Transcription
Central Texas Metal Roofing Supply Co., Inc.ProSnap 100OVER WOOD DECKSTANDARD DETAILSAustin - Headquarters/Sales Office830 Sagebrush Drive Austin, TX 78758(512) 452-1515 (800) 428-7412Fax (512) 833-7499www.ctmrs.comemail: info@ctmrs.comSeguin - Plant/Sales Office720 West IH 10 Seguin, TX 78155(830) 379-3600 (877) 622-8677Fax (830) 379-8753
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.PROSNAP 100AustinSeguin(800) 428-7412(877) 622-8677INSTALLATIONARCHITECT / ENGINEERING DATA1"3/4"GENERAL DESCRIPTION Rib height : 1”Coverage widths: InquireIntegral batten.Standard striations (optional without).Minimum slope: 3:12Panel attachment: Integral clip (concealed fastener).Panel Substrate: Galvalume or Galvanized.Gauges: 26 or 24Coatings: Acrylic Coated GalvalumePaint GripSilicone Modified Polyester Paint SystemKynar 500 Paint SystemOther substrates and finishes available, please inquire. Use a properly aligned and uniform substructure to avoid panel distortion. Typical substructures include plywood and OSB. All substructure must be properly engineered to meet specified designloads. For illustration purposes, details are shown over plywood decking.Any mechanical attachment device that does not lay flat on the deck will telegraph through thepanels.Panels can be used on roofs with transitions or slope changes.All panels are subject to surface distortion due to improperly applied fasteners. Overdrivenfasteners will cause stress and induce oil canning across the face of the panel at or near thepoint of attachment. Standard CTMRS fasteners are recommended for attachment to metal andwood for all architectural panels. Use maximum caution when fastening to a wood structure.All panels require sealant at eave or valley conditions.Narrower widths, heavier gauges, striations, and embossing minimize the chance of oil canning.Fastener spacing affects the final appearance of the roof. Oil canning is not a reason for fieldrejection.SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 3
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONFASTENER TYPICAL DETAILSFASTENER # 12(10-12 X 1" PANCAKE)18" O.C. MAXPLACE SCREWSIN CENTER OFINDENTIONSFIELD PANEL END PREPARATIONLEAVE A TAB TOFOLD OVER OPENING1"PANEL FOLDING TOOLPANEL FOLDING TOOLPANEL FOLDING TOOLENGAGEMENT OF FOLDING TOOLSUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005FINAL STAGE OF FOLDINGINSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 4
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONRIDGE/HIP TYPICAL DETAILSFASTENER #14 (POP RIVET)4" O.C. OR17FASTENER # 4 ( 4"-14 X 8" LAP)71OR #7 ( 4"-14 X 8" LONG LIFE)20" O.C.SEALANTRIDGE FLASHINGPROSNAP 100PANEL"Z" CLOSUREUNDERLAYMENTBY OTHERSFASTENER # 12(10-12 x 1" PANCAKE)6" O.C.SUBSTRUCTURETAPE SEALERFASTENER # 12(10-12 x 1" PANCAKE)18" O.C.VENTED RIDGEFASTENER #14 (POP RIVET)4" O.C. OR1RIDGE FLASHING7FASTENER # 4 ( 4"-14 X 8" LAP)71OR #7 ( 4"-14 X 8" LONG LIFE)20" O.C.SEALANTTAPE SEALERPERFORATED VENTED"Z" CLOSUREPROSNAP 100PANELUNDERLAYMENTBY OTHERSUNDERLAYMENTBY OTHERSSUBSTRUCTUREFASTENER # 12(10-12 x 1" PANCAKE)18" O.C.SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005SUBSTRUCTUREFASTENER # 12(10-12 x 1" PANCAKE)6" O.C.INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 5
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguin724 Chama Trace, Dripping Springs, TX 78620PROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONVALLEY TYPICAL DETAILSVALLEY WITH OFFSET CLEAT41 2" MIN. FOR STD. VALLEY9" MIN. FOR EXT VALLEYPROSNAP 100PANELVALLEYTRIMSUBSTRUCTUREUNDERLAYMENTBY OTHERSFASTENER # 12(10-12 x 1" PANCAKE)12" O.C.USE SEALANT ATALL PANEL ENDSOFFSETCLEATVALLEY WITH INTEGRATED CLEATPROSNAP 100PANEL41 2" MIN. FOR STD. VALLEY9" MIN. FOR EXT VALLEYPANELVALLEYTRIMUNDERLAYMENTBY OTHERSFASTENER # 12(10-12 x 1" PANCAKE)24" O.C. 1" FROM EDGEOF VALLEY FLASHINGFASTENER # 12(10-12 x 1" PANCAKE)USE SEALANT ATALL PANEL ENDSSUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 6
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONFIXED RAKE TYPICAL DETAILSFINISHING ON MODULEFASTENER #14 (POP RIVET)6" O.C. ORFASTENER # 4 (1 4"-14 X 7 8" LAP)OR #7 (1 4"-14 X 7 8" LONG LIFE)20" O.C.TAPE SEALERBOX RAKEFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.UNDERLAYMENTBY OTHERSFASTENER # 12 (10-12 X 1" PANCAKE)6" O.C.CONTINUOUSCLEAT(OPTIONAL)TAPE SEALERFINISHING OFF MODULETAPE SEALERFASTENER #14 (POP RIVET)6" O.C. ORFASTENER # 4 (1 4"-14 X 7 8" LAP)OR #7 (1 4"-14 X 7 8" LONG LIFE)20" O.C.BOX RAKEFIELD TURNPANEL UP 1"UNDERLAYMENTBY OTHERSFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.FASTENER # 12 (10-12 X 1" PANCAKE)6" O.C.CONTINUOUSCLEAT(OPTIONAL)SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005TAPE SEALERINSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 7
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONALTERNATIVE RAKE TYPICAL DETAILSPROSNAP 100 PANELFIELD CUTAND FOLDFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.FASTENER # 12(10-12 X 1" PANCAKE)18" O.C. MAXUNDERLAYMENTBY OTHERSFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.CONTINUOUSCLEAT(OPTIONAL)SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 8
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONEAVE TYPICAL DETAILSPROSNAP 100 PANELPLACE FIRST FASTENER 6"FROM EAVE, THEN FOLLOWFASTENER PATTERNUSE SEALANT ATALL PANEL ENDSFASTENER # 12(10-12 X 1" PANCAKE)18" O.C.SUBSTRUCTUREFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.FASTENER # 12(10-12 X 1" PANCAKE)20" O.C.CONTINUOUSCLEAT(OPTIONAL)UNDERLAYMENTBY OTHERSSUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 9
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONGUTTER TYPICAL DETAILSPROSNAP 100PANELFROM EAVE, THEN FOLLOWFASTENER PATTERNFASTENER # 14(POP RIVET)24" O.C.TAPESEALERUSE SEALANT ATALL PANEL ENDSGUTTER STRAP24" O.C.UNDERLAYMENTBY OTHERSSUBSTRUCTUREFASTENER # 12(10-12 X 1" PANCAKE)FASTENER # 14(POP RIVET)24" O.C.FASTENER # 12(10-12 X 1" PANCAKE)12" O.C.GUTTERSUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 10
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONFIXED SIDEWALL TYPICAL DETAILSFINISHING ON MODULESIDEWALL PARAPETRAKE FLASHINGFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.TAPE SEALERFASTENER #14 (POP RIVET)6" O.C. ORFASTENER # 4 (1 4 "-14 X 7 8" LAP)OR #7 (1 4"-14 X 7 8" LONG LIFE)20" O.C.UNDERLAYMENTBY OTHERSFASTENER # 12 (10-12 X 1" PANCAKE)6" O.C.TAPE SEALERFINISHING OFF MODULESIDEWALL PARAPETRAKE FLASHINGFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.TAPE SEALERFASTENER #14 (POP RIVET)6" O.C. ORFASTENER # 4 (1 4 "-14 X 7 8" LAP)OR #7 (1 4"-14 X 7 8" LONG LIFE)20" O.C.FIELD TURN PANEL UP1"UNDERLAYMENTBY OTHERSFASTENER # 12 (10-12 X 1" PANCAKE)6" O.C.TAPE SEALERSUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 11
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONPEAK TYPICAL DETAILSFASTENER #14 (POP RIVET)4" O.C. OR17FASTENER # 4 ( 4"-14 X 8" LAP)71OR #7 ( 4"-14 X 8" LONG LIFE)20" O.C.Z CLOSURE W/URETHANE SEALANTPEAK FLASHINGTAPE SEALERFASTENER # 12(10-12 x 1" PANCAKE)18" O.C.FASTENER # 12(10-12 X 1" PANCAKE)20" O.C.TAPE SEALERFASTENER # 12(10-12 x 1" PANCAKE)6" O.C.CONTINUOUSCLEAT (OPTIONAL)SUBSTRUCTUREBY OTHERSUNDERLAYMENTBY OTHERSSUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 12
Central Texas Metal Roofing Supply Co., Inc.Central Texas Metal Rollforming Inc.AustinSeguinPROSNAP 100(800) 428-7412(877) 622-8677INSTALLATIONENDWALL TYPICAL DETAILSSIDINGEND WALL / HIGH SIDE EAVE FLASHINGFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.FASTENER #14 (POP RIVET)4" O.C. ORFASTENER # 4 (1 4 "-14 X 7 8" LAP)OR #7 (1 4 "-14 X 7 8" LONG LIFE)20" O.C.TAPE SEALER"Z" CLOSURE W/SEALANTUNDERLAYMENTBY OTHERSFASTENER # 12(10-12 X 1" PANCAKE)6" O.C.SUBSTRUCTUREFASTENER # 12(10-12 X 1" PANCAKE)18" O.C.CAULKTAPE SEALERFASTENER # 13 (DRIVE PIN)20" O.C.ALTERNATE COUNTERFLASHINGFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.CAULKCOUNTERFLASHINGFASTENER # 12(10-12 X 1" PANCAKE)20" O.C.END WALL / HIGH SIDEEAVE FLASHINGEND WALL / HIGH SIDEEAVE FLASHINGSUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE 8/1/2005INSTALLATION DETAILS ARE FOR ILLUSTRATION PURPOSESONLY AND MAY NOT BE APPROPRIATE FOR ALL CONDITIONS.PS100 13
central texas metal roofing supply co., inc. central texas metal rollforming inc. prosnap 100 installation installation details are for illustration purposes only and may not be appropriate for all conditions. fastener typical details engagement of folding tool final stage of folding field panel end preparation fastener # 12 (10-12 x 1" pancake .
