WIXLIB

VIPER S SERIESdesign . per formance . technologySECURITYLIGHTING Small Viper LuminaireOPTICSSPECIFICATIONSThe Beacon Viper luminaire is available with a widechoice of different LED Wattage configurationsand optical distributions designed to replace HIDlighting up to 400W MH or HPS.Construction: Manufactured with die cast aluminum. Coated with a polyester finish that meetsASTM B117 corrosion test requirementsand ASTM D522 cracking and loss ofadhesion test requirements. External hardware is corrosion resistant. One piece optical cartridge system consistingof an LED engine, LED lamps, optics, gasketand stainless steel bezel. Cartridge is held together with internal brassstandoffs soldered to the board so that it canbe field replaced as a one piece optical system. Two-piece silicone and micro-cellularpolyurethane foam gasket ensures aweather-proof seal around each individual LED.Electrical: In addition, Viper can be specifiedwith SiteSync wireless control systemfor reduction in energy and maintenance costswhile optimizing light quality 24/7. For moredetails, see ordering information or 4 1/8”Installation: Mounting options for horizontal arm, verticaltenon or traditional arm mounting available.Mounting hardware included.Finish: IFS polyester powder-coat electrostaticallyapplied and thermocured. IFS finish consists ofa five stage pretreatment regimen with apolymer primer sealer and top coated with athermoset super TGIC polyester powder coatfinish. The finish meets the AAMA 2604performance specification which includespassing a 3000 hour salt spray test forcorrosion resistance and resists cracking orloss of adhesion per ASTM D522 and resistssurface impacts of up to 160 inch-pounds.Certifications/Ratings: DesignLights Consortium (DLC) qualified,consult DLC website for more details:http://www.designlights.org/QPL Certified to UL 1598, UL 8750 and CSAC22.2 No.250.0 IDA approved This product is approved by theFlorida Fish and Wildlife ConservationCommission. Separate spec available llA21.75”(552 mm)CWeight:B11.25”15.0 lbs16.75”(6.8 kg)(425 mm) (286 mm)Side ViewBack ViewRectangular Arm (A)Accepts2 3/8” ODtenon, min4” long.Side ViewBack View2-3/8” OD Slip Fitter (MAF)18.75”6.00”5.00”2-3/8” Adjustable Knuckle (K)limit to 45O tilt2.38”22.25”4x 0.50”5.50”Wall Bracket (WB)24.75”7.75”AD Decorative ArmCERTIFICATIONS/LISTINGS1”4.88”0.56”Web: www.securitylighting.com2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642Copyright 2016 Security Lighting, a division of Hubbell Lighting, Inc.All Rights Reserved. Specifications subject to change without notice. Printed in U.S.A. SL0001 08/17EPA.67 ft2MOUNTING OPTIONS6.00”Warranty:Five year limited warranty for more information ont6.63” 100V through 277V, 50 Hz to 60 Hz (UNV), or347V or 480V input. Power factor is .90 at full load. Dimming drivers are standard, but mustcontact factory to request wiring leads forpurpose of external dimming controls. Component-to-component wiring within theluminaire may carry no more than 80% ofrated load and is certified by UL for use at600VAC at 90 C or higher. Plug disconnects are certified by UL for useat 600 VAC, 13A or higher. 13A ratingapplies to primary (AC) side only. Fixture electrical compartment shall contain allLED driver components and shall be providedwith a push-button terminal block for ACpower connections. Surge protection - 20kA. Optional 7-pin ANSI C136.41-2013 twist-lockphoto control receptacle available. Compatiblewith ANSI C136.41 external wireless controldevices. Lifeshield Circuit - protects luminaire fromexcessive temperature. The deviceshall activate at a specific, factory-presettemperature, and progressively reduce powerover a finite temperature range. Operation shallbe smooth and undetectable to the eye.Thermal circuit is designed to “fail on”,allowing the luminaire to revert to full powerin the event of an interruption of its powersupply, or faulty wiring connection to thedrivers. The device shall be able to co-existwith other 0-10V control devices (occupancysensors, external dimmers, etc.).Controls/Options: Available with an optional passive infrared(PIR) motion sensor capable of detectingmotion 360 around the luminaire. Whenno motion is detected for the specified time,the Motion Response system reduces thewattage to factory preset level, reducing thelight level accordingly. When motion isdetected by the PIR sensor, the luminairereturns to full wattage and full light output.Please contact Beacon Products if projectrequirements vary from standard configuration. Available with Energeni for optional setdimming, timed dimming with simple delay, ortimed dimming based on time of night ended Use:PRODUCT IMAGE(S)

VIPER S SERIESdesign . per formance . technologySECURITYLIGHTING ORDERING INFORMATIONSmall Viper LuminaireORDERING EXAMPLE: RIESLED ENGINEVPS Viper24L-55 55W, LEDarray36L-65 65W, LEDarrayCCT/CRI7ROTATION3K7 3000K, 70 CRILeave blank for norotation4K7 4000K, 70 CRI5K7 5000K, 70 CRI36L-80 80W, LED60L-136 136W, LEDarrayL5 Optic rotation leftR5 Optic rotation rightDISTRIBUTIONarray48L-110 110W, LEDarrayFR2344W5QM5R5WType 1/Front RowType 2DBTBMTPSWHTCCBlack Matte TexturedPlatinum Silver SmoothBC Backlight control (limitedto Type 4W only)White TexturedCustom Color (RAL#)Type 4 WideMOUNTINGType 5QMA Rectangular Arm (formerly RA) forType 5R (rectangular)Type 5W (round wide)square or round pole270 shield front or back270 shield left or rightAD Universal Arm for square pole90 shield front or back90 shield left or rightFull shieldMOUNTING ACCESSORIES2.4”-4.1” Round Pole Adapter for AD arm4.2”-5.3” Round Pole Adapter for AD armCONTROL OPTIONSMAF Mast Arm Fitter (formerly SF2) for2-3/8” OD horizontal armOK Knuckle (formerly PK2) limit to 45tilt or 2-3/8” OD horizontal arm orvertical tenonWB Wall Bracket7PR 7-Pin Receptacle only (shorting cap, pho-to control, or wireless control providedby others)7PR-SC 7-Pin Receptacle w/Shorting Cap7PR-TL 7-Pin Receptacle w/Twist Lock photocontrolSCP/ F1,2,6 Programmable Occupancy Sensor w/daylightAD3 Universal Arm for 2.4”-4.1” roundpoleAD4 Universal Arm for 4.2” -5.3” roundpoleAD5 Universal Arm for 5.5” -5.9” roundpoleAD6 Universal Arm for 6.0”-6.5” roundpole5.5”-5.9” Round Pole Adapter for AD arm6.0”-6.5” Round Pole Adapter for AD armPRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lightingcontrol option, additional information will be required to complete the order. The SiteSync Commissioning Formor alternate schedule information must be completed. This form includes Project location, Group information, andOperating schedules. For more detailed information please visit www.hubbell-automation.com/products/sitesync/ orcontact Hubbell Lighting tech support at (800) 345-4928.SiteSync fixtures with Motion control (SWPM) require the mounting height of the fixture for selection of the lens.SiteSync onlySiteSync with Motion ControlNot available with other wireless control or sensor optionsSpecify mounting height; 8 8’ or less, 40 9’ to 40’Specify routine setting code (example GENI-04). See ENERGENI brochure and instructions for setting table and options. Not availablewith sensor or SiteSync options.4Specify group and zone at time of order. See www.hubbelllighting.com/sitesync for further details. Order at least one SiteSync interfaceAccessory SWUSB or SWTAB. Each option contains SiteSync License, GUI, and Bridge Node5Only available with 1A, 2, 3, 4, 4W and 5R distributions6Order at least one SCP-REMOTE per project location to program and control7This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate spec available specs/specs files/Viper Small LED turtle spec sheet.pdfcontrol (120-277 volts only)WSP/ F1,2 WASP Occupancy Sensor w/ daylightcontrol(347 or 480 volts only)GENI-XX3 ENERGENISWP1,4 SiteSync Pre-CommissionSWPM1,2,4 SiteSync Pre-Comm w/ SensorAccessories and Services (Ordered Separately)Catalog NumberDescriptionSCP-REMOTERemote control for SCP/ F option. Order at least one perproject to program and control.SWUSB*SiteSync loaded on USB flash drive (Windows based only)SWTAB*SiteSync Windows TabletSWBRGSiteSync Wireless Bridge Node Examples: V/A/DBT/SWPM-40F/OPTIONSF FusingBSP Bird SpikesDark Bronze TexturedType 4(Replace XXX with notation for desired finish color)(Refer to page 5 for shield 6COLOR120-277V120V208V240V277V347V480VType 3HOUSE SIDE SHIELD XVOLTAGEUNV120208240277347480* When ordering with SiteSync, one of the interface options must be chosen and orderedseparately. Each option contains the SiteSync License, GUI and Bridge Node. If needed, an additional Bridge Node can be ordered.123SiteSync Lighting Control is available fromour most popular brands in a broad range ofaward-winning product families.Web: www.securitylighting.com2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642Copyright 2016 Security Lighting, a division of Hubbell Lighting, Inc.All Rights Reserved. Specifications subject to change without notice. Printed in U.S.A. SL0001 08/17LEFT ROTATED OPTICRIGHT ROTATED OPTIC

VIPER S SERIESdesign . per formance . technologySECURITYLIGHTING PERFORMANCE DATASmall Viper Luminaire5K(5000K nominal, 70 CRI)# LED’SDRIVECURRENT(MILLIAMPS)SYSTEMWATTS24700 mA55W36560 mA65W36700 mA80W48700 mA110W60700 0000000000000000000000000000004K(4000K nominal, 70 CRI)G1122213112222132122231321223523222333242Web: www.securitylighting.com2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642Copyright 2016 Security Lighting, a division of Hubbell Lighting, Inc.All Rights Reserved. Specifications subject to change without notice. Printed in U.S.A. SL0001 K nominal, 70 301350013515137471384113495LPW1 B107 1104 1102 1100 1100 1102 2103 3102 3111 1107 1105 1100 1103 1105 3105 3103 3107 1104 1102 1100 1100 1102 3103 3100 3107 1104 2102 1100 1110 1102 3103 3100 4107 2103 2101 2100 1100 2102 3102 4100 112222131122221321222313212333242

VIPER S SERIESdesign . per formance . technologySECURITYLIGHTING Small Viper LuminairePHOTOMETRICSType FR - Front Row/Auto OpticType 5RType 5QMType 5WType 4WType 4Type 3Type 2Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-use environment and application.1ELECTRICAL DATAPROJECTED LUMEN MAINTENANCE# OF LEDSNUMBEROFDRIVERS242361481601DRILL PATTERNDRIVECURRENT INPUT VOLTAGE SYSTEM POWER(mA)(V)(w)120277700 mA55347480120277560 mA65347480120277700 mA80347480120277700 mA110347480120277700 160.70.30.20.20.90.40.30.21.10.50.40.3Compatible with Pole drill pattern B44” Suggesteddistance from topof poleAMBIENTTEMP.25 C / 77 CEPAØ5/8”2X Ø5/16”Config.12 @ 90 Ø4” PoleØ5” PoleØ6” PoleTENON TOP POLE BRACKET ACCESSORIES (Order Separately)(2 3/8” OD tenon)Catalog Projected per IESNA TM-21-11Data references the extrapolated performance projections for the base model in a 25 C ambient, based on10,000 hours of LED testing per IESNA LM-80-08.2.50”RectangularArmTM-21-11Calculated L7060,000100,000(HOURS)0.950.92 377,00010 25,0001.00 0.97DescriptionSquare tenon adapter (4 at 90 degrees)Round tenon adapter (4 at 90 degrees)Hexagonal tenon adapter (3 at 120 degrees)1 Replace XX with color choice, eg.: DB for Dark Bronze2 Only for use with AD mounting option3 Only for use with AD3 mounting optionWeb: www.securitylighting.com2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642Copyright 2016 Security Lighting, a division of Hubbell Lighting, Inc.All Rights Reserved. Specifications subject to change without notice. Printed in U.S.A. SL0001 08/17EPA.67Config.EPA3 @ 120 1.681.063 @ 90 1.732 @ 180 1.344 @ 90 2.12