OBi100 VoIP Telephone Adapter & Voice Services Bridge - LDLC

Transcription

Detailed Technical SpecificationsOBi100 VoIP Telephone Adapter & Voice Services Bridgewith Support for Two (2) SIP and OBiTALK VoIP ServicesWith the OBi100, you are in control of your digital & analog communications life. Via the OBi100’s on-boardconnections as well as via the Internet to other OBi endpoints via Obihai’s free OBiTALK network or up to two (2)available VoIP services, you have the power to bridge mobile, fixed line and Internet telephone services.The OBi100 is a dedicated device, built with a high-performance system-on-a-chip platform to ensure high qualityvoice conversations. The OBi100 has high availability and reliability because it is always-on to make or receive a call.With the OBi100, a computer is not required and a computer does not need to be on to talk to people. To getstarted, all you need is a phone, power and a connection to the Internet.The OBi100 is Complemented by Other OBi Products & ServicesOBiTALK: A customer portal for device management allowing members to add people and associated OBi endpointsto “circles of trust” such that additional functionality can be shared amongst authorized users. The OBiTALK portal isalso where members can download the OBiAPP and OBiON applications for PCs and the iPhone, iPad, iPod touch &Android devices, respectively.OBiON iPhone, iPad, iPod touch & Android Devices: An application for iPhone, iPad, iPod touch and Android deviceswhich makes possible placing and receiving calls to/from other OBi endpoints.OBiON PC: A middleware application for a PC that facilitates placing and receiving calls to/from other OBi endpoints.-1-

Key Features of the OBi100 VoIP ATA & Voice Services Bridge:Aggregation and Bridging of Two (2) SIP and One (1) OBiTALK ServicesAutomatic Attendant for Simplified Call Routing (AA)Call Back Service – Connect to AA to Make a New Call or Ring the Attached PhoneOBiTALK Web Portal Integration Configuration and Management of OBi EndpointsDownload OBi Client Applications for Smart Phones, Internet Devices & PCsCreating & Joining Circles of Trust So You Can Share Your OBiSetting Up Your OBi Endpoint Speed Dial DirectoryConfigurable to Work with Any SIP Compliant Internet Telephone ServiceAnalog Phone Impedance AgnosticRobust Telephony Features: Message Waiting Indication - Visual and Tone BasedSpeed Dialing of 99 OBi Endpoints or NumbersThree Way Conference Calling with Local MixingHook Flash Event SignalingCaller ID – Name & NumberCaller ID SpoofingCall WaitingCall Forward - UnconditionalCall Forward on BusyCall Forward on No AnswerCall TransferAnonymous CallBlock Anonymous CallDo Not DisturbCall ReturnRepeat DialingOBi100 & OBi110Powerful Call Routing & Voice Service Features: SIP Support for Voice and Fax Over IP from Internet Telephony Service ProvidersOBiTALK Managed VoIP Network for OBi Endpoint Devices & ApplicationsHigh Quality Voice Encoding Using G.711, G.726, G.729 AlgorithmsRecursive Digit Maps & Associated Call Routing (Outbound, Inbound)-2-

GeneralBrandObihaiBrowse Obihai DevicesManufacturerObihaiHardware DesignerObihai Technology, Inc.Model NameOBi100Release DateMarch 2011MicroprocessorChip VendorObihai SoCWidth of Machine Word32 bitInstruction SetMIPSFXS SLIC (Subscriber Line Integrated Circuit)Ringer SpecificationsRing Frequency: 14Hz – 68HzRing Waveform: Trapezoidal, SinusoidalRing Voltage: 55v – 85vMaximum Ring Load5 REN (Ringer Equivalence Number)FXS (PHONE Port)Configuration SettingsRecursive Digit Map & Associated Outbound Call RoutingOn-Hook Tip Ring Voltage: 30v – 52vOff-Hook Current Max: 15mA – 45mAImpedance: 12 Independent SettingsDTMF Playback Level: -90 dBm – 3dBmCaller ID Method (FSK Bell202, FSK V.23, DTMF FI/SE/DK)Caller ID Trigger (Before / After First Ring, Polarity Reversal)Channel Tx Gain: -12dB – 12dBChannel Rx Gain: -12dB – 12dBSilence Detect SensitivityHook--Flash Time MaxHookFlash Time MinCPC Delay TimeCPC DurationIdle PolarityConnect PolarityManagement – ConfigurationLocal Access InterfaceIVR, Web Page – Password Protected (Admin & User Level Log-in)Remote Access InterfaceSyslog (Multi-Level Granularity), Invokable via SIP Notify, Web, ProvisioningDevice Web Page StandardHTTP v1.1, XML v1.0Remote ProvisioningXML via TFTP or HTTP (TR069 / TR104 Parameter Naming Syntax)Secure Remote ProvisioningSSL via HTTPS , Encrypted XML via HTTP or TFTP – Dedicated User Name & PasswordSecure Remote Firmware UpdateEncrypted Binary File via TFTP or HTTP Dedicated User Name & PasswordCustomizationOBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration **Call History (CDRs)Call Detail Records on OBi Web Page, Export to XMLLED IndicationsPower, Device Status, Upgrade Progress Status, Ethernet Actvty, PHONE StatusRTP StatisticsRTP Transport TypeAudio Codec Type (Tx/Rx)RTP Packetization - ms (Tx/Rx)RTP Packet Count (Tx/Rx)RTP Byte Count (Tx/Rx)Peer Clock Differential Rate - PPMPackets In Jitter BufferPackets Out-Of-OrderPackets InterpolatedPackets Late (Dropped)Packets Lost-3-

Management Configuration – Continued RTP Statistics Cont Packet Loss Rate %Packet Drop Rate %Jitter Buffer Length - msReceived Interarrival Jitter - msDTMF Digits ReceivedJitter Buffer UnderrunsJitter Buffer OverrunsSequence Number DiscontinuitiesSkew Compensation - msSession InformationSIP Session StatusOBiTALK StatusPhone Port StatusPrimary SIP Service Set-Up WizardDedicated Device Web Page for Quick ITSP Account Set-UpSystem Settings Back-Up / RestoreSave & Restore Configuration via XML file to / from a Local FolderSecurityLocal Access InterfaceIVR PasswordRemote Access InterfaceUser Name & Password Access via HTTP, TFTP – HTTPSDevice Web Page StandardHTTP v1.1, XMLv1.0Secure Remote ProvisioningTFTP, HTTP, HTTPSNetwork – Application DetailsData NetworkingMAC Address (IEEE 802.3)UDP (RFC 768)TCP (RFC 793)IP version 4 (RFC 791) – Static IP and DHCP SupportICMP (RFC 792)ARP - Address Resolution ProtocolRTP (RFC 1889, 1890)RTCP (RFC 1889)DHCP Client (RFC 2131)DiffServ (RFC 2475) – Independently Configured: Service, SIP & MediaToS (RFC 791, 1349) – Independently Configured: Service, SIP & MediaVLAN Tagging (802.1p) – Independently Configured: Service, SIP & MediaSNTP (RFC 2030) – Primary & Secondary NTP ServersVoIPSIPv2 (RFC 3261, 3262, 3263, 3264)SIP over UDPSIP over TCPSIP over TCP with TLS2 SIP Service Provider Service Sessions – Concurrent Operation1 OBiTALK Service SessionSIP Proxy Redundancy – Local or DNS Based SVR, Primary & Secondary Fallback ListRestrict Source IP AddressMaximum Number of Sessions – Independent per ServiceTrunk Groups (4)Voice Gateway – Direct Dialing (8)G.711 A-LawG.711 µ-LawG.726 (40/32/24/16)G.729aCodec Pre-selection CodeVoice Processing per SIP Service – TX/RX Audio Gain, Echo CancellationAdjustable Audio Frames per PacketCodec Name AssignmentCodec Profile per SIP SP (2) & OBiTALK ServiceDynamic Audio PayloadPacket Loss ConcealmentJitter Buffer (Adaptive)STUNICE-4-

Network – Application Details Continued VoIP Cont SUBSCRIBE / NOTIFY Framework (RFC 3265)NOTIFY Dialog, Line StatusSUBSCRIBE Message SummaryVoIP NAT InterworkingDATE Header SupportALERT-INFO Header SupportRemote-Party-ID (RPID)P-Asserted-Identity (PAID)RTP Statistics in BYE MessageMedia Loopback SupportTelephonyConfigurable Contact List (Inbound Call Routing)Automatic Attendant (English) with Configurable Answer DelayPIN Access Control to AA (Up to 4 PINs)Recursive Digit Map for Call Routing (AA, Phone, Voice Gateways, Trunk Groups)AA Configurable Outbound Call Routing RuleSIP Service Configurable Inbound Call Routing Rule (2)Direct / Single-Stage Dialing (Route to Voice Gateway)Fax Pass Through (G.711)Modem Pass Through (G.711)In-Band DTMF (G.711)Out of Voice Band DTMF (RFC 2833)Out of Voice Band DTMF (INFO Method)Call Progress Tone GenerationTone Profile per SIP SP and OBiTALK serviceRing Profile per SIP SP and OBiTALK serviceStar Code Profile per SIP SP and OBiTALK serviceFull Duplex AudioG.165, 168 Echo CancelationVAD – Voice Activity DetectionSilence SuppressionComfort Noise GenerationThree Way Conference Calling with Local MixingHook Flash Event SignalingFlash Hook TimerCaller ID – Name & Number per Bellcore, ETSI and DTMFMWI – Message Waiting IndicatorVisual Message Waiting Indication (VMWI)Daylight Savings Time Support – North & South HemispheresCaller ID Enable /DisableCaller ID NumberCaller ID Name (Alphanumeric)Caller ID SpoofingCall WaitingMaximum Session ControlCall Forward - UnconditionalCall Forward on BusyCall Forward on No Answer (Ring Count Configurable)Call Transfer Enable / DisableAnonymous Call BlockAnonymous CallDo Not DisturbCall ReturnRepeat DialingCall Progress TonesConfigurable Call Progress ToneCall Progress Tone Profiles (2)Dial ToneBusy ToneRingback ToneReorder ToneConfirmation ToneHolding ToneSecond Dial ToneStutter Tone-5-

Call Progress Tones Cont Star Code ConfigurationHowling TonePrompt ToneCall Forwarded ToneConference ToneSIT Tones (1-4)Ringing & Call Waiting Tone ConfigurationRing Patterns (10) - ConfigurableCall Waiting Tone Patterns (10) - ConfigurableCall Waiting Tone Pattern Profiles (2)Configurable Start CodesStar Code Profiles (2)RedialCall ReturnActivate Block Caller IDDeactivate Block Caller IDBlock Caller ID OnceUnblock Caller ID OnceActivate Call Forwarding (All Calls)Deactivate Call Forwarding (All Calls)Activate Call Forward on BusyDeactivate Call Forward on BusyActivate Call Forward on No AnswerDeactivate Call Forward on No AnswerActivate Block Anonymous CallsDeactivate Block Anonymous CallsActivate Call WaitingDeactivate Call WaitingActivate Do Not DisturbDeactivate Do Not DisturbActivate Repeat DialDeactivate Repeat DialInterfaces & Indicator LightsInternet (WAN)1 x 10/100BaseT Ethernet Port (802.3)Phone (FXS)1 x RJ-11 FXS Analog Phone PortReset ButtonYes – Located on Bottom of CaseLEDs3 – Power Status, Ethernet Activity, PhoneLED IndicationsPower On, Device Status, Upgrade in Progress Status, Packet RX/TX, Phone PortStatusCertificationsFCC Part 15Yes – Class BA-TickYesCEYesICES-003YesRoHSYesWEEEYesUL/cULYes – Power AdapterEnvironmentalOperating Temperature0º to 45º C (32º to 113º F)Storage Temperature-25º to 85º C (-13º to 185º F)Operating Humidity10% to 90% Non-condensingNon-operating Humidity10% to 90% Non-condensing-6-

Physical AttributesDimensions:(width x depth x height)6.5 x 9.0 x 2.2 centimetres2.6 x 3.5 x 0.9 inchesUnit Weight:200 grams / 7 ouncesShipping Weight312 grams / 12 ounces (Including Power Supply, Cable and Packaging)MountingDesktop MountablePower SupplyTypeUniversal Switching with Fixed US, EU, UK or AU Style Plug Prongs (ModelDependent)Input PowerAC Input: 100 to 240 Volts 0.3A 50-60Hz (26-34 VA)Output PowerDC: 12V 1.0 Amp MaxCarton SpecificationsUnits Per Carton20 UnitsCarton Dimensions(width x depth x height)43.2 x 25.4 x 21.6 centimetres17 x 10 x 8.5 inchesCarton Weight6.4 Kilograms / 14 poundsCartons Per Std. 20 / 40 ft Container1,170 / 2,430 Cartons – Non-palletizedMiscellaneousRequirementsActive Internet ConnectionAnalog Touch Tone PhoneAccess to Internet Via a Switched Ethernet Port on Home or Office Router(Optional) Active Internet Phone Service Subscription with All Required SIPCredentials to Make & Receive CallsDocumentationQuick Start / Installation GuideUser / Administrative GuideImplementation Guide for Service Providers **Package ContentsOBi100 Voice Service Bridge and Telephone AdapterPower Adapter1 x RJ-45 Ethernet Cable (80 inches / 203 centimeters)Quick Start / Installation GuideWarranty1-Year Hardware (Limited)Engineering & Design LocationCalifornia, USAHST Code8517.62.00Data Sheet StateAll content subject to change.This data sheet is not a warranty.Data Sheet Version131217.100.2** For Service Providers Only Available in Future with Firmware UpdateiPhone, iPad and iPod touch are trademarkes of Apple Computer, Inc.Android is a trademark of Google, Inc.OBi, OBiAPP, OBiON and OBiTALK are trademarks of Obihai Technology, Inc.All other trademarks metioned in this document are property of their respective owners.This document is provided by Obihai Technology for planning purposes only. No warranty is implied.Do Not Use For Emergency Service CallsObihai Technology does not warrant the availability or quality of the OBiTALK network. Furthermore, ObihaiTechnology will not be liable to you or any third party for any costs or damages arising directly and or indirectlyfrom the use of thisproduct’s hardware & software including without limits any damage, or for any loss whatsoever. 2010-2013 Obihai Technology, Inc. All rights reserved.-7-

OBi100 VoIP Telephone Adapter & Voice Services Bridge with Support for Two (2) SIP and OBiTALK VoIP Services . started, all you need is a phone, power and a connection to the Internet. . OBiTALK Managed VoIP Network for OBi Endpoint Devices & Applications High Quality Voice Encoding Using G.711, G.726, G.729 Algorithms .