Transcription
(270mm)19.0"(482mm)OSQ Series3.1"(79mm)OSQ LED Area/Flood Luminaire – LargeProduct DescriptionNEMA PhotocellReceptacle location(ordered as an option)DA MountThe OSQ Area/Flood luminaire blends extreme optical control, advanced thermal managementand modern, clean aesthetics. Built to last, the housing is rugged cast aluminum with an integral,weathertight LED driver compartment. Versatile mounting configurations offer simple installation.Its slim, low-profile design minimizes wind load requirements and blends seamlessly into thesite providing even, quality illumination. ‘S’ Input power designator is a suitable upgrade for HIDapplications up to 750 Watts.Applications: Parking lots, walkways, campuses, auto dealerships, office complexes, and 9.0"(482mm)Performance SummaryNanoOptic Precision Delivery Grid optic3.1"(79mm)Made in the U.S.A. of U.S. and imported partsNEMA PhotocellReceptacle location(ordered as an option)CRI: Minimum 70 CRI (4000K & 5700K); 80 CRI (3000K)CCT: 3000K ( /- 300K), 4000K ( /- 300K), 5700K ( /- 500K)Limited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard finish†3.8"(97mm)See www.cree.com/lighting/products/warranty for warranty terms4.8"(122mm)AA ht ShieldOSQ-BLSLF – Front facing optics10.6"(270mm)OSQ-BLSLR – Rotated optics19.0"(482mm)3.1"(79mm)NEMA PhotocellReceptacle location(ordered as an option)Ordering InformationFully assembled luminaire is composed of two components that must be ordered separately:Example: Mount: OSQ-AA-SV Luminaire: OSQ-A-NM-2ME-S-40K-UL-SV3.8"(97mm)Mount (Luminaire must be ordered separately)OSQOSQ-AA Adjustable ArmOSQ-DA Direct ArmColor Options:SV SilverBK BlackBZ BronzeWH White28.5 lbs. (13kg)Luminaire (Mount must be ordered No Mount2ME*Type IIMedium3ME*Type IIIMedium4ME*Type IVMedium5METype VMedium5SHType VShortWSNWideSign15D15 Flood25D25 Flood40D40 Flood60D60 onsDIM 0-10V Dimming-- Control by others-- Refer to Dimming spec sheet for details-- Can't exceed wattage of specified input powerdesignator3.8"FFuse(97mm)-- When code dictates fusing, use time delay fuseML Multi-Level-- Refer to ML spec sheet for details-- High: 100%, Low: 30%-- Intended for downlight applications at 0 tiltPML Programmable Multi-Level, 20-40' MountingHeight-- Refer to PML spec sheet for details-- Intended for downlight applications at 0 tiltNEMA PhotocellReceptaclelocationPML2 Programmable Multi-Level,10-30' Mounting(ordered as an option)Height-- Refer to PML spec sheet for details-- Intended for downlight applications at 0 tiltQ9 Field Adjustable Output4.8"-- Refer to Field Adjustable Output spec(122mm)sheetfor detailsRNEMA Photocell Receptacle-- Intended for downlight applications withmaximum 45 tilt-- Photocell by othersRL Rotate Left-- LED and optic are rotated to the leftRR Rotate Right-- LED and optic are rotated to the right* Available with Backlight Shield when ordered with field-installed accessory (see table above)Rev. Date: V7 11/19/2015US: www.cree.com/lightingT (800) 236-6800 F (262) 504-5415Canada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – LargeProduct SpecificationsElectrical Data*CONSTRUCTION & MATERIALS Slim, low profile design minimizes wind load requirementsTotal Current Luminaire housing is rugged die cast aluminum with an integral, weathertight LEDdriver compartment and high performance heat sink Convenient interlocking mounting method on direct arm mount. Mounting adaptoris rugged die cast aluminum and mounts to 3-6" (76-152mm) square or round pole,secured by two 5/16-18 UNC bolts spaced on 2" (51mm) centers Mounting for the adjustable arm mount adaptor is rugged die cast aluminum andmounts to 2" (51mm) IP, 2.375" (60mm) O.D. tenonInput PowerDesignatorSystem .990.850.650.47* Electrical data at 25 C (77 F). Actual wattage may differ by /- 10% when operating between 120-480V /-10% Adjustable arm mount can be adjusted 180 in 2.5 increments Designed for uplight and downlight applications Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with anultra-durable powder topcoat, providing excellent resistance to corrosion, ultravioletdegradation and abrasion. Silver, bronze, black, and white are availableRecommended OSQ Series Lumen Maintenance Factors (LMF)1 Weight: 28.5 lbs. (13kg)OpticInitialLMF25K hrProjected2LMF50K hrProjected2LMF75K hrProjected/Calculated2,3LMF100K hrCalculated3LMF2ME, 3ME, 4ME1.040.990.930.890.845ME, 5SH, 15D, 25D,40D, 60D, WSN1.050.940.860.800.742ME, 3ME, 4ME1.030.980.930.880.835ME, 5SH, 15D, 25D,40D, 60D, WSN1.040.930.860.790.732ME, 3ME, 4ME1.020.970.920.870.825ME, 5SH, 15D, 25D,40D, 60D, WSN1.030.920.850.780.722ME, 3ME, 4ME1.010.960.910.860.82 Certified to ANSI C136.31-2001, 3G bridge and overpass vibration standards5ME, 5SH, 15D, 25D,40D, 60D, WSN1.010.900.830.770.71 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.22ME, 3ME, 4ME1.000.950.900.850.815ME, 5SH, 15D, 25D,40D, 60D, WSN1.000.890.820.760.70ELECTRICAL SYSTEM Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 driversAmbient Power Factor: 0.9 at full load Total Harmonic Distortion: 20% at full load5 C (41 F) Integral 10kV surge suppression protection standard To address inrush current, slow blow fuse or type C/D breaker should be used 10V Source Current: 0.15mA10 C (50 F)REGULATORY & VOLUNTARY QUALIFICATIONS cULus Listed Suitable for wet locations15 C (59 F) Enclosure rated IP66 per IEC 60529 when ordered without R option Consult factory for CE Certified products20 C (68 F)25 C (77 F) Meets FCC Part 15 standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambientsalt fog conditions as defined in ASTM Standard B 117 Meets Buy American requirements within ARRA DLC qualified when ordered with 30K (5ME, 5SH optics), or 40K and 57K (2ME, 3ME,4ME, 5ME, 5SH, 15D, 25D, 40D, 60D optics). Please refer towww.designlights.org/QPL for most current informationLumen maintenance values at 25 C (77 F) are calculated per TM-21 based on LM-80 data and in-situ luminaire testingIn accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times(6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)3In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 totaltest duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)12 Dark Sky Friendly, IDA approved. Please refer to www.darksky.org/ for most currentinformation RoHS compliant. Consult factory for additional detailsUS: www.cree.com/lightingT (800) 236-6800 F (262) 504-5415Canada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your projectconsult: ries2ME150 17651100'80'150 80'60'40'20'0'20'60'13238120 120 882540'.120'90 90 20'60'80'18.3.2.516.1250mCURB LINE6.140'60 30 150 1141924.4 18.3 12.26.10m6.180'60'40'20'0'20'60'120 720924.424.4 30.540'.120'60'80'100'24.418.3.2.516.1250mCURB LINE6.140'12.260'60 60 30 18,182B3 U0 G23000KInputPowerDesignator24.4 18.3 DeliveredLumens*BUGRatings**Per TM15-1121,696B3 U0 G323,179B3 U0 G324.424.4 Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-1115,584B2 U0 G218,597B3 U0 G219,867B3 U0 G218.380'30.5Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.RESTL Test Report #: PL03642-003OSQ-A-**-2ME-J-40K-UL w/OSQ-BLSMFInitial Delivered Lumens: 14,643InitialDeliveredLumens*5700KBUGRatings**Per TM15-11Type II Medium w/BLS Distribution12.20'90 40'S4000KBUGRatings**Per TM15-11* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tilt60 20'360590 18.3Position of vertical planeof maximum candlepower.100'80'150 120 12.2OSQ-A-**-2ME-S-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 21,696Initial FC at lepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.RESTL Test Report #: PL03403-001OSQ-A-**-2ME-S-40K-ULInitial Delivered Lumens: 21,329Type II Medium Distribution12.260'60 100'24.412.20'441340'60 * Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tiltPosition of vertical planeof maximum candlepower.OSQ-A-**-2ME-S-40K-UL w/OSQ-BLSLFMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 18,597Initial FC at grade3ME150 15654140' 120' 100' 80' 60' 40' 20' 0' 20' 40' 60' 80' 100' 120' 140'100'30.5150 80'11740120 120 782718.312.20'20'90 90 24.440'20'391360 60'.1 .2.51Type III Medium Distribution3000K6.120mCURB itialDeliveredLumens*17,996B3 U0 G330.5100'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.760 60 30 12597OSQ-A-**-3ME-S-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 21,475Initial FC at grade140' 120' 100' 80' 60' 40' 20' 0' 20' 40' 60' 80' 100' 120' 140'100'30.5150 80'9448120 60'120 629918.3.20'20'90 12.2.5126.150mCURB LINE6.160'18.380'24.430.5100'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.760 60 Position of vertical planeof maximum candlepower.30 Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.RESTL Test Report #: PL03642-001OSQ-A-**-3ME-J-40K-UL w/OSQ-BLSMFInitial Delivered Lumens: 14,229US: UGRatings**Per TM15-1121,475B3 U0 G322,942B3 U0 G3Type III Medium w/BLS Distribution24.460 .120'214990 40'5700KBUGRatings**Per TM15-11* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tiltCandlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.RESTL Test Report #: PL03439-001OSQ-A-**-3ME-S-40K-ULInitial Delivered Lumens: 21,013150 SPosition of vertical planeof maximum candlepower.4000KBUGRatings**Per r TM15-1115,399B2 U0 G35700KInitialDeliveredLumens*BUGRatings**Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-1118,375B2 U0 G319,631B2 U0 G3* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tiltOSQ-A-**-3ME-S-40K-UL w/OSQ-BLSLFMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 18,375Initial FC at gradeT (800) 236-6800 F (262) 504-5415Canada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your projectconsult: ries4ME150 17106120' 100' 80' 60' 40' 20'120'150 12830120 120 855380'90 60 60 .2 .5150 6.10mCURB LINE6.140'12.260'18.324.480'36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6Position of vertical planeof maximum candlepower.14847150 120' 100' 80' 60' 40' 20'120'0' 20' 40' 60'45 100'120 80'120 7423.160'.520'112.26.10mCURB LINE6.140'12.260'18.3Position of vertical planeof maximum candlepower.Candlepower Trace: Vertical plane throughhorizontal angle of maximum **Per TM15-1117,811B3 U0 G35700KInitialDeliveredLumens*BUGRatings**Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-1121,253B3 U0 G322,705B3 U0 G3Type IV Medium w/BLS Distribution3000K18.380'24.436.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.660 RESTL Test Report #: PL03642-002OSQ-A-**-4ME-J-40K-UL w/OSQ-BLSMFInitial Delivered Lumens: 13,64730.50'90 60 80' 100' 120'36.6220'90 S24.4.240'37123000KInputPowerDesignator* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tiltOSQ-A-**-4ME-S-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 21,253Initial FC at grade1113530 12.2120'20'Type IV Medium Distribution18.3Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.RESTL Test Report #: PL03402-001OSQ-A-**-4ME-S-40K-ULInitial Delivered Lumens: 20,83030.524.4.160'20'90 80' 100' 120'36.645 40'427730 0' 20' 40' 60'100'OSQ-A-**-4ME-S-40K-UL w/OSQ-BLSLFMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 18,154Initial FC at edLumens*BUGRatings**Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-1115,213B2 U0 G318,154B2 U0 G319,394B2 U0 G3* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tilt5ME150 8350140' 120' 100' 80'120'150 40'60'20'0'20'120 120 417540'60'45 100'626380' 100' 120' 20'90 90 20'0mCURB LINE6.140'60 60 30 12.260'18.380'24.4100'30.536.6120'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.7Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.RESTL Test Report #: PL03466-001OSQ-A-**-5ME-S-40K-ULInitial Delivered Lumens: 20,709Type V Medium DeliveredLumens*BUGRatings**Per TM15-1117,345B4 U0 G55700KInitialDeliveredLumens*BUGRatings**Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-1120,536B5 U0 G520,841B5 U0 G5* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tiltPosition of vertical planeof maximum candlepower.OSQ-A-**-5ME-S-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 20,536Initial FC at grade5SH150 6734140' 120' 100' 80'120'150 120 120 336720'0'20'40'45 60'80' 100' 120' 140'36.630.580'24.460'18.312.240'20'168490 40'60'100'5051.1.2.516.10'90 20'0mCURB LINE6.140'60 60 30 Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.RESTL Test Report #: PL03501-001OSQ-A-**-5SH-S-40K-ULInitial Delivered Lumens: 21,066US: 6120'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.7Position of vertical planeof maximum candlepower.OSQ-A-**-5SH-S-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 20,982Initial FC at gradeT (800) 236-6800 F (262) 504-5415Type V Short DeliveredLumens*BUGRatings**Per TM15-1117,722B4 U0 G45700KInitialDeliveredLumens*BUGRatings**Per TM15-11InitialDeliveredLumens*BUGRatings**Per TM15-1120,982B5 U0 G421,294B5 U0 G4* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating dendum.pdf. Valid with no tiltCanada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your projectconsult: ries15D80'20'0'20'40'60'80'100' 120' 140' 160' .360'RESTL Test Report #: PL03903-001OSQ-A-**-15D-S-40K-ULInitial Delivered Lumens: 22,600InputPowerDesignator6.1.140'80'15 Flood Distribution6.10m6.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.924.4S* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumensOSQ-A-**-15D-S-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 21,423Initial FC at grade25D150 109750150 80'82312120 120 5487590 27437Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.90 20'0'20'40'60'80'100' 120' 140' 160' 180'24.460'18.340'12.220'6.10'520m1 .5.220'.16.160 30 18.360'80'6.1 0m6.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 1,42321,741* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens30 RESTL Test Report #: PL03903-002OSQ-A-**-25D-S-40K-ULInitial Delivered Lumens: 22,633InputPowerDesignator12.240'60 25 Flood DistributionOSQ-A-**-25D-S-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 21,423Initial FC at grade40D80'20'0'20'40'60'80'100' 120' 140' 160' 180'24.460'18.340'12.220'6.10'520'20m1.5.2.16.140 Flood 1,20021,5156.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.9* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumensRESTL Test Report #: PL03903-003OSQ-A-**-40D-S-40K-ULInitial Delivered Lumens: 22,404US: www.cree.com/lightingOSQ-A-**-40D-S-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 21,200Initial FC at gradeT (800) 236-6800 F (262) 504-5415Canada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your projectconsult: ries60D150 24903150 80'18677120 120 1245190 6226Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.90 20'0'20'40'60'80'100' 120' 140' 160' 180'24.460'18.340'12.220'6.10'520'0m21.5.2.160 30 lDeliveredLumens*18,09421,42321,74112.240'60 60 Flood DistributionS24.46.1 0m6.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.9* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens30 RESTL Test Report #: PL03903-004OSQ-A-**-60D-S-40K-ULInitial Delivered Lumens: 22,301OSQ-A-**-60D-S-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 21,423Initial FC at gradeWSN150 1245940' 20'140'150 9344120 120 623090 3115Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.60 90 60 30 0' 20' 40' 60' 80' 100' 120' 140' 160' 180' 200' 220' 240'42.736.6120'30 RESTL Test Report #: PL04597-001OSQ-A-**-WSN-S-30K-ULInitial Delivered Lumens: 19,087US: 20'6.10'20'2 1 .7140'12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.748.8 54.9 61 67.1 73.2Wide Sign lDeliveredLumens*17,73420,99721,309* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumensOSQ-A-**-WSN-S-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 tiltInitial Delivered Lumens: 20,997Initial FC at gradeT (800) 236-6800 F (262) 504-5415Canada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – LargeLuminaire EPAFixed Arm Mount – OSQ-DA Weight: 28.5 lbs. (13kg)Single2 @ 180 2 @ 90 3 @ 90 3 @ 120 4 @ 90 0.801.611.262.061.682.52Adjustable Arm Mount – OSQ-AA Weight: 28.5 lbs. (13kg)Single2 @ 180 2 @ 90 3 @ 90 3 @ 120 3 @ 180 4 @ 180 4 @ 90 Tenon Configuration (0 -80 Tilt); If used with Cree tenons, please add tenon EPA with Luminaire EPAPB-1A*; PT-1; PW-1A3**PB-2A*; PB-2R2.375;PD-2A4(180);PT-2(180); PW-2A3**PB-2A*; PD-2A4(90);PT-2(90)PB-3A*; PD-3A4(90);PT-3(90)PB-3A*; PT-3(120)PB-3A*; 6PB-4A*(90);PB-4R2.375;PD-4A4(90); PT-4(90)0 Tilt0.8010 Tilt0.8120 Tilt1.2430 Tilt1.6445 Tilt2.2060 Tilt2.6370 Tilt2.8280 Tilt2.93Tenon Configuration (90 Tilt); If used with Cree tenons, please add tenon EPA with Luminaire EPAPB-1A*; PT-1; PW-1A3**PB-2A*; PB-2R2.375;PD-2A4(180);PT-2(180); PW-2A3**PB-2A*PB-3A*PB-3A*; PT-3(120)PB-3A*; 6.525.7310.8114.6411.1990 Tilt2.95* Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), 5 (5"), or 6 (6") for quad luminaire orientation** These EPA values must be multiplied by the following ratio: Fixture Mounting Height/Total Pole Height. Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6")US: www.cree.com/lightingT (800) 236-6800 F (262) 504-5415Canada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – LargeTenon EPAPart NumberEPATenons and Brackets‡ (must specify color)PB-1A*NonePB-2A*0.82PB-3A*1.52Square Internal Mount Vertical Tenons (Steel)- Mounts to 3-6" (76-152mm) square aluminum or steel polesPB-1A* – SinglePB-4A*(90) – 90 QuadPB-2A* – 180 TwinPB-4A*(180) – 180 QuadPB-3A* – 180 B-3R2.3751.62PB-4R2.3752.32PD Series Tenons0.09PT Series WM-DMNoneSquare Internal Mount Horizontal Tenons (Aluminum)- Mounts to 4" (102mm) square aluminum or steel polesPD-2A4(90) – 90 TwinPD-3A4(90) – 90 TriplePD-2A4(180) – 180 TwinPD-4A4(90) – 90 QuadWall Mount Brackets- Mounts to wall or roofWM-2 – Horizontal for OSQ-AA mountWM-4 – L-Shape for OSQ-AA mountWM-DM – Plate for OSQ-DA mount‡Round External Mount Vertical Tenons (Steel)- Mounts to 2.375" (60mm) O.D. round aluminum or steel poles or tenonsPB-2R2.375 – TwinPB-4R2.375 – QuadPB-3R2.375 – TripleRound External Mount Horizontal Tenons (Aluminum)- Mounts to 2.375" (60mm) O.D. round aluminum or steel poles or tenons- Mounts to square pole with PB-1A* tenonPT-1 – Single (Vertical)PT-3(90) – 90 TriplePT-2(90) – 90 TwinPT-4(90) – 90 QuadPT-2(180) – 180 TwinMid-Pole Bracket- Mounts to square polePW-1A3** – SinglePW-2A3** – DoubleRefer to the Bracket and Tenons spec sheet for more details* Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triple luminaireorientation or 4 (4"), 5 (5"), or 6 (6") for quad luminaire orientation** These EPA values must be multiplied by the following ratio: Fixture Mounting Height/TotalPole Height. Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6")Direct Mount ConfigurationsCompatibility with OSQ-DA Direct Mount BracketInput Power Designator2 @ 90 2 @ 180 3 @ 90 3 @ 120 4 @ 90 �üüN/AüüüüüüüüüN/Aüüüüüü3" SquareS3" RoundS4" SquareS4" RoundS5" SquareS5" RoundS6" SquareS6" RoundS 2015 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patentwww.cree.com/patents. Cree , NanoOptic , and Colorfast DeltaGuard are registered trademarks, and the Cree logo, Precision DeliveryGrid and OSQ are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. NEMA is a registered trademark of theNational Electrical Manufacturers Association. The DLC QPL logo is a registered trademark of Northeast Energy Efficiency Partnerships, Inc.US: www.cree.com/lightingT (800) 236-6800 F (262) 504-5415Canada: www.cree.com/canadaT (800) 473-1234 F (800) 890-7507
OSQ LED Area/Flood Luminaire – Large 1 Lumen maintenance values at 25 C (77 F) are calculated per TM-21 based on LM-80 data and in-situ luminaire testing 2 In accordance with IESNA TM-21-11,
