Transcription
Tech Spec5000 Series Rotors5000, Plus, PRS, SAMBuilt from top to bottom with the contractorin mind, the Rain Bird 5000 Series productline is the durable, reliable rotor for residential and commercial applications. Its RainCurtain Nozzle set includes 12 nozzles:8 standard angle nozzles and 4 low anglenozzles that ensure you always have the rightnozzle in hand for the project.Standard Features Thicker rubber cover Self Flushing Arc Adjustment Port: as theriser stem pops-up and retracts a jet ofwater cleans out the arc adjustment slot Slip Clutch: quickly set the left edge of the5004 rotor (dry set only) Self-Flushing tapered stem design andintegrated triple-blade multi-functionwiper seal protect internals from debris Positive riser stem retraction Heavy duty case 40- 360 arc rotation and reversing fullcircle rotation in one. (A non-reversing fullcircle only unit is also available) Top-adjust arc adjustment requiring only aflat-blade screwdriver Tree of nozzles including 8 Rain Curtain(25 trajectory) and 4 low angle (10 trajectory) provides 25’ to 50’ (7.6 to 15.2m)distance of throw Rain Curtain nozzles feature:-- Large droplets for superior windresistance-- Effective close-in watering-- Even distribution over the entire radius Optional pre-installed Rain Curtain nozzles Optional Matched Precipitation Rate (MPR)nozzles Optimized for mid-distance residential andlight commercial applications True 4” (10 cm) pop-up (measured from thecase cover to the nozzle) Five-year trade warrantyOperating Range Precipitation rate: 0.20 to 1.01 inches perhour (5 to 26 mm/h) Radius: 25’ to 50’ (7.6 to 15.2 m) Radius may be reduced up to 25% withradius reduction screw Pressure: 25 to 65 psi (1.7 to 4.5 bar) Flow Rate: 0.76 to 9.63 gpm (3.0 to36.6 l/m)Specifications 3/4” (20/27) NPT female bottomthreaded inlet Reversing full and part-circle adjustment40 – 360 Full-circle only adjustment 360 12”6”4"ShrubDimensions Pop-up height: Shrub; 4” (10.2 cm);6” (15.2 cm); 12” (30.5 cm) Overall body height: Shrub: 7 3/4” (19.7cm)4”: 7 3/8” (18.5 cm); 6”: 9 5/8” (24.5 cm);12”: 16 7/8” (42.9 cm) Exposed surface diameter: 1 5/8” (4.1 cm)Note: Pop-up height measured from the cover to thenozzle. Overall body height is measured popped downHow To Specify5004-S- -PC-SAM-R-NP-SSOptionsSAMR: PRSNP: Non-potablecoverRotation“PC” for 40-360 degrees“FC” for 360 degree onlyModelPlusModelShrubModelStainless steelModel5004: 4" pop-up5006: 6” pop-up5012: 12” pop-upNote: Certain specifications not available forsome rotor series.
TheBird 5000 Series Customize Your Rotor in Three Simple Steps5000 RainSeries RotorsSteStep 2. Add FeaturesOptional FeaturesPlus (PL)PRS (R)The Green TopSAM50505050505050FLOW SHUT OFFPRESSURE REGULATIONCHECK VALVEHo5OnOFFONWithout PRSPLUSOffBenefits Turn the rotor on/off at the head for easierTurn therotor on/off at the head formaintenance.easier maintenance. Flush zone and nozzle the rotor withoutFlush zoneandnozzlethe rotorgoingbackand forthto awithoutgoing back and forth to avalveor controller.valve or controller. Troubleshootfor leaks by turning offalltheheadsinthatleakszone.by turning Troubleshoot foroff all the heads in that zone.Additional Features Stainless Steel (SS) Non-potable (NP)Without SAMSAMPRSWith PRSWith SAMM50BENEFITSPRS with Flow Optimizer technologyPRS with Flow Optimizer technology Conserve water and manage flow at each headConservewater andmanageflow atby regulatingpressureto preciselyeachheadbyregulatingpressureto45 psi.precisely 45 psi. Eliminate wasteful misting and fogging.Eliminatemistingand fogging. ntirezone. Ensure even distribution uniformity Prevent low head drainage. Eliminate puddling or water stains on Eliminateor water stainshardscapepuddlingareas.hardscapeareas. onContainwater inlateral lines forsmootherwaterstart ups. Containin lateral lines for Prevent low head drainage.smoother start ups. Sacross the entire zone. NModelsPlusSAMPRS5004-PC5004- -PC 5004- -SAM 5004-PC-Rwww.rainbird.comAD 5004- -PC-SAM 5004- -PC-R 5004- -PC-SAM-R
5000 Series Rotors5000 Series Std. Angle Rain Curtain Nozzle PerformancensPressureNozzleRadius Flow Precip 09.630.740.86Precipitation rates based on half-circle operationn Square spacing based on 50% diameter of throws Triangular spacing based on 50% diameter of throwPerformance data collected in zero wind conditionsPerformance data derived from tests that conform with ASAE Standards; ASAE S398.1.5000 Series Std. Angle Nozzle wm3 2www.rainbird.com
5000 Series Rotors5000 Series Low Angle Nozzle PerformancePressureNozzleRadiuspsift.251.0 LA251.5 LA272.0 LA293.0 LA29351.0 LA281.5 LA302.0 LA313.0 LA33451.0 LA291.5 LA312.0 LA323.0 LA35551.0 LA291.5 LA312.0 LA333.0 LA36651.0 LA291.5 LA312.0 LA333.0 0.270.350.400.510.290.380.430.555000 Series Low Angle Nozzle 64Precipitation rates based on half-circle operationn Square spacing based on 50% diameter of throws Triangular spacing based on 50% diameter of throwPerformance data collected in zero wind conditionsPerformance data derived from tests that conform with ASAE Standards; ASAE S398.1.PressureNozzleRadiusbarm1.71.0 LA7.601.5 LA8.202.0 LA8.803.0 LA8.802.01.0 LA8.001.5 LA8.602.0 LA9.103.0 LA9.302.51.0 LA8.601.5 LA9.202.0 LA9.503.0 LA10.103.01.0 LA8.801.5 LA9.402.0 LA9.703.0 LA10.603.51.0 LA8.801.5 LA9.402.0 LA9.903.0 LA10.804.01.0 LA8.801.5 LA9.402.0 LA10.103.0 LA11.004.51.0 LA8.801.5 LA9.402.0 LA10.103.0 LA11.00Flowm3 4710111581112158111316www.rainbird.com
5000 Series Rotors5000 Series with PRS Std. Angle Rain Curtain Nozzle 0456.0468.04755 – ipitation rates based on half-circle operationn Square spacing based on 50% diameter of throws Triangular spacing based on 50% diameter of throwPerformance data collected in zero wind conditionsPerformance data derived from tests that conform with ASAE Standards; ASAE S398.1.5000 Series with PRS Std. Angle Rain Curtain Nozzle Performance .56.013.98.014.13.5 – .98.014.1Flowm3 21www.rainbird.com
5000 Series Rotors5000 Series with PRS PRS Low Angle Nozzle PerformancePressureNozzleRadiuspsift.251.0 LA251.5 LA272.0 LA293.0 LA29351.0 LA281.5 LA302.0 LA313.0 LA33451.0 LA291.5 LA312.0 LA323.0 LA3555 – 751.0 LA291.5 LA312.0 LA323.0 440.560.290.380.450.58Precipitation rates based on half-circle operationn Square spacing based on 50% diameter of throws Triangular spacing based on 50% diameter of throwPerformance data collected in zero wind conditions5000 Series with PRS PRS Low Angle Nozzle Performance METRICPressureNozzleRadiusbarm1.71.0 LA7.61.5 LA8.22.0 LA8.83.0 LA8.82.01.0 LA8.01.5 LA8.62.0 LA9.13.0 LA9.32.51.0 LA8.61.5 LA9.22.0 LA9.53.0 LA10.13.01.0 LA8.81.5 LA9.42.0 LA9.73.0 LA10.63.5 – 5.21.0 LA8.81.5 LA9.42.0 LA9.73.0 LA10.6Flowm3 5Performance data derived from tests that conform with ASAE Standards; ASAE S398.1.Flow Rate vs. Inlet Pressure – Rain Curtain Nozzles12.011.010.08.0 RC - no PRSFlow Rate (gpm)9.08.0 RC - with PRS8.07.06.05.0 RC - no PRS5.0 RC - with PRS5.04.03.0 RC - no PRS3.0 RC - with PRS3.02.0 RC - no PRS2.02.0 RC - with PRS1.00.015202530354045505560657075Inlet Pressure (psi)www.rainbird.com
5000 Plus Series RotorTechnical Specification5000 Plus Series Full and ReversingFull/Part Circle SprinklerThe full and/or part circle sprinkler shall be asingle-stream, water-lubricated, gear-drive typecapable of covering a foot (xx meter) atpounds per square inch (psi) or (bar) with adischarge rate of gallons per minute ( gpm)( m3/h). The sprinkler shall have a flow shut-offdevice that is integrated into the flow path of therotor as well as adjustable arc coverage of 40 to360 degrees. Arc adjustment can be performedwith or without the sprinkler in operation and shallrequire only a flat-blade screwdriver.close-in watering. The angle of trajectory shallbe 25 degrees for the Rain Curtain nozzles and 10degrees for the low angle nozzles. The sprinklershall come with a stainless steel adjusting screwcapable of reducing the radius up to 25%.The sprinkler shall be as manufactured by Rain BirdCorporation, Glendora, California.Optional Feature Specification5000 Plus Series SAM, Full andReversing Full/Part CircleSprinkler SAM unitThe sprinkler shall have a smoothed flow pathentrance to enhance the flow characteristics of therotor. In addition, the sprinkler shall feature a flowpath to nozzle bore transition radius to minimizepressure loss and assure peak nozzle radius isachieved.When so indicated on the design, the sprinklershall have a spring-loaded Seal-A-Matic (SAM)device in the base of the case. The device shallhold back at least 7’ (2, 13m) of elevation change toprevent puddling, run-off and erosion caused bylow-head drainage.The sprinkler shall have a pressure activated, multifunction wiper seal that positively seals against thepop-up stem to keep debris out of the rotor and toclean debris from the pop-up stem as it retracts.5000 Plus Series Full and ReversingFull/Part Circle Non-PotableThis wiper seal shall prevent sprinkler from stickingup, and be capable of sealing the sprinkler cap tosprinkler body under normal operating pressures.The sprinkler shall have a screen installed in thepop-up stem to filter inlet water, protect the drivefrom clogging and simplify its removal for cleaningand flushing of the system. It shall have a 3 4”(FNPT) bottom inlet.The sprinkler shall have a standard green rubbercover and a strong stainless steel retract spring forpositive pop down. Pop-up height as measuredfrom the top of the cap, at normal installation, tothe middle of the nozzle orifice shall be inchesor cm.The rotor’s overall height shall be inches( cm), with an exposed surface diameter of15 8”
Step 1. Choose a Body Step 2. Add Features Step 3. Order Even coverage with Rain Curtain technology Easier adjustment with slip clutch No stick-ups with tapered self cleaning stem Self-fl ushing arc adjustment port Worry free 5-year warranty Stainless Steel (SS) Non-potable (NP) FLOW SHUT OFF On O Without PRS With PRS PRS (R) PRESSURE REGULATION Without SAM .
