Transcription
3806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-05193806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-0519Material Name: 502 CLEARVersion#:Name:01 (GHS)Date: 04/28/2015Material502IssueCLEARVersion #: 01 (GHS) Issue Date: 04/28/2015SECTIONIDENTIFICATION1801 1.MorganStreetSECTION 1. IDENTIFICATIONRockford, IL 61102Product name: ASI 502 CLEARPhone:(815) 968-9661 : ASI 502 CLEARProduct nameSDS Number: 149Revision Date:07/08/2015Supersedes Date: 01/18/2013Fax:(815) 968-9731www.gcelectronics.comManufacturer or supplier's detailsManufacturerCompanynameorof supplier'ssupplier details: American Sealants Inc.SAFETYDATA SHEETCompany name of supplier: AmericanSealants ress: 3806 Option PassAddress: Fort3806OptionPassWayne, IN 46818Fort Wayne, IN 46818ProductName: SILICONERUBBERTelephone: 260-489-0728Telephone: 260-489-0728Emergency telephone: Infotrac: 1-800-535-5053 (Within US)SECTION1.telephonePRODUCT AND: COMPANYIDENTIFICATIONInfotrac: 1-352-323-3500 1-800-535-5053(Within US)EmergencyInfotrac:(Outside29 CFR 1910.1200Infotrac: 1-352-323-3500 (Outside US)Product Type:SealantRecommendeduseofthechemicalRUBBERand restrictions on useProduct Name:SILICONERecommendeduseofthechemicaland restrictions on useRecommendedusePartNumber(s):10-150: Adhesive, binding agentsRecommended use: Adhesive, binding agentsEmergency Contact: ChemtrecPhone:(800) 424-9300SECTION 2. HAZARDS IDENTIFICATIONSECTION2. HAZARDSIDENTIFICATIONSECTION2. HAZARDSIDENTIFICATIONGHS ClassificationGHSClassificationNota hazardoussubstance or mixture.Not a hazardous substance or mixture.GHS Label elementGHSLabel elementNota hazardoussubstance or mixture.Not a hazardoussubstance or mixture.PrecautionaryStatements: Prevention:Precautionary Statements: P271Prevention:Use only outdoors or in a well-ventilated area.P271 Use only outdoors or in a well-ventilated area.Other hazardsOtherhazardsNoneknown.None known.SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTSSECTION3. COMPOSITION/INFORMATIONON INGREDIENTSSECTION3. COMPOSITION/INFORMATIONON INGREDIENTSSubstance / Mixture: MixtureSubstance / Mixture: MixtureChemical nature: Silicone elastomerChemical nature: Silicone elastomerHazardous lNameSilicondioxideSilicon dioxideDistillates(petroleum), hydrotreated middleDistillates (petroleum), hydrotreated 742-46-7Concentration (%)Concentration 5 - 10(%) 55 - - 1010 5 - 10SECTION 4. FIRST AID MEASURESSECTION 4. FIRST AID MEASURESIf inhaled: If inhaled, remove to fresh air.If inhaled: If inhaled, remove to fresh air.1 / 121 / 12Part Number(s): 10-150Page 1 of 14
GHS Label elementNot a hazardous substance or mixture.Precautionary Statements: Prevention:P271 Use only outdoors or in a well-ventilated area.Other hazardsNone known.1801 Morgan StreetRockford, IL 61102Phone:(815)968-9661Substance/ MixtureFax:(815) 968-9731Chemicalnaturewww.gcelectronics.comSDS Number: 149Revision Date:07/08/2015Supersedes Date: 01/18/2013SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTSHazardous ingredients: Mixture: Silicone elastomerSAFETY DATA SHEETSAFETY DATA SHEETComplies with OSHA Hazard CommunicationChemical NameCAS-No.Silicon dmiddle64742-46-7Product Name: SILICONE RUBBERStandard29 CFR 1910.1200Concentration(%) 5 - 10 5 - 1038063806 OptionOption PassPass –– FortFort Wayne,Wayne, ININ –– PH:PH: 260-489-0728260-489-0728 –– Fax:Fax: Name: 502SECTION4.CLEARFIRSTAID MEASURESSECTION4. 502FIRSTAID MEASURESVersion#:Version#: 0101 (GHS)(GHS) IssueIssue Date:Date: 04/28/201504/28/2015If inhaled: If inhaled, remove to fresh air.Get medicalmedical attentionattention ifif symptomssymptoms occur.occur.GetInIn casecase ofof skinskin contactcontact1 / 12 and soap as a precaution.:: WashWash withwith waterwater and soap as a precaution.GetmedicalGet medical attentionattention ifif symptomssymptoms occur.occur.InIn casecase ofof eyeeye contactcontact:: FlushFlush eyeseyes withwith waterwater asas aa ionGet medical attention if irritation developsdevelops andand persists.persists.IfIf swallowedswallowed:: IfIf swallowed,swallowed, DODO NOTNOT induceinduce vomiting.vomiting.GetGet medicalmedical attentionattention ifif symptomssymptoms occur.occur.RinseRinse mouthmouth thoroughlythoroughly withwith water.water.MostMost importantimportant symptomssymptomsandeffects,and effects, bothboth acuteacute andanddelayeddelayed:: NoneNone known.known.ProtectionProtection ofof first-aidersfirst-aiders:: NoNo specialspecial precautionsprecautions areare necessarynecessary forfor firstfirst aidaid responders.responders.NotesNotes toto physicianphysician:: TreatTreat symptomaticallysymptomatically andand 5. FIRE-FIGHTINGFIRE-FIGHTINGMEASURESSECTION5. FIRE-FIGHTINGMEASURESSuitableSuitable extinguishingextinguishing mediamedia:: WaterWater spraysprayAlcohol-resistant foamfoamAlcohol-resistantDrychemicalDry chemicalCarbon(CO2)Carbon dioxidedioxide (CO2)Unsuitable extinguishingextinguishingUnsuitablemediamediaNone known.known.:: NoneSpecificSpecific hazardshazards duringduring firefirefightingfighting:: ExposureExposure toto combustioncombustion productsproducts maymay bebe aa hazardhazard toto health.health.HazardousHazardous combustioncombustion prodproductsucts:: CarbonCarbon oxidesoxidesSiliconSilicon oxidesoxidesFormaldehydeFormaldehydeSpecific:: UseSpecific extinguishingextinguishing methmethUse extinguishingextinguishing measuresmeasures thatthat areare appropriateappropriate toto locallocal scumstances and the surrounding environment.Part Number(s): 10-150UseUse waterwater sprayspray toto coolcool unopenedunopened containers.containers.Remove undamagedundamaged containerscontainers fromfrom firefire areaarea ifif itit isRemoveis safesafe toto dodoso.Page 2 of 14
delayedProtection of first-aiders: No special precautions are necessary for first aid responders.Protection of first-aidersNotes to physician: No special precautions are necessary for first aid responders.: Treat symptomatically and supportively.Notes to physician: Treat symptomatically and supportively.SECTION 5. FIRE-FIGHTING MEASURESSECTION 5. FIRE-FIGHTING MEASURESSuitableextinguishing1801MorganStreetmedia : Water sprayfoamAlcohol-resistantSuitable extinguishingWater sprayRockford,IL 61102 media : DrychemicalAlcohol-resistant foamPhone: (815) 968-9661Carbondioxide (CO2)Dry chemicalFax:(815) omSDS Number: 149Revision Date:07/08/2015Supersedes Date: 01/18/2013Carbon dioxide (CO2): None known.mediaUnsuitable extinguishing: None known.mediaSAFETY DATA SHEET: Exposure to combustion products may be a hazard to health.Specific hazards during fireComplieswithOSHAHazardCommunication Standard 29 CFR 1910.1200fighting: Exposure to combustion products may be a hazard to health.Specific hazards during firefightingHazardous combustion prod- : Carbon oxidesProductName: SILICONE RUBBERuctsHazardous combustion prod- : SiliconCarbonoxidesoxidesFormaldehydeuctsSilicon oxidesFormaldehydeSECTION 5. FIRE-FIGHTING MEASURES(CONTINUED)Specific extinguishing methodsSpecific extinguishing methods: Use extinguishing measures that are appropriate to local cirand themeasuressurrounding: cumstancesUse extinguishingthatenvironment.are appropriate to local s and the surrounding environment.Removeundamagedcontainersfromfire area if it is safe to doUse water spray to cool unopened containers.so.Remove undamaged containers from fire area if it is safe to doEvacuatearea.SAFETY DATA SHEETso.Evacuate area.Special protective equipment : Wear self-contained breathing apparatus for firefighting if necforfire-fightersSpecialprotective equipment : essary.Wear self-contained breathing apparatus for firefighting if necUsepersonal protective equipment.for fire-fightersessary.Use personal protective equipment.3806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-0519SECTION6. 502ACCIDENTALRELEASE SE MEASURESVersion#: 01 (GHS)IssueDate: 04/28/2015SECTION6. ACCIDENTALRELEASE MEASURESPersonal precautions, protec-: Follow safe handling advice and personal protective equip-Personal precautions, protective equipment and emergency procedures: Follow safe handling advice and personal protective equipment recommendations.2 / 12Environmental precautions: Discharge into the environment must be avoided.Prevent further leakage or spillage if safe to do so.Retain and dispose of contaminated wash water.Local authorities should be advised if significant spillagescannot be contained.Methods and materials forcontainment and cleaning up: Soak up with inert absorbent material.For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can bepumped, store recovered material in appropriate container.Clean up remaining materials from spill with suitable absorbent.Local or national regulations may apply to releases and disposal of this material, as well as those materials and itemsemployed in the cleanup of releases. You will need to determine which regulations are applicable.Sections 13 and 15 of this SDS provide information regardingcertain local or national requirements.2 / 12SECTION 7. HANDLING AND STORAGETechnical measures: See Engineering measures under EXPOSURECONTROLS/PERSONAL PROTECTION section.Part Number(s): 10-150Local/Total ventilation: Use only with adequate ventilation.Page 3 of 14
tive equipment and emergency proceduresgency proceduresEnvironmental precautionsEnvironmental precautionsMethods and materials forment recommendations.: Discharge into the environment must be avoided.: Discharge into the environment must be avoided.Prevent further leakage or spillage if safe to do so.Prevent further leakage or spillage if safe to do so.Retain and dispose of contaminated wash water.Retain and dispose of contaminated wash water.Local authorities should be advised if significant spillagesLocalauthoritiesshould be advised if significant spillagescannotbe contained.cannot be contained.: Soak up with inert absorbent material.Methodsand materialsfor: Soak up with inert absorbent material.1801MorganStreetSDS Number: 149containmentandcleaning upFor large spills, provide diking or other appropriate containcontainment and cleaning upFor large spills, provide diking or other appropriate containment to keep material from spreading. If diked material canbeRockford, IL 61102RevisionDate:07/08/2015ment to keep material from spreading. If diked material can bepumped, store recovered material in appropriate container.Phone: (815) 968-9661Supersedes Date: 01/18/2013pumped, store recovered material in appropriate container.Clean up remaining materials from spill with suitable absorFax:(815) 968-9731Clean up remaining materials from spill with suitable absorbent.bent.www.gcelectronics.comLocal or national regulations may apply to releases and dis-ProductLocal or national regulations may apply to releases and disposal of this material, as well as those materials and itemsposal SAFETYof this material,DATAas well asSHEETthose materials and itemsemployed in the cleanupof releases. You will need to deteremployed in the cleanup of releases. You will need to determine which regulationsare applicable.Complies with OSHACommunicationStandard 29 CFR 1910.1200mine Hazardwhich regulationsare applicable.Sections 13 and 15 of this SDS provide information regardingSections 13 and 15 of this SDS provide information regardingcertain local or national requirements.certainlocal or national requirements.Name: SILICONE RUBBERSECTION 7. HANDLING AND STORAGESECTION7. HANDLINGAND STORAGESECTION7. HANDLINGAND STORAGETechnical measuresTechnical measures: See Engineering measures under EXPOSURE: See Engineering measures under EXPOSURECONTROLS/PERSONAL PROTECTION section.CONTROLS/PERSONAL PROTECTION section.Local/Total ventilationLocal/Total ventilation: Use only with adequate ventilation.: Use only with adequate ventilation.Advice on safe handlingAdvice on safe handling: Handle in accordance with good industrial hygiene and safety: Handle in accordance with good industrial hygiene and safetypractice.practice.Take care to prevent spills, waste and minimize release to theTake care to prevent spills, waste and minimize release to theenvironment.environment.Conditions for safe storageConditions for safe storage: Keep in properly labeled containers.: rs.the particular national regulations.Store in accordance with the particular national regulations.Materials to avoidMaterials to avoid: Do not store with the following product types:: Do not store with the following product types:Strong oxidizing agentsStrong oxidizing agentsSECTION8. EXPOSURECONTROLS/PERSONALPROTECTIONSAFETYSECTION8. EXPOSURECONTROLS/PERSONALPROTECTIONSECTION8. EXPOSURECONTROLS/PERSONALPROTECTIONIngredients with workplace control parametersIngredients with workplace control parametersIngredientsCAS-No.Value typeIngredientsCAS-No.Value type(Form of(Form ofexposure)3806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-0519exposure)Silicon dioxide7631-86-9TWA (Dust)MaterialName:dioxide502 CLEARSilicon7631-86-9TWA (Dust)TWA (Mist)Control parameBasisControl parameBasisters / Permissibleters / Permissibleconcentrationconcentration20 MillionOSHA Z-320 MillionOSHA Z-3particles per cubicparticles per cubicfootfoot(Silica)(Silica)80 mg/m3OSHA Z-3/ %SiO2(Silica)6 mg/m3NIOSH REL(Silica)5 mg/m3OSHA Z-1TWA (Mist)TWA (Mist)ST (Mist)5 mg/m35 mg/m310 mg/m3Version #: 01 (GHS) Issue Date: 04/28/20153 / 123 / 12TWA (Dust)TWADistillates (petroleum),hydrotreated middle64742-46-7DATA SHEETOSHA P0NIOSH RELNIOSH RELEngineering measures: Processing may form hazardous compounds (see section10).Ensure adequate ventilation, especially in confined areas.Part Number(s): 10-150Minimize workplace exposure concentrations.Page 4 of 14
SAFETY DATA SHEET38061801Option Pass– Fort Wayne,MorganStreetIN – PH: 260-489-0728 – Fax: 260-489-0519SDS Number: 149Revision Date:07/08/2015Supersedes Date: 01/18/2013Rockford,61102MaterialName: 502ILCLEARVersion #: 01 (GHS) Issue Date: 04/28/2015Phone: (815) 968-9661Fax:(815) 968-9731www.gcelectronics.comComplies withDistillates (petroleum),TWA (Dust)80 mg/m3/ %SiO2(Silica)SAFETY DATA SHEETTWA6 mg/m3OSHA Hazard CommunicationStandard(Silica)64742-46-7TWA (Mist)5 mg/m3OSHA Z-3NIOSHREL29 CFR1910.1200hydrotreatedmiddle SILICONE RUBBERProductName:OSHA Z-1TWA (Mist)5 mg/m3OSHA P0TWA (Mist)5 mg/m3NIOSH RELSECTION 8. EXPOSURE CONTROLS/PERSONALPROTECTION(CONTINUED)ST (Mist)10 mg/m3NIOSH RELEngineering measures: Processing may form hazardous compounds (see section10).Ensure adequate ventilation, especially in confined areas.Minimize workplace exposure concentrations.Personal protective equipmentRespiratory protection: General and local exhaust ventilation is recommended tomaintain vapor exposures below recommended limits. Whereconcentrations are above recommended limits or areunknown, appropriate respiratory protection should be worn.Follow OSHA respirator regulations (29 CFR 1910.134) anduse NIOSH/MSHA approved respirators. Protection providedby air purifying respirators against exposure to anyhazardous chemical is limited. Use a positive pressure airsupplied respirator if there is any potential for uncontrolledrelease, exposure levels are unknown, or any othercircumstance where air purifying respirators may not provideadequate protection.Hand protectionRemarks: Wash hands before breaks and at the end of workday.Eye protection: Wear the following personal protective equipment:Safety glassesSkin and body protection: Skin should be washed after contact.Hygiene measures: Ensure that eye flushing systems and safety showers arelocated close to the working place.When using do not eat, drink or smoke.Wash contaminated clothing before re-use.These precautions are for room temperature handling. Use atelevated temperature or aerosol/spray applications may require added precautions.SECTION 9. PHYSICAL AND CHEMICAL PROPERTIESAppearance: pastePart Number(s): 10-150Color: colorlessPage 5 of 14
Initialboilingrespiratorpoint andifboiling: Notapplicablesuppliedthere is anypotentialfor uncontrolledrangerangerelease, exposure levels areunknown,oranyotherFlash point: 100 Ccircumstance where air purifying respirators may not provide Method: closed cupFlashpoint: 100 CadequateFlashpoint protection.: 100 CMethod: closed cupMethod:Evaporationrateclosed cup: Not applicableHand protectionRemarksEye protection1801Morgan StreetRockford, IL 61102Phone:968-9661Skin and (815)body protectionFax:(815) es withEvaporationrate: Not applicableEvaporation rate: Not applicableFlammability(solid, gas): Not classified as a flammability haz: Wash hands before breaks and at the end of workday.Flammability(solid, gas): Not classified as a flammability hazFlammability (solid, gas): explosionNot classifiedUpperlimitas a flammability: No hazarddata available: Wear the following personal protective equipment:SDSNumber: slimitUpperexplosion: explosionNo data availableLowerlimit: No data availableRevision Date:07/08/2015Lowerexplosionlimit: No dataavailableSupersedesDate:01/18/2013: Skinexplosionshould belimitwashed aftercontact.Lower: pressureNo data availableVapor: Not applicableVaporNot applicable: Ensurethat eye flushing systemsandsafetyshowers are :: NoVaporpressure: pressureNotapplicableRelativevapordensitydata availablelocated close to the working place.Relativevapordensity:Nodata availableWhenvaporusingdensitydo not eat, drinkorRelative: smoke.Nodata availableRelativedensity: 1.007SAFETYDATASHEETWash contaminated clothing beforere-use. DATA SHEETSAFETYdensity: at1.007OSHAHazardCommunicationStandard29 CFRUse1910.1200Theseprecautionsare forRelativeroomhandling.Relativedensity: temperature1.007elevated temperature or aerosol/spraySolubility(ies)applications may requireaddedprecautions.Product Name: SILICONE RUBBERWater bility:Water solubility: Nocoefficient:data ��PH:260-489-0728–Fax:260-489-0519SECTION9. PHYSICALAND CHEMICALPROPERTIESSECTION9. PHYSICALAND n coefficient: n: Nocoefficient:data availableMaterial Name: 502 CLEARoctanol/waterVersionAppearance#: 01 (GHS) Issue Date: 04/28/2015 octanol/water: pasteAutoignition temperature:No data availableNo data availableNo data availableNo data availableNo data availableAutoignitiontemperature:No data availableAutoignition: No data temperatureavailableColor: colorlesstemperatureDecomposition: No data availableDecompositiontemperature: No data available4 / 12Decompositiontemperature Viscosity: No data availableOdor: Acetic acidViscosity, dynamic: Not applicableViscosityViscosityOdor Threshold: No data availableViscosity,dynamic: Not applicableapplicableViscosity, dynamic: NotpropertiesExplosive: Not explosivepH: Not applicableExplosiveproperties: Not explosiveExplosive properties: NotpropertiesexplosiveOxidizing: The substance or mixture is not claMelting point/freezing point: No data availableOxidizingTheclassifiedsubstancemixture is not claOxidizing properties: Thepropertiessubstance or mixture ::is Nonotasoroxidizing.Molecularweightdata availableInitial boiling point and boiling: Not applicableMolecularweight: No data availableMolecular weight: No dataavailablerangeFlash pointEvaporation rateFlammability (solid, gas)SECTION 10. STABILITY AND REACTIVITY: 100 CSECTION10. STABILITY AND REACTIVITYMethod:closed cupSECTION10. STABILITYANDREACTIVITYReactivity: Not classified as a reactivity hazardReactivity: Notclassified as a reactivity hazard: Not applicableReactivity: Not classified as a reactivityhazard.5 / 12: Not classified as a flammability hazard 5 / 125 / 12Upper explosion limit: No data availableLower explosion limit: No data availableVapor pressure: Not applicableRelative vapor density: No data availableRelative density: 1.007Solubility(ies)Water solubility: No data availablePartition coefficient: noctanol/water: No data availableAutoignition temperature: No data availableDecomposition temperature: No data availablePart Number(s): 10-150ViscosityPage 6 of 14
Solubility(ies)Water solubility: No data availablePartition coefficient: noctanol/water: No data ckford,IL 61102DecompositiontemperaturePhone: (815) 968-9661Viscosity (815) 968-9731Fax:Viscosity, dynamicwww.gcelectronics.com: No data availableExplosive properties:CompliesOxidizing properties: No data availableSDS Number: 149Revision Date:07/08/2015Supersedes Date: 01/18/2013SAFETY DATA SHEETSAFETY DATA SHEETNot explosiveSAFETY DATA SHEET: Not applicablewith OSHAHazard CommunicationStandard29 CFR 1910.1200: The substanceor mixture is not classifiedas oxidizing.3806 OptionPass –weightFort Wayne, IN – PH: 260-489-0728– Fax:260-489-0519Molecular: No dataavailableProduct Name: SILICONE RUBBER3806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-0519Material Name: 502 CLEARVersion #: 01 (GHS) Issue Date: 04/28/2015Material Name: 502 CLEARSECTION10. STABILITYREACTIVITYVersion#: 01 (GHS)IssueSTABILITYDate: AND04/28/2015SECTION10.AND REACTIVITYReactivityChemical stabilityChemical stabilityPossibility of hazardous reactionsPossibility of hazardous reactions:::::Not classified as a reactivity hazard.Stable under normal conditions.Stable underconditions.5 / 12normalUse at elevatedtemperatures may form highly hazardouscompounds.Useat elevated temperatures may form highly hazardousCan react with strong oxidizing agents.compounds.Aceticacidwithis formedcontactwith water or humid air.Can reactstrong 50 C (300 F) inair.theAcetic acid is formed upon contact withwateror ybeWhen heated to temperatures above 150 C (300 F) in thereleased.presence of air, trace quantities of formaldehyde may beAdequatereleased. ventilation is required.SeeOSHAventilationformaldehydestandard, 29 CFR 1910.1048Adequateis required.Hazardousproducts 29willCFRbe formedat elevatedSee OSHA decompositionformaldehyde standard,1910.1048temperatures.Hazardous decomposition products will be formed at elevatedtemperatures.Conditions to avoid: None known.Conditions to avoid: None known.Incompatible materials: Oxidizing agentsIncompatible materials: Oxidizing agentsHazardous decomposition productsThermal decomposition: FormaldehydeHazardousdecomposition productsThermal decomposition: FormaldehydeSECTION 11. TOXICOLOGICAL INFORMATIONSECTION 11. TOXICOLOGICAL INFORMATIONSECTION 11. TOXICOLOGICAL INFORMATIONInformation on likely routes of exposureSkin contact on likely routes of exposureInformationIngestionSkin contactEyecontactIngestionEye contactAcutetoxicityAcutetoxicitybased on available information.NotclassifiedNotclassified based on available information.Product:Product:Acute inhalation toxicityAcute inhalation toxicity: Acute toxicity estimate: 10 mg/lExposuretime:4h: Acutetoxicityestimate: 10 mg/lTestatmosphere:Exposure time: 4 hdust/mistmethodMethod:Calculationdust/mistTest atmosphere:Method: Calculation methodIngredients:Ingredients:Silicon dioxide:Acuteoraltoxicity: LD50 (Rat): 3,300 :substanceAcute oral toxicity: LD50(Rat): The3,300mg/kg or mixture has no acute oral toxicityAssessment: The substance or mixture has no acute oral tox-Page 7 of 14
Conditions to avoid: None known.Incompatible materials: Oxidizing agentsHazardous decomposition productsThermal decomposition: MorganStreetSDS Number: 149Revision Date:07/08/2015Supersedes Date: 01/18/2013Rockford, IL 61102Information on likely routes of exposurePhone:(815) 968-9661Skin contactFax:Ingestion (815) 968-9731Eyecontactwww.gcelectronics.comAcute toxicitySAFETYNot classified based on available information.DATA SHEETComplies with OSHA Hazard Communication Standard 29 CFR 1910.1200Product:Acute inhalation toxicity: Acute toxicity estimate: 10 mg/lProduct Name: SILICONERUBBERExposuretime: 4 hTest atmosphere: dust/mistMethod: Calculation methodSECTION 11. TOXICOLOGICAL INFORMATION (CONTINUED)Ingredients:Silicon dioxide:Acute oral toxicityAcute inhalation toxicity: LD50 (Rat): 3,300 mg/kgDATASHEETAssessment: The substance or SAFETYmixture has noacute oraltoxicityRemarks: Information taken from reference works and theliterature.: LC50 (Rat): 2.08 mg/l3806 Option Pass – Fort Wayne, IN – PH: 260-489-0728– Fax:time:260-489-0519Exposure4hMaterial Name: 502 CLEARVersion #: 01 (GHS) Issue Date: 04/28/2015Acute dermal toxicityTest atmosphere: dust/mistAssessment: The substance or mixture has no acute inhalation toxicityRemarks: Information taken from reference works and theliterature.6 / 12: LD50 (Rabbit): 5,000 mg/kgAssessment: The substance or mixture has no acute dermaltoxicityRemarks: Information taken from reference works and theliterature.Distillates (petroleum), hydrotreated middle:Acute oral toxicity: LD50 (Rat): 5,000 mg/kgAcute inhalation toxicity: LC50 (Rat): 1.78 mg/lExposure time: 4 hTest atmosphere: dust/mistAcute dermal toxicity: LD50 (Rat): 2,000 mg/kgSkin corrosion/irritationNot classified based on available information.Ingredients:Silicon dioxide:Result: No skin irritationRemarks: Information taken from reference works and the literature.Serious eye damage/eye irritationPartNumber(s):10-150Not classifiedbasedon available information.Ingredients:Page 8 of 14
Acute dermal toxicity: LD50 (Rabbit): 5,000 mg/kgAssessment: The substance or mixture has no acute dermaltoxicityRemarks: Information taken from reference works and theliterature.Distillates (petroleum), hydrotreated middle:Acute oral toxicity: LD50 (Rat): 5,000 mg/kg1801 Morgan StreetAcute inhalationtoxicity: LC50 (Rat): 1.78 mg/lRockford,IL 61102Exposure time: 4 hPhone: (815) 968-9661Test atmosphere: dust/mistFax:(815) 968-9731www.gcelectronics.comAcute dermal toxicity: LD50 (Rat): 2,000 mg/kgSDS Number: 149Revision Date:07/08/2015Supersedes Date: 01/18/2013SAFETY DATA SHEETSkin ation StandardNot classified based on available information.29 CFR 1910.1200Ingredients:ProductName: SILICONE RUBBERSilicon dioxide:Result: No skin irritationRemarks: Informationtaken from referenceworks and theliterature.SECTION11. TOXICOLOGICALINFORMATION(CONTINUED)Serious eye damage/eye irritationNot classified based on available information.Ingredients:Silicon dioxide:Result: No eye irritationRemarks: Information taken from reference works and the literature.Respiratory or skin sensitizationSkin sensitization: Not classified based on available information.Respiratory sensitization: Not classified based on available information.Ingredients:Silicon dioxide:Assessment: Does not cause skin sensitization.Test Type: Skin: test type not specifiedSpecies: Guinea pigRemarks: No known sensitising effect.Information taken from reference works and the literature.SAFETY DATA SHEETGerm cell mutagenicityNot classified based on available information.3806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-0519MaterialIngredients:Name: 502 CLEARVersion #: 01 (GHS) Issue Date: 04/28/2015Silicon dioxide:Genotoxicity in vitro: Result: negativeRemarks:7 Informationtaken from reference works and the/ 12literature.Genotoxicity in vivo: Application Route: IngestionResult: negativeRemarks: Information taken from reference works and theliterature.Germ cell mutagenicity Assessment: Animal testing did not show any mutagenic effects.CarcinogenicityNotbasedon available information.PartclassifiedNumber(s):10-150IARCNo ingredient of this product present at levels greater than orequal to 0.1% is identified as probable, possible or confirmedPage 9 of 14
SAFETY DATA SHEETSAFETY DATA SHEET3806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-0519MaterialName:502CLEAR3806 OptionPass– FortWayne, IN – PH: 260-489-0728 – Fax: 260-489-0519Version #: 01 (GHS) Issue Date: 04/28/20153806 Option Pass – Fort Wayne, IN – PH: 260-489-0728 – Fax: 260-489-0519Material Name: 502 CLEARMorganStreetVersion1801#: 01 (GHS)Issue Date:04/28/2015Material Name: 502 CLEARRockford,IL61102Remarks: Information taken fromVersion #: 01 (GHS) Issue Date: 04/28/2015SDS Number: 149reference works and theRevision Date:07/08/2015Supersedes Date: 01/18/2013literature.Phone: (815) 968-9661Remarks: Information taken from reference works and theFax:(815) 968-9731literature.Genotoxicity in vivo: ApplicationRoute: IngestionRemarks: Informationtaken from reference works and thewww.gcelectronics.comResult: negativeliterature.Genotoxicity in vivoGenotoxicity in vivo::ApplicationRoute: IngestionRemarks: Informationtaken from reference works and theSAFETYDATA SHEETnegativeResult:literature. Route: IngestionApplicationRemarks:Informationtaken from referenceworksthe1910.1200Complies with zardGerm cell mutagenicity : cts.Remarks: Information taken from reference works and theAssessmentliterature.ProductName: -SILICONERUBBERGermcell mutagenicity: Animaltesting did not show any mutagenic ng did not show any mutagenic XICOLOGICALIN
3806 Option Pass - Fort Wayne, IN - PH: 260-489-0728 - Fax: 260-489-0519 Material Name: 502CLEAR Version #: 01 (GHS) Issue Date: 04/28/2015 SECTION 1. IDENTIFICATION Product name : ASI 502CLEAR Manufactureror supplier's details Companyname of supplier : American Sealants Inc. Address : 3806 Option Pass Fort Wayne, IN 46818 Telephone : 260 .
