ID-00403 - Sheet1 - Celera Motion PDF Free Download

1y ago

17 Views

1 Downloads

1.38 MB

9 Pages

Report/dmca

Download PDF

Transcription

876THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF GSI Group Corporation AND SHALLNOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALEOF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM GSI Group Corporation.4532DIRECTION "A"A3.2X0.5 D1.78 INITIALREVISED RISER THICKNESS, FLY HEIGHT CHANGED. SEE ECOREVISED FLY HEIGHT/Z HEIGHT. ADDED TOLERANCE TABLEFOR TAPE SCALE LENGTHSREVISED LAYOUT, UPDATED VIEWS. NO DIM CHANGES.REVISED Z HEIGHT TO 2.51 WAS 2.275, SEE ECOA2923RELEASED TO /10/15PD1/29/16SB3/29/16SB2.501.70(YAW θz TOLERANCE 2º)D1REVISIONSDPOSITION TRACK10.41 0.15A6.00D.05/100BC(PITCH θy TOLERANCE 1º)1.02 0.10.003/103.7CC0.20SCALE THICKNESSC0.23 C0.493READHEADFLY HEIGHT3.22.51 0.15ATAPE SCALEMOUNTING SURFACE0.02 C(ROLL θx TOLERANCE 1º)5.66STATUS LEDBB7.4OPTICAL CL11.405.1NOTES:13.001. RECOMMENDED HARDWARE: 0-80 OR M1.6 (MAX HEAD SIZE NOT TO EXCEED 2.94mm).MAX. TORQUE: 3 in/lbsUNLESS OTHERWISE SPECIFIEDA2. RECOMMENDED ENCODER MOUNTING PLATE THICKNESS:MINIMUM - 4 SCREW THREADSMAXIMUM - ALLOW CLEARANCE TO SCALE AND SCALE MOUNTING HARDWARE (BENCHING SURFACES, CLAMPS, HUBS, ETC.)BENCHING EDGES: IF BENCHING THE ENCODER, AN EDGE OR PINS CAN BE USED ALONG DATUM A ONLY.BENCHING EDGE OR PINS MUST BE A MINIMUM OF 1.50mm IN HEIGHT FROM MOUNTING SURFACE.3.17MOUNTING SURFACETOLERANCES ARE:DECIMALS:ANGULAR:.XX[.X] .01[.25]30 MIN.XXX[.XX] .005[.13]7654MicroE4/16/2015ENGRG.PAUL. R3/8/2016MFG ENGJAY. GQAMATTHEW. R(GSI Group Corporation)125 Middlesex Tpk.Bedford, MA 01730DESCRIPTION:3/8/2016INTERFACE, ENCODER, 20um,OPTIRA, PILT TAPE SCALE3/8/20163. WHEN PILT TAPE SCALE MOVES IN DIRECTION "A" WITH RESPECT TO A STATIONARY READHEAD, OUTPUT SIGNAL A (PIN 1)LEADS OUTPUT SIGNAL B (PIN 3).8ADATEAPPROVALSALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. DRAWNS.BUTURLIADIM APPLY AFTER PROCESSINGINTERPRET ALL GEOMETRIC TOLS.CHECKEDPER ANSI Y14.5M-1982REV.SIZE DWG. NO.BSCALE:32ID-00400A3rd ANGLEPROJECTIONCAD FILE:1SHEET1 OF 3

87456320.92PCB STACKINGHEIGHT1(1.8)FLIP TOPACTUATORDD0.8COMPONENTHEIGHT1.CPIN 12C2.PIN 11PIN 1PIN 2PIN 1PinNumber123456789101112BASignalA-quad-BAnalogA AB BINDEX INDEXALARMCALPWRGNDN/CN/CPinNumberSIN SINCOS COSINDEX AnalogA AB BINDEX INDEXALARMCALPWRGNDSIN SINCOS COSINDEX INDEXALARMCALPWRGNDBANOTES:MicroE(GSI Group Corporation)125 Middlesex Tpk.Bedford, MA 017301. CONNECTOR, HEADER, BOARD TO BOARD, 12 CONTACTSMOLEX# 501594-1211 (MATING CONNECTOR MOLEX# 501591-1211).REFER TO MANUFACTURING SPECIFICATION SHEET ON STACKING HEIGHTS AND REQUIREMENTS.DESCRIPTION:INTERFACE, ENCODER, 20um,OPTIRA, PILT TAPE SCALE2. CONNECTOR, ZIF, FFC/FPC, FLIP TOP ACTUATOR, HORIZONTAL MOUNTING, 0.5mm PITCH, 10 CONTACTSHIROSE ELECTRIC CO# FH33-10S-0.5SH(10). REFER TO MANUFACTURER SPECIFICATION SHEET FOR FPC/FFC CONSTRUCTION.876543REV.SIZE DWG. NO.BSCALE:2ID-00400A3rd ANGLEPROJECTIONCAD FILE:1SHEET2 OF 3

87456321PILT SCALE LENGTH (ML 10 mm)DDMEASURING LENGTH (ML)D(ML/2)5.005.006.00CCINDEX TRACKPOSITION TRACKBBOptira Tape Scale ToleranceALength10mm - 500mm501mm - 1000mm1001mm - 5000mm 5000mmNOTES:1. PILT CAN BE SUPPLIED IN INDIVIDUAL PIECES OR IN CONTINUOUS FORM.2. FOR ALTERNATE INDEX LOCATIONS, MULTIPLE INDEXES OR ADDITIONAL FEATURES;CONTACT MICROE.876AMicroETolerance-0 / 2mm-0 / 5mm-0 / 13mm-0 / 15mm(GSI Group Corporation)125 Middlesex Tpk.Bedford, MA 01730DESCRIPTION:INTERFACE, ENCODER, 20um,OPTIRA, PILT TAPE SCALEBSCALE:543REV.SIZE DWG. NO.2ID-00400A3rd ANGLEPROJECTIONCAD FILE:1SHEET3 OF 3

84576THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF Novanta Corporation AND SHALLNOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALEOF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM Novanta ALAPPROVEDSBB13.003.75.66 0.10D2REVISIONSBA30.48READHEADFLY HEIGHT2.508.00A5.12X 1.70D3.30 0.050HUB THICKNESSDIRECTION "A"3.3.17MOUNTINGSURFACE1.00 0.03HUB RELIEF11.4013.43 0.1016.50SCALE O.D.C2X 1.78THRU ALL7.4C( 12.73)OPTICAL DIAMETEROPTICAL CL10.00HUB O.D.MACHINE AXIS1.02 0.10EPCB THICKNESS5.66POSITION TRACK(2,000 COUNTS)3X M1.4X0.3 - 6HTHRU ALLBEQ. SPACED ONA 4.10 B.C. 0.0102.000 0.000SCALE PATTERNSURFACEBHUB I.D.2.307 0.1502.29 0.05SCALE THICKNESSSTATUS LEDNOTES:1. RECOMMENDED HARDWARE: 0-80 OR M1.6 (MAX HEAD SIZENOT TO EXCEED 2.94mm).MAX. TORQUE: 3 in/lbsA2. RECOMMENDED ENCODER MOUNTING PLATE THICKNESS:MINIMUM - 4 SCREW THREADSMAXIMUM - ALLOW CLEARANCE TO SCALE AND SCALE MOUNTINGHARDWARE (BENCHING SURFACES, CLAMPS, HUBS, ETC.)BENCHING EDGES: IF BENCHING THE ENCODER, AN EDGE OR PINS CAN BEUSED ALONG DATUM A ONLY. BENCHING EDGE OR PINS MUST BE AMINIMUM OF 1.50mm IN HEIGHT FROM MOUNTING SURFACE.UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN MILLIMETERS.DIM APPLY AFTER PROCESSINGINTERPRET ALL GEOMETRIC TOLS.PER ANSI Y14.5M-1982TOLERANCES ARE:DECIMALS:ANGULAR:.XX .25 30 MIN.XXX ERFACE, OPTIRA SERIES ENCODERS,20um ROTARY GLASS SCALES W/HUBS(PIRG1707-HM)MFG ENGQA3. WHEN ROTARY GLASS SCALE MOVES IN DIRECTION "A" WITH RESPECT TOA STATIONARY READHEAD, OUTPUT SIGNAL A (PIN 1) LEADS OUTPUTSIGNAL B (PIN 3).876MOTION(Novanta Corporation)125 Middlesex Tpk.Bedford, MA 01730CHECKEDENGRG.SIZE DWG. 31CAD FILE:13rd ANGLEPROJECTIONSHEET1 OF 6

84576THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF Novanta Corporation AND SHALLNOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALEOF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM Novanta Corporation.3.70.493READHEADFLY HEIGHT5.66 0.10D21BBA313.002.508.002X 1.70A5.1D57.00SCALE O.D.DIRECTION "A"3.17MOUNTINGSURFACE2X 1.78THRU ALL3.( 52.15)OPTICAL DIAMETER11.407.433.14 0.101.02 0.10PCB THICKNESSOPTICAL CL5.66CC40.00HUB O.D.MACHINE AXISESTATUS LEDBBPOSITION TRACK(8,192 COUNTS) 0.01510.00 0.000HUB I.D.2.90 THRU ALL5.202.60EQ. SPACED ON A17.10 B.C.SCALE PATTERNSURFACE3XA3XM3X0.5 - 6H THRU ALLEQ. SPACED ON A17.10 B.C.4.80 0.050HUB THICKNESS2.00 0.03HUB RELIEF2.307 0.1502.29 0.05SCALE THICKNESSTOLERANCES ARE:DECIMALS:ANGULAR:.XX .25 30 MIN.XXX .13MOTION(Novanta Corporation)125 Middlesex Tpk.Bedford, MA 01730DESCRIPTION:INTERFACE, OPTIRA SERIES ENCODERS,20um ROTARY GLASS SCALES W/HUBS(PIRG5725-HQ)SIZE DWG. NO.BSCALE:8765432ACeleraUNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN MILLIMETERS.DIM APPLY AFTER PROCESSINGINTERPRET ALL GEOMETRIC TOLS.PER ANSI Y14.5M-1982REV.ID-00403113rd ANGLEPROJECTIONSHEET4 OF 6

A45876THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF Novanta Corporation AND SHALLNOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALEOF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM Novanta Corporation.31B3.7B5.66 0.10D2110.00SCALE O.D.DIRECTION "A"( 104.30)OPTICAL DIAMETER3.13.002.500.49READHEADFLY HEIGHT8.002X 1.70A5.1D3.17MOUNTINGSURFACE2X 1.78THRU ALL11.401.02 0.10PCB THICKNESS6.50HUB THICKNESS7.459.22 0.10OPTICAL CL5.66CC75.00HUB O.D.BBSTATUS LEDPOSITION TRACK(16,384 COUNTS) 0.02125.000 0.000MACHINE AXISE3.50 0.03HUB RELIEFHUB I.D.SCALE PATTERNSURFACEA3X4.50 THRU ALL8.004.10EQ. SPACED ON A37.50 B.C.3X M5X0.8 - 6H THRU ALLEQ. SPACED ON A37.50 B.C.TOLERANCES ARE:DECIMALS:ANGULAR:.XX .25 30 MIN.XXX .132.307 0.1502.29 0.05SCALE THICKNESSMOTION(Novanta Corporation)125 Middlesex Tpk.Bedford, MA 01730DESCRIPTION:INTERFACE, OPTIRA SERIES ENCODERS,20um ROTARY GLASS SCALES W/HUBS(PIRG10851-HR)SIZE DWG. NO.BSCALE:8765432ACeleraUNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN MILLIMETERS.DIM APPLY AFTER PROCESSINGINTERPRET ALL GEOMETRIC TOLS.PER ANSI Y14.5M-1982REV.ID-00403113rd ANGLEPROJECTIONSHEET5 OF 6

876THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF Novanta Corporation AND SHALLNOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALEOF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM Novanta Corporation.45321(1.8)FLIP TOPACTUATOR0.92PCB STACKINGHEIGHTDDC0.8COMPONENTHEIGHT1.PIN 12CPIN 11PIN 22.PIN 1PIN BAnalogA A‐B B‐INDEX INDEX‐ALARMCALPWRGNDN/CN/CPinNumberSIN SIN‐COS COS‐INDEX uad‐BAnalogA A‐B B‐INDEX INDEX‐ALARMCALPWRGNDBSIN SIN‐COS COS‐INDEX INDEX‐ALARMCALPWRGNDMOTION1. CONNECTOR, HEADER, BOARD TO BOARD, 12 CONTACTSMOLEX# 501594-1211 (MATING CONNECTOR MOLEX# 501591-1211).REFER TO MANUFACTURING SPECIFICATION SHEET ON STACKING HEIGHTS AND REQUIREMENTS.(Novanta Corporation)125 Middlesex Tpk.Bedford, MA 01730DESCRIPTION:INTERFACE, OPTIRA SERIES ENCODERS,20um ROTARY GLASS SCALES w/HUBS(OUTPUTS)2. CONNECTOR, ZIF, FFC/FPC, FLIP TOP ACTUATOR, HORIZONTAL MOUNTING, 0.5mm PITCH, 10 CONTACTSHIROSE ELECTRIC CO# FH33-10S-0.5SH(10). REFER TO MANUFACTURER SPECIFICATION SHEET FOR FPC/FFC CONSTRUCTION.8765ACelera43SIZE DWG. NO.BSCALE:2REV.ID-00403113rd ANGLEPROJECTIONSHEET6 OF 6

per ansi y14.5m-1982 interpret all geometric tols. projection dim apply after processing.xx[.x] .01[.25] 30 min. 5 2907 revised z height to 2.51 was 2.275, see eco 3 2842 revised fly height/z height. added tolerance table 4 2862 revised layout, updated views. no dim changes. 6/2/15 pd