Transcription
Product Compliance DatasheetMARKETING NAME : Dell EMC PowerEdge R740, Dell EMC PowerEdge R740XDREGULATORY MODEL . .: E38SREGULATORY TYPE . : E38S001EMC EMISSIONS CLASS .: AEFFECTIVE DATE . .: March 1, 2020Table of contentsI.Statement of Compliance . 2II.Global Environmental Information . 3III.Declaration of Similarity. 4IV.Power Cords and User Documentation. 5V.Trade (Import/Export) Compliance Data . 5VI.Product Dimensions and Weight . 5VII.Performance Data . 5VIII.Product Materials Information . 6IX.Packaging . 7X.Batteries . 7XI.Design for Environment . 8XII.Recycling / End-of-Life Service Information . 8XIII.Helpful Links . 8Appendix C: ErP Lot 9 Servers and Data Storage Products: Information for end-users . 91Product Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.com
I.Statement of ComplianceThis product has been determined to be compliant with the applicable standards, regulations, anddirectives for the countries where the product is marketed. The product is affixed with regulatorymarking and text as necessary for the country/agency. Dell manufacturers and markets MultimediaEquipment (MME), Information Technology Equipment (ITE), Audio Visual Equipment (A/V),Industrial, Scientific, Medical Equipment (ISM) or combinations of these. Generally, productsElectromagnetic Compatibility (EMC) and Product Safety compliance is based on International IECand CISPR standards and their national equivalent along with national standards for Radio (wireless),Telecommunications (Modem) and Energy. Dell products have been verified to comply with theRestriction of Hazardous Substances (RoHS) Directive 2011/65/EU of the European Parliament andthe Council. Dell product does not contain any of the restricted substances in concentrations andapplications not permitted by the RoHS Directive.EMC Emissions Class refers to one of the following use environments: EMC Class B product is intended for use in residential/domestic environments but may alsobe used in nonresidential/non-domestic environments. EMC Class A product is intended for use in non-residential/non-domestic environments.Class A product may also be utilized in residential/domestic environments but may causeinterference and require the user to take adequate corrective measures.For Product Safety and EMC compliance, this product has been assigned a unique regulatory modeland regulatory type that is imprinted on the product regulatory labeling to provide traceability to theregulatory approvals noted on this datasheet. This datasheet applies to any product that utilizes theassigned regulatory model and type including marketing names other than those listed on thisdatasheet. Dell products with the CE marking have been verified to comply with Energy RelatedProducts (ErP) Directive 2009/125/EC of the European Parliament and of the Council.https://www.dell.com/ErP User Information. REACH (Registration, Evaluation, Authorization andRestriction of Chemicals), Regulation (EC) 1907/2006 of the European Parliament and of the Councilis the European Union’s (EU) chemical substances regulatory framework. Dell complies with theREACH regulation. For information on SVHC (Substances of Very High Concern), seewww.dell.com/REACH. This products compliance documentation, such as this datasheet and theEuropean Union Declaration of Conformity are available on the product support page, manuals tabhttp://www.dell.com/support. Additional compliance documentation for the product is available uponsubmitting a request at http://www.dell.com/regulatory compliance. Please include product identifierssuch as marketing name, regulatory model, regulatory type and country that compliance informationis needed in the email request.2Product Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.com
II.Global Environmental InformationEnvironmental (Voluntary ries by CountrySee EPEAT.netENERGY STAR (Configuration Dependent)CECPCECEPEAT (Configuration Dependent)Energy Star 3.0YesYesRefer to EPEAT.net forspecific registration levels andcountriesProduct Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.com
III. Declaration of SimilarityObject of the DeclarationProduct TypeRegulatory Model NumberRegulatory Type NumberTrade Name/ Trade MarkMarketing Name(s)2S ServerE38SE38S001DELL EMCDell EMC PowerEdge R740Dell EMC PowerEdge R740XDDell EMC PowerEdge OEM R740xdDell EMC PowerEdge OEMR R740Dell EMC PowerEdge R740 TelcoDell EMC PowerEdge R740XD TelcoDell EMC Integrated Data ProtectionAppliance DP4400Dell EMC VxRack SDDCDell EMC VxRail VXV570Dell EMC VxRail VXV570FDell EMC VxRail VXS570Dell EMC VxRail VXP570Dell EMC VxRail VXP570FDell EMC PowerEdge R749Dell EMC Storage NX3240Dell EMC ECS EX300Dell EMC Data Domain DD3300Dell Inc. herby declares that the products identified by the product designations listed in thisdeclaration are strictly identical in design (shape, opening, etc.) components, materials,manufacturing process, and markings except for product designation – Trade Name and/or TradeMark as specified in this declaration.The products may have very minor differences which do not impact the level of conformity. Allproducts identified by the product designations in this declaration have the same level of conformityaccording to the certificate(s) provided.The Trade Name / Trade Mark and/or Marketing Name(s) are the property of Dell Inc.Any differences in the product designation are for marketing purposes only.4Date of IssueMarch 01, 2020TitleDell Global ProductCompliance andEnvironmental AffairsProduct Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.comDell Inc.Signature on behalf Dell Global Productof Dell Inc.Compliance andEnvironmental Affairs
IV. Power Cords and User DocumentationDell products are provided with the power cord and user documentation suitable for the intendedcountry of delivery. Products that are relocated to other countries should use nationally certifiedpower cords and plugs to ensure safe operation of the product. Contact Dell to determine if alternatepower cords or user documentation in other languages is available for your market.V.Trade (Import/Export) Compliance DataFor any questions related to importing & exporting classification of Dell products, please obtaininformation from the following link: ort or sendemail request to WW Export Compliance@dell.com. Please include product identifiers such asmarketing name, regulatory model, regulatory type and country that compliance information is neededin the email request.VI. Product Dimensions and Weight2.5 inch hard drive m87mmWeight, kg26.3Kg Max3.5 inch hard drive m87mmWeight, kg28.6Kg MaxVII. Performance DataErP Lot 3, Lot 26 and ErP Lot 9 information is in Appendices A, B and C respectively.For additional information on how Dell’s commitment to energy efficiency benefits you go to:Reducing your FootprintFor additional information on ENERGY STAR models refer to the following database: ENERGYSTAR Product Finder5Product Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.com
VIII. Product Materials InformationInformation on Dell’s material use is available here.Dell’s Restricted Material for Use guidance document is available atwww.dell.com/restrictedsubstanceslist. The case material is Steel This product contains 0% post-consumer recycled plastic and /or closed loop recycled plastics(ITE-derived)*(*Measured as a percentage of total amount of plastic (by weight) in the product as per guidance in EPEAT standard asapplies to plastics parts)Mechanical plastic parts1 25 g are BFR/PVC freeMarking of plastics parts greater than 25 grams is in accordance withISO 11469 (see below)Printed circuit boards (without components) 25g are BFR PVC free 2Insulation materials of external electrical cables are PVC freeInsulation materials of internal electrical cables are PVC freeProduct is BFR/PVC Free (Accessories & Options may not beBFR/PVC-Free, refer to spec ENV0199) Yes No NA Yes No NA Yes No NA Yes No NA Yes No NA Yes NoFlame Retardants Used in MotherboardPartFlame RetardantMotherboardSPB-100Flame Retardants Used in Mechanical Plastic Parts 25 gramsResin MaterialNameCycoloyRCY6214Cycoloy C6200LEXAN HF1130Plastic PartMarking perISO11469:2016Flame RetardantMarking per ISO1043-4(i.e. FR(16),FR(40), etc.)Flame Retardant(i.e. TBBPA,triaryl phosphateester, etc.)List applicable RPhrase(s) orHazardStatement(s) perEU Directive67/548/EEG or1272/2008 PC ABS FR40V0N/A PC ABS FR40V0N/A PC ABS FR40V-2N/A1Mechanical plastic part: plastic parts that do not internally carry an electrical signal such as housings, brackets, bezels, latches, etc. thatform the basic structure of the product and/or have mechanical functions. Plastic parts such as fans, connectors, printer fuser assemblies,etc. are not considered “mechanical plastic parts” in the context of this specification. Plastics parts do not contain no more than 0,1% weight(1000 ppm) bromine and 0,1% weight (1000 ppm) chlorine attributable to brominated flame retardants, chlorinated flame retardants, andpolyvinyl chloride (Per Dell Spec ENV0424)2Dell will adopt the BFR/CFR/PVC-free definition as set forth in the "iNEMI Position Statement on the Definition of 'Low-Halogen' Electronics(BFR/CFR/PVC-Free)." Plastic parts contain 1000 ppm (0.1 percent) of bromine (if the Br source is from BFRs) and 1000 ppm (0.1 percent)of chlorine if the Cl source is from CFRs, PVC or PVC copolymers. All printed circuit board (PCB) and substrate laminates containbromine/chlorine totaling less than 1,500 ppm (0.15 percent), with maximum chlorine of 900 ppm (0.09 percent) and maximum bromine of900 ppm (0.09 percent)6Product Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.com
Mercury InformationNumber of bulbs0Average per bulb0 mgAdditional information: Refer to Dell Technologies’ Chemical Use Policy for more information on RoHS and REACH. Products MSDS (Material Safety Data Sheets):o Batteries: Battery MSDS Documentation and Declarationo Printer Toner and Ink: MSDS DocumentationIX. PackagingInformation on Dell’s sustainable packaging effort available here. Additional materials restricted inPackaging as per Dell’s Material Restricted for Use Standard document can be found atwww.dell.com/restrictedsubstanceslist.Packaging MaterialsCorrugated fiberboardX.Total Weight of each Materialtype, (kg)5.665EPS0EPE1.44Molded paper pulp0HDPE (includingthermoformed)0Molded Bamboo0LDPE Bags0Other, please specify0BatteriesBelow is a listing of batteries that could be present in the product:Battery Description – BatteriesBattery TypeBattery Weight (kg)CR-2032 coin cellLithium0.003 kgPERC BatteryLithium Ion0.016 kgNVDIMM BatteryLithium Ion0.29 kgRechargeable Battery 1 CellLithium Ion0.00577Product Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.com
XI. Design for EnvironmentDell systems are, when applicable, designed for easy assembly, disassembly, and sitXII. Recycling / End-of-Life Service InformationTake back and recycling services are offered for this product in certain countries. If you want todispose of system components, please visit www.dell.com/recyclingworldwide and select the relevantcountry.XIII. Helpful Links 8Environmental te corp-Comm vironment ll-environmentCorporate Social Responsibility rt?c us&l en&s corp&delphi:gr trueISO 14001 e.pdfMaterials Restricted for Usewww.dell.com/restrictedsubstanceslistChemical Use roduct Carbon corp-comm/environment carbon footprint productsRoHS /envt-info-materialsREACH Compliancewww.dell.com/REACHRecycling Informationhttp://www.dell.com/recyclingSupplier orp1/cr-social-responsibilityProduct Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.com
Appendix C: ErP Lot 9 Servers and Data Storage Products:Information for end-usersThe EU Commission Regulation (EU) 2019/424 (ErP Lot 9) ANNEX II Section 3.0 defines theinformation requirements to be provided by Manufacturers. This information is documented below orvia a link is provided to a free access website where the information is maintained. A reference columnis included to align the information with the format in the annex of the regulation. Where the informationhas already been recorded in the body of the Product Compliance Datasheet a note is made to avoidduplication.For any follow up a request should be sent to: http://support.dellproductcompliance.comHigh End Configuration:Annex IISect 3.1Reporting Requirementa.b.product typemanufacturer's name, registered trade name andregistered trade address at which they can be contacted;product model number, and if applicable the low-endperformance configuration and the high-endperformance configuration model numbers;year of manufacture;PSU efficiency at 10 % (if applicable), 20 %, 50 % and100 % of rated output power,power factor at 50 % of the rated load level, with theexception of direct current servers, rounded to threedecimal places;PSU rated power output (Watts), rounded to the nearestintegeridle state power, expressed in Watts (rounded to the firstdecimal place)product model number, and if applicable the low-endperformance configuration and the high-endperformance configuration model numbers;maximum power, expressed in Watts (rounded to thefirst decimal place);declared operating condition class,idle state power (Watts) at the higher boundarytemperature of the declared operating condition class,the active state efficiency and the performance in activestate of the server;secure data deletionlist recommended combinations with compatible chassisif a product model is part of a server product family, a listof all model configurations that are represented by themodel shall be supplied.c.d.e.f.g.h.i.j.k.l.m.n.o.p.9Product Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.comInformation Requirements /link to free access websitereference product compliance datasheet rreference product compliance datasheetreference product compliance datasheet07/11/2017reference ErP Lot 9 power supply tablereference ErP Lot 9 power supply tablereference ErP Lot 9 power supply table104.5W1 additional 1100W PSU, 3.5” HDDx2, additional380GB memory, Dual port 1G NIC Card638.9WOperating condition class A2132.8W [limit does not dracApplies to blade servers onlyAll available configurations can be selected onhttps://www.dell.com for a particular product model
Low End Configuration:Annex IISect 3.1Reporting Requiremente.PSU efficiency at 10 % (if applicable), 20 %, 50 % and 100% of rated output power,power factor at 50 % of the rated load level, with theexception of direct current servers, rounded to threedecimal places;PSU rated power output (Watts), rounded to the nearestintegeridle state power, expressed in Watts (rounded to the firstdecimal place)list of all components for additional idle power allowances,if any (additional PSU, HDDs or SSDs, additional memory,additional buffered DDR channels, additional I/O devices);maximum power, expressed in Watts (rounded to the firstdecimal place);declared operating condition class,idle state power (Watts) at the higher boundarytemperature of the declared operating condition class,the active state efficiency and the performance in activestate of the server;f.g.h.i.j.k.l.m.Information Requirement / link tofree access websitereference ErP Lot 9 server power supply tablereference ErP Lot 9 server power supply tablereference ErP Lot 9 server power supply table80.4W1 additional 495W PSU, 3.5” HDDx2, additional92GB memory, Dual port 10G and Dual port 1GNIC card180.7WOperating condition class A284.9W [limit does not apply]12.939ErP Lot 9 Server Power Supply Table(applicable for high end and low end configurationsLink to manufacturer’s efficiency report(List of 80 PLUS Certified Power Supplies)Power SupplyModel lutions.com/80PlusPowerSuppliesDetail.aspx?id 26&type 495E-S1Annex IISect 3.3h.i.10Reporting Requirementindicative weight range of the following CRMs:(a) Cobalt in the batteries;(b) Neodymium in the HDDsinstructions on the disassembly operations;Product Compliance Datasheet ENV0023 A16Dell, Inc. www.dell.comInformation Requirement / link tofree access e.comreference user manual in documentation tab onhttps://www.dell.com/support
This datasheet applies to any product that utilizes the . Dell EMC ECS EX300 Dell EMC Data Domain DD3300 Dell Inc. herby declares that the products identified by the product designations listed in this declaration are strictly identical in design (shape, opening, etc.) components, materials, .
