V 60HZ24 220-240V 50/60HZOther voltages available- consult factory5MOUNTINGWP Wall/Pendant MountingEB End Bracket6OPTIONS1EM Emergency Battery BackupX Specify Legend (Cannot Say EXIT)Language Must Be Specified1Consultfactory for pricing.Operating Temperature RangeTemperature Rating- T6Red LegendGreen Legend 10 C Minimum to 55 C Maximum 10 C Minimum to 40 C MaximumBattery WattageRed without battery- 1.5 WattsRed with battery- 2.5 WattsGreen without battery- 2.3 WattsGreen with battery- 3 Watts13
HLEX Series LEDFeatures Hazardous Location LED Exit Sign Red or green legend Single or dual panel edge lit design LED light source- 25 year life expectancy Maximum 3 watts power consumption Fully integrated electronic circut board andcomponents Integrated battery backup option with threehour operation Emergency fixtures meet or exceed NFPA 70and NFPA 101 standards Energy Star rated Factory sealed Custom colors available Custom legends availableCertifications Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 1598A Marine Outside Type UL 844, 8750 & 924 ETL Listed IP65 Temperature Class (T-Rating)- T6 Patent Number 7,287,347Standard Materials Copper Free Cast Aluminum Alloy Housing Epoxy Powder Coated Wall/Pendant or End Mount Configurations Acrylic LensCertification GuideModelHLEXHLEX14Class II, Div. 1,ClassI,Div.1,GroupsE, F, G,AmbientLegendTemperature C Groups C, DClass IIIGreen40T6T6Red55T6T6Simultaneous PresenceClass I & Class IIT6T6Class I, Zone 1, UL1598AGroups IIA, IIB OutdoorT6YEST6YES
HLEX Series LEDCatalog Number LogicHLEX-2-G-DT-WP-XX1122 3BASIC SERIESHLEX Hazardous Location Exit LightClass I, Division 2, Groups A, B, C, & DClass II, Division 2, Groups F & GClass IIIUL 1598A Marine Outside TypeUL 844, 8750, 924IP65ETL ListedTemperature Class (T-Rating)-T6NUMBER OF FACES1 Single Face2 Double Face4345656LEGEND COLORR RedG GreenVOLTAGE/FREQUENCYDT 120/277V 60HZ24 220-240V 50/60HZOther voltages available- consult factory.MOUNTINGWP Wall/Pendant MountingEB End BracketOPTIONS1EM Emergency Battery BackupEU Green Running Man Exit LegendSD Self DiagnosticsX Exit Legend in Other LanguagesLanguage Must Be Specified1Consultfactory for pricing.Operating Temperature RangeTemperature Rating- T6Red LegendGreen Legend 10 C Minimum to 55 C Maximum 10 C Minimum to 40 C MaximumBattery WattageRed without battery- 1.5 WattsRed with battery- 2.5 WattsGreen without battery- 2.3 WattsGreen with battery- 3 Watts15
HLS Series LEDFeatures Hazardous Location LED Multipurpose SignLight Red or green legend Single or dual panel edge lit design LED light source- 25 year life expectancy Maximum 3 watts power consumption Fully integrated electronic circut board andcomponents Integrated battery backup option with threehour operation Emergency fixtures meet or exceed NFPA 70and NFPA 101 standards Energy Star rated Factory sealed Custom colors available Custom legends availableCertifications Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 1598A Marine Outside Type UL 844, 8750 & 924 ETL Listed IP65 Temperature Class (T-Rating)- T6 Patent Number 7,287,347Standard Materials Copper Free Cast Aluminum Alloy Housing Epoxy Powder Coated Wall/Pendant or End Mount Configurations Acrylic LensCertification GuideModelLegendHLSHLSGreenRed16Ambient Temperature Class I, Div. 1, CGroups C, D40T655T6Class II, Div. 1,Groups E, F, G,Class IIIT6T6SimultaneousPresenceClass I & ClassT6T6Class I, Zone 1,Groups IIA, IIBT6T6UL1598AOutdoorYESYES
HLS Series LEDCatalog Number LogicHLS-2-G-DT-WP-XX1122 3456BASIC SERIESHLS Hazardous Location LED Multipurpose Sign Light** Customer must specify sign color and legendClass I, Division 2, Groups A, B, C, & DClass II, Division 2, Groups F & GClass IIIUL 1598A Marine Outside TypeUL 844, 8750, 924IP65ETL ListedTemperature Class (T-Rating)-T63LEGEND COLORA AmberB BlueR RedG GreenX Other (Contact Factory)4VOLTAGE/FREQUENCYDT 120/277V 60HZ24 220-240V 50/60HZOther voltages available- consult factory.NUMBER OF FACES1 Single Face2 Double Face56MOUNTINGWP Wall/Pendant MountingEB End BracketOPTIONS1EM Emergency Battery BackupX Specify Legend (Cannot Say EXIT)1Consultfactory for pricing.Operating Temperature RangeTemperature Rating- T6Red LegendGreen Legend 10 C Minimum to 55 C Maximum 10 C Minimum to 40 C MaximumBattery WattageRed without battery- 1.5 WattsRed with battery- 2.5 WattsGreen without battery- 2.3 WattsGreen with battery- 3 Watts17
MHDA/MHDS Series LEDFeatures Hazardous location marine rated LED Stainless steel mounting brackets Heavy duty injection molded lens withreinforced corners Dual stainless steel lens tethers Ceiling mount or pendant mount options 60,000 or more hours rated lamp life with 70%lumen maintenance 3/4” NPT Aluminum Conduit Hubs Water tight gasket attached to the lens forsuperior ingress protection Line Transient Protection: 4 KV line to line. 2KV line to ground Constant CurrentCertifications Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 1598A Marine Outside Type UL 844, 8750 Tested to LM 79 & LM 80 CSA C22.2 #137 CSA C22.2 #213 ETL Listed 55 C Ambient Temperature IP66Standard Materials Copper Free Cast Aluminum Alloy Housingor 304 Stainless Steel- 316 Stainless SteelOption Available Epoxy Powder Coated White Captive Stainless Steel Latches Acrylic Lens- Polycarbonate Option AvailableCertification GuideModelMHDA/S10L4U18AmbientClass II, Div. 2,Class I, Div. 2 GroupsTemperatureGroups F & G,A, B, C & D CClass III55T4AT4Supply WireSuitableTemperature C105
MHDA/MHDS Series LEDCatalog Number LogicMHDA 10-L- 4 -U-XX112342BASIC SERIESMHDA Aluminum LEDMHDS Stainless Steel LEDClass I, Division 2, Groups A, B, C and DClass II, Division 2 Groups F & GGroup IIIUL 844 Hazardous LocationsUL 1598A Marine Outside TypeUL 8750 LED SafetyCSA C22.2 #137; C22.2 #213ETL ListedTested to LM79 & LM8055 C Ambient TemperatureIP66LAMP CURRENT/LAMP WATTAGE10 80 Watt346556VOLTAGE/FREQUENCYU 120-277V 50/60 HZOPTIONS1P Polycarbonate LensFB Fuse Block2TB Terminal BlockTW Thru WireCable Installations OnlyPM Pendant MountSP Surge Protector316 316 Stainless Steel Housing1Consult factory for pricing.option not available for marine listed fixtures.2 FuseLAMP TYPEL LEDNOMINAL FIXTURE LENGTH4 Four Foot19
MAR2 Series LEDFeatures Hazardous Location Marine Rated LED Cast Aluminum End Caps UV Resistant Non-Metallic Hinges Extruded Aluminum Lens Frame 360 Mounting Flexibility 60,000 or more hours rated lamp life with 70%lumen maintenance 3/4” NPT Aluminum Conduit Hubs Water tight gasket attached to the lens forsuperior ingress protection Line Transient Protection: 4 KV line to line. 2KV line to ground Constant CurrentCertifications Class I, Division 2, Groups A, B, C & D UL 1598A Marine Outside Type UL 844 Hazardous Locations UL 8750 LED Safety Tested to LM 79 & LM 80 CSA C22.2 #137 CSA C22.2 #213 ETL Listed 55 C Ambient TemperatureStandard Materials Copper Free Extruded Aluminum Housing Stainless Steel Cam Action Latches Shatter and Heat Resistant Acrylic LensCertification GuideSupplyAmbientWireClass I, Division 2 GroupsTemperatureSuitableA, B, C & D CTemp CModelMAR210L4U55T4A105MAR210L2U55T4A10520
MAR2 Series LEDCatalog Number LogicMAR2 10 - L - 4 - U - XX11232BASIC SERIESMAR2 LED FixtureClass I, Division 2, Groups A, B, C & DUL 844 Hazardous LocationsUL 1598A Marine Outside TypeUL 8750 LEDCSA C22.2 #137CSA C22.2 #213ETL Listed55 C Ambient TemperatureLAMP CURRENT/LAMP WATTAGE10 80 WattLAMP TYPEL LED3445656NOMINAL FIXTURE LENGTH2 Two Foot4 Four FootVOLTAGE/FREQUENCYU 120 THRU 277 50/60HZOPTIONS1TW End Mounting/Thru WireCable Installations OnlyF Single Fuse2TM Tempered GlassEB Eye Bolt OnlySC Safety Cable with Eye BoltSP Surge Protector1Consult2Fusefactory for pricing.option not available for marine listed fixtures.21
WFH Series LEDFeatures Replaces up to 400 watt Metal Halide Color Temperature: 5,000 CCT (K) CRI: 75 60,000 or more hours rated lamp life with 70%lumen maintenance Total Lumens:200 Watts clear: 11,120 prismatic: 9,636 Constant Current 120-277V, 50/60Hz or 347/480V, 60Hz Up to 180 LEDs Line Transient Protection: 4 KV line to line,2 KV line to ground Standard fixture suitable for freezer applications Fixture suitable for -40 C (-40 F) to 25 C( 77 F) ambient temperature22Certifications Nema Type 4X UL1598 & 8750 CUL NSF Approved Enclosed and Gasketed Tested to LM79 & LM80 standards Hose down testedStandard Materials Continuously welded aluminum construction FDA accepted powder coated finish Stainless steel hardware Extruded silicone lens frame gasket Hinged reflector assembly
WFH Series LEDCatalog Number LogicWFH 175- 24 -4S- CA-U-DH112BASIC SERIESWFH LED Hose-Down High BayNEMA 4XUL1598 Wet LocationsCULWash Down RatedHose Down Tested to 1200psiFire Hose Tested at 65gpmNSF Certified Food Equipment2LED MAXIMUM SYSTEM WATTAGE175 200 Watt (2 X 4) 180 LEDs3NOMINAL LUMINAIRE SIZE24 2 x 4 Foot4NUMBER OF LIGHT STRIPS4S 4 Strips345675LENS TYPECA Clear AcrylicPA Prismatic Acrylic6VOLTAGE/FREQUENCYU 120 thru 277V 50/60 HZN 347 thru 480V 60 HZ7MOUNTINGDH Dual Hub 1/2 in. NPTSH Single Hub 3/4 in. NPTCatalog logic is for explaining number structure only. Not all combinations are possible. Consult Factory23
FPF Series LEDFeatures Unique design tolerates high teperatures,temperature swings and high pressure hosedown No flat surfaces to collect contaminants Enclosed housing eliminates the need forshatterproof lamps 60,000 or more hours rated lamp life with 70%lumen maintenance Constant Current 120-277V, 50/60Hz or 347/480V, 60Hz Up to 180 LEDs Line Transient Protection: 4 KV line to line,2 KV line to ground Standard fixture suitable for freezer applications Fixture suitable for -40 C (-40 F) to 25 C( 77 F) ambient temperature Line Transient Protection: 4 KV line to line. 2KV line to ground Constant Current24Certifications UL1598 Wet Locations UL 8750 LED Safety NSF Certified Food Equipment Enclosed and Gasketed Tested to LM79 & LM80 standards Hose down testedStandard Materials Impact resistant DR acrylic housing Glare free shield Polycarbonate endcaps standard- stainlesssteel available Stainless steel fixed mount kit standardstainless steel chain and band mount kitsavailable Stainless steel external hardware 3 foot lead with cord grip standard- water tightdisconnects available
FPF Series LEDCatalog Number LogicFPF 05L-4-U-XX11234BASIC SERIES1FPF Non Metallic LED FixtureUL 1598 Wet LocationsUL 8750 LED SafetyNSF Certified Food EquipmentLM 79, LM 80253 45OPTIONS2F Single FuseSS Stainless Steel End CapsFixtures are furnished with non-metallic cord grip and 3 ft. long #16AWG 3 conductor type SOA cable.2Consult factory for pricing.1LED MAXIMUM SYSTEM WATTAGE03L 25 Watt (2 foot)05L 50 Watt (4 foot)10L 100 Watt (8 foot)NOMINAL FIXTURE LENGTH2 2 Foot4 4 Foot8 8 FootVOLTAGE/FREQUENCYU 120 thru 277V 50/60 HZ25
CEX Series LEDFeatures Non-metallic Red or Green legend Single or dual panel design LED light source- 25 year life expectancy Maximim 4 watts power consumption Fully integrated electronic circut board andcomponents Integrated battery backup option with threehour operation Emergency fixtures meet or exceed NFPA 70and NFPA 101 standards Energy Star rated Enclosed & gasketed Operating temperature 0 C- 40 C26Certifications Heavy Hose-Down UL 924 Emergency Lighting UL 8750 LED SafetyStandard Materials Acrylic outer water sheild Stainless steel hardware Polycarbonate end caps
CEX Series LEDCatalog Number LogicCEX-L-2-R-W-A-XX12 3 46571BASIC SERIESCEX Composite Exit Sign5HOUSING COLORW White2LAMP SOURCEL LED–Light Emitting Diode63NUMBER OF FACES1 Single Face2 Double Face7VOLTAGEA 120V 60HZC 277V 60HZ4LETTER COLORR RedG GreenOPTIONS1EM Emergency Battery BackupVR Vandal Resistant Hardware1Consultfactory for pricing.27
8500 Hansen RoadHouston, TX 77075713-943-0340 phone713-943-8354 faxwww.rigalite.comRAL-LED-80912
Rig-A-Lite LED Luminaires 2. The Rig-A-Lite LED luminaires are the perfect combination of . dependability, safety and energy efficiency for facilities including hazardous and severe environments.
