I( !*, C#! % Va&.! - WATTS EUROPE

Transcription

Insert Check Valves Watts Industries produces an extensiveassortment of plastic check valves. These check valves can be found in watermeters, shower and bath taps and safetyunits, but they are also used in boilers, hotwater boilers, pumps and (underfloor) heatingsystems. The check valves are also used in industrialsystems. This in-house production of check valvesallows us to respond adequately to marketdevelopments, with new products andimprovements on existing products.

INSERT CHECK VALVESSUMMARY2CS - seriesIN - seriesPage 3Pages 8 and 9WI - seriesIO - seriesPage 3Pages 10 and 11CO - seriesWM - seriesPages 4 and 5Pages 12 and 13FI - seriesIW - seriesPages 6 and 7Page 14FO - seriesTO - seriesPages 6 and 7Page 14FW - seriesAuxiliaryMountingToolsPages 6 and 7Page 15

INSERT CHECK VALVESCS015 DN10 The Watts check valve type CS015 is the latest generation of check valves.Not only do these check valves operate ideally, they also offer added advantages:- identical contours in open and closed position (stem of valve doesn't protrude);- variable outlet system, facing side or rear side.The innovative use of materials in these valves renders them more resistant to bothchemicals and high temperatures. The CS is also more compact than conventionalcheck valves, and therefore easier to fit!Approvals: Kiwa (NL), DVGW (D), NF - ACS (F), ETA (DK), SITAC (S), Belgaqua (B).Other diameters on request. 0Product dimensionsø 14.9-0.1ø 11.1 0.1ø 14.6 0.1O’ringø 15 -0ø 15.5 0.1max. ø11.7Mounting dimensions15 0.116.2 -0161.78modelCS0150.15DN10Art. noW149015685WI020 DN20 The Watts check valve type WI020 shows the inventive solutions ofWatts Industries.Our R&D made this check valve for our customers with the same performancesthey are used to.Other diameters and closing pressures are also optional.Approvals: Kiwa (NL), DVGW (D), Belgaqua (B), SITAC (S), GDV (DK), NSF (US).Other diameters on request.Mounting dimensions32.1 0.5min 14.54.1 0.129.75 0.54.7 0.122.1 0.50ø 35.9 - 0.2ø 43.5 0.1ø 35.7 0.1ø 27 - 30ø 36 0.1ø 45 0.13.5 0.05ø 39 H7ø 37 0.2min ø 31.83.3 0.1ø 24.2 0.2Product dimensionsø 39 m9ø 26.77 0.1min 6O’ringmodelWI02036.8 0.5Technical specificationsWorking pressureTesting pressureNominal operating temperaturePeak temperatureDiameter nominalDiameter nominalPN101600 kPa65 C90 C for 1h per dayCS015 DN10WI020 DN20Material ngArt. noW149020650POMPOMPOMNBRNBRStainless steelPressure loss-curve100delta P (kPa)delta P (kPa)Pressure loss-curveDN209080701009080706060505040403030CS015 - DN1020WI020 - DN2020101000.20.40.60.81.01.2 flow(m3/h)00.81.62.43.24.04.85.66.47.28.0 flow (m3/h)3

INSERT CHECK VALVESCO seriesCO010 DN8CO014 DN10 The Watts check valves type CO with unique sealing principleoffers outstanding performances.4These check valves are used in plumbing fittings, sanitary tapsand in threaded non-return valves where building codes andinternational standards are required.Other diameters on request.Approvals: Kiwa (NL), Belgaqua (B), DVGW (D), NF - ACS (F), WRAS (UK),ETA - GDV (DK), SITAC (S), NSF (US).CO013 DN10CO015 DN10CO020 DN15Technical specificationsWorking pressureTesting pressureNominal operating temperaturePeak temperatureDiameter nominalMaterial ngmodelCO010CO014CO013CO015CO020PN101600 kPa65 C90 C for 1h per dayCO010: DN8CO014: DN10CO013: DN10CO015: DN10CO020: DN15DN810101015Art. 30POMPOMPOMNBRNBRStainless steelCO010 DN8CO014 DN10Mounting dimensionsØAO’ringØCØDØGØE15 Product dimensionsØFHJBKAll dimensions are given in mm.DN model8 CO01010 CO014ØA7.6011.70B10.716.3 0.10 0.10ØC10 0.1014 0.10ØD10.7 0.114.5 0.1ØE710.82ØF1.51.78ØG9.913.9 0.05 0.05H10.5 0.1516 0.15-0.2J10.6517.2K13.7521.2

INSERT CHECK VALVESCO013 DN10CO015 DN10CO020 DN15Mounting dimensionsØAO’ringØCØD5Product dimensionsØEØG15 ØFHBJKAll dimensions are given in 16.216.317.8 0.10 0.10 0.10ØC13 0.1015 0.1020 0.10ØD13.5 0.115.5 0.120.5 0.1ØE9.2511.116ØF1.781.782ØG12.914.919.9 0.05-0.1 0.05-0.1 0.05-0.1H16 0.116 0.1517.5 0.1J16.116.1517.6K19.220.423.1delta P (kPa)Pressure loss-curve100CO010 - DN890CO014 - DN10CO013 - DN1080CO015 - DN107060504030CO020 - DN15201000.40.81.21.62.0Classical guiding of valve stemSome vibrations can occur at low flow rates (water flushat night).These vibrations are generated by possible lateralmovements of the valve.Until now it was not possible to avoid this defect withoutaffecting the hydraulic characteristics.2.42.83.23.64.0 flow (m3/h)Guiding of valve stem (WATTS)Thanks to the unique guide system by slotted stemthat eliminates the possibility of movement and optimalhydraulic profile, vibrations are eliminated.By providing this guidance without the possibility ofmovement avoids calcareous deposits and vibration,ensuring a flawless and quiet operation for years.

INSERT CHECK VALVESFI010 DN8FI - FO - FW series The Watts check valve type FI, FO and FW is a perfect slide-incartridge with added advantages.6The best performance in those inlet sides where tightening has tobe simple.It is marked by its unique construction and its universal applications.FI015 DN15FO015 DN15Technical specificationsWorking pressureTesting pressureNominal operating temperaturePeak temperatureDiameter nominalMaterial ngPN101600 kPa65 C90 C for 1h per dayFI010: DN8FI015: DN15FO015: DN15FO020: DN20FW010: DN10POMPOMPOMNBRNBRStainless steelApproval:GDV (DK)FO020 DN20modelFI010FI015FO015FO020FW010Approval:GDV (DK)FW010 DN10Approvals:Kiwa (NL),Belgaqua (B),DVGW (D),NF - ACS (F),NSF (US).DN815152010Art. 60

INSERT CHECK VALVESFI010 DN8FI015 DN15Mounting dimensionsProduct dimensionsMounting dimensionsProduct dimensionsEEØBØAD7ØAØBFDØCFO015 DN15ØCFO020 DN20Mounting dimensionsProduct dimensionsMounting dimensionsProduct dimensionsEEØAØBDØAØBDFØCFØCFW010 DN10Mounting dimensionsProduct dimensionsHØAØBKGDJFEØCAll dimensions are given in 03044.523 0.1 0.5 0.5 0.2 0.1ØB1218.5 0.119.5 0.124 0.213.13ØC12.7 0.116.2 0.216.2 0.222 0.214.4 0.2D 0.222.4 0.22.4 0.22.5 0.22.15 0.1E2.157.77.710.54.7 0.2F2.72.72.50.7 0.2G4.6 0.1H2.7 0.1J16.8 0.05K19.4 0.1delta P (kPa)Pressure loss-curve100FI010 - DN8908070FW010 - DN1060FO020 - DN2050FI015 - DN15FO015 - .47.28flow (m3/h)

INSERT CHECK VALVESIN serie The Watts snap-in valve type IN is a compact and thereforeeasy to install check valve.8The advantage for OEM applications is, that in case of a sideconnection in the housing, the O-ring can be mounted first andsecondly the check valve itself.This way the O-ring will not be damaged by the sharp edges ofthe side- connection.This check valve will meet all quality requirements.Its advantages are yours.Approvals: Kiwa (NL), Belgaqua (B), DVGW (D), NF - ACS (F),WRAS (UK), ETA - GDV (DK), SITAC (S), NSF (US),AWQC (AUS).Technical specificationsWorking pressureTesting pressureNominal operating temperaturePeak temperatureDiameter nominalMaterial ngmodelIN015IN020IN025IN032IN040IN050PN101600 kPa65 C90 C for 1h per dayIN015: DN15IN020: DN20IN025: DN25IN032: DN32IN040: DN40IN050: DN50DN152025324050Art. 10W149050610POMPOMPOMNBRNBRStainless steelIN015 DN15IN025 DN25IN040 DN40IN020 DN20IN032 DN32IN050 DN50Mounting dimensionsO’ringØJØGØFProduct dimensionsØAØ H (max.)30 20 EBL (min.)CKDAll dimensions are given in .07 0.07 0.1 0.1B12.217.021.526.6533.345.8 0.4 0.4 0.4 0.4 0.4 0.4C1723.228.537.745.357.3 0.5 0.5 0.5 0.5 0.5 0.5D23.032.438.451.461.180.5 0.5 0.5 0.5 0.5 0.5 .820.625.832.941.251.9 0.1 0.1 0.1 0.1 0.1 539.549.6 0.10 0.10 0.10 0.10 0.10 0.10K7.410.813.917.020.1524.3 0.30 0.10 0.30 0.30 0.30 0.30L0.20.40.60.81.01.2

INSERT CHECK VALVESdelta P (kPa)Pressure loss-curve100909807060IN020 - DN2050IN015 - DN154030201000.81.62.43.24.04.85.66.47.28.0flow (m3/h)delta P (kPa)Pressure loss-curve1009080706050IN032 - DN3240IN025 - DN2530201002468101214161820flow (m3/h)delta P (kPa)Pressure loss-curve1009080IN050 - DN50IN040 - DN407060504030201008162432404856647280flow (m3/h)

INSERT CHECK VALVESIO serie To meet the ever increasing quality requirements,Watts developed the snap-in check valve type IO.10The O-ring is already mounted and fixated on the check valve,thus creating an easy to mount check valve.Approvals: Kiwa (NL), Belgaqua (B), DVGW (D), NF - ACS (F),WRAS (UK), ETA - GDV (DK), SITAC (S), NSF (US).Technical specificationsWorking pressureTesting pressureNominal operating temperaturePeak temperatureDiameter nominalMaterial ngmodelIO015IO020IO025IO032IO040IO050PN101600 kPa65 C90 C for 1h per dayIO015: DN15IO020: DN20IO025: DN25IO032: DN32IO040: DN40IO050: DN50DN152025324050Art. 20W149050620POMPOMPOMNBRNBRStainless steelIO015 DN15IO025 DN25IO040 DN40IO020 DN20IO032 DN32IO050 DN50Mounting dimensionsO’ringProduct dimensionsØFØJØAØGØ H (max.)30 20 EBCL (min.)DKAll dimensions are given in .07 0.07 0.1 0.1B13.317.024.326.6533.345.8 0.4 0.4 0.4 0.4 0.4 0.4C18.023.231.337.745.357.3 0.5 0.5 0.5 0.5 0.5 5.832.941.251.9 0.1 0.1 0.1 0.1 0.1 539.549.6 0.10 0.10 0.10 0.10 0.10 0.10K8.410.816.717.020.1524.3 0.30 0.10 0.30 0.30 0.30 0.30L0.20.40.60.81.01.2

INSERT CHECK VALVESdelta P (kPa)Pressure loss-curve1009011807060IO020 - DN2050IO015 - DN154030201000.81.62.43.24.04.85.66.47.28.0flow (m3/h)delta P (kPa)Pressure loss-curve1009080706050IO032 - DN3240IO025 - DN2530201002468101214161820flow (m3/h)delta P (kPa)Pressure loss-curve1009080IO050 - DN50IO040 - DN4070605040302010081624324048566472flow80(m3/h)

INSERT CHECK VALVESWM serie The Watts slide-in check valve type WM features a noiselessoperation, very low pressure loss and absolute sealing at high andlow back pressures.12The split valve stem principle guarantees a trouble free operationfor many years.Approvals: Kiwa (NL), Belgaqua (B), DVGW (D),NF (F) except DN40, - ACS (F), ETA - GDV (DK),SITAC (S), NSF (US).Technical specificationsWorking pressureTesting pressureNominal operating temperaturePeak temperatureDiameter nominalMaterial lWM015WM020WM025WM040PN101600 kPa65 C90 C for 1h per dayWM015: DN15WM020: DN20WM025: DN25WM040: DN40DN15202540Art. MNBRStainless steelWM015 DN15WM025 DN25WM020 DN20WM040 DN40Mounting dimensionsProduct dimensionsFØG30 "ØEØ A1ØHØ A2KBCJDAll dimensions are given in .65 0.050-0.1 0.10 0.1B19.025.538.546.10-0.10-0.10-0.1 E020 -0.15025 -0.15032 -0.2046 -0.3F3.24.04.54.3 0.10 0.10 0.100-0.1ØG20.525.332.546.50-0.2 0.20 0.10 0.050ØH18.722.430.040.5 0.20 0.20 0.1 0.1JK21.0 0.53.0026.0 0.57.0042.0 0.1 8.049.0 0.1 10.00-0.20-0.3 0.1 0.1

INSERT CHECK VALVESdelta P (kPa)Pressure loss-curve100901380706050WM015 - DN154030201000.40.81.21.62.02.42.83.23.64.0flow (m3/h)delta P (kPa)Pressure loss-curve1009080706050WM020 - DN204030201000.81.62.43.24.04.85.66.47.28.0flow (m3/h)Pressure loss-curve100delta P (kPa)delta P (kPa)Pressure loss-curve90802001801607014060120WM040 - DN4010050WM025 - DN254080306020401020012345678910flow (m3/h)0481216202428323640flow (m3/h)

INSERT CHECK VALVESIW020 DN20 The Watts check valve type IW020 shows the inventive solutions ofWatts Industries.14Our R&D made this check valve for our customers with the same performancesthey are used to.Other diameters are3also possible.Approvals: GDV (DK), NSF (US).0Mounting dimensionsO’ringOther diameters on request.Product dimensionsIø 11ø 16ø 20.6 0.1ø 19.8maxø 15.2 0.102.030 20 0.310.8 0modelIW02033min 0.4DN20Art. noW149020167TO015 DN15ø The TO015 is specially designed for hydraulic safety groups that are fitted to thecold water supply of storage water heaters.This special valve is tested according to the EN1487 and will stand a maximumhalf hour of heavy treatment with saturated steam up to 180 C during calamities.0Due to the PPS material, the TO015 valve will keep its form and function.The lip-seal is mounted in such a way that it will survive the passage of hightemperature steam during this simulated calamity.Approvals: Belgaqua (B), NF - ACS (F), ETA (DK), SITAC (S), AWQC (AUS).15 0.115.50Other diameters on request.Product dimensionsø 18.5 0.05O’ringø 15.60ø 18.3 - 0.1 0.10ø 18.6maxø 11.5ø 19.2 0.1Mounting dimensions 0.115.3 - 0.2516.8 0.51.78modelTO01522.8 0.5Art. noW149015640Pressure loss-curvedelta P (kPa)Technical specificationsWorking pressurePN10Testing pressure1600 kPaNominal operating temperature 65 CPeak temperature90 C for 1h per dayDiameter nominalIW020 DN20Diameter nominalTO015 DN15Material edoPOMPPSDiaphragmNBRO-ringNBRSpringStainless steelDN15100908070TO015- DN1560IW020 - DN20504030201000.81.62.43.24.04.85.66.47.28.0 flow (m3/h)

INSERT CHECK VALVESAuxiliary mounting tools In order to achieve a perfectly leaktight check valve construction, it is of crucialimport

Watts Industries produces an extensive assortment of plastic check valves. These check valves can be found in water meters, shower and bath taps and safety units, but they are also used in boilers, hot water boilers, pumps and (underfloor) heating systems. The check valves are also used in industrial systems. This in-house production of check valves allows us to respond .