Transcription
BenchMate QC INSTRUCTIONS #004-839 and #004-840CONTENTS1. INSTALLATION. 22. HEIGHT ADJUSTMENTS. 33. CHANGING QC FIXTURES. 44. INSTALLATION OF THE HANDREST. 45. INSTALLATION OF THE THIRD-HAND ATTACHMENT. 56. MAINTENANCE. 5PARTS LIST #004-839 AND #004-840. 6PARTS LIST #004-840. 8Page 1 of 8LIT-408
1. INSTALLATIONFIG. 1.1FIG. 1.2Sold Separately#004-559FIG. 1.3LIT-408Page 2 of 8 13 8"(34.925 mm)Included 13 8"(34.925 mm)
2. HEIGHT ADJUSTMENTSFIG. 2.1Hex BoltsFIG. 2.2Knob-Centered PositionPage 3 of 8LIT-408
3. CHANGING QC FIXTURESFIXTURE REMOVALFIG. 3.2ATE ENHMFIG. 3.3EMPORIA, KS USAATE ENHMATE ENHMEMPORIA, KS USAATE ENHMATE ENHMEMPORIA, KS USAATE ENHMRECOEMPORIA, KS USAATE ENHMFIG. 3.5ATE ENHMATE ENHMATE ENHMWARNINGMake sure QuickChangefixture is seated fully beforetightening with mandrel knob.A fixture can be ejected withforce if not properly seatedwhen tightening.BENCRECORECOBENCBENCRECORECOBENCFIG. 3.6EMPORIA, KS USAEMPORIA, KS USAATE ENHM4. INSTALLATION OF THE HANDRESTFIG. 4.1LIT-408FIG. 4.2Page 4 of 8BENCFIXTURE INSTALLATIONFIG. 3.4ATE CORECOBENCFIG. 3.1FIG. 4.3
5. INSTALLATION OF THE THIRD-HAND ATTACHMENTFIG. 5.2FIG. 5.1Third-Hand Attachments#004-546, #004-646Sold Separately6. MAINTENANCEFIG. 6.1FIG. 6.2NO WATERNO SOAPNO WATERSynthetic LubeSold Separately#022-162NO SOAPFOAM SEALFIG. 6.3Synthetic LubeSold Separately#022-162Replacement #004‑126PLASTIC INSERTSFIG. 6.4Replacement (#004‑090 or#004-558 pkg. of 10)Page 5 of 8LIT-408
BenchMate QC PARTS LIST #004-839 and #004-840004-865004-876004-876004-876004-080 X2004-876022-539 X2022-535 X2004-446004-087003-140002-217 3002-489 X2004-088002-247 X2044-244004-091044-290002-217 X2044-243002-510 X2022-193 X2002-511 X2004-544 X2LIT-408Page 6 of 8004-442
PART 44-290DESCRIPTION#10-32 X 3/8 SHCS BLKWASHER .191 X .628 X 16 GA1/4-20 X 5/8 SHCS BLKBEARING, THRUSTSPRING, DISCSCREW, THUMBPIN, DRIV-LOK 1/8 X 5/8 N PHALABEL, GRSBEVELED RETAINING BLOCKMOUNTING PLATE (BEVELED)COLLARWASHER, FLAT FRICTIONCUPPED FRICTION WASHERLABEL, BENCHMATEBLOCK, BENCHMATE ARMMOUNTING PLATEHAND RESTCLAMP KNOBCLAMP TUBEKNOB ASSY 3/8-24ACCESSORY PACK ENCORE 1 AXISCOMPLETE QUICK CHANGE JAW ASSEMBLYENCORE QC TOOL RECEIVER SUB ASSEMBLYWASHERDRIV-LOC PIN .156 X .625 TYPE HTHUMB SCREWARMLABEL B/M ENCORE 1 AXISHAND REST 56 Bench Pin included with #004-840 BenchMate Encore QCStone Setter’s Package.Page 7 of 8LIT-408
BenchMate QC PARTS LIST #004-840#004-877 HORIZONTAL I.D. RING HOLDER INCLUDED WITH #004-840 STONE SETTER’S 44-238024-298PART 8DESCRIPTIONQTYACCESSORY MOUNT1INSIDE RING HOLDER HORZ STD HEIGHT1SET OF 10 MOLDED ID MANDRELS WITH 21EXPANSION CONES BAGGEDDRIVE LOC PIN11/4-28 X 7/8LG Z/P COUPLER NUT 3/8 HEX15/16-18 SOCKET HEAD SET SCREW X 7/81DRAWBAR FOR NEW STYLE ID RING HOLDER1FRAME MOUNTED MANDREL EXPANSION CONE 1DRAW BAR KNOB FOR ID RING HOLDER1DRAWBAR FOR STACKED MANDRELS1CENTER CONE FOR STACKED MANDRELS1#004-878 VERTICAL I.D. RING HOLDER INCLUDED WITH #004-840 STONE SETTER’S ART 42024-298LIT-408Page 8 of 8DESCRIPTIONWRENCH, 5/32" ALLENACCESSORY MOUNTINSIDE RING HOLDER VERT STD HEIGHTSET OF 10 MOLDED ID MANDRELS WITH2 EXPANSION CONES BAGGEDDRIVE LOC PINFLANGED BUTTON HEAD CAP SCREW5/16-18 SOCKET HEAD SET SCREW X 7/8900 Overlander Road Emporia, KS 66801 USA800-835-3519 620-343-1084 Fax: 620-343-9640grs@grstools.com www.grstools.comLast Update: 2021-09-23QTY1111111
004-114 label, benchmate 1 004-299 block, benchmate arm 1 004-437 mounting plate 1 004-442 hand rest 1 004-445 clamp knob 1 004-446 clamp tube 1 004-544 knob assy 3/8-24 2 004-733 accessory pack encore 1 axis 1 004-865 complete quick change jaw assembly 1 004-876 encore qc tool receiver sub assembly 1 022-193 washer2
