Transcription
Veterinary Product CatalogIn the USA, this product has labeling limitations. See package insert for complete information.USA Law restricts these devices to sale by or on the order of a physician.Not all products are currently available in all markets.www.synthesvet.com DePuy Synthes Vet, a division of DOI 2016. All rights reserved.DSUS/VET/1016/0072 12/16 DV2017DePuy Synthes Vet1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 710-6599To order: (800) 523-0322Implants Instruments SetsLimited Warranty and Disclaimer: DePuy Synthes Vet products are sold with a limited warranty to the original purchaseragainst defects in workmanship and materials.Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.Veterinary Product CatalogImplantsInstrumentsSets
Historical BackgroundBefore 1937, the treatment of fractures in large and small animals was confined mainly to casts and splints.Between this period and the mid-1960s, fixation by Stader and Kirschner-Ehmer splints, bone sutures, and theoccasional Sherman or Lane bone plate was added to the veterinary armamentarium. The functional and anatomicalresults were less than desirable in many cases, and nonunion, malunion, and stiff joints were not uncommon.This mirrored the state of the art of internal fixation of fractures in man at the time.Fracture treatment, however, took a tremendous leap forward in 1958 when the Swiss Association for the Study ofInternal Fixation (in German: Arbeitsgemeinschaft für Osteosynthesefragen—AO) defined the biomechanical principlesfor successful internal fixation of fractures, and implemented these principles with the creation of an entire system ofstainless steel implants and instruments. Their applied fracture research was carried out in the Laboratory forExperimental Surgery in Davos, Switzerland, based on metallurgical expertise gleaned from the watch-making industryand expert European toolmakers.Documentation in Bern of more than 100,000 clinical cases using these AO methods, and based on a comprehensiveclassification of fractures, confirmed the reliability and quality of the system. The central theme was the rapid return offunction after fracture treatment. This was accomplished by anatomical reduction, stable internal fixation with implantsutilizing interfragmentary compression, buttressing, medullary splintage, and preservation or enhancement of the bloodsupply in the fracture zone by early exercise and early bone grafting. There was usually no necessity for casts orexternal splintage. Emphasis was also placed on preoperative planning, operative asepsis, gentle soft tissue handlingand atraumatic exposure of the fractured bone, and early postoperative mobilization of the part and the patient.Protected weight-bearing and careful radiographic monitoring until union was achieved completed the regime.The bridge between human and veterinary fracture treatment, and indeed orthopaedics, began to be built early in the1940s by Kuntscher with the experimental work on intramedullary nailing in dogs. Dr. Jacques Jenny, as a resident inZurich in 1943, assisted Dr. H. Knoll and Dr. H. Willenegger with the first clinical canine femoral intramedullary nailing.In 1965, Drs. J. Jenny and R.B. Hohn, encouraged by Dr. Howard Rosen, introduced AO techniques in large and smallanimal orthopaedic surgery at the University of Pennsylvania and the Animal Medical Center in New York, respectively,utilizing human AO principles and instrumentation.Following participation in 1969 at a human AO course in Davos, a number of active American and Swiss veterinarysurgeons initiated courses for veterinarians at Bettlach, Waldenburg and Davos in Switzerland, and at the Ohio StateUniversity in Columbus, Ohio, in the United States. Veterinary AO sections were started in these two countries with thespecial help of Fritz Straumann, and were united with groups from other countries as an international organization in1970. Basic and Advanced courses have been held regularly in Switzerland, the United States, and other countries.Research led to the design of new implants which would conform to the anatomical and functional requirements ofanimals, and to the definition of techniques specific for the various animal species. The original AO principles haveproven to be as successful in large and small animals as in humans. This has been clearly demonstrated by analysisof the documentation of the treatment and follow-up of thousands of animal fractures.chronOS, DCP, Fastight, LC-DCP, LCP, and Synthes are trademarks of Synthes, Inc. or its affiliates. 2008 Synthes, Inc. or its affiliates. All rights reserved. Printed in U.S.A.No extracts or copies of this catalog may be made without the written permission of Synthes, Inc. All Synthes VET catalogs and pricelists remain the property of Synthes and may only be used in connection with the instruments and implants distributed by Synthes.
Terms and ConditionsORDERING INFORMATIONOnline Orders: https://ca.jjcustomerconnect.comGlobal Healthcare Exchange (GHX)Electronic Data Interchange (EDI)Telephone Orders, call DePuy Synthes Companies Customer Service English & French toll-free: 1-844-243-4321Fax Orders: 1-905 946-9430 or 1-800-591-4935 (toll free)DePuy Synthes Canada 200 Whitehall DrMarkham ON L3R0T5https://www.jnjmedicaldevices.com/en-CAFOB shipping point: Markham , ONPAYMENTFor Purchasers with pre-approved Company Credit, terms of payment are Net 30 days from the date of invoice, unless otherwiseagreed upon by the Company in writing. Invoices are payable in full and no deductions or set-offs are permitted without firstobtaining prior written authorization from Company. For all other Purchasers, payment is due upon receipt of invoice.RETURN INSTRUCTIONSRETURNED GOODSWhile it is the policy of the Company to fully cooperate with any Purchaser who needs to return Product, some general rules must beset. No credit exists until a Company Credit Note is issued. No deduction, offset, or adjustment to any invoice may be made by thePurchaser except on the basis of a Company Credit Note.RETURN CONDITIONS1.Products must meet all Eligibility Requirements to be considered for return7.8.Purchaser will receive a Company Credit Note for Products consideredeligible for Return by Company.Company Credit Note may be applied towards future orders. Purchase pricewill not be refunded.Purchaser must obtain a “returned goods authorization (RGA) number” fromCompany prior to returning Product for return consideration*. Productsreturned without a RGA number will not be considered Eligible for Return.Unless return was requested by Company, a restocking fee of 15% of theReturned Goods value will be applied to all Eligible Returns.Unless return was requested by Company, Purchaser must pay return freight.Any Products received by Company that do not meet the Return Conditionswill not be eligible for return and will not be returned to the Purchaser.9.Company is not responsible for Products lost or damaged in transit.2.3.4.5.6.Instruments and implants approved by the AO Foundation
Terms and Conditions— continuedDEPUY SYNTHES COMPANIES PURCHASE TERMS & CONDITIONSIn the sole discretion of the Company, a Product is “Eligible for Return”, if it: has been issued a RGA number; was purchased directly from Company by Purchaser in accordance with these Terms; is in saleable condition; (To be considered “in Saleable Condition” the Product must not (A) be damaged bywater, fire, smoke or power failure, (B) have been subjected to extremes in temperature or exposure,(C) have been improperly stored or handled, and/or (D) improperly packaged or returned using impropershipping materials during return);; is in its original packaging, and has not been repacked, over-labeled, price-stickered or reconstituted ortampered with in any way; in its minimum selling unit of measure; not a sample or clinical evaluation package; has a minimum of six (6) months remaining prior to its expiry; is currently offered for sale by Company and not a Product that has been discontinued or consideredobsolete by Company; and, is not a custom or specially made Product. Title to returned Product will transfer to the Company upon receipt at the Company’s distribution centre.To obtain a return authorization:1.2.3.Fax: 1-905 946-9430 or 1-800-591-4935 (toll free)Telephone* English/French: 1-844-243-4321Online portal: https://ca.jjcustomerconnect.comFor further information on our Terms and Conditions, please refer tohttps://www.jnjmedicaldevices.com/en-CA
CONTENTSInstrument andImplant Sets1–1 thru 1–34Implants2–1 thru 2–39Instruments3–1 thru 3–47Casesand Trays4–1 thru 4–16ReferenceMaterials5–1Biomaterial Products6–1 thru 6–2Alphabetical IndexA–1 thru A–2
i
iiCanine Growth Plate Fusion ChartVARIATION IN AGES OF GROWTH PLATE FUSION—DOGForelimbScapular tuberosityProximal humerusDistal humerusProximal ulnaProximal radiusDistal radiusDistal ulnaAccessory carpalMetacarpalProximal phalanxMiddle phalanxSumner-Smith, 1964Illustrations not actual sizeHindlimbEarliestFusedLatestUnfused12 w10 m5m5m5m6m6m10 w5m16 w16 w5m10 m8m8m8m9m8m5m7m5m5mGreat trochanterProximal femurLesser trochanterDistal femurProximal tibiaProximal fibulaDistal tibiaDistal fibulaTuber calcisMetatarsalProximal phalanxMiddle 1 w5m16 w16 w9m9m10 m8m11 m10 m8m8m7m7m7m5m
VS102VS1011.5VS105–1.5Instruments and implants approved by the AO FoundationDrive Type311.19311.21 (long)2 .01.52 .0VS202VS2012 .01.82.4VS203––2.7311.32311.33 (long)3. 52.53. 5VS302VS3013. 52.5 mm Hex311. 26311.28 (long)2.72 .02.7VS205VS20 4Cor tex2.41.5 mmT42.0 mm2.4 mmCruciform 4UBS%SJWF Cruciform Cruciform311.15––1.5TapCatalog Number1.11.1Drill Bit forThreaded Hole1.51.5Drill Bit forGliding HoleDRILL BIT and TAP DIAMETER (mm)Vet Par t NumberSelf-tappingNon-self-tappingScrew TypeThread DiameterSCREW DIAMETER (mm)311.555.54 .05.5–VS5015.53.5 mm Hex311.4 6311.4 84.53. 24.5VS 402VS 4014.5Standard Screws, Drill Bits and Taps for Veterinary Use–2.5 mm Hex311.344 .0311.666.53. 24.5VS60216 mmthread6.532 mmthreadVS603Illustrations not actual size3.5 mm HexVS601FullthreadCancellousVS 40 4Pa r t ia lthread2.5VS 403Fullthread4 .0iiiIllustrations not actual size
Illustrations not actual sizeVS20 61.5T4 Star%rive DePuy Synthes Vet, a division of DOI 2016. All rights reserved.DSUS/VET/0416/0061 04/16www.synthesvet.comDePuy Synthes Vet1302 Wrights Lane EastWest Chester, PA 19380Telephone:e(610) 719-5000To order: (800) 523-0322T6 Star%rive1.1Drill Bit forThreaded HoleDrive Type1.51.52 .0VS2072 .0Drill Bit forGliding HoleDRILL BIT and TAP DIAMETER (mm)Vet Par t NumberSelf-tappingScrew TypeThread DiameterSCREW DIAMETER (mm)1.82.4VS2082.4T8 Star%rive2 .02.7VS20 6L o c k in g H ea d2.7Locking Screws and Drill Bits for Veterinary UseT15 Star%rive2.83. 5VS3033. 53. 24.5VS 40 64 .0Illustrations not actual sizeT25 Star%rive4.35.5VS5025.0iv
Instruments and implants approved by the AO FoundationDrive TypeDrill Bit for Threaded HoleVet P/NThread DiameterScrew TypeVST2012.0 Coarse xDRILL BIT DIAMETER (mm)VST2012.0SCREW DIAMETER (mm)PLUSDRIVE1.5VST2032.4 4LockingScrew and Drill Information for Self Tapping, Titanium Screws for Veterinary UseCruciform2.4VST3113.0vi
1-1The AO set system permits a reasonable number of basic instruments to be used for many applications and the ability to combinethese standard devices with additionally available instruments and implants for special cases and applications.Standard Instrument SetsThese sets contain basic instruments and implants which permit the treatment of most fractures. Their use is described in the latesteditions of the AO Principles of Fracture Management in the Dog and Cat and the AO Principles of Equine Osteosynthesis. If thetechniques described in these manuals are properly followed, the chances for successful fixation are greatly improved. It isimportant that the standard instrument sets should always be complete so that during an operation an important instrument orimplant is not missing. While the number of screws or plates in the implant sets can be reduced or adapted to the usage of theclinic, it is not advisable to delete certain lengths or certain types of plates.Note: Because of the continuing development of the AO Instrumentation by the AO Technical Commission, it is possible thatshape, form and dimension of the instruments and implants or the contents of certain standard sets are changed fromtime to time. Always refer to the latest edition of your DePuy Synthes Vet catalog for details.1.5 mm LCP Instrument and Implant Sets .1-2Mini Fragment Instrument and Implant Sets .1-3Small Fragment Instrument and Implant Sets .1-9TPLO Plate Set .1-18TTA Set .1-19Locking Reconstruction Instrument and Implant Set.1-20CRIF Instrument and Implant Sets .1-21Large Fragment Instrument and Implant Sets.1-23Screw Removal Set .1-33Illustrations not actual sizeInstrument andImplant SetsAO Set System
1-2Instrument andImplant Sets1.5 mm LCP Instrument and Implant 007310.141310.971311.03319.11Instruments1.5 mm LCP Module Case1.1 mm LCP Threaded Drill Guide, 2 ea.StarDrive Screwdriver Shaft, T4, 42 mm, Self-retainingThreaded Bending Pin for 1.5 mm LCP Plates, 2 ea.1.1 mm Drill Bit, Mini Quick Coupling, 75 mm, 2 ea.1.5 mm Drill Bit, Mini Quick Coupling, 65 mm, 2 ea.Countersink for 1.3 mm and 1.5 mm ScrewsHandle with Mini Quick CouplingDepth Gauge for 1.5 mm and 2.0 mm Cortex Screws02.214.10602.214.124Implants1.5 mm Cortex Screws, self-tapping6 ea: 6, 7, 8, 9, 10, 11, 12, 13, 14, and 15 mm; 4 ea: 16, 18, 20, 22, 24 mm02.214.00602.214.0241.5 mm Locking Screws, T4, self-tapping6 ea: 6, 7, 8, 9, 10, 11, 12, 13, 14, and 15 mm; 4 ea: 16, 18, 20, 22, 24 141.5 mm LCP Plate, 4 Holes, 2 ea.1.5 mm LCP Plate, 6 Holes, 2 ea.1.5 mm LCP Adaption Plate, 6 holes, 2 ea.1.5 mm LCP Adaption Plate, 12 holes, 2 ea.1.5 mm LCP T-Plate, 3 head holes, 8 shaft holes, 2 ea.1.5 mm LCP T-Plate, 4 head holes, 8 shaft holes, 2 ea.1.5 mm LCP Extended H-Plate, left, 2 ea.1.5 mm LCP Extended H-Plate, right, 2 ea.1.5 mm LCP Y-Plate, 3 head holes, 8 shaft holes, 2 ea.1.5 mm LCP Condylar Plate, 6 shaft holes, 2 ea.Illustrations not actual sizeInstruments and implants approved by the AO Foundation
1-3Instrument andImplant SetsMini Fragment Instrument Set103.521 Mini Fragment Instrument Set(includes standard set 103.522 and locking set 103.523)690.521Mini Fragment Instrument Graphic CaseInstruments (in set 103.522)1.1 mm Drill Bit, quick coupling, 60 mm, 2 ea.1.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.310.5101.8 mm Drill Bit, quick coupling, 100 mm, 2 ea.310.5302.4 mm Drill Bit, quick coupling, 100 mm,2 ea.Countersink, for 1.5 mm and 2.0 mm Cortex310.88Screws310.972Countersink for 2.0 mm and 2.4 mm screwsHandle, with mini quick coupling311.011.5 mm/1.1 mm Double Drill Guide312.142.4 mm/1.8 mm Drill Sleeve312.1812.4 mm Screwdriver, with Holding Sleeve313.94314.67.97 Cruciform Screwdriver Shaft, with Holding 921329.922Instruments (in set 103.523)1.5 mm LCP Solid Threaded Drill Guide,for 2.0 mm LCP Plates, 2 ea.1.8 mm LCP Solid Threaded Drill Guide,for 2.4 mm LCP Plates, 2 ea.Handle, with quick couplingStarDrive Screwdriver Shaft, T6StarDrive Screwdriver Shaft, T8, 105 mmThreaded Bending Pin, for 2.0 mm LCP Plates,2 ea.Bending Pin, for 2.4 mm Locking Plates, 2 ea.Depth Gauge, for 1.5 mm and 2.0 mm CortexScrewsScrew Forceps2.0 mm Universal Drill Guide2.4 mm Universal Drill GuideBending Iron, for 1.5 mm and 2.0 mm plates,2 ea.Illustrations not actual sizeInstruments and implants approved by the AO Foundation
1-4Mini Fragment Standard Instrument Set690.521Mini Fragment Instrument Graphic 01323.202329.01Instruments1.1 mm Drill Bit, quick coupling, 60 mm, 2 ea.1.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.1.8 mm Drill Bit, quick coupling, 100 mm, 2 ea.2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.Countersink, for 1.5 mm and 2.0 mm Cortex ScrewsCountersink for 2.0 mm and 2.4 mm screws Handle,with mini quick coupling1.5 mm/1.1 mm Double Drill Guide2.4 mm/1.8 mm Drill Sleeve2.4 mm Screwdriver, with Holding SleeveCruciform Screwdriver Shaft, with Holding SleeveDepth Gauge, for 1.5 mm and 2.0 mm Cortex ScrewsScrew Forceps2.0 mm Universal Drill Guide2.4 mm Universal Drill GuideBending Iron, for 1.5 mm and 2.0 mm plates, 2 ea.Illustrations not actual sizeInstrument andImplant Sets103.522 Mini Fragment Standard Instrument Set
1-5Instrument andImplant SetsMini Fragment Locking Instrument Set103.523 Mini Fragment Locking Instrument 329.922Instruments1.5 mm LCP Solid Threaded Drill Guide, for 2.0 mm LCP Plates, 2 ea.1.8 mm LCP Solid Threaded Drill Guide, for 2.4 mm LCP Plates, 2 ea.Handle, with quick couplingStarDrive Screwdriver Shaft, T6StarDrive Screwdriver Shaft, T8, 105 mmThreaded Bending Pin, for 2.0 mm LCP Plates, 2 ea.Bending Pin, for 2.4 mm Locking Plates, 2 ea.Note:Instruments fit in Mini Fragment Instrument Graphic Case (690.521)Illustrations not actual sizeInstruments and implants approved by the AO Foundation
1-6Mini Fragment Implant SetLids not shown690.522690.523690.524Mini Fragment Implant Set Graphic CaseMini Fragment Standard Implant Module (in set 103.527)Mini Fragment Locking Implant Module (in set 103.528)200.806–200.812Implants (in set 103.527)1.5 mm Cortex Screws, self-tapping3 ea: 6, 7, 8, 9, 10, 11 and 12 mm201.806–201.8202.0 mm Cortex Screws, self-tapping3 ea: 6, 8, 10, 12, 14, 16, 18 and 20 mm201.638–201.6582.4 mm Cortex Screws, self-tapping3 ea: 8, 10, 12, 14, 16, 18, 20, 22,24, 26 and 28 mmVP3011.05VP3011.07VP3012.092.0 mm/1.5 mm LC-DCP Plate, 5 holes, 31mm2.0 mm/1.5 mm LC-DCP Plate, 7 holes, 43 mm2.0 mm/1.5 mm LC-DCP Plate, 9 holes, 55 mmVP3021.05VP3021.07VP3022.092.4 mm/2.0 mm LC-DCP Plate, 7 holes, 57 mm2.4 mm/2.0 mm LC-DCP Plate, 9 holes, 53 mm2.4 mm/2.0 mm LC-DCP Plate, 5 holes, 41 mmIllustrations not actual size201.876–201.890212.808212.820Implants (in set 103.528)2.0 mm Locking Screws2 ea: 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18and 20 mm2.4 mm Locking Screws2 ea: 8, 9, 10, 11, 12, 13,14, 16, 18 and 20 mmVP4011.05VP4011.07VP4012.092.0 mm/1.5 mm LCP Plate, 5 holes, 34mm2.0 mm/1.5 mm LCP Plate, 7 holes, 48 mm2.0 mm/1.5 mm LCP Plate, 9 holes, 62 mmVP4021.05VP4021.07VP4022.092.4 mm LCP Plate, 5 holes, 40 mm 2.4 mmLCP Plate, 7 holes, 56 mm 2.4 mm LCP Plate,9 holes, 72 mmInstrument andImplant Sets103.524 Mini Fragment Implant Set(includes standard set 103.527 and locking set 103.528)
1-7Instrument andImplant SetsMini Fragment Standard Implant Set103.527 Mini Fragment Standard Implant SetLid not shown690.523Mini Fragment Standard Implant Module*200.806200.812Implants1.5 mm Cortex Screws, self-tapping3 ea: 6, 7, 8, 9, 10, 11 and 12 mm201.806201.8202.0 mm Cortex Screws, self-tapping3 ea: 6, 8, 10, 12, 14, 16, 18 and 20 mm201.636201.6582.4 mm Cortex Screws, self-tapping3 ea: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 and 28 mmVP3011.05VP3011.07VP3012.092.0 mm/1.5 mm LC-DCP Plate, 5 holes, 31 mm2.0 mm/1.5 mm LC-DCP Plate, 7 holes, 43 mm2.0 mm/1.5 mm LC-DCP Plate, 9 holes, 55 mmVP3021.05VP3021.07VP3022.092.4 mm/2.0 mm LC-DCP Plate, 5 holes, 41 mm2.4 mm/2.0 mm LC-DCP Plate, 7 holes, 57 mm2.4 mm/2.0 mm LC-DCP Plate, 9 holes, 53 mm*Includes five Holding Clips (319.44) for securing platesIllustrations not actual sizeInstruments and implants approved by the AO Foundation
1-8Mini Fragment Locking Implant SetInstrument andImplant Sets103.528 Mini Fragment Locking Implant SetLid not shown690.524Mini Fragment Locking Implant Module*201.876201.890Implants2.0 mm Locking Screws2 ea: 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18 and 20 mm212.808212.8202.4 mm Locking Screws2 ea: 8, 9, 10, 11, 12, 13, 14, 16, 18 and 20 mmVP4011.05VP4011.07VP4012.092.0 mm/1.5 mm LCP Plate, 5 holes, 34 mm 2.0mm/1.5 mm LCP Plate, 7 holes, 48 mm 2.0mm/1.5 mm LCP Plate, 9 holes, 62 mmVP4021.05VP4021.07VP4022.092.4 mm LCP Plate, 5 holes, 40 mm2.4 mm LCP Plate, 7 holes, 56 mm2.4 mm LCP Plate, 9 holes, 72 mm*Includes five Holding Clips (319.44) for securing platesIllustrations not actual size
1-9Instrument andImplant SetsSmall Fragment Instrument Set103.503 Small Fragment Instrument Set(includes standard set 103.501 and locking set ll Fragment Instrument Set Graphic CaseInstruments (in set 103.501)1.25 mm Kirchner Wire, 150 mm (10/pkg.)2.0 mm Kirschner Wire, 150 mm (10/pkg.)2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea.2.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.Countersink, for 3.5 mm cortex and4.0 mm cancellous bone screwsTap for 2.7 mm cortex screwsTap for 3.5 mm cortex screwsTap for 4.0 mm cancellous screwsHandle, with quick couplingT-Handle, with quick coupling2.0 mm Parallel Drill Guide3.5 mm/2.5 mm InsertSmall Hexagonal Screwdriver, withholding sleeveSmall Hexagonal Screwdriver ShaftDepth GaugeScrew Forceps2.7 mm Universal Drill Guide3.5 mm Universal Drill GuideBending Iron, for 2.7 mm and 3.5 mm platesBending Iron, for 2.7 mm and 3.5 mm .467314.468323.023324.023324.024Instruments (in set 103.502)1.6 mm Kirschner Wire with Thread, 150mm (10/pkg)2.8 mm Drill Bit, quick coupling, 165 mm, 2 ea.2.8 mm Threaded Drill Guide, 2 ea.2.0 mm Threaded Drill Guide, 2 ea.StarDrive Screwdriver, T15 StarDriveScrewdriver Shaft, T15 StarDriveScrewdriver Shaft, T8 Holding Sleevefor 314.4671.6 mm Wire SleeveThreaded Plate HolderPush-Pull Reduction DeviceAlso available: Torque Limiting Attachments 511.773 and 511.776 (shown, but not included in set)Illustrations not actual sizeInstruments and implants approved by the AO Foundation
1-10Small Fragment Standard Instrument SetInstrument andImplant Sets103.501 Small Fragment Standard Instrument SetLid not shown690.591Small Fragment Instrument Set Graphic Case292.12292.201.25 mm Kirchner Wire, 150 mm (10/pkg.)2.0 mm Kirschner Wire, 150 mm 19.97323.26323.36329.04329.052.0 mm Drill Bit, quick coupling, 125 mm, 2 ea.2.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.Countersink, for 3.5 mm cortex and 4.0 mm cancellous bone screwsTap for 2.7 mm cortex screwsTap for 3.5 mm cortex screwsTap for 4.0 mm cancellous screwsHandle, with quick couplingT-Handle, with quick coupling2.0 mm Parallel Drill Guide3.5 mm/2.5 mm InsertSmall Hexagonal Screwdriver, with holding sleeveSmall Hexagonal Screwdriver ShaftDepth GaugeScrew Forceps2.7 mm Universal Drill Guide3.5 mm Universal Drill GuideBending Iron, for 2.7 mm and 3.5 mm platesBending Iron, for 2.7 mm and 3.5 mm platesAlso available: Small Fragment Instrument Set with Jacobs Chuck (103.501JC): substitutes Jacobs chuckdrill bits (310.20, 310.24, 310.27 and 310.36) in the standard contents above.Illustrations not actual size
1-11Instrument andImplant SetsSmall Fragment Locking Instrument Set103.502 Small Fragment Locking Instrument 7314.468323.023324.023324.0241.6 mm Kirschner Wire with Thread, 150 mm (10/pkg.)2.8 mm Drill Bit, quick coupling, 165 mm, 2 ea.2.8 mm Threaded Drill Guide, 2 ea.2.0 mm Threaded Drill Guide, 2 ea.StarDrive Screwdriver, T15 StarDriveScrewdriver Shaft, T15 StarDriveScrewdriver Shaft, T8 Holding Sleevefor 314.4671.6 mm Wire SleeveThreaded Plate HolderPush-Pull Reduction DeviceAlso available: Torque Limiting Attachments 511.773 and 511.776Note: Instruments fit in Small Fragment Instrument Set Graphic Case (690.591)Illustrations not actual sizeInstruments and implants approved by the AO Foundation
1-12Small Fragment DCP Plate SetInstrument andImplant Sets103.513 Small Fragment DCP Plate SetLid not shown690.511Small Fragment Plate Set Graphic Case*VP2030.05–VP2030.09Implants2.7 mm DCP Plates1 ea: 5, 7 and 9 holesVP2040.05–VP2040.093.5 mm DCP Plates1 ea: 5, 7 and 9 holesVP2050.07–VP2050.113.5 mm Broad DCP Plates1 ea: 7, 9 and 11 holes*Holds two each of most commonly used 2.7 mm, 3.5 mm and 3.5 mm broad platesIllustrations not actual size
1-13Instrument andImplant SetsSmall Fragment LC-DCP Plate Set103.514 Small Fragment LC-DCP Plate SetLid not shown690.511Small Fragment Plate Set Graphic Case*ImplantsVP3031.05–VP3031.092.7 mm LC-DCP Plates1 ea: 5, 7 and 9 holesVP3041.05–VP3041.093.5 mm LC-DCP Plates1 ea: 5, 7 and 9 holesVP3051.07–VP3051.113.5 mm Broad LC-DCP Plates1 ea: 7, 9 and 11 holes*Holds two each of most commonly used 2.7 mm, 3.5 mm and 3.5 mm broad platesIllustrations not actual sizeInstruments and implants approved by the AO Foundation
1-14Small Fragment LCP Plate SetInstrument andImplant Sets103.516 Small Fragment LCP Plate SetLid not shown690.511Small Fragment Plate Set Graphic Case*VP4031.05–VP4031.09Implants2.7 mm LCP Plates1 ea: 5, 7 and 9 holesVP4041.05–VP4041.093.5 mm LCP Plates1 ea: 5, 7 and 9 holesVP4045.07–VP4045.113.5 mm Broad LCP Plates1 ea: 7, 9 and 11 holes*Holds two each of most commonly used 2.7 mm, 3.5 mm and 3.5 mm broad platesIllustrations not actual size
1-15Instrument andImplant SetsSmall Fragment Screw Set103.515 Small Fragment Screw Set(includes standard set 103.518 and locking set 103.517)2.7 mm Locking Screwsand lid not .121202.806–202.820Small Fragment Screw Set Graphic CaseSmall Fragment Locking Screw Rack (for 2.7 mm and 3.5 mm screws), in set 103.517Small Fragment Standard Screw Rack (for 2.7 mm, 3.5 mm and 4.0 mm screws), in set 103.518Implants (in set 103.517)2.7 mm Locking Screws, self-tapping, with StarDrive recess2 ea.: 18, 20, 22, 24, 26, and 28 mm3.5 mm Locking Screws, self-tapping, with StarDrive recess1 ea.: 20 and 50 mm2 ea.: 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 and 45 mmImplants (in set 103.518)2.7 mm Cortex Screws, self-tapping6 ea.: 6, 8, 10, 12, 14,16, 18 and 20 mm02.200.012-02.200.0303.5 mm Cortex Screws, self-tapping6 ea.: 12, 14, 16, 18, 20, 22, 24, 26, 28 and 30 mm206.016VS403.0304.0 mm Cancellous Bone Screws, fully threaded1 ea.: 16, 18, 20, 22, 24, 26, 28 and 30 mmAlso available: Small Fragment Screw Sets 103.517 and 103.518Illustrations not actual sizeInstruments and implants approved by the AO Foundation
1-16Small Fragment Locking Screw SetInstrument andImplant Sets103.517 Small Fragment Locking Screw Set2.7 mm Locking Screwsand lid not shown690.592202.218202.228212.106212.121Small Fragment Locking Screw Rack (for 2.7 mm and 3.5 mm screws)Implants2.7 mm Locking Screws, self-tapping, with StarDrive recess2 ea.: 18, 20, 22, 24, 26, and 28 mm3.5 mm Locking Screws, self-tapping, with StarDrive recess1 ea.: 20 and 50 mm2 ea.: 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 and 45 mmAlso available: Small Fragment Screw Sets 103.515 and 103.518For additional length screws, see pages 2–4 and 2–6.Illustrations not actual size
1-17Instrument andImplant SetsSmall Fragment Standard Screw Set103.518 Small Fragment Standard Screw SetLid not shown690.593202.808202.820Small Fragment Standard Screw Rack (for 2.7 mm, 3.5 mm and 4.0 mm screws)Implants2.7 mm Cortex Screws, self-tapping6 ea.: 8, 10, 12, 14,16, 18 and 20 mm02.200.012-02.200.0303.5 mm Cortex Screws, self-tapping6 ea.: 12, 14, 16, 18, 20, 22, 24, 26, 28 and 30 mm206.016206.0304.0 mm Cancellous Bone Screws, fully threaded1 ea.: 16, 18, 20, 22, 24, 26, 28 and 30 mmAlso available: Small Fragment Screw Sets 103.515 and 103.517For additional length screws, see pages 2–3 to 2–6.Illustrations not actual sizeInstruments and implants approved by the AO Foundation
1-18Tibial Plateau Leveling Osteotomy Plate Set690.590Tibial Plateau Leveling Osteotomy (TPLO) Plate Set Graphic CaseVP4405.L3VP4405.R32.0 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)3 holesleft3 holesrightVP4404.L3VP4404.R32.4 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)3 holesleft3 holesrightVP4400.L3VP4400.R32.7 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)3 holesleft3 holesrightVP4403.L3VP4403.R33.5 mm Small Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)3 holesleft3 holesrightVP4401.L3VP4401.R33.5 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)3 holesleft3 holesrightVP4402.L4VP4402.R43.5 mm Broad Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)4 holesleft4 holesrightIllustrations not actual sizeInstrument andImplant Sets103.512 Tibial Plateau Leveling Osteotomy Plate Set
1-19Instrument andImplant SetsTibial Tuberosity Advancement SetLid not shownVQ5001.06VQ5001.09VQ5001.12VQ5001.15Osteotomy Spreaders6 mm Blade9 mm Blade12 mm Blade15 mm Blade311.44T-Handle, QCVP5031.L4VP5031.R4VP503
special help of Fritz Straumann, and were united with groups from other countries as an international organization in 1970. Basic and Advanced courses have been held regularly in Switzerland, the United States, and other countries. . Implant Sets Instruments Cases and Trays Reference Materials CONTENTS 3-1 thru 3-47 5-1 Biomaterial .
