HP ProLiant BL465c Gen8 Server Blade - Hewlett Packard Enterprise Community

Transcription

QuickSpecsHP ProLiant BL465c Gen8 Server BladeOverviewHP ProLiant BL465c Gen8 Server Blade1. HP Smart Array P220i Controller with 512MB FBWC2. Two (2) small form factor (SFF) hot plug drive bays3.4.5.6.Internal USB connectorInternal MicroSD card slotTPM connectorTwo (2) mezzanine I/O expansion slots7. FlexibleLOM connector8. Up to two (2) Multi-Core AMD Opteron 6300 Seriesprocessors9. System power button and LED10. Local I/O connector11. Sixteen (16) DDR3 DIMM memory slots (8 per processor)12. Access panelc04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 1

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard FeaturesNOTE: This document covers the HP ProLiant BL465c Gen8 server blade only. For information on HP BladeSystems c-ClassEnclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:HP BladeSystem c-Class Enclosures QuickSpecs: HP BladeSystem c3000 Enclosure QuickSpecs 790 na/12790 na.htmlNOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades aresupported in the new enclosures and any future server blades will be supported in the existing enclosures.HP BladeSystem c7000 Enclosure QuickSpecs 810 na/12810 na.htmlNOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades aresupported in the new enclosures and any future server blades will be supported in the existing enclosures.HP BladeSystem c-Class Interconnect and Mezzanine Components .htmlNOTE: For proper BladeSystem operation, the minimum required versions of HP Onboard Administrator and HP Virtual Connectare required and available via the HP Service Pack for ProLiant, please see: http://www.hp.com/go/spp/download.NOTE: For optimal cooling and system performance the BL465c Gen8 requires the c7000 enclosure to be configured with 10 fansand the c3000 enclosure to be configured with 6 fans.NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - FactoryIntegrated Models" section.ProcessorSixteen-Core ProcessorsOne of the followingAMD Opteron 6380 ( 2.5GHz/ 16-core/16MB/115W) Processordepending on ModelAMD Opteron 6378 (2.4GHz 16-core/16MB/115W) ProcessorAMD Opteron 6376 (2.3GHz 16-core/16MB/115W) ProcessorLow Power AMD Opteron 6366HE (1.8GHz/16-core/16MB/85W) ProcessorTwelve-Core ProcessorsAMD Opteron 6348 (2.8GHz/12-core/16MB/115W) ProcessorAMD Opteron 6344 (2.6GHz/ 12-core/ 16MB/115W) ProcessorAMD Opteron 6238 (2.6GHz/12-core/16MB/115W) ProcessorAMD Opteron 6234 (2.4GHz/12-core/16MB/115W) ProcessorEight-Core ProcessorsAMD Opteron 6328 (3.2GHz/8-core/16MB/115W) ProcessorAMD Opteron 6320 (2.8GHz/8-core/16MB/115W) ProcessorQuad-Core ProcessorsAMD Opteron 6308 (3.5GHz/4-core/16MB/115W) ProcessorNOTE: Processor wattage references reflect Thermal Design Power (TDP). For more information onTDP and Average CPU Power (ACP) visit: http://www.amd.com/acp.Cache Memory16MB Level 3 cache memoryChipsetAMD SR5690 and SP5100NOTE: For more information regarding AMD chipsets, please see the psets.aspx.c04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 2

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard FeaturesUpgradeabilityUpgradeable to two (2) processorsOn SystemManagement ChipsetHP iLO (Firmware: HP iLO 4)NOTE: For more information, visit: http://www.hp.com/go/iloMemory ProtectionAdvanced ECCOnline spare modeMemoryTypeNetwork ControllerOne (1) FlexibleLOM connector for one dual-port FlexibleLOMNOTE: FlexibleLOM options include 10Gb FlexFabric, 20Gb FlexFabric, 10Gb Flex-10, and 10GbEthernet.NOTE: FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Learn moreat: : The server supports one FlexibleLOMs.NOTE: For Pre-configured Model configurations, FlexibleLOM is already included.NOTE: All FlexibleLOMs are dual port: one port is routed to interconnect module bay 1 and the other tobay 2.NOTE: FlexibleLOMs are not compatible with prior generation c-Class server bladesStandard iLO Network Controller:One (1) 10/100 Mbps port for the HP iLO 4 On System Management ChipsetOne (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator(with 10/100/1000 Mbps) to BladeSystem link is 1Gbps.Expansion SlotsTwo (2) I/O expansion mezzanine slots:HP SmartMemoryDDR3 Load Reduced (LRDIMM) or Registered (RDIMM)Standard (Pre-configured 16GB (2 x 8 GB) DDR3 1333MHz RDIMMs at 1.35vModels)Maximum (LRDIMM)512GB (16 x 32GB) at 1333MHzMaximum (RDIMM)256GB (16 x 16GB) up to 1600MHzNOTE: HP memory from previous generation servers are not qualified or warranted with this server. HPSmartMemory is required to realize the memory performance improvements and enhancedfunctionality listed in this document for Gen8. For additional information, please see the HPSmartMemory QuickSpecs 4225 na/14225 na.html.NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within aserver. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.NOTE: Depending on the memory configuration and processor model, the memory speed may run at1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online MemoryConfiguration Tool at: www.hp.com/go/ddr3memory-configurator. x8 PCIe 2.0 Type A (supports Type A mezzanine cards) (expansion slot 1).NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed tointerconnect module bay 3 and the other to bay 4.x16 PCIe 2.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-portcards, one port is routed to interconnect module bay 5 and the other to bay 6. For quad-portcards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one tobay 8.c04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 3

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard FeaturesMezzanine card options include: HP Server ROMDual-port 10Gb FlexFabric, 20Gb FlexFabric,10Gb Flex-10, 10Gb Ethernet options, and quadport 1Gb Ethernet server adapter mezzanine options for additional network portsDual-port 8Gb and 16Gb Fibre Channel HBA for SAN connectivityQDR and FDR InfiniBand for low latency and high bandwidth server interconnectivityI/O accelerator mezzanine options for high transaction rate local storageSmart Array SAS RAID controller mezzanine options for external direct attach and shared SASstorageHP ROM (read only memory) is now digitally signed using HP's Corporate Signing Service. Thissignature is verified before the flash process starts, reducing accidental programming and preventingmalicious efforts to corrupt system ROM.HP ROM provides for essential initialization and validation of hardware components before control ispassed to the customer-installed operating system. The ROM also provides the capability of bootingfrom various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to theoperating system.HP ROM performs very early configuration of the video controller, to allow monitoring of initializationprogress via an attached monitor. If configuration or hardware errors are discovered during this earlyphase of hardware initialization, suitable messages are now displayed on the connected monitor.Additionally, these configuration or hardware errors are logged to the Integrated Management Log(IML) to assist in diagnosis.HP's ProLiant ROM is used to configure the following: Processor and chipset status registersSystem memory, memory map, and memory initializationSystem hardware configuration (integrated PCI devices and optional PCIe cards).Customer-specific BIOS configuration using the HP ROM-Based Setup Utility (RBSU).NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:www.hp.com/support/rbsuStorage ControllerAll ModelsMaximum InternalStorageHot Plug SFF SAS2.4TB2 x 1.2TBHot Plug SFF SATA2.0TB2 x 1.0TBHot Plug SFF SAS SSD3.2TB2 x 1.6GBHot Plug SFF SATA SSD3.2TB2 x 1.6GBNOTE: The ProLiant BL465c Gen8 server includes the new HP small form factor (SFF) hot plugSmartDrive carrier for enhanced management and reduced maintenance errors. HP drives fromprevious generation servers are not compatible with the ProLiant BL465c Gen8 drive bays.One (1) HP Smart Array P220i Controller with 512MB FBWC, (RAID 0 and 1)NOTE: Upgradeable firmware with recovery ROM.NOTE: The HP Smart Array P220i supports two (2) small form factor (SFF)hot plug drive bays.NOTE: The HP Smart Array P220i supports 6G SAS and 3G SATA datatransfer rates.Available Options: Smart Array Advanced Pack Software for enhancedperformance, reliability, availability, and security of system datac04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 4

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard FeaturesNOTE: The mixing of standard SAS drives with SAS SSD drives is supported within the server, but limitsthe RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported.InterfacesMicro SDHC SlotOne (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slotUSB 2.0 PortOne (1) internal USB 2.0 connector for USB flash media drive keysNOTE: The above options are for integrated hypervisor virtualization environments needing a low costboot solution with the highest performance and reliability.Industry StandardComplianceACPI 2.0Microsoft Logo certificationsUSB 2.0 SupportIPMI 2.0Secure Digital 2.0TPM 1.2 SupportIEEE (specific IEEE standards dependant on Ethernet adapter card(s) installed)Advanced Encryption Standard (AES)Triple Data Encryption Standard (3DES)SNMPPCIe 2.0Operating Systemsand VirtualizationSoftware Support forProLiant ServersMicrosoft Windows ServerRed Hat Enterprise Linux (RHEL)SUSE Linux Enterprise Server (SLES)Canonical UbuntuOracle SolarisVMwareCitrix XenServerNOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and VirtualizationSoftware and latest listing of software drivers available for your server, please visit our Support Matrixat: http://www.hp.com/go/ossupport and our driver download HP offers two different c-Class server blade enclosures to meet your individual needs: The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiantBL465c Gen8 servers plugged vertically.The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiantBL465c Gen8 servers plugged horizontally.Server blades, storage blades, interconnect modules, power supplies, fans, and redundantOnboard Administrator modules are all designed to fit into the c3000 and c7000 enclosures.NOTE: For additional enclosure information, please ated Matrox G200 video standard 1280 x 1024 (32 bpp)1920 x 1200 (16 bpp)HP iLO 4 On System Management Memory 16 MB Flashc04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 5

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard Features 256 MB DDR 3 with ECC (112 MB after ECC and video)Form FactorHP ProLiant BL465c Gen8 is a half-height server blade that plugs into the HP BladeSystem c3000 andc7000 enclosures.On SystemManagementHP iLO ManagementEngineHP iLO Management Engine is a comprehensive set of embeddedmanagement features supporting the complete lifecycle of the server, frominitial deployment, through ongoing management, to service alerting andremote support. HP iLO Management Engine comes standard on all HPProLiant Gen8 servers. The HP iLO Management Engine portfolio includes: HP iLO: Provides remote embedded server management withoutOS-based management softwareHP Agentless Management: Provides remote embedded servermanagement without OS-based management softwareHP Active Health System: Builds diagnostic support into theserver.HP Intelligent Provisioning: Lets customers provision andconfigure a single server without any separate media. No moreSmartStart CDs or Smart Update Firmware DVD are needed.o To start Intelligent Provisioning: Press the F10 key during the ProLiant Gen8server boot process (also known as power on selftest or POST). Please go to the Intelligent Provisioning websiteat www.hp.com/go/intelligentprovisioning foradditional information and to view usage videos. Use the Service Pack for ProLiant (SPP) atwww.hp.com/go/spp to get firmware andsoftware updates. HP iLO Mobile App: Enables the ability to access,deploy, and manage your server anytime fromanywhere from select smartphones and mobiledevices. For additional information please visit:www.hp.com/go/ilo/mobileappNOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLOManagement Engine technologies whitepaperHP Insightmanagement softwareHP Service Pack forProLiantHP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)provide a comprehensive approach to firmware and system softwaremaintenance. Together they provide better operating stability and ensuremaximum uptime. The SPP will be updated at a predictable cadence,typically coinciding with new HP server hardware launches. By enablingfirmware to be updated online and integrating firmware and systemsoftware updates in one operation, HP SUM and the SPP offer fasterupdates of individual servers and dramatically faster updates of entireBladeSystem enclosures. Further improving system uptime and stability isthe fact that HP provides 12 months of support for each Service Pack forProLiant release.The user experience around HP SUM and the SPP has been improved inseveral ways, starting with the web download. A single web page providesc04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 6

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard Featuresaccess to a single download containing both the latest version of HP SUMand the latest SPP. Optional smaller subsets with only specific types ofservers or specific operating systems are offered to save on downloadtime. The HP SUM application provides a straightforward, intuitive userinterface that guides the user through the steps of discovery, analyses andupdate, providing comprehensive information on available updates,criticality and interdependencies. This information is also available inreports. By providing the option of multiple local or shared repositorieswhich can be easily updated from hp.com, HP SUM provides the tools tooptimize stability and consistency throughout the company. While HP SUMand the SPP recommend the combinations of firmware and systemsoftware that HP has found to be the best practice, the application givescustomers the flexibility to set their own specific baseline.The Service Pack for ProLiant has been rigorously tested with specificattention for interaction between firmware, drivers and agents both withinthe server as well as in interaction with the BladeSystem enclosurecomponents (Onboard Administrator and Virtual Connect). This testingensures the highest quality as well as providing the input for HP SUM todeploy updates taking into account all interdepencies, when determiningthe correct updates and order of update deployment.NOTE: The Service Pack for ProLiant (which includes HP SUM) can bedownloaded from www.hp.com/go/spp/download. More information canbe found: http://www.hp.com/go/SmartUpdate, www.hp.com/go/spp andhttp://www.hp.com/go/hpsumSecurity AvailabilityPower-on passwordAdministrator's passwordKeyboard password (QuickLock)HP iLO 4 On System Management Chipset with:o SSL encryptiono Secure Shell version 2o Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) onbrowser, CLP and XML scripting interfaceo AES and RC4 encryption of videoExternal USB port enable/disableNetwork server modeSerial interface controlTPM (Trusted Platform Module) 1.2 optionAdvanced Encryption Standard (AES)Memory Advanced ECC uses single device data correction (SDDC) to detect and correct single and allmulti-bit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supportedMemory online spare mode (also known as rank spare mode) detects a rank that is degradingand switches operation to the spare rank.Memory demand and patrol scrubbing to prevent accumulation of correctable errors andreducing the likelihood of unplanned downtime.Failed DIMM isolation improves the service time thus improving the overall systemavailability.Address parity protection available on RDIMMs and LRDIMMs detects address bit errorsc04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 7

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard Featuresimproving service time and overall system availability.Mezzanine options and I/O FlexibleLOM connector supporting two (i.e. redundant) Ethernet ports.Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards eachsupporting multiple data paths routed to redundant interconnect modules.Network Adapter Teaming (bonding) provides network fault tolerance, transmit loadbalancing, and switch-assisted load balancing.Storage Two (2) Small Form Factor hot-plug SAS/SATA/SSD drive bays.Integrated HP Smart Array P220i Controller with 512MB FBWC, RAID 0 and 1 support, andupgradeable firmware with recovery ROM capability.Optional HP D2200sb or D2220sb Storage Blade for direct attached and shared storage withinthe c-Class enclosure.Optional dual-port Fibre Channel mezzanine cards for redundant SAN connections.Processor/Chipset Processor internal sensors & thermal control protection against over-temperatureconditions.Cache parity/ECC protects cache data from accidental data corruption.Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,memory ECC, parity, and cache, and improves service time.Server Blade Enclosure Infrastructure WarrantyPooled power for true N N power redundancy through up to six (6) hot-plug, high-efficiency,enclosure-based power supplies (configuration dependant).Up to ten (10) redundant enclosure-based hot-plug HP Active Cool fans that scale to meetfuture demands and optimize airflow, reduce power draw, and improve acoustic performance.Dual grid power providing redundant rack enclosure power feeds to the server bladeenclosure.HP Dynamic Power Saver Mode the total enclosure power consumption is monitored in realtime and automatically adjusted with changes in demand for improved efficiency andreliability.HP Dynamic Power Capping safely limits power usage without impacting performance bycapping peak instead of average power usage, removes risk to electrical infrastructure withfast-acting, hardware-based capping algorithm, and reclaims more power by dynamicallycontrolling power limits based on workload demand.Up to eight interconnect modules per server blade enclosure providing four simultaneousredundant fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, iSCSI,etc.Enclosure crosslinks between adjacent to provide interconnect module-to-moduleconnections or as Virtual Connect module stacking links.Optional enclosure redundant Onboard Administrator system management module.This product is covered by a global limited warranty and supported by HP Services and a worldwidenetwork of HP Authorized Channel Partners. Hardware diagnostic support and repair is available forthree years from date of purchase. Support for software and initial setup is available for 90 days fromc04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 8

QuickSpecsHP ProLiant BL465c Gen8 Server BladeStandard Featuresdate of purchase. Enhancements to warranty services are available through HP Care Pack services orcustomized service agreements. Certain restrictions and exclusions apply. Hard drives have either aone year or three year warranty; refer to specific hard drive QuickSpecs for details.NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairsmay be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into twocategories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge willresult when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are alsodesigned for easy replacement but may involve added complexity. Customers may choose to have HPreplace Optional CSR parts at no charge. Additional information regarding worldwide limited warrantyand technical support is available orms/warranty/index.html.c04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 9

QuickSpecsHP ProLiant BL465c Gen8 Server BladeOptional FeaturesFibre Channel SupportUp to two (2) optional Fibre Channel mezzanine HBAs are supported on the HP ProLiant BL465c Gen8.Compatible SANHP ProLiant BL465c Gen8 server blades are optimized for HP MSA, EVA and XP.HP ProLiant BL465c Gen8 server blades are compatible with select 3rd party SANs. Please see bladestorage page for more details ents/c-class-sans.html.HP Virtual ConnectHP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies serverconnectivity to data and storage networks, and reduces costs. Unique HP Flex-10 technology makesmaximum use of network bandwidths, provide dynamic tuning and enable extreme flexibility to meetindividual server and infrastructure requirements by allocating up to 4 network connections per serverport. Virtual Connect FlexFabric modules extend those capabilities to allocate one function per port tostorage connections. HP Virtual Connect Enterprise Manager (VCEM) provides server managementsoftware with a central console to administer network connections and workloads for thousands ofservers. For more information on Virtual Connect Enterprise Manager, seehttp://www.hp.com/go/vcem. For more information on Virtual Connect Ethernet, Fibre Channel,Converged Network and management options, see http://www.hp.com/go/virtualconnect.HP Insightmanagement softwareHP Insight ControlHP Matrix OperatingEnvironmentHP iLO Scale-OutHP iLO AdvancedHP Insight Control, a product option, delivers essential infrastructuremanagement that can help save time and money by making it easy todeploy, migrate, monitor, remote control, and optimize your ITinfrastructure through a single, simple management console. For moreinformation, see http://www.hp.com/go/insightcontrol.HP Insight Control includes one year of 24 x 7 HP Software TechnicalSupport and Update Service ensuring rapid access to HP support staff andproactive delivery of software updates. For more information about thisservice, see: http://www.hp.com/services/insight.The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrityservers is an integrated command center that helps you instantly adjust todynamic business demands. This advanced infrastructure managementsoftware lets you reduce the cost of common data center tasks by up to 40percent while keeping pace with your changing business.The HP Matrix OE includes the automated provisioning, optimization, andrecovery management capabilities for HP CloudSystem Matrix, the idealplatform for private cloud and Infrastructure as a Service (IaaS). For moreinformation, see http://www.hp.com/go/matrixoe.The HP iLO Scale-Out license ideal for web/hosting/cloud service providersand High Performance Computing environments. This license is a specificsubset of iLO Advanced functionality, provides fast remote access throughText Console via SSH, lower operational cost with Dynamic power capping,and faster time to resolution through Email-based Alerting and proactivenotifications. With this newly designed HP iLO Scale-Out license HPCcustomers now have a server management package solely design andpriced for their massive data environments. HP iLO Scale-Out is availableon all HP ProLiant Gen8 BL and SL platforms. For more information, see:www.hp.com/go/iLO/scale-outHP Integrated Lights-Out Advanced License a product option, providingsmart remote server management without compromise. iLO Advancedunlocks the full set of remote administration functionality for all HPProLiant servers by activating the full Virtual Keyboard Video and Mousec04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 10

QuickSpecsHP ProLiant BL465c Gen8 Server BladeOptional Featuresremote console, multi-user collaboration, console record and replay, GUIbased and scripted virtual media and virtual folders, and enhanced securityand power management functionality. For more information, see:http://www.hp.com/go/iloadvance.HP iLO AdvancedLicense for ProLiantServersHP iLO management processors for HP ProLiant Gen8 servers virtualizes system controls to helpsimplify server setup, engage health monitoring and power and thermal control, and promote remoteadministration. HP iLO functions out-of-the-box without additional software installation and functionsregardless of the servers' state of operation. The HP iLO can be accessed from any location via a webbrowser and works hand-in-hand with HP Systems Insight Manager, Insight Control, and MatrixOperating Environment, helping customers unleash the value of the ProLiant platform and deliver thehighest possible quality of IT service to the business.Advanced functionality, such as graphical remote console, multi-user collaboration, and videorecord/playback can be activated with the optional HP iLO Advanced or HP iLO Advanced forBladeSystem licenses. The Advanced licensed features offer sophisticated remote administration ofservers in dynamic data center and remote locations and can help significantly reduce cost associatedwith IT-related travel and unplanned downtime.NOTE: For more information, visit http://www.hp.com/go/ilo.HP OneViewThe HP OneView architecture combines server, storage, and networking with control of datacenterenvironmentals into a single, integrated management platform. Architected to deliver lifecyclemanagement for the complete Converged Infrastructure, it facilitates collaboration, removes friction,collapses cycle times, eliminates error-prone work, and accelerates time to value. HP OneView v1.0combines management of servers and virtual connect with open integration to automate andcustomize existing tools and processes. With OneView, you'll work smarter-with greater visibility andcontrol-and fully capitalize on the benefits of a Converged Infrastructure.For more information on HP OneView management, see: http://www.hp.com/go/oneview.High PerformanceClustersHP Cluster PlatformsHP HPC InterconnectsHP Insight ClusterManagement UtilityStorage SoftwareHP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with achoice of servers, networks and software. Operating system optionsinclude specially priced offerings for Red Hat Enterprise Linux and SUSELinux Enterprise Server, as well as Microsoft Windows HPC Server. A ClusterPlatform Configurator simplifies ordering. http://www.hp.com/go/clustersHigh Performance Computing (HPC) interconnect technologies are availablefor this server as part of the HP Cluster Platform portfolio. These highspeed InfiniBand and Gigabit interconnects are fully supported by HP whenintegrated within an HP cluster. Flexible, validated solutions can be definedwith the help of configuration ndex.htmlHP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management ofhyperscale clusters of Linux ProLiant systems. CMU includes software forthe centralized provisioning, management and monitoring of nodes. CMUmakes the administration of clusters user friendly, efficient, and effective.http://www.hp.com/go/cmuWhether you need to solve a specific data protection, archiving, or storage command and controlchallenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no furtherthan HP storage software. Our storage software helps you reduce costs, simplify storageinfrastructure, protect vital assets and respond faster to business opportunities.Storage software that gets the job done:c04128168 — DA – 14325 North America — Version 26 — March 30, 2015Page 11

QuickSpecsHP ProLiant BL465c Gen8 Server BladeOptional Features Data Protection and Recovery SoftwareWhether you're a large enterprise or a smaller business, HP data protection and recoverysoftware will cost-effectively protect you against disaster and ensure business continuity.Data Archive and Migration SoftwareHP's storage software enables you to comply with data retention and retrieval requirements,improve application performance, and reduce costs by efficiently migrating infrequentlyaccessed or less valuable data to lower cost storage.Storage Resource Management Software (SRM)HP's storage resource management software reduces operational costs and provides thecommand and control foundation you need to efficiently manage and visualize your physicaland virtual environments.Data Replication SoftwareHP offers array-based and host-based replication software for use in disaster recovery,testing, application development and reporting.Storage Device Management SoftwareMaximize your

QuickSpecs HP ProLiant BL465c Gen8 Server Blade Overview c04128168 — DA - 14325 North America — Version 26 — March 30, 2015 Page 1 HP ProLiant BL465c Gen8 Server Blade 1. HP Smart Array P220i Controller with 512MB FBWC 7. FlexibleLOM connector 2. Two (2) small form factor (SFF) hot plug drive bays 8.