Transcription
G-SERIESCOMPACT EXCAVATORS17G / 26G / 30GFAB cover/page 1 goes here for gatefold layoutCOMPACTAND VERSATILE
RELIABLE2PRODUCTIVE
MAKE ABIGIMPACTWITH A G-SERIES COMPACT.
INSPIRED BY YOUR INSIGHT.Like you, we’re dedicated to improving everything we do. So when we developed our G-SeriesCompact Excavators, we gathered invaluable insight from owners and operators through ourCustomer Advocate Group. Inspired by your fresh thoughts and ideas, we went to work onmachines that better meet your needs. Including a more spacious cab with a wider entryway anda larger expanse of glass* for unsurpassed visibility. Fuel-saving auto-idle/auto shutdown andpower/economy work modes. Plus the 30G, which rounds out our lineup with more lift capacityand breakout force* — and all the usual G-Series advantages customers have come to expect.All so you can achieve more productivity and uptime, at lower costs.*Compared to previous models.4
A LOT ON YOUR PLATE?DIG IN.With tight lot lines and tighter deadlines, you need to get moreout of your “mini.” G-Series Compacts deliver big productivityand versatility within a small footprint.Save your tailReduced-tail-swing design makesG-Series machines extra-maneuverableand plenty productive in places withtight spaces.Dig and goG-Series Compacts transport easilybetween jobsites, making themperfect for “dig-and-go” jobs.All the comfort you need —and then someWith large entryways and virtuallyunrestricted sightlines, the G-Series’spacious operator stations deliverall the comfort, convenience, andvisibility operators need to bringout their best.EASY TO TRAILERManeuverable muscle17G’s variable-width undercarriageand foldable blade can be hydraulicallyretracted to navigate narrow pathwaysand tight quarters, then easilyrepositioned for solid stability, to workwhere handwork used to be required.
STANDOUT FEATUREUSES COMMONBUCKETS ANDATTACHMENTS6
PUT IT TO WORKOUR 30G DELIVERS.Neither too big nor too small for many of our customers’ needs,the 30G is well armed to handle a wide range of underground,building, landscaping, and site-development tasks. And it’s theperfect addition to most rental fleets.Just rightSame proven featuresFilling the gap between the 26G and35G, the 30G delivers impressivebucket force, arm force, breakoutforce, and lift capacity, to powerthrough tough digging conditions.The 30G boasts the productivefeatures customers have come toexpect of other G-Series machines,including a wear-compensatingquick-coupler, a pattern changer,foldable pedals, and proportionalauxiliary hydraulics plumbed to theend of the boom.Go with the flowMore net horsepower allowsthe 30G to drive a larger hydraulicpump, increasing productive flow.Higher-flow hydraulic pumps powerlarger attachments more efficiently.Maximum utilizationThis capable mini can use many ofthe same buckets and attachmentsthat customers who own otherJohn Deere compact machinesmay already have in their fleets.
MAKEYOURSELFAT HOMESURPRISINGSUURPR INNG COMFORT FOR A MINI.Compact doesn’t have to mean uncomfortable. Our G-Series machines won’t cramp your legs — or yourstyle. Their ergonomically designed operator stations are built to accommodate even larger operators.Comfortable workspaceMore efficient operationChoose how you workThese spacious operator stations havewide entryways, making entranceand exit easier than ever. Optionalcab’s front glass is expansive, forexceptional visibility.Swing boom and foldable travel pedalson the 26G and 30G are positionedto provide efficient operation whilemaximizing foot room.Calm, cool, and collectedTrack speeds automatically slowto low whenever a heavier load isencountered, then return to highwhen the load normalizes. No pedalor operator activation is requiredfor 26G or 30G high-speed travel.Go from backhoe- to excavator-stylecontrols with a twist of your wrist.Control pattern selector valveis conveniently located in acompartment beneath the seatand includes a sight glass thatdisplays the selected pattern.Automatic, high-velocity bi-levelclimate-control system withautomotive-style adjustablelouvers helps keep the glass clearand the operator comfortable.8Automatic travel speeds
4-SEASONCABFOR ALL-WEATHERPRODUCTIVITY
AS TOUGH AS THEY COMEDISH IT OUT — AND TAKE IT.Don’t let their compact statures fool you. Like their larger G-Seriessiblings, the 17G, 26G, and 30G are exceptionally capable and durable.Maintenance-free brakesDurable lines and hosesWet-disc swing brake provideslong-term maintenance-freeperformance.Steel hydraulic lines are clampedsecurely. CORDURA covering onrubber hoses provides extra durability.Minimize leaksHeavy-duty framesO-ring face-seal hydraulic fittingsvirtually eliminate aggravating andcostly leaks.Box-constructed X-frame and trackframes provide a rock-solid andstable platform that resists materialand dirt buildup.Backup planSelf-priming diesel helps you getback up and running quickly shouldyour excavator ever run out of fuel.Protected motors and cylindersHeavy-duty side shields deflectmaterial and impacts, protecting propelmotors and boom and blade cylinders.10No costly aftertreatment devicesHigh-torque fuel-efficient diesels meetEPA Final Tier 4/EU Stage IV emissionstandards without aftertreatmentdevices — reducing maintenanceand expense.NO AFTERTREATMENTDEVICESNEEDED
SET YOUR SIGHTS ONGETTINGMORE DONE.12
WORK YOUR CONNECTIONSTHE RIGHT TOOL FOR THE JOB.Standard equipped with backfill blade, mechanical quick-coupler, and auxiliary hydraulics,plus any of the many optional John Deere attachments available, G-Series CompactExcavators can make a sizable impact on your productivity. And your profitability.Quick-change artistBackfill bladeStandard selector valve on the 26Gand 30G allows the connection oftwo attachments at the same time.Supply/return oil can be divertedfrom one to the other by changingthe valve position.Backfill blade adds versatility,enabling these compact excavatorsto grade and fill. Provides extrastability with attachments or whenworking on uneven terrain, too.AugersOur hydraulic hammers are perfectfor quarry or trench work andconcrete removal. Use them to breakrock, concrete flatwork, and walls;around rebar; or to a precut line.John Deere augers can beequipped with numerous sizesof rock, heavy-duty, standard,and tree/shrub bits.Hydraulic hammersWide variety of buckets andattachmentsWedge-style coupler enables quickchanges and accepts a wide varietyof buckets and attachments, suchas hammers, plate compactors,and augers.Make the most of your investmentAlready own some John Deere attachments? D-SeriesExcavator buckets, hammers, and augers also work onthe 17G, 26G, and 30G, as well as other Deere machines.
DON’T SWEAT THE DETAILSSPEND MORE TIME WORKING, LESS TIME MAINTAINING.14Support where and when you need itEasy cooler core cleanoutCommon componentsParts and service are available at over1,400 John Deere dealers throughoutNorth America.Hinged door provides wide-openaccess to the side-by-side oil coolerand radiator. Cooler design resists trashbuildup and allows easier core cleanout.Access is quick and convenient.The 30G shares many commoncomponents — including the engine,fluids, filters, and operator’s station(cab or canopy) — with the 35G,simplifying maintenance and repairs.
Auto-idle and auto shutdownOptimize power and fuel economyAuto-idle automatically reduces enginespeed when hydraulics aren’t in use.Auto shutdown further conservesprecious fuel.Power/economy modes optimizepower for digging applications andsignificantly improve fuel efficiency.
SPECIFICATIONSEngine17GManufacturer and ModelYanmar 3TNV74FNon-Road Emission StandardEPA Final Tier 4/EU Stage IVDisplacement0.99 L (61 cu. in.)Net Power (ISO 9249)10.8 kW (14.5 hp) at 2,400 rpmPowertrainEach track independently driven by hydrostatic axial-piston motor connected to 2-stage planetary gear reduction boxMaximum Travel SpeedLow2.4 km/h (1.5 mph)High4.2 km/h (2.6 mph)Swing Speed9.4 rpmSwing BrakeSpring applied, hydraulically released, automaticHydraulicsOpen center with 2 variable-displacement pumps, 1 fixed-gear pump, and 1 pilot pumpPump FlowPiston2 x 19.2 L/m (2 x 5.1 gpm)Gear10.98 L/m (2.9 gpm)Auxiliary Flow29.9 L/m (7.9 gpm)ControlsHydraulic pilot operated for boom, arm, bucket, swing, boom swing, blade, travel, and auxiliary functionsElectricalAlternator Rating40 ampWork Lights1 mounted on boomUndercarriagePlanetary final drive; 2-speed axial-piston propel motorsTracks, Rubber230 mm (9 in.)Ground Pressure with Rubber Track26.6 kPa (3.9 psi)UpperstructureIndependent Swing BoomLeft70 deg.Right50 deg.Counterweight, Standard120 kg (265 lb.)Rear Overhang40 mm (2 in.)ServiceabilityRefill CapacitiesFuel Tank20.06 L (5.3 gal.)Cooling System2.7 L (2.9 qt.)Engine Oil with Filter3.10 L (3.3 qt.)Hydraulic Tank14.01 L (3.7 gal.)Operating WeightWith 0.93-m (3 ft. 1 in.) Standard Arm, Standard1720 kg (3,790 lb.)Counterweight, Rubber Track, Full Fuel Tank, and79-kg (175 lb.) OperatorWhile general information, pictures, and descriptions are provided, some illustrations and text may includeproduct options and accessories NOT AVAILABLE in all regions, and in some countries products and accessoriesmay require modifications or additions to ensure compliance with the local regulations of those countries.16
SPECIFICATIONSOperating DimensionsA Maximum Digging ReachB Maximum Digging DepthC Maximum Cutting HeightD Maximum Dumping HeightE Transport HeightF Overall Length (blade in front)G Minimum Swing RadiusH Blade Bottom Highest PositionI Blade Bottom Lowest PositionBoom-Swing Pivot-Offset DistanceOffset DistanceLeftRightDigging ForceBucketArmMachine DimensionsBladeWidthMinimumMaximumHeightJ Upperstructure WidthK Overall HeightL Rear-End Swing RadiusM Minimum Ground ClearanceN Counterweight HeightO Engine Cover HeightP Undercarriage LengthQ Undercarriage WidthMinimumMaximumR Sprocket Center to Idler CenterS Track Shoe Width17G0.93-m (3 ft. 1 in.) Standard Armand Standard Counterweight3.81 m (12 ft. 6 in.)2.19 m (7 ft. 2 in.)3.54 m (11 ft. 7 in.)2.51 m (8 ft. 3 in.)2.38 m (7 ft. 10 in.)3.50 m (11 ft. 6 in.)1.53 m (5 ft. 0 in.)C0.29 m (11 in.)0.23 m (9 in.)D0.11 m (4 in.)GE0.36 m (14 in.)0.56 m (22 in.)16.0 kN (3,597 lb.)8.6 kN (1,933 lb.)FAB0.98 m (3 ft. 3 in.)1.28 m (4 ft. 2 in.)260 mm (10.2 in.)0.99 m (3 ft. 3 in.)2.38 m (7 ft. 10 in.)0.68 m (2 ft. 3 in.)0.165 m (6 in.)0.45 m (18 in.)1.15 m (3 ft. 9 in.)1.57 m (5 ft. 2 in.)LJ0.98 m (3 ft. 3 in.)1.28 m (4 ft. 2 in.)1.21 m (4 ft. 0 in.)0.23 m (9 in.)KOHMSRILift Capacities0.93-m (3 ft. 1 in.) Standard Arm, StandardCounterweight, and Rubber TrackGround Level at 3.0-m (10 ft.) Radius*Blade down (limited by hydraulics).Over Front*471 kg (1,015 lb.)Over Side217 kg (470 lb.)While general information, pictures, and descriptions are provided, some illustrations and text may includeproduct options and accessories NOT AVAILABLE in all regions, and in some countries products and accessoriesmay require modifications or additions to ensure compliance with the local regulations of those countries.PNQ
SPECIFICATIONSEngine26GManufacturer and ModelYanmar 3TNV80FNon-Road Emission StandardEPA Final Tier 4/EU Stage IVDisplacement1.267 L (77 cu. in.)Net Power (ISO 9249)14.9 kW (20.0 hp) at 2,500 rpmPowertrainEach track independently driven by hydrostatic axial-piston motor connected to 2-stage planetary gear reduction boxMaximum Travel SpeedLow2.9 km/h (1.8 mph)High4.5 km/h (2.8 mph)Swing Speed9.1 rpmSwing BrakeSpring applied, hydraulically released, automaticHydraulicsOpen center with 2 variable-displacement pumps, 1 fixed gear pump, and 1 pilot pumpPump FlowPiston2 x 36.0 L/m (2 x 7.9 gpm)Gear16.28 L/m (4.3 gpm)Auxiliary Flow46.18 L/m (12.2 gpm)ControlsHydraulic pilot operated for boom, arm, bucket, swing, boom swing, blade, travel, and auxiliary functionsElectricalAlternator Rating40 ampWork Lights2 halogen, 1 mounted on operator station, and 1 mounted on boomUndercarriage2-speed axial-piston propel motorsTracks, Rubber300 mm (12 in.)Ground Pressure with 1.17-m (3 ft. 10 in.) Standard Arm,Standard Counterweight, and Rubber TrackCanopy25.0 kPa (3.6 psi)Cab25.9 kPa (3.8 psi)UpperstructureIndependent Swing Boom w/ 1.17-m (3 ft. 10 in.) Standard Arm Canopy and 241-kg (531 lb.) Standard Counterweight Cab and 208-kg (459 lb.) Standard CounterweightLeft70 deg.70 deg.Right60 deg.60 deg.ServiceabilityRefill CapacitiesFuel Tank34.07 L (9.0 gal.)Cooling System3.12 L (3.3 qt.)Engine Oil with Filter3.69 L (3.9 qt.)Hydraulic Tank23.85 L (6.3 gal.)Operating WeightsWith 1.17-m (3 ft. 10 in.) Standard Arm, Rubber Track,Standard Counterweight, Full Fuel Tank, and 79-kg(175 lb.) OperatorCanopy2620 kg (5,780 lb.)Cab2770 kg (6,110 lb.)While general information, pictures, and descriptions are provided, some illustrations and text may includeproduct options and accessories NOT AVAILABLE in all regions, and in some countries products and accessoriesmay require modifications or additions to ensure compliance with the local regulations of those countries.18
SPECIFICATIONSOperating Dimensions1.17-m (3 ft. 10 in.) Standard Arm andStandard CounterweightA Maximum Digging ReachB Maximum Digging DepthC Maximum Cutting HeightD Maximum Dumping HeightE Transport HeightF Overall LengthBlade in FrontBlade in RearG Minimum Swing RadiusH Blade Bottom Highest PositionI Blade Bottom Lowest PositionBoom-Swing Pivot-Offset DistanceOffset DistanceLeftRightDigging ForceBucketArmMachine DimensionsBladeWidthHeight1.17-m (3 ft. 10 in.) Standard Arm andStandard CounterweightJ Upperstructure WidthK Overall HeightL Rear-End Swing RadiusM Minimum Ground ClearanceN Counterweight HeightO Engine Cover HeightP Undercarriage LengthQ Undercarriage WidthR Sprocket Center to Idler CenterS Track Shoe Width26GCanopy4.63 m (15 ft. 2 in.)2.59 m (8 ft. 6 in.)4.44 m (14 ft. 7 in.)3.19 m (10 ft. 6 in.)2.43 m (8 ft. 0 in.)Cab4.63 m (15 ft. 2 in.)2.59 m (8 ft. 6 in.)4.28 m (14 ft. 1 in.)3.04 m (10 ft. 0 in.)2.43 m (8 ft. 0 in.)4.18 m (13 ft. 9 in.)4.48 m (14 ft. 8 in.)1.92 m (6 ft. 4 in.)0.32 m (13 in.)0.32 m (12 in.)0.09 m (3 in.)4.18 m (13 ft. 9 in.)4.48 m (14 ft. 8 in.)2.01 m (6 ft. 7 in.)0.32 m (13 in.)0.32 m (12 in.)0.09 m (3 in.)0.56 m (22 in.)0.70 m (28 in.)0.56 m (22 in.)0.70 m (28 in.)22.21 kN (4,994 lb.)15.17 kN (3,410 lb.)22.21 kN (4,994 lb.)15.17 kN (3,410 lb.)GCDEFBA1.50 m (4 ft. 11 in.)320 mm (12.6 in.)Canopy1.39 m (4 ft. 7 in.)2.43 m (8 ft. 0 in.)0.80 m (31 in.)0.30 m (12 in.)0.53 m (21 in.)1.49 m (4 ft. 11 in.)1.96 m (6 ft. 5 in.)1.50 m (4 ft. 11 in.)1.53 m (5 ft. 0 in.)0.30 m (12 in.)Cab1.42 m (4 ft. 8 in.)2.43 m (8 ft. 0 in.)0.80 m (31 in.)0.30 m (12 in.)0.53 m (21 in.)1.47 m (4 ft. 10 in.)1.96 m (6 ft. 5 in.)1.50 m (4 ft. 11 in.)1.53 m (5 ft. 0 in.)0.30 m (12 in.)LJKOHMILift Capacities1.17-m (3 ft. 10 in.) Standard Arm, StandardCounterweight, and Rubber TrackGround Level at 3.0-m (10 ft.) Radius*Blade down (limited by hydraulics).Canopy, Over Front*1200 kg (2,573 lb.)Canopy, Over Side362 kg (781 lb.)While general information, pictures, and descriptions are provided, some illustrations and text may includeproduct options and accessories NOT AVAILABLE in all regions, and in some countries products and accessoriesmay require modifications or additions to ensure compliance with the local regulations of those countries.RCab, Over Front*1201 kg (2,592 lb.)PNSCab, Over Side394 kg (850 lb.)Q
SPECIFICATIONSEngine30GManufacturer and ModelYanmar 3TNV88F-EPHBNon-Road Emission StandardEPA Final Tier 4/EU Stage IVDisplacement1.642 L (100.2 cu. in.)Net Rated Power (ISO 9249)17.4 kW (23 hp) at 2,400 rpmPowertrain2-speed propel with automatic shiftMaximum Travel SpeedLow2.8 km/h (1.7 mph)High4.3 km/h (2.7 mph)Swing Speed, Right and Left9.1 rpmSwing BrakeSpring applied, hydraulically released, automatic, disc typeHydraulicsOpen center, pilot operated, with 2 variable-displacement pumps and single-gear pilot pumpMaximum Rated FlowMain Pumps2 x 38.4 L/m (2 x 10.1 gpm)Pilot Pump22.8 L/m (6.0 gpm)Auxiliary Hydraulics61.2 L/m (16.2 gpm)ControlsPilot levers; short-stroke, low-effort hydraulic pilot controls with shutoff leverElectricalAlternator Rating55 ampWork Lights2 halogen, 1 mounted on operator station, and 1 mounted on boomUndercarriagePlanetary final drives with axial-piston motors; propel motor shieldsTrack-Shoe Width, Standard Configuration300 mm (11.8 in.)Ground Pressure with 300-mm (12 in.) TripleSemi-Grouser ShoesCanopy28 kPa (4.1 psi)Cab30 kPa (4.4 psi)UpperstructureMaximum Boom-Swing AngleCanopyCabLeft72 deg.62 deg.Right62 deg.62 deg.ServiceabilityRefill CapacitiesFuel Tank42.0 L (11.1 gal.)Engine Coolant5.0 L (1.3 gal.)Engine Oil with Filter7.2 L (1.9 gal.)Travel Gearcase (each; qty. 2)0.60 L (0.6 qt.)Hydraulic System56.0 L (14.8 gal.)Hydraulic Tank43.0 L (11.4 gal.)Operating WeightsWith 328-kg (723 lb.) Counterweight, Standard FrontAttachments, Full Fuel Tank, and 75-kg (165 lb.) Operator300-mm (12 in.) Rubber Track (canopy with operator)3105 kg (6,850 lb.)300-mm (12 in.) Rubber Track (cab with operator)3275 kg (7,220 lb.)While general information, pictures, and descriptions are provided, some illustrations and text may includeproduct options and accessories NOT AVAILABLE in all regions, and in some countries products and accessoriesmay require modifications or additions to ensure compliance with the local regulations of those countries.20
SPECIFICATIONSOperating Dimensions1.17-m (3 ft. 10 in.) Standard Arm andStandard CounterweightA Maximum Cutting HeightB Maximum Dumping HeightC Maximum Digging DepthD Maximum Digging ReachE Minimum Boom-Swing RadiusF Transport LengthMachine DimensionsBladeWidthHeightG Upperstructure WidthH Overall Height, Canopy or CabI Track WidthJ Undercarriage WidthK Ground ClearanceL Tail-Swing Radius (with standardarm)M Engine Cover HeightN Maximum Blade Lift Above GroundO Maximum Blade Drop Below GroundP Sprocket Center to Idler CenterQ Undercarriage LengthR Counterweight Clearance30GCanopy4.62 m (15 ft. 2 in.)3.20 m (10 ft. 6 in.)2.79 m (9 ft. 2 in.)4.89 m (16 ft. 1 in.)1.58 m (5 ft. 2 in.)4.45 m (14 ft. 7 in.)Cab4.42 m (14 ft. 6 in.)3.03 m (9 ft. 11 in.)2.79 m (9 ft. 2 in.)4.89 m (16 ft. 1 in.)1.82 m (6 ft. 0 in.)4.45 m (14 ft. 7 in.)EA1740 mm (5 ft. 9 in.)373 mm (15 in.)1.55 m (5 ft. 1 in.)2.48 m (8 ft. 2 in.)300 mm (12 in.)1.55 m (5 ft. 1 in.)280 mm (11 in.)775 mm (31 in.)BFD1.53 m (5 ft. 0 in.)360 mm (14 in.)360 mm (14 in.)1.66 m (5 ft. 5 in.)2.11 m (6 ft. 11 in.)0.55 m (22 in.)CGLHRNMKPOQIJLift CapacitiesBoldface type indicates hydraulically limited capacities; lightface type indicates stability-limited capacities, in kg (lb.). All lift capacities are based on ISO 10567(with power boost). Machine situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87% ofhydraulic capacity or 75% of weight needed to tip machine.1.17-m (3 ft. 10 in.) Arm, 81.5-kg (180 lb.)Bucket, 328-kg (723 lb.) Counterweight, Canopy, Blade on Ground,Canopy, Blade on Ground,Cab, Blade on Ground,Cab, Blade on Ground,and 300-mm (12 in.) Track ShoeOver Front*Over SideOver Front*Over SideGround Level at 3.0-m (10 ft.) Radius1440 kg (3,170 lb.)480 kg (1,050 lb.)1440 kg (3,170 lb.)510 kg (1,124 lb.)*Blade down (limited by hydraulics).While general information, pictures, and descriptions are provided, some illustrations and text may includeproduct options and accessories NOT AVAILABLE in all regions, and in some countries products and accessoriesmay require modifications or additions to ensure compliance with the local regulations of those countries.
Additional equipmentKey: l Standard s Optional or special17G 26G 30G Enginel l l Meets EPA Final Tier 4/EU StageIV emissionsl l l Engine coolant to –37 deg. C(–34 deg. F)l l l Engine preheaterl l l Fan guardl l l Fuel/water separatorl l l Full-flow oil filterl l l Isolation mountedl l l Key start switch with electric fuelshutoffl l l Single dry-type air filterl lUnder-hood mufflerl Auto-idlel Auto shutdownHydraulic SystemlAuxiliary function foot controll l Auxiliary function right-handpilot-lever controll l l Auxiliary hydraulic lines to endof booms Auxiliary hydraulic lines withquick-couplers to end of booml l Auxiliary selector valvel l l Axial-piston swing motorl l l Boom-swing foot controll l l Excavator-to-backhoe controlpattern change valvel l l Open center with 2 variabledisplacement pumps, 1 fixed-gearpump, and 1 pilot pumpl lHydraulic pilot-operated controlsfor boom, arm, bucket, swing, boomswing, blade, and travell Hydraulic pilot-operated controlsfor boom, arm, bucket, swing, boomswing, blade, travel, and auxiliaryfunctionsl l l Wet-disc swing brakeUndercarriagelHydraulic-adjustable variable widthl l l Planetary final drivel l l Propel motor shield17G 26G 30G Undercarriage (continued)l l l 2-speed axial-piston propel motorslRubber track, 230 mm (9 in.)l l Rubber track, 300 mm (12 in.)Upperstructurel l l 360-deg. rotationlCounterweight, 120 kg (265 lb.)lCounterweight, cab, 208 kg (459 lb.)lCounterweight, canopy, 241 kg (531 lb.)l Counterweight, 328 kg (723 lb.)l l l Hinged service-access doorsl l l ROPS/TOPS/FOPS (canopy)sROPS/TOPS/FOPS (cab) with heaters ROPS/TOPS/FOPS (cab) with airconditioning and heaterl lVandal protection for service doorsand fuel capl Vandal protection for service doors,fuel cap, and toolboxl l l Reduced-tail-swing configurationFront AttachmentslArm, 0.93 m (3 ft. 1 in.)l l Arm, 1.17 m (3 ft. 10 in.)lBackfill blade, 0.98 m (3 ft. 3 in.)minimum to 1.28 m (4 ft. 2 in.)maximumlBackfill blade, 1.50 m (4 ft. 11 in.)l Backfill blade, 1.74 m (5 ft. 9 in.)lBoom, 1.82 m (6 ft. 0 in.)lBoom, 2.10 m (6 ft. 11 in.)l Boom, 2.465 m (8 ft. 1 in.)l l l Mechanical quick-couplersAugers: Chain drive / Bits /Bit adapterss s Augers: Planetary / Chain drive /Bits / Bit adapterss s s Clamps s s Hammers: Points / Toolss s s Quick-coupler buckets: Bucket teeth /Ditching / Heavy-dutyOperator’s Stationl l l Hornl l l Hour meterSee your John Deere dealer for further information.17G 26G 30G Operator’s Station (continued)l l l Instrumentation lightsl l Mode selectors (illuminated):Power mode (1) / Eco mode (1)l lMonitor system: Preheat indicator /Engine oil pressure warning light /Alternator charge warning light /Fuel gauge and low-fuel-levelindicator / Engine coolant warninglight and alarm / Hour meter /Work lights indicatorl Monitor system: Preheat indicator /Engine oil pressure indicator withalarm / Alternator voltage indicator /Fuel gauge and low-fuel-levelindicator / Engine coolant temperaturegauge and engine coolant temperatureindicator with alarm / Hour meter /Work lights indicatorl l l Motion alarm with cancel switchl l l Work lights switchlPropel leversl l Propel levers and foldable pedalsl2 travel speedsl l 2 travel speeds with automaticshiftingl l l Seat belt, 51 mm (2 in.), retractables Seat belt, 76 mm (3 in.), retractablel l l Suspension seat, vinyl, with fore/aft adjustments Suspension seat, cloth (cab only)s s s Front screenElectricall l l 12-volt accessory outletl lAlternator, 40 ampl Alternator, 55 ampl l l Low-maintenance batteryl l l Blade-type multi-fused circuitsl l l Positive-terminal battery coversLightslWork lights: 1 mounted on booml l Work lights: Halogen / 1 mountedon operator’s station / 1 mountedon boomWhile general information, pictures, and descriptions are provided, some illustrations and text may include product optionsand accessories NOT AVAILABLE in all regions, and in some countries products and accessories may require modificationsor additions to ensure compliance with the local regulations of those countries.Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan at test conditions per ISO 9249. These machinesare not equipped with spark-arrestor mufflers. Usage in forestry applications is not recommended. Specifications and design subject to change without notice.Wherever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on canopy unitswith standard arms; full fuel tanks; and 79-kg (175 lb.) operators; a 17G unit with 406-mm (16 in.) bucket, 230-mm (9 in.) rubber track, and 120-kg (265 lb.)counterweight; a 26G unit with 457-mm (18 in.) bucket, 300-mm (12 in.) rubber track, and 208-kg (459 lb.) cab counterweight or 241-kg (531 lb.) canopycounterweight; and a 30G unit with 300-mm (12 in.) rubber track and 328-kg (723 lb.) counterweight.DKAGZTSCCE Litho in U.S.A. (21-03)JohnDeere.com
North America. Easy cooler core cleanout Hinged door provides wide-open access to the side-by-side oil cooler and radiator. Cooler design resists trash buildup and allows easier core cleanout. Access is quick and convenient. Common components The 30G shares many common components — including the engine, luids, ilters, and operator's station
