Transcription
IMACS-8000 / IMACS-3000Enhanced IP Transport PlatformDASAN Zhone SolutionsRadio TowerMPLSEthernetSONETCSIMA 200T1Satelite 00dousereWiPRouterCSIMA8000N/ETSO 3OCIVECTTE LAYOEPR RIVECTTE LAYOEPR REthernet: IP/LANOptical Data: C37.94Serial: RS530/V.35/RS422/RS485/RS232Voice: FXS/FXO/E&M/Bridging/compressionOther: G.703/OCU/Dry-ContactTransportPseudoWire (TDM over IP)SONET (OC-3)EoS (Ethernet over SONET)TDM (T1/E1)Easy MigrationSecure NERC/CIP PlatformMulti-Service CommunicationsPseudoWire (TDM over IP)Integrated DACSEthernet / IP / MPLS SupportDependable CommunicationsHigh AvailabilityAdvanced ManagementI n t e g r a t e d Te l e p r o t e c t i o nIntegrated Serial Server
Technology at work for youCONNECTING YOUR BUSINESS TO THE TECHNOLOGY RESOURCES YOU NEEDFlexible solutions foryour business needsTECHNOLOGY PROVIDINGT O TA L E N D - T O - E N D S O L U T I O N S .HIGH FLEXIBILITY - MINIMAL COSTA P P L I C AT I O N ST D M M I G R AT I O N T O I PIMACS-8000Supports all legacy interfaces over Ethernet/IP using IETF standard PseudoWire Emulation(PWE).Allows legacy traffic connected to the IMACS tobe transported over the customer’s IP network,instead of over T1/E1. PWE provides a migrationpath to IP, without need to replace every non-IPbased device.Interfaces include: Convert traditional analog radio systems to IP Convert legacy serial and audio tone basedSCADA system to modern IP network Convert old FXS/FXO style PBX systems to IPtransport without changing the PBX Convert old FXS Order Wire systems totransport over an MPLS or IP network Convert 2-wire relay control systems to IPtransportThe IMACS PWE support is fully redundant usingtwo PWE cards and can take full advantage oflayer-3 IP level transport failover features usingmodern IP routing protocols.IMACS patented bus architecture simultaneously supportscircuit, packet, and cell-switching on a single platformDASAN Zhone IMACS - Enhanced IP Transport Platform2
POWER UTILITIESKey benefits of IMACSCommunications are vital for the continuous operationof power plants and the distribution of electricity tocustomers. Reliable transmission of mission-criticalvoice and real-time data between power plant controlcenters and remote sites is required to integrate allprocesses and services including network management,Sub-Station Communication: IEEE-1613compliant Security & reliability Simplicity Ease of deploymentautomation and protection. Complete SystemManagementDesigned for the unique needs of electric utilities, Powerful Diagnostic andFault Isolationthe IMACS supports a wide range of specialty traffic,including teleprotection (e.g., IP, EIA-232 and IEEEC37.94 optical interface to protection relays), SCADA,surveillance video, substation automation and alarms,radio,EthernetWAN/IP,POTS Proven, Approved, Deployed Over 150,000 systemsworldwide(E&M/FXS/FXO,ADPCM) and more.Substation HardenedThe IMACS has been designed to operate in harshenvironments such as electric and telephone utilitysubstations and radio communications towers. Fanless Operation IEEE-1613 Compliant GR-63-CORE Issue 1 (NEBS Level 3: Physical) GR-1089-CORE Issue 2 (NEBS Level 3: Electromagnetic) TR-NWT-000295 Issue 2 UL 1950IMACS Substation Application with SONetDASAN Zhone IMACS - Enhanced IP Transport Platform3
NERC SUPPORTThe IMACS includes a wide range of NERC/CIP (CyberInfrastructure Protection) recommendations for the utilityindustry.The included NERC/CIP recommendations are:SyslogRemote/off-shelf logging to centralized logging viaindustry standard SYSLOG protocol. Log data can alsobe collected via SYSLOG and SNMP on the MegaSysTelenium management platform for the IMACS.NTPNTP v3 support for accurate time of day for all logs andfunctions via standard Network Time Protocol.SSHSecure login and console access with encryption over thenetwork via Secure Shell (SSH).Access Control and AuthorizationNERC/CIP recommends individual per user and pergroup privilege levels. The IMACS allows up to 32 distinctprivilege levels for system functions including the testing,configuration and routing control of WAN, voice anddata circuits for maximum flexibility and protection of thenetwork.RADIUS SupportFull support for RADIUS, featuring: Unlimited number of users* Unlimited password complexity* Up to 32 different user definable privilege groups -- all32 IMACS user privilege groups can be mapped touser selectable RADIUS user groups as defined bythe RADIUS server supports One Time Password tokens such as SecurID andCryptoCard * user capacity and password complexity is determinedby the limits of the RADIUS server used** SecurID or CryptoCard are trademarks by theirrespective ownersDASAN Zhone IMACS - Enhanced IP Transport Platform4
HIGHLIGHTSIPR*4The IPR*4, or IP Router card provides an integrated 4-port IP/Ethernet router interface.The IPR*4 card offers a reliable IP router than can be mappedover TDM or Ethernet interfaces, turning the IMACS -8000 intoa modern multiport WAN and LAN router.Features: Up to two cards per shelf 4 x RJ-45 Ethernet ports on front panel Up to 8 high-speed T1/E1 WAN or 128 single DS0 WANper card Remote management of IMACS CPU via IPR*4 Support for HDLC or PPP framingOC-3The IMACS-8000† offers a fully functional OC-3 interface. TheIMACS-8000 further enhances the IMACS-8000 interoperabilitywith modern networks by offering up to two redundant OC-3interfaces for reliable TDM and Ethernet over SONet integrationinto the customer existing network.PseudoWire (PWE)Allows legacy traffic connected to the IMACS to be transportedover customer IP network via PseudoWire Emulation (PWE),instead of over T1/E1 TDM based circuits.The PWE card for the IMACS provides a cost-effective migrationpath to IP, without the need to replace non-IP based devices.†IMACS OC-3 card supported only on IMACS-8000 chassisFeatures: Redundancy 16 Additional add / drop DS1’s 2 x STS-1 (STS-1-2v) of Ethernet over SONET (EoS) Integrated test supportFeatures: TDM Transport CESoPSNANALOG BRIDGE CARD SAToPThe IMACS offer an integrated full feature audio bridge via the TDMoIPAnalog Bridge Card (ABC). Dynamic IP routing support Redundant card support Support for adaptive clocking Flexible jitter buffer,adjustable to individualcustomer networkrequirementsFeatures: High quality DSP engine to combine audio Receive and transmit level control (TLP) adjustable perbridge and per port Up to two cards per shelf (redundant or independentconfigurations supported) Up to 80 bridges per card Up to 240 DS0 aggregate across all bridges Bridge remote timeslots as well as local audio ports Built-in echo cancellationDASAN Zhone IMACS - Enhanced IP Transport Platform5
NETWORK MANAGEMENTTelenium Gold and Telenium Gold 365 network management forFeatures:IMACS (based upon the award winning MegaSys Telenium product) Telenium Goldprovides customers with the fastest and most complete networkmanagement software available today. Telenium for IMACS offersall of the functionality of MegaSys Telenium with additional IMACSspecific features, such as graphical presentation of the IMACS andevery known card type, full SNMP support of every configuration itemand setting and a full range of IMACS specific alarms.Using Telenium Gold for IMACS allows your IMACS network toreach its full potential by providing unsurpassed processing power,network management capabilities, scalability and database growthopportunities. Structured on a high-performance object orienteddatabase, Telenium Gold for IMACS provides essential featuresincluding auto-population of network architecture, circuit managementcapabilities, high throughput alarm processing, network elementbackup and more! Windows based GUIEasy to use MS Windows based client GUI RHEL based serverRed Hat enterprise Linux (RHEL) 6 based managementserver. Alarm Monitoring and historyColor code each IMACS node according to status (green,red, yellow, black,etc.) Point-and-Click ProvisioningClick on any existing IMACS node and graphically adjustany and all settings and parameters such as line speed,port mappings, etc. Remote IMACS firmware updatesUpgrade or downgrade all module cards to any desiredfirmware version. Remote IMACS configuration backup / restoreBackup and restore configuration for any node across thenetwork using the GUI. Circuit level testing and maintenanceInitiate circuit level testing for any service from a single DS0to a full STS-3 pipe featuring a wide variety of diagnostictests and statistics.Telenium Gold for IMACS provides full remotemanagement capabilitiesTelenium Gold 365All of the features of Telenium Gold, plusKey benefits of MegaSysTelenium Managementplatform for the IMACS Auto-configuration Auto-Healing Alarm Monitoring & History Point-and-Click Provisioning Remote Upgrade, Backup &Restore Auto-ConfigurationAutomatically configure services spanning multiple IMACSnodes by graphically selecting start and end nodes andMegaSys Telenium will automatically determine anappropriate path of indicate there are insufficient timeslotsavailable. Auto-healingAutomatically reroute traffic after an outage to the bestavailable path. Services can be prioritized in order ofimportance. Powerful Diagnostic and FaultIsolationDASAN Zhone IMACS - Enhanced IP Transport Platform6
IMACS OVERVIEWAbout the IMACSThe IMACS designed and manufactured in the US,is a flexible and scalable integrated access solutionwith support for 8 T1/E1 (full cross connect),providing a robust set of voice and data accessservices and applications on one manageableplatform. In addition, the IMACS offers a powerfularray of integrated network diagnostic and faultisolation capabilities.Why the IMACS?IMACS Solutions are installed worldwide formission critical applications including electric, gasand water utilities, public safety, transportation andthe military. With over 150,000 systems installedworldwide, the IMACS has earned the reputation asa reliable versatile platform.IMACSIMACS products are consistently praised for theirease of use and built in diagnostic capabilities.The IMACS carries this tradition forward alongwith improved backplane resiliency and additionalmanagement capabilities combined with an all newgraphical management interface co-developed withMegaSys Enterprises, LTD. The IMACS maintainsa built in cross connect fabric, eliminating the needfor separate DACS equipment and reducing space,CAPEX and OPEX requirements.The IMACS allows our customers to gracefullymigrate to IP solutions with the capability of PWE(Pseudowire) and MPLS while still supportingimportant traditional interfaces such as RS232,E&M, FXS, FXO, T1/E1 and SONET.The IMACS offers all the speeds and feeds typicallyneeded at a substation. It is a product that enjoys OVER 50 PLUG-IN SOLUTIONSFOR VOICE, DATA AND IP INTEGRATED PROCESSINGFEATURES- DIGITAL CROSS-CONNECT- T1/E1 CONVERSION- VOICE COMPRESSIONrobust sales, continues to receive significant OPTICAL HSU INTERFACEdevelopment and will be in production for manyTO PROTECTION RELAYS- IEEE C37.94years to come.Robust DevelopmentThe IMACS has evolved beyond the currentIMACS capabilities, providing a robust platform tobest address the requirements of mission criticalapplications. New cards provide improved securityfor NERC/CIP requirements, improved reliability,less downtime as well as significant new features,functions and transport types. COMPLETE SYSTEMMANAGEMENT- LOCAL AND REMOTE- MANAGE UP TO500 NODES- EXTERNAL ALARMMONITORING REDUCED MAINTENANCEWINDOW- MAINTAIN OR UPGRADEReduced Maintenance WindowWITH LITTLE OR NODOWNTIMEDesigned to improve the IMACS uptime. All critical POWERFUL DIAGNOSTICcomponents have been moved to the CPU. TheAND FAULT ISOLATIONnew CPU provides near hitless redundant CPUswitchover times. Primary design goal is to providea more robust platform for mission critical networks,such as public safety and utility sector applications.Service interruption is eliminated or significantlyreduced during maintenance periods for all criticalservices.- MULTIPLE TEST PATTERNS,LOOPBACKS ANDSTATISTICS PROVEN. APPROVED.DEPLOYED- OVER 150,000 SYSTEMSWORLDWIDEB r o a d Va r i e t y o f U s e r I n t e r f a c e sThe IMACS features a variety of user interfaces,including: T1/E1 G.703 Ethernet IEEE C.37-94 FXS/FXO Serial (RS-530/V.11/V.35/RS-232/RS-422/RS-485) E&M (2-wire and4-wire) OCUIMACS is unrivaled in network versatility, supporting circuit,packet and cell-switching on a single platformDASAN Zhone IMACS - Enhanced IP Transport PlatformIMACS provides toll-quality voice compressionusing industry-standard ADPCM7
T E C H N I C A L S P E C I F I C AT I O N SSystem HighlightsApplicationsManagement Interfaces Complete system redundancy PseudoWire NEBS Level 3 Compliant Analog voice (FXS, FXO, E&M) Fully manageable via MegaSys Telenium Management system Voice compression Connectivity: Craft (RS232), Telnet, SSH,modem, SLIP/PPP, FDL time slot 24 (T1) orSAA time slot 31 (E1) Interchangeable set of WAN, subscriberand server cards to match specificapplications Automatic call center distributionconnectivity Fractional T1/E1 LAN services / Ethernet T1/E1 conversionChassisModel 8000 9.12 in. x 17 in. x 15.3 in. /23.16 cm x 43.2 cm x 38.86 cm (HWD)13.34 cm x 44.45 cm x 39.4 cm (HWD)* Leading edge is 18.25 in / 46.36 cm* Model 3000 specifications subject to changeModel 3000 (With optional fan shroud) 7 in. x 17.5 in. x 15.5 in. /17.78 cm x 44.45 cm x 39.4 cm (HWD)* Leading edge is 18.25 in / 46.36 cm* Model 3000 specifications subject to change -48 VDC T1/E1 Auto-Configuration8000: up to 8 local & 16 terminate3000: up to 6 local V.35, RS-530, RS-232, RS-449, RS-422,V.24Environmental Fanless operation (8000 only) IEEE C37.94 IEEE-1613 compliantStandards Compliance ANSI 310-D UL 459, 1459, 1950 ANSI TI.101, TI.107 Dual feed & redundancy ITU-G.703, G.704, G.732, G.735, G.736,G.823, G.824, G.711, G.726 RFC 1769 (SNTP) RFC 2865 (RADIUS) RFC 5424 (Syslog) RFC 802.3u (100BASE-Tx) RFC 802.3i (10BASE-Tx) Output Power: 100W continuous Multi-user environment IP/Ethernet Router AC-to-DC power converter (-48 VDC) -48 VDC Management of configurations, alarms,connectivity & diagnostics SLC96 Output Power: 55W & 135W continuousModel 3000 Auto-Healing DDS FCC part 68, FCC part 15, CTR 12, CTR13, ACA T5016, IEC 297-1 Ring generation (redundant optional) SNMP-based Point & Click graphical user interface CE EN 50081-1, 50082-1, EN 50022, EN60950/A2 120 / 240 VAC Operates on VirtualBox or RHEL 6 OC-3 (8000 only) Bellcore TR-TSY-000008Model 8000 MegaSys Telenium Centralized management of IMACS Bellcore GR-1089-core, TR-NWT-000295PowerManagement SystemInterfacesModel 3000 5.25 in. x 17.5 in. x 15.5 in. / Interface: SNMPClocking Stratum 4 Sources: internal, T1, E1, digitalinterface, external clockingRedundancy CPU Power supply WAN interfaces OC-3 ADPCM Audio Bridge Alternate Map Table (AMT) PWE Card Dual feed & redundancy Ring generationPSIProduct Source International Datacomm, LLC330 Franklin TurnpikeMahwah, NJ 07430201.488.6000 Telwww.psitec.com / sales@psitec.comDASAN Zhone Solutions, Inc.7195 Oakport StreetOakland, CA 94621510.777.7000 Telwww.dasanzhone.comDASAN Zhone Solutions, Inc. (NASDAQ: DZSI) is the first companydedicated solely to delivering the full spectrum of next-generationwireline infrastructure equipment. DASAN Zhone’s Single-Line MultiService architecture (SLMS ), allows carriers to concurrently delivervoice, new premium data and video services over copper or fiberaccess lines. DASAN Zhone provides carriers with an elegant migrationfrom legacy circuit-based technology to packet based networks whilesubstantially reducing operating costs. With deployments at over 300carriers including among some of the world’s largest networks, DASANZhone has enabled carriers to reinvent their businesses. For moreinformation, please visit:www.dasanzhone.comCopyright 2018 DASAN Zhone Solutions, Inc. All rights reserved. DASANZhone , the DASAN Zhone logo, and all DASAN Zhone product namesare registered trademarks of DASAN Zhone Solutions, Inc.Copyright 2018 - 1995 MegaSys Enterprises Ltd., 2018 - 1995 WorthVentures Ltd. All Rights Reserved. MegaSys and Telenium areregistered trademarks of MegaSys Enterprises Ltd. Other brand andproduct names are trademarks of their respective holders. Specifications,products, and/or product names are all subject to change without notice.PSI-DS-IMACS8000-3000 (01-180905-2001)
Modem Phone Satelite Dish Radio Tower PROTECTIVE RELAY PROTECTIVE RELAY IMACS 200 IMACS 8000 IMACS 8000 IMACS 8000 Easy Migration Secure NERC/CIP Platform . DASAN Zhone Solutions. DASAN hone IMACS - Enhanced IP Transport Platform 2 IMACS patented bus architecture simultaneously supports circuit, packet, and cell-switching on a single platform .
