WIXLIB

T-101 Drilling MachineSizes: 1/2- to 4-inchesBulletin No: 2000.001.10Version: 05.2015Cross Indexing No: n/aSupersedes: 2000.001.09 (11.2014)1/2" through 4" (DN 15 - DN 100) taps withoutshutdown. It can be used to install 2" and 3"completion plugs in tapping nipples to permitrecovery of tapping valves and to installTDW PIG-SIG Scraper Passage Indicators.Typical SetupFeaturesThe Model T-101B Drilling Machine is availablein two versions*: the standard T-101B with 18" oftravel and the XL Model with 28" of travel.The T-101B and T-101B-XL Drilling Machinesmeet NACE Standard MR0175-93, sulfide stresscracking resistant metalic material for oilfieldequipment. The maximum working pressure is1,480 psi (100 bar) at 100 F (38 C). Its operatingtemperatures are -20 F (-29 C) to 700 F (371 C)at 700 psi (48 bar) for intermittent service.The maximum continuous rating is 350 F (177 C)at 1,025 psi (70 bar). Other features include:BleederValveThreaded ValveAdapterLightweight - 32 pounds (XL is 50 pounds)Hole Saw(or drill)Versatile - 1/2” through 4” tapsOperates to 1,480 psi (2,220 psi for 904Model)T-101 Drilling MachineValveOptionsModel T-101BT.D. Williamson, Inc., is committed toproviding you with the exact product to assistyou in planning, budgeting and meeting thespecifications for your individual applicationneeds. The following options are available:DescriptionDrilling machines are used to makeconnections to pipelines, tanks and plant pipingwithout shutdown and are used to make hot tapsin preparation for plugging machine applications.The T-101 Drilling Machine is furnishedwith a ratchet crank for manual operation.An optional hose-connected, hand-held airmotor can be easily added.The T-101 Drilling Machine is a manualor power-driven machine which taps into pipewhile under pressure. It is used for makingNorth & South America: 1 918 447 5000Data subject to change without notice./Dimensions not for construction unless certified./ISO 9001 Certified* The 904 Drilling Machine is a higher pressure (balanced) version of theT101B XL machine. It is rated at 2,220 psi (150 bar) at 180 F (82 C).For special requirements, such as higher pressure or temperature,consult the factory.Europe / Africa / Middle East: 32 67 28 3611 Registered trademark of T.D. Williamson, Inc. in the United States and other countries./Asia Pacific: 65 6364 8520TM Trademark of T.D. Williamson, Inc. in the United States and other countries.www.tdwilliamson.com/ Copyright 2015 All rights reserved. T.D. Williamson, Inc.

904 Drilling MachineSizes: 1/2- to 4-inches Model 904BBulletin No: 2000.003.01Date: October 2004Cross Indexing No: n/aSupersedes: January 2004FeaturesTypical SetupThe Model 904B Drilling Machine is available inthe XL Model with 28-inches of travel.The 904B Drilling Machine meets NACEStandard MR0175-2002, sulfide stress crackingresistant metalic material for oilfield equipment.The maximum working pressure is 2,220 psi (153bar) at 100 F (38 C). Its operating temperaturesare -20 F (-29 C) to 180 F (82 C) for intermittentservice. The maximum continuous rating is 180 F(82 C) at 1,025 psi (48 bar).The 904B Drilling Machine is a high pressurebalanced machine. At this high pressure, it islimited to a maximum of 4-inch (DN 100) taps. Forspecial requirements, such as higher pressure ortemperature, consult the factory.Other features include:Lightweight 85 pounds (39 kg)2-inch 900#RTJ FlangedValve AdapterBleederValveVersatile 1/2- through 4-inch tapsOperates to 2,220 psiThreaded ValveAdapterOptionsHole Saw(or drill)904 Drilling MachineModel 904BT.D. Williamson, Inc. is committed toproviding you with the exact product toassist you in planning, budgeting andmeeting the specifications for your individualapplication needs. The following options areavailable:DescriptionDrilling machines are used to makeconnections to pipelines, tanks and plant pipingwithout shutdown and are used to make hot tapsin preparation for plugging machine applications.The 904 Drilling Machine is a manual orpower-driven machine which taps into pipewhile under pressure. It is used for making 1/2through 4-inches (DN 15 - DN 100) taps withoutshutdown. It can be used to install 2-inch and3-inch completion plugs in tapping nipples topermit recovery of tapping valves and to installTDW PIG-SIG Scraper Passage Indicators.The 904B Drilling Machine isfurnished with a ratchet crank formanual operation. An optional hoseconnected, hand-held air motor can beeasily added or a hand held hydraulicdrive option is availableISO 9001 CertifiedToll Free1-888-TDWmSon (839-6766) T.D. Williamson, Inc.P.O. Box 3409ValveTulsa, Oklahoma 74101-3409918-447-5100Fax: 918-446-6327www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2006. All rights reserved T.D. Williamson, Inc. / Printed in USA

360 Tapping MachineSizes: 2- to 6-inchBulletin No: 1000.004.05Version: 07.2015Cross Indexing No: n/aSupersedes: 1000.004.04 (04.2011)Model 360A and 360BTypical Tapping SetupDescriptionTapping machines are used for makingconnections to pipelines, tanks, and plant pipingwithout shutdown and are used to make hot tapsin preparation for plugging machine applications.Model 360 Tapping Machines can be eithermanual or hydraulically operated and are used formaking tank and pipe taps from 2” to 6”.Its maximum working pressure is 1,480 psi(100 bar) at 100 F (38 C). Its operatingtemperature is -20 F (-29 C) to 700 F (371 C)at 700 psi (48 bar) for intermittent service. Itsmaximum continuous rating is 350 F (177 C)at 1,025 psi (70 bar).Model 360BTapping MachineSplit-frameBoring BarCutter HolderAdapterCutterFeaturesGasketPilotThe basic machine includes:Lower-in crankMeasuring rodSANDWICH ValveRing gasketBleeder valve and nippleGasketMotor adapterSet of bolts and nutsSTOPPLE Fittingor Tapping FittingLOCK-O-RING bypass gauge OptionsPipelineT.D. Williamson is committed to providing youwith the exact product to assist you in planning,budgeting and meeting the specifications for yourindividual application needs. The following optionsare available:North & South America: 1 918 447 5000Data subject to change without notice./Dimensions not for construction unless certified./The Model 360A Tapping Machine ismanually operated.* For design code options not listed and additional sizes,consult your sales representative.The Model 360B Tapping Machine isair or hydraulic operated.Patented in the United States and in other countries.ISO 9001 CertifiedEurope / Africa / Middle East: 32 67 28 3611 Registered trademark of T.D. Williamson, Inc. in the United States and other countries./Asia Pacific: 65 6364 8520TM Trademark of T.D. Williamson, Inc. in the United States and other countries.www.tdwilliamson.com/ Copyright 2015 All rights reserved. T.D. Williamson, Inc.

660 Tapping MachineSizes: 3- to12-inchBulletin No: 1000.005.06Version: 07.2015Cross Indexing No: n/aSupersedes: 1000.005.05 (06.2015)Model 660CModel 660C Tapping Machines can be eitherair or hydraulically operated and are used formaking pipe and tank taps from 3" to 12" (DN 80to DN 300). Its maximum working pressure is1,480 psi (100 bar) at 100 F (38 C). Its operatingtemperature is -20 F (-29 C) to 700 F (371 C)at 700 psi (48 bar) for intermittent service.Its maximum continuous rating is 350 F (177 C)at 1,025 psi (70 bar).Typical Tapping SetupThis model features a split-frame forlower maintenance costs and ease of packingreplacement.FeaturesThe basic machine includes:Lower-in crankMeasuring rodSplit-FrameRetainer rod pusherRing gasketBoring BarBleeder valve and nippleMotor adapterCutter HolderAdapterSet of bolts and nutsCutterLOCK-O-RING bypass gaugeGasketCapability to set LOCK-O-RING andLOCK-O-RING Plus completion plugsPilotOptions*T.D. Williamson is committed to providing youwith the exact product to assist you in planning,budgeting and meeting the specifications for yourindividual application needs. The following optionsare available:DescriptionTapping machines are used for makingconnections to pipelines, tanks, and plant pipingwithout shutdown and are used to make hot tapsin preparation for plugging machine applications.Tapping machines are also used to setcompletion plugs such as LOCK-O-RING orLOCK-O-RING Plus plugs after completion of hottapping and plugging operations.North & South America: 1 918 447 5000Data subject to change without notice./SANDWICH ValveDimensions not for construction unless certified./Model 660c Tapping Machine can beeither air or hydraulically operated withoptional dual drive.A flywheel can be installed on the tappingmachine. It enhances performance of thetapping machine due to inertia and reducedstress on the gears.Hydraulic feed system can be installed as anoption. It will assist technician to lower thecompletion plug during plug setting process.Europe / Africa / Middle East: 32 67 28 3611 Registered trademark of T.D. Williamson, Inc. in the United States and other countries./GasketSTOPPLE Fittingor Tapping FittingPipeline* For design code options not listed and additional sizes,consult your sales representative.Patented in the United States and in other countries.ISO 9001 CertifiedAsia Pacific: 65 6364 8520TM Trademark of T.D. Williamson, Inc. in the United States and other countries.www.tdwilliamson.com/ Copyright 2015 All rights reserved. T.D. Williamson, Inc.