Transcription
The MAS-100 FamilyLeading solutions for air monitoring
Improve your viable air samplingwith the MAS-100 The most complete and accurateline of microbial air monitoringsystems available!How theSample collection heipha ICR* andMAS-100 works accuracyICRplus Settle PlatesAll MAS-100 Microbial Air Monitoring Systems are sieve impaction systems based on the Anderson impaction principle, accepted and provenworldwide. Air is aspirated through aperforated lid. A radial fan, controlledby a flow sensor, accurately regulatesair flow real time at 100 litres/min.The air is impacted onto the surfaceof growth media in a 90 – 100 mmPetri dish or 55 – 60 mm ContactPlate. MAS-100 Microbial AirSamplers comply with the guidelinesas specified in new ISO 14698part1 and part 2.2The MAS-100 Microbial AirMonitoring Systems provide themost accurate sample collectionavailable. The MAS-100 systems(except the MAS-100 Eco ) utilize astate-of-the-art mass flow sensorto ensure a constant air flow rateof 100 litres/min. The mass flowsensor continuously regulates the airflow rate during sample collection.This allows the MAS-100 toautomatically adjust for differencesin fill volume of Petri dishes, changesin air density and differencesbetween individual perforated lids.The heipha ICR Settle Plates areproduced under aseptic conditions,gamma-irradiated and triple-bagged,making them optimal for passive airsampling in isolators and cleanrooms.Furthermore, they are also suitablefor personnel monitoring, as wellas active air monitoring withMAS-100 microbial Air Samplers.* Isolators and Clean Rooms
Table of Contents04 The MAS-100 Iso NT 06 The MAS-100 Iso MH 08 The MAS-100 VF 10 The MAS-100 NT 11 The MAS-100 NT Ex12 The MAS-100 Eco 13 The MAS-100 CG Ex 14 The DA-100 NT 15 Services & Support16 ICR & ICRplus Settle Plates18 Ordering Information3
The MAS -100 Iso NT The MAS -100 Iso NT For Isolators4The MAS-100 Iso NT is specifically designed for usein aseptic production and sterility testing isolators.The MAS -100 Iso NT is now a family of systems whichincludes an, IP54 and IP66 versions for increasedflexibility. The MAS -100 Iso NT is produced by GAMP4 specifications and is compliant with guidelinesas specified in ISO 14698 part1 and part 2.The MAS -100 Iso NT uses an innovative doublevalve system which enables the sampling headsand unit to be integrated into the decontaminationprocess of the isolator or cleanroom. The valvesystem allows the vaporized hydrogen peroxide(VHP), to run through the sampling head and internalflow path without damage to the instrument.
The new MAS -100 Iso NT shares the same samplingaccuracy and features of the regular MAS -100 Iso NT .For further information about our workshops and onsiteservices please have a look at page 15.The MAS -100 Iso NT The system operates with an integrated mass flowsensor and uses 90 – 100 mm Petri dishes. Thesampling head mounts inside the isolator with theinstrument portion on the outside. The MAS -100Iso NT utilizes a flexible communications packageincluding Ethernet, Profibus and 9 digital inputs/outputs.The MAS -100 Iso NT allows for remote activationvia a computer or the PLS controlled on the isolator.Technical specifications for MAS-100 Iso NT FeatureSpecificationNominal AirflowDimensionsWeightPowerPower Input100 litres/min. 2.5 %(L/W/H) 16 x 29 x 23 cm7.5 kg without sampling head110 – 240 Volt, 1.5 A, 50 – 60 HzDC 24 V/3.25 A/65 W MaxMax CurrentDisplayPreset Sampling VolumesUser Definable Sampling VolumesMaterial (Side Panels)AnemometerHot-wire anemometerGuidelinesCE ApprovalSampling HeadWeightMaterialConnectorDiameterHeightMaterial (Side Panels)Valves RigidNew ISO 146982.5 ABacklit liquid crystal display100, 250, 500, 750, 1,000 litres1 to 2,000 litresAnodized aluminumHot-wire anemometer, numeric controlAlphanumeric liquid crystal display, 2 x 8 charactersRTC (Real Time Clock) battery;good for approx. 10 years73/23/EEC, 89/336/EEC,DIN EN 61326-1:1997,DIN EN 61010-1:2001, GAMP 4.0:2001EN 61000-4-2; EN 61000-4-4;EN 61000-4-5; EN 61000-4-11;EN 61000-4-8; EN 61000-4-6; EN 61000-4-3Specification1.5 kgStainless Steel (316L)3/4” Tri-Clamp10.9 cm9 cmAnodized aluminumPVC/Viton/SSvalidated 98 %5
The MAS-100 Iso MH Innovation pure by Merck MilliporeThe MAS-100 Iso MH The MAS-100 Iso MH is used to control the microbiological contamination of the air in isolators. A uniquesecurity concept permits the installation of the samplingheads for standard 90 – 100 mm Petri dishes at thecritical control points. All electronic and moving parts areoutside the critical zone. The MAS-100 Iso MH has anadditional internal pump with flow control for automaticdisinfection of the sampling head and the aspiration tube.Air exaustDecontaminant exaustup to 1 meter6
The MAS-100 Iso MH An innovative double valve system enables the samplingheads to be integrated into the decontaminationprocess of the isolator. Each unit has an air- and asterilisation pump and works fully autonomous.The MAS-100 Iso MH is built according to GAMP 5 andcorresponds to the ISO 14698 standard. It is a completlyvalidated system designed for the highest demands.Filter (optional use)up to 10 metersTechnical Specifications for Mas-100 Iso MH FeatureSampling headInstrumentAirflowSampling volumeImpaction speedSampling headOperationAutomatic calibration cycleEthernet, USB, RS232 ports, Digital in/outputsAutomatic in-line disinfection cycleSpecificationh x Ø 14 x 5.5 (2.7 kg)l x w x h 38 x 23 x 12 (6.8 kg)100 SLPMselectable from 1 – 2,000 litresapprox. 20 m/secstainless steel and Teflon Direct access or over PC7
The MAS-100 VF The MAS -100 VF The next generation of Air Samplers8The new MAS-100 VF active Air Sampler was especiallydeveloped for controlled environments. Regulatoryexpectations require air monitoring in manufacturingfacilities because microbial contamination mayinfluence quality and reduce shelf life. The MAS-100 VF uses 90 – 100 mm standard Petri dishes, is easy tohandle and compact, while it is ideal for monitoringthe quality of your environment. Its electronicspeed control maintains an accurate flow rate.Like all MAS-100 systems, the MAS-100 VF samplesat a flow rate of 100 litres per minute. The handleenables the sampler to be mounted onto an optionaltripod, thereby allowing testing at different angles forfixed applications. The perforated lid is the sameas on the standard MAS-100 sampler.
The simple user menu is easily accessed and operatedby a single touch slide control. Sampling volumesare programmable from 1 – 1,000 litres, with 5 presetvolumes to assure reproducible results.The MAS -100 VF Technical pth with handleWeightMaterialDiameter of sampling headNominal airflowSampling volume179 mm109 mm148 mm1.75 kg (with sampling head)Anodized aluminum10 cm100 LPM 4 %Preset values: 50, 100, 250, 500 and 1,000 litresEach volume can be preset to a value from 1 to 1,000 litresElectronicFor standard Petri dishes and contact plates1/4” and 3/8” for use with optional tripodRecharchable Li-ion battery pack6VAlphanumeric liquid crystal display, 2 x 8 charactersRTC (real time clock) battery –Lifetime: Approximately 10 yearsTemperature 5 to 40 C, humidity 0 to 80 % RH(non-condensing)MicroprocessorEmission: EN 61326:1997/A1:1998, EN 55022:1998 A1:00Immunity: EN 61326-1:1997/A1:1998,EN 61000-4-2:1995 A1:98 A2:01,EN 61000-4-3:1998 A1:98 A2:01,EN 61000-4-4:1995 A1:01 A2:01,EN 61000-4-5:1995 A1:01,EN 61000-4-6:1996 A1:01,EN 61000-4-8:1993 A1:01,EN 61000-4-11:1994 A1:98 A2:01100 to 240 V AC/47 – 63 Hz5 V DC/2000 mAAirflow regulationPetri dish supportTripod screwRechargeable batteriesMotorDisplayRTC batteryOperating conditionsControl unitCE ApprovalPower Unit/Battery ChargerOutput9
The MAS-100 NT The MAS -100 NT The industry standard for viable air sampling10The MAS-100 NT and MAS-100 NT Ex portable microbial airsamplers are the next generation of the industrystandard for use in critical environments. These compactyet sophisticated devices are the preferred choice forthose demanding the highest quality in microbial airmonitoring. The MAS-100 NT systems feature a new300-hole perforated lid for increased collection efficiencyand impaction speed. Both systems utilize standard90 – 100 mm agar plates or can be adapted to fit55 – 60 mm contact plates allowing for a low consumable cost and greater flexibility. Sampling at 100 litresper minute, these systems have the highest airflow accuracy available at 2.5 %, compared to others that canbe as high as 10 %. The integrated flow sensor allowsthe user to freely interchange the perforated lids withoutaffecting the accuracy or the calibration of the unit.Sampling volumes are also easily configurable between1 and 2,000 litres. The units have a horizontal air flowvelocity of 0.45 meters per second and isokinetic flowrate that will not produce turbulence in a laminar flowenvironment. The new SQS function will allow for smallersampling volumes over longer periods of time, up to 50sequences over 24 hours.The new MAS-100 NT systems are controlled using anew menu driven, larger illuminated display allowing forquicker navigation. A programmable start delay ofup to 60 minutes allows for personnel to be out of thesampling area when the sampling starts and a newaudible alarm indicating the interruption of a sampling
The MAS-100 NT ExExplosion prooffor use in explosion proof areas. The MAS-100 NT Exhas received ATEx Conformity and can be used in zone2 and gas groups 11A,11B and 11C in temperatureclasses T1 to T4.The MAS -100 NT Excycle. The MAS-100 NT is powered by a newLithium ion rechargeable battery with an intelligentcharging program that assures long battery lifewithout routine discharging. When fully charged,the battery pack provides 7 hours of continuousoperation or about 42,000 litres of total volume.The MAS-100 NT Microbial Air Sampler alsofeatures new USB data communication port. Thisallows for easy download of software upgradesand easy communication with database programs.The improved communications provides aninterface to the new DA-100 NT calibrationstandard for fully automated calibration. TheMAS-100 NT and MAS-100 NT Ex are the firstmicrobial air sampling systems with automatedcalibration, assuring absolute accuracy.The MAS-100 NT Ex shares all of the same functionsof the MAS-100 NT system but is specially designedTechnical specifications for MAS-100 NT and MAS-100 NT Diameter of Sampling HeadNominal AirflowStandard Sampling VolumesFreely Definable Sampling VolumesBattery PackCharging timeRunning timeTotal aspiration volumeMotorDisplayLifetime RTC BatteryDriving MotorProcessorAirflow Regulation25 cm11 cm2.38 kgAnodized aluminum10 cm100 litres/min. 2.5 %50, 100, 250, 500, 1,000 litres1 to 2,000 litresLi-Ion, rechargeable battery, 7.4 V/6.9 AhFull recharge time approx. 3.5 hoursTotal running time approx. 7 hoursapprox. 42,000 litres6VAlphanumeric liquid crystal display, 32 charactersRTC (Real Time Clock) battery; good for approx. 10 yearsPWM frequency for driving motorType 80C552Hot-wire anemometer, numerical control, Temperature and PressuresensorsEmission: EN 61326-1:2006, EN 55011:1998 A1:99Immunity: EN 61326-1:2006, EN 61000-4-2:1995 A1:98 A2:01EN 61000-4-3:2002, EN 61000-4-4:1995 A1:01 A2:01EN 61000-4-5:1995 A1:01, EN 61000-4-6:1996 A1:01EN 61000-4-8:1993 A1:0110 – 240 Volt, 50 – 60 KHzUSB InterfaceCE ApprovalPower Unit/Battery ChargerData ExchangeNote: Specifications for the MAS-100 NT Ex are the same as above.11
The MAS -100 Eco The MAS-100 Eco The MAS-100 Eco offers an economical alternative toour highly acclaimed MAS-100 Microbial Air Samplers.This smaller, lightweight unit is ideal for applications inor out of the cleanroom. The MAS-100 Eco offers manyof the same features found on the standard MAS-100 Air Samplers, without the mass flow sensor. Like allMAS-100 systems, the MAS-100 Eco samples at aflow rate of 100 litres per minute and uses standard90 – 100 mm Petri dishes, providing a low operating cost.The handle doubles as a stand to allow different anglesfor testing and an optional tripod adapter attaches tothe handle for fixed applications. The simple user menuis easily accessed and controlled using single touch “yes ”or “no ” responses. Sampling volumes are programmablefrom 1 – 1,000 litres with 5 preset volumes to ensurereproducible results. The unit is pre-calibrated atMerck Millipore but re-calibration on-site is easy withthe addition of our DA-100 Digital Anemometer.Technical specifications for MAS-100 Eco FeatureSpecificationHeight (without handle)DiameterHeight (with handle)WeightMaterialDiameter of Sampling HeadNominal AirflowStandard Sampling VolumesFreely Definable SamplingVolumesRechargeable BatteriesMotorDisplayLifetime RTC BatteryCE Approval14 cm11 cm18 cm1.4 kgAnodized aluminum10 cm100 litres/min. 4.0 %10, 20, 50, 100, 200 & 500 litres0 – 1,000 litresPower Unit/Battery ChargerOutput122 NiMH rechargeable batteries, 1.2 V6VAlphanumeric liquid crystal display, 2 x 8 charactersRTC (Real Time Clock) battery; good for approx. 10 yearsEN 50081-1:1992 EN 50082-1:1997EN 50081-2:1993 EN 50082-2:1995 prEN 50082-2:1996110 – 240 Volt, 50 – 60 KHz5V DC/500 mA
The MAS-100 CG Ex Compressed Gas Microbial Air SamplerThe MAS -100 CG Ex The MAS -100 CG Ex System samples at two constantflow rates, 100 L /min and 50 L/min for low flowapplications. The system will sample gas at a pressurerange between 1.5 bar to 10 bar. Compressed gas isdirected through a perforated plate onto the 90 – 100 mmPetri dish. After sampling of the required volume of gas, agradual decompression occurs automatically, preventingany sudden pressure change, avoiding possible damageto the microorganisms and improving recovery.The MAS -100 CG Ex system is the onlycompressed gas microbial Air Sampler approvedfor use in Zone 2 explosion hazard areas.The unit is pre-programmed for compressed air, nitrogen,carbon dioxide and argon gas, and a total of 10 gasprotocols can be programmed and stored in the unit.The automated collection process savestime and eliminates the awkward and riskymanipulations required with manual methods.Technical specifications for MAS -100 CG Ex FeatureSpecificationHeightLengthWidthWeight (without sampling head)Material boxNominal Flow Rates32.5 cmStandard Sampling VolumesFreely definable sampling volumesPre-programmed gas typesBattery PackBattery ChargerCharger OutputDisplayLifetime RTC BatteryFlow ValveProcessorGas RegulationCE ApprovalEx-Proof37.0 cm11.0 cm10 kgCoated aluminum100 litres/min. 10 % (over the pressure range)1.5 bar to 10 bar (absolute)50 litres/min. 10 % over the pressure range of1.5 bar to10 bar (absolute)50, 100, 250, 500, 1,000 litres1 to 2,000 litres, volumes individually selectable between0 and 2,000 litres. 0 volumes are not displayedAir, nitrogen, carbon dioxide, argon20 cells NiMH, 3,800 mAh, voltage 24 V110 – 240 Volt, 50 – 60 Hz36 V DC, 1.5 AAlphanumeric liquid crystal display, 32 charactersApprox. 10 yearsProportional, 24 VoltType : 80C552Mass flowmeter and pressure sensor 0 – 10 bar andproportional valveEN 61000-6-1;2001, , EN61326-1 A1, 1998SNCH 02 ATEx 3418, EN1127; 1997, EN 50021;1999Technical specifications for Sampling HeadFeatureSpecificationHead without Clamps,HeightDiameterWeightMaterial16.0 cmAutoclavableTubingRapid Connectors10.0 cm1.5 kgAnodized aluminum, clamps ofstainless steel20 minutes at 121 CLength, 1.5 m ID 10 mmOD 19 mm, sterilize for 20 minat 121 CChromium-plated brass13
The DA-100 NT The DA-100 NT Automatic calibration featureThe DA-100 NT Digital Anemometer is a highlyaccurate transfer standard used to calibrate bothMAS -100 and MAS -100 NT instruments (cannotbe used on the MAS -100 CG Ex ). This digital vaneanemometer spins freely on a magnetic field bearingand the revolutions are counted by a laser diode.The flow rate accuracy is 1.0 %, the mostaccurate on the market. The display also showstemperature ( C), velocity in m/sec and barometricpressure in mbar. The DA-100 NT may be usedin manual or automatic calibration modes forcalibration of the MAS -100 NT instruments.The DA-100 NT is calibrated at Merck Milliporelaboratory using a critical venturi flow standard,SWISS traceable. Certification is provided foreach instrument.Technical specifications for DA-100 NT FeatureSpecificationAccuracy at 100 litres/min.HeightDiameterWeightVane BearingMaterialBattery PackDisplayTemperature DisplayResolutionAmbient Conditions 1.0 %CE Tested14* NIST National Institute of Standards and Technology8.5 cm11 cm0.8 kgMagnetic (patent pending)Anodized aluminum9 V BatteryAlphanumeric LCD display, 2 x 8 charactersincrementsTemperaturesensor:Pressure sensor:AccuracyResolution 0.3 C 0.1 CAccuracyResolution 1.5 mbar 0.1 mbarAmbientTemperature 0conditions:to 40 CHumidity:0 to 80 % r.h.IEC 61326-1 :2005, CISPR 11, Class BIEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4IEC 61000-4-5, IEC 61000-4-8, IEC 61000-4-11
Services & SupportValidation/Training SupportMerck Millipore has experienced and trained validationengineers who are skilled to assist in Validation Protocolimplementation within the QC microbiology laboratory, sothe QC/QA departments do not have to allocate resources.A complete and technical training on your Merck MilliporeAir Sampler is also provided during the validation engineer’svisit. Having a Merck Millipore Validation Protocol andon-site service eliminates high costs, both apparent andhidden, and helps ensure the validation is completed quicklyand economically and guarantee optimal performanceover the equipment life time. Contact your local salesrepresentative for the availability of training at your site.Services plans: Preventative &Curative MaintenanceTraceability & Calibration AccuracyMerck Millipore has the most comprehensivepreventative and curative maintenance programavailable for microbial air sampling.The services provided include: Complete yearly visual, functional and performance “as found” and “as left” checks includingcalibration for all MAS-100 systems. Calibration certificate (traceability fromGFW Switzerland) and complete servicereport is provided with every services.In addition to the above services, additional verification,calibration or preventive maintenance (includedverification & calibration) options are available. Weoffer several contract levels to give you the possibilityto enhance the coverage of the equipment e.g. sparepart and repair visit can be included in your contract.Our certified service engineers can service your Air Samplerin our closest repair depot or directly in your lab. Contactyour local sales representative for more information.Services & SupportMerck Millipore aims to provide complete validationdocumentation to help you through the validationprocess. Our validation protocols are based on our internalproduct qualification test methods. These extensiveprotocols will enable the QC/QA Lab to quickly initiateyour validation master plan and perform IQ, OQ andPQ (suitability of the test methodology) with ease.They follow international guidelines such as EP/USP and GMP.To confirm the availability of Validation Support for yourneeds, please contact your local sales representative.The sample collection volume for each MAS-100 system is measured and adjusted with the DA-100NT System, which is directly traceable to standardsfrom GFW Switzerland. Traceability is not a guaranty ofmeasurement accuracy, it is a chain of documentationbetween the last measurements made, linking it tothe referenced standard. The uncertainty (accuracy)of a measurement is determined by the combineduncertainties of all measurements made by devicesbetween the referenced standard and that devise beingcalibrated, this is called the “chain of comparisons”. Witheach link in the chain, additive uncertainty occurs. Tominimize uncertainty and maintain accuracy the numberof links in the chain of comparison must be minimizedand the uncertainty for each link must be documented.This is the highest level of flow accuracy available fromany microbial Air Sampler manufacturer. You can havethe confidence when monitoring critical environmentsthat every sample volume collected is accurate.15
heipha ICR and ICRplus Settle Platesheipha ICR and ICRplus Settle PlatesThe heipha ICR and ICRplus Settle Plates are producedunder aseptic conditions, gamma-irradiated andtriple-bagged, making them optimal for active airmonitoring with MAS-100 Microbial Air Samplers.All of the MAS-100 Air Samplers have been validatedaccording to ISO 14698 using heipha ICR and ICRplusSettle Plates – they all showed the same reliableresults in physical and biological efficiency testing.heipha ICRplus Settle Plates (lockable)20120201202012020heipha ICR Settle Plates (triple-bagged, gamma-irradiated, non-lockable)Package sizeSabouraud Dextrose Agar - ICRSabouraud Dextrose Agar LT - ICR(SDA with lecithin and Polysorbate (Tween ) 80)Sabouraud Dextrose Agar LTHTh - ICR 30ml (SDA withlecithin, Polysorbate (Tween ) 80, histidine and thiosulfate)Sabouraud Dextrose Agar selective LTHTh - ICR(SDA with lecithin, Polysorbate (Tween ) 80, histidine andthiosulfate and irradiation-resistant antibiotics for growthinhibition of accompanying bacterial flora)Tryptic Soy Agar - ICR16Package sizeTSA LTHTh - ICR (Tryptic Soy Agar with neutralizers lecithin,Polysorbate (Tween ) 80, histidine and sodium thiosulfate)TSA LT - ICR (Tryptic Soy Agar with neutralizers lecithin andPolysorbate (Tween ) 80)TSA - ICR (Tryptic Soy Agar)Chocolate Agar LTH - ICR (Chocolate Agar with neutralizerslecithin, Polysorbate (Tween ) 80 and histidine)Tryptic Soy Agar LT - ICR(TSA with lecithin and Polysorbate (Tween ) 80)Tryptic Soy Agar LTHTh - ICR (TSA with lecithin, Polysorbate(Tween ) 80, histidine and thiosulfate)Tryptic Soy Agar LT Cephase - ICR(TSA with lecithin and Polysorbate (Tween ) 80 and specificbeta-lactamase mixture for inactivation of a broad spectrum ofpenicillins, cephalosporins and carbapenems)Tryptic Soy Agar LTHTh Penase - ICR(TSA with lecithin, Polysorbate (Tween ) 80, histidine,thiosulfate and beta-lactamase for inactivation of penicillins)Vegetable Peptone Agar LTHTh - ICR(PSA (caseine peptone replaced by vegetable peptone) withlecithin, Polysorbate (Tween ) 80, histidine and thiosulfate)Ord. 01.46685.00201.46685.01201.46686.0020Ord. 201.46013.0120201.46658.00201.46658.0120
Average % Physical Efficiency11082,5MAS-100 Iso 55MAS-100 NT MAS-100 VF 27,5MAS-100 Iso MH 1 meterMAS-100 Iso MH 9 Meter001,534,5Particle Size (Mass mean diameter, Microns)For use in isolators and cleanrooms One product for all applicationsRoom temperature storage Storage at site of use VHP-impermeable packaging Less cooling capacity neededRecommended Casein Soya Bean DigestAgar (TSA) acc. to USP and FDA Formulations with neutralizers forthe inactivation of disinfectantheipha ICRplus Settle Plates – Secure your samples duringtransport with the innovative two way closure system CLOSED-position for safe transportand aerobic incubation Add-On: Chocolate Agar LTH – ICRplusfor the detection of fastidious bacteria VENT-position for anaerobic/microaerophilic incubation6heipha ICR and ICRplus Settle PlatesMAS-100 Physical EfficiencyClose-up of the new two way closure system17
Ordering Information18MAS-100 NT Air Samplerwith hard carrying case, battery, 300-hole perforated lid, dust cover, mainscharger, USB cable, 3 mm allen key, and operator’s manual on CD1.09191.0001MAS-100 NT Perforated Lid, Aluminum, 300-hole1.09195.0001MAS-100 NT Perforated Lid, Aluminum, 400-hole1.09088.0001MAS-100 NT Perforated Lid, Stainless Steel, 400-hole1.09424.0001MAS-100 NT Dust Cover, Aluminum1.09084.0001MAS-100 NT Li-Ion Battery1.09208.0001MAS-100 NT Mains Charger1.09200.0001MAS-100 NT Ex Air Sampler, Explosion Proofwith hard carrying case, battery, 300-hole perforated lid, dust cover, mainscharger, USB cable, 3 mm allen key, and operator’s manual on CD1.09194.0001MAS-100 NT Ex Perforated Lid, Aluminum, 300-hole1.09195.0001MAS-100 NT Ex Perforated Lid, Aluminum, 400-hole1.09088.0001MAS-100 NT Ex Dust Cover1.09084.0001MAS-100 Eco Air Samplerwith hard carrying case, battery, 400-hole perforated lid, dust cover, mainscharger, 3 mm allen key, and operator’s manual on CD1.09227.0001MAS-100 Eco Perforated Lid, Aluminum, 400-hole1.09088.0001MAS-100 Eco Dust Cover, Aluminum1.09084.0001MAS-100 Eco Mains Charger1.09128.0001MAS-100 Eco Tripod Adapter1.09127.0001MAS-100 Eco Dust Cover1.09084.0001MAS-100 CG Ex Air Samplerwith sampling head (50 L/min), hose, mains charger, operator’s manual on CD1.09327.0001MAS-100 CG Ex Sampling Head1.09237.0001MAS-100 Iso NT MH Control unit, 1 head1.17174.0001MAS-100 Iso NT MH Control unit with Profibus, 1 head1.17177.0001MAS-100 Iso NT MH Control unit with Ethernet, 1 head1.17178.0001MAS-100 Iso NT MH Control unit, 2 heads1.17118.0001MAS-100 Iso NT MH Control unit with Profibus, 2 heads1.17144.0001MAS-100 Iso NT MH Control unit with Ethernet, 2 heads1.17145.0001MAS-100 Iso NT MH Control unit, 3 heads1.17146.0001MAS-100 Iso NT MH Control unit with Profibus, 3 heads1.17147.0001MAS-100 Iso NT MH Control unit with Ethernet, 3 heads1.17148.0001MAS-100 Iso NT MH Control unit, 4 heads1.17149.0001MAS-100 Iso NT MH Control unit with Profibus, 4 heads1.17155.0001MAS-100 Iso NT MH Control unit with Ethernet, 4 heads1.17157.0001MAS-100 Iso NT Isolator System1.09168.0001MAS-100 Iso NT Control unit with Profilbus1.09173.0001MAS-100 Iso NT Control unit with Ethernet1.09174.0001MAS-100 VF 1.17103.0001MAS-100 VF power supply1.17104.0001MAS-100 VF Petri dish clamps, 31.17171.0001Quick Adaptor for Tripod1.09223.0001
AccessoriesMAS-100 Iso NT IP54 Kit1.17159.0001MAS-100 Iso NT Perforated lid, stainless steel, 300-hole edge protected1.09189.0001MAS-100 Iso NT Perforated lid, stainless steel, 400-hole edge protected1.09222.0001MAS-100 Iso NT Base for sampling head, stainless with Tri-Clamp and gasket1.09328.0001MAS-100 Iso NT Easy clean base for sampling head, stainless steel,with 1 Tri-Clamp & 1 gasket1.17091.0001MAS-100 Iso NT Perforated lid, stainless steel, 300-hole1.09329.0001MAS-100 Iso NT Perforated lid, stainless steel, 400-hole1.09424.0001MAS-100 Iso NT Tri-Clamp, stainless steel1.09440.0001MAS-100 Iso NT Dust Cover, stainless steel1.09644.0001MAS-100 Iso NT Remote Control1.17181.0001MAS-100 Iso NT Elbow Joint with 2 Tri-Clamps1.17083.0001MAS-100 Iso NT Power Supply1.17182.0001MAS-100 Iso MH Power Supply1.09784.0001MAS-100 Iso NT Silicone Gasket1.170.840.001MAS-100 Iso NT Pressure Test Kit1.170.850.001MAS-100 Iso NT Silicone gaskets for easy clean base1.170.990.0014" Opticap XL 4KTGRA04TT35" Opticap XL 5KTGRA05TT1M Air T Isolator Tubing 3 mATBTUBE01Flexable tube connectorPF01501Tripod1.09326.0001Tripod adaptor for MAS-100 Eco 1.09127.0001MAS-100 Mains Charger1.09085.0001MAS-100 Tube Adaptor1.09224.0001Contact Plate Adaptor1.09214.0001Perforated Lid for Contact Plates1.09213.0001MAS-100 NiMH Battery Pack (for Version 2.7x or higher)1.09229.0001MAS-100 Power supply1.09085.0001Note: The 300-hole perforated lid is compatible with legacy systems, but a specific calibration is requiredValidation Protocols (A4)MAS-100 VF Verification Report (A4)MAVFA4FT1MAS-100 Iso NT Validation Protocol (A4)MAISA4VP1MAS-100 Iso MH Validation Protocol (A4)MAMHA4VP1MAS-100 NT Validation Protocol (A4)MANTA4VP119
We provide information and advice to our customers on application technologies and regulatory matters to the best of our knowledge and ability, but without obligation or liability. Existing laws and regulations are to be observed in all cases by our customers.This also applies in respect to any rights of third parties. Our information and advice do not relieve our customers of their ownresponsibility for checking the suitability of our products for the envisaged purpose.ReferencesAnderson, A.A. (1958)“New Sampler for the collection, sizing and enumerationof viable airborne particles.”Journal of Bacteriology, Vol 76, pp. 471-484Meier, R., Zingre, H. (2000)“Qualification of Air Sampler systems: The MAS-100 ”Swiss Pharma 22, No. 1-2, pp. 15-21Feller, W.“An Introduction to Probability Theory and itsapplications”, John Wiley and Sons Inc., New York, 1950"Microbial Control and Monitoring of Aseptic Processing Environments"U.S. Pharmocopiea (USP), General Chapters 1116 , 2012Ewald, R., and Meier, R. 2004“Detection of micro-organisms in compressed gases:Validation of MAS-100 CG using compressed gases.”Swiss Pharma, 26(10a): 16-18For more information on our products:www.merckmillipore.com/biomonitoringFind contact information for your country at:www.merckmillipore.com/officesFor Technical Service, please visit:www.merckmillipore.com/techserviceMerck KGaAFrankfurter Straße 25064293 Darmstadt, Germanywww.merckmillipore.com/officesThe M logo is trademark of Merck KGaA, Darmstadt, Germany. MAS-100 is a registered trademarkof MBV, Staefa, Switzerland. All other trademarks are the property of their respective owners.Lit No. PB4667EN00 03/2015 2015 Merck KGaA, Darmstadt, Germany. All rights reserved.
The MAS-100 VF The MAS-100 VF The next generation of Air Samplers Like all MAS-100 systems, the MAS-100 VF samples at a flow rate of 100 litres per minute. The handle enables the sampler to be mounted onto an optional tripod, thereby allowing testing at different angles for fixed applications. The perforated lid is the same
