Transcription
Thank you for choosing VALLEY CHROME PLATING, INC. as your source for chromeplated and stainless truck bumpers. For over 40 years we have built our reputation on qualitybumpers, exceptional service and competitive pricing. We value your continued business andwould like to have your comments on our products or service.LIMITED WARRANTYVALLEY CHROME PLATING, INC. extends a warranty against rusting or peeling of thepolished chrome plated surfaces for a period of one year. The bumper is warranted for oneyear against defects in materials or workmanship. This warranty does not apply if the bumperis exposed to corrosive environments or other abnormal conditions. Warranty is void if anypart of the bumper has visible damage caused by impact of any type, regardless of where thedamage to the bumper is in relation to the defect. Altering the bumper in any manner alsovoids the warranty.The VALLEY CHROME PLATING, INC. warranty applies to the original purchaser and isin lieu of all other express warranties for a period of one year from the date of purchase fromVALLEY CHROME PLATING, INC. should the bumper appear to be defective within thewarranty period, please call the factory for instructions.This warranty is limited to the provisions shown. VALLEY CHROME PLATING, INC.does not assume responsibility for the cost of removal, installation of the bumper, or anyconsequential expense.Corrosive environments include, but are not limited to: salt or other abrasive coverings puton the road to limit ice or freezing, road grinding, sand or sandstorms, following othervehicles closely causing abrasive damage, etc. Please call for a test to measure the amount ofcorrosion that may void the warranty.RETURN POLICYWe may consider photographs of the bumper and defect for warranty purposes in lieu ofreceiving the actual bumper. Please call before acting on any warranty. Defective itemsmust be returned to our Clovis, California facility with a copy of the original invoice,FREIGHT PREPAID. Returned items will be replaced free of charge and shipped, freightprepaid with the dealers next stock order upon confirmation of our responsibility of thedefect. A return authorization number must accompany all items. Items returned withoutprior authorization or found to be free of defects may be denied credit. We reserve the rightto charge a 15% restocking fee.
New Products and UpdatesPlease visit our website for new products and updates@WWW.VALLEYCHROME.COMEnvironmental PolicyValley Chrome Plating, Inc. is committed to environmental and regulatory compliance andwishes to partner with their employees and neighbors to create a safer workplace andenvironment. Valley Chrome Plating, Inc. has been committed to this principle for well over 25years and has become known as an industry leader in environmental compliance.A.This process has been initiated and the following goals have been achieved:1. We have become a zero discharge facility.2. We have improved processes and reduced waste streamsusing best available technology and new technologies.3. We have increased recycling and reduced waste.B.V.C.P. will strive to prevent releases to the atmosphere, land and water by:1. Monthly training of employees.2. Daily site inspections.3. Monthly site inspections by a trained Safety Committee.4. Period inspections by off site consultants.5. Continuing to exercise pollution prevention programs.6. Spill Response/Prevention Training. These policies will beperiodically reviewed to achieve our ultimate goal ofpreventing damage to the environment and its inhabitants.7. Conducting joint training with the Clovis Haz/Mat team ofthe nationally known Clovis Fire Department.Valley Chrome Plating has earned the National Partnership for Environmental Priorities(NPEP) award of excellence for reducing HEX Chrome and Lead usage.I
Understanding the VALLEY CHROME part numbering systemBasic part numbers consist of 8 digits, before adding custom options such as lights, universalmounting system, etc. Remember that letters do not match makes or models.Using x’s instead of the actual numbers, a basic part number can be shown as:(1) (2) (3) (4) (5) (6)(7) (8)XX–XXXX–XXX(1) The first digit indicates MAKE of truck. (H is for Peterbilt). These letters are listedalphabetically in the order of the truck manufacturers. A Autocar B Ford etc.X(2) The second digit indicates MODEL of truck. Generally, these letters indicate in whichorder we began manufacturing that model. For example, HA 359 PETE, HC 379HD 375 etc.X(3) The third digit is for lights, 0 no lights, 1 round lights, 2 rectangle lights, etc.X(4) The fourth digit is for a step hole. Note that some people may use a hitch hole as a step,but the primary use is the determining factor. 0 no step, 2 center step, etc.X(5) The fifth digit is for hitch holes. 0 no hitch, 1 hitch holes, 9 bolt holes for anexternally mounted hitch. Some trucks will have two hitch holes (FE model KW), andsome will have one center hole (HC model Pete). A “1” will get the proper hitch.X(6) The sixth digit is for vent holes. Vent holes may also be single or double, etc.0 no vents, 1 with vent holes. Again, the “1” will get the proper vent for that model.X(7,8) The last two digits are always together and indicate the style and depth of the bumper.06 18” square rolled ends, 02 16” taper, 07 16” gullwing, 51 20” boxed ends, etc.Please remember if you have a question about which hole is proper for that model you mayalways go to the catalog and see which hole we have designated for that option. Look for thedrawing that only has that option and see where we have put that number under the drawing.For options such as oval lights and other kinds of lights they should always go in the sameorder at the end of the standard part number. The order is ovals, round, millennium, licenseplate holes, and universal mount.There are additional notes and diagrams on options for bumpers at the front of the catalog andlight and cut out options at the back of the catalog. Please do not hesitate to call us if you haveany questions or are unsure of the part number you are trying to build.II
TABLE OF CONTENTSPART NUMBER IDENTIFICATION .IIIAUTOCAR .1FORD.LN,LT,LTN,LTL,800,8000,900,9000 .AEROMAX SET BACK AXLE L,LS,LA,LTS,LTA,9000 .LST SET BACK AXLE .1980 -2003 F SERIES SET BACK AXLE .2005 AND NEWER F650 SUPER DUTY.2-322223FREIGHTLINER.PRIOR TO 1984 COE AND CONV.1984 AND NEWER COE AND CONV. FREIGHTLINER CLASSIC.2000-2002 CLASSIC .2003 CLASSIC .2004-2007 CLASSIC XL DAY CAB .1986 AND NEWER CONV. SET BACK AXLE.2004-2007 CLASSIC XL .2008 CLASSIC XL .CORONADO .1986 AND NEWER CONV. SET BACK AXLE 120 SERIES.FLD 112 SEVERE DUTY SET BACK AXLE.1989 AND NEWER COE .FLC 112.FLD 112.FLD 120.COMBINATION OF FLD112 & FLD120.1989 AND NEWER CONV. SET BACK AXLE FLD 112, 120 .COLUMBIA SET BACK AXLE .CENTURY CLASS, 2004-2007 COLUMBIA .2008 AND NEWER COLUMBIA .2008 AND NEWER CENTURY CLASS.2008 AND NEWER CASCADIA.FL 50, 60, 70, 80 (MIDRANGE) .FL112 (MIDRANGE).2003 AND NEWER BUSINESS CLASS M2 .2004 AND NEWER BUSINESS CLASS M2 112, M2 106 NERAL .BRIGADIER.BRIGADIER HIGH CAB.1982 AND NEWER ASTRO .GMC TOPKICK / CHEVY KODIAK.GMC 7000, C60, C65, C70,.2004 AND NEWER GMC C4500, C5500, 6500, 7500.18-2018181819192020INTERNATIONAL .CONV 4200,4300 .2200,2500 S .1700,1800,1900 S .COE 9670,CONV. 9370, 9300.CONV. 9370 SET BACK AXLE.MIDRANGE 4600,4700,4800,4900,8100 W/4 MOUNTING HOLES EACH SIDE.MIDRANGE 4600,4700,4800,4900,8100 W/2 MOUNTING HOLES EACH SIDE.1998-1999 EAGLE 9900.2000 AND NEWER 9900 IX.PRIOR TO 1997 CONV. 9400 SET BACK AXLE .1997 AND NEWER 9100,9200,9400 .PRIOR TO 1996 9200 .2008 AND NEWER PROSTAR.4300 DT466, 7400 DT466 .21-272121212222232324242525252627IV
TABLE OF CONTENTSKENWORTH.1967-1983 COE K100C.1984 AND NEWER COE K100E .1967-1981 CONV. W900A .1982 AND NEWER CONV. W900B, W900L .LOGGER .1989 AND NEWER W900S .2008 AND NEWER W900S .1986-2003 T800 CONV. .T800 WIDENOSE.2004 AND NEWER T800B .1994 AND NEWER T450B .1987 AND NEWER T600.T660 SET BACK AXLE .T300 SET FORWARD AXLE.T270, T370 SET BACK AXLE .T400, T440 SET BACK AXLE .28-3528282829293030313132333434353535MACK .R,RL,U,F,FL,FS.SUPERLINER CONV., CRUISELINER COE.R-600, R-700 .F-600 .VALUELINER, WESTCOAST .F-700,INTERSTATE.1986-1987 MH COE, SUPERLINER II CONV. .1989 WESTERN CONTRACTOR CONV. .LOGGER .1994-2004 CH SET FORWARD AXLE.2005 - 2007 CHN613 SET FORWARD AXLE .1994 -2004 CH613 SBA SET BACK AXLE .PRIOR TO 1994 613 SET BACK AXLE .1994-2003 CL W/101/2" BREAK BACK .MR,MD .RD688, RD690 .PRIOR TO 1976 R600.RD SET BACK AXLE .2003 AND NEWER GRANITE BRIDGE FORMULA.2001-2004 CX613, VISION .2005 AND NEWER CXN613, 2007 AND NEWER CXP613 .RD688DM.2008-2010 CXU613 .GRILL 4444454545PETERBILT .1967-1986 CONV. 359,1967-1980 COE 352 .1987-2006 CONV. 378,379 .2007 AND NEWER CONV. 388, 389, 365.1987 AND NEWER CONV. 375 .PRIOR TO 1987 LOGGER.1987 AND NEWER LOGGER .357 LOGGER, 378 SET BACK AXLE .1987-1996 CONV. 377, PRIOR TO 1991 377AE SET BACK AXLE .1997 377AE SET BACK AXLE .PRIOR TO 1991 CONV. 377 SET FORWARD AXLE .1991 AND NEWER CONV. 377AE SET FORWARD AXLE .1981 AND NEWER 362 COE .385 CONVENTIONAL SET BACK AXLE 112", 120" BBC.320 COE.1997 AND NEWER 330 SET FORWARD AXLE .2006 AND NEWER PB335 SET FORWARD AXLE .2007 AND NEWER 367.362E SET FORWARD AXLE.2008 AND NEWER 384.46-5446464647474748484849494950505151515252V
TABLE OF CONTENTSPETERBILT CONT.2006-2009 386 SET BACK AXLE.1999-2001 387 SET BACK AXLE.2002 AND NEWER 387 SET BACK AXLE .579 SET BACK AXLE.46-5452535354WESTERN STAR .COE WESTERN STAR .CONV. WESTERN STAR.1989 AND NEWER CONV. WESTERN STAR, 4964 CONSTELLATION .1985-1988 WESTERN STAR .2008 AND NEWER 4900EX .2007 AND NEWER 4900SA .2008-2009 4964FX .55-5755555556565757WHITE .ROAD BOSS 2, ROAD COMMANDER 2 .COE EXPEDITOR 2 .585858VOLVO .1988-1997 WA MODEL SET BACK AXLE .VLN610, VNL660, VNL770, SET BACK AXLE .2004 AND NEWER VNL64T, 630, 670, 780.1998-2003 VNM42T, VNM64T SET BACK AXLE .2004 AND NEWER VNM SET BACK AXLE .VNL42T, VNL64T SET BACK AXLE .VOLVO WHITE SET BACK AXLE.1995 WG MODEL SET BACK AXLE.2006-2008 830 MODEL SET BACK AXLE .59-61595959606060616161STERLING.2005 LT7501 SET FORWARD AXLE.2004 AND NEWER ACTERRA SET FORWARD AXLE .2005 AND NEWER LT9513, LT9500 SET BACK AXLE.STERLING AT9500 SET BACK AXLE .62-6362626263REAR BUMPERS .REAR LIGHT BARS .REAR LIGHT PANELS.REAR LIGHT BAR HALVES.64646464AIR DAMS, UNIVERSAL MOUNTING PLATES .65CUSTOM OPTIONS .UNIVERSAL BUMPERS.CUSTOM LIGHT OPTIONS .LICENSE PLATE HOLES AND LICENSE BOXES.CUSTOM OVAL AND ROUND LIGHTS.BOXED END LIGHTS .66-686666666767CUSTOM TEXT .LIGHT BOX, CUSTOM TEXT STYLES .6868VI
Notes
This warranty does not apply if the bumper is exposed to corrosive environments or othe r abnormal conditions. Wa rranty is void if any part of the bumper has visible damage caused by impact of any type, regardless of where the damage to the bumper is in relation to the defect. Altering the bumper in any manner also voids the warranty.
