Transcription
OSQ SeriesOSQ LED Area/Flood Luminaire – LargeRev. Date: V21 10/23/2019DA MountProduct DescriptionThe OSQ Area/Flood luminaire blends extreme optical control, advanced thermal managementand modern, clean aesthetics. Built to last, the housing is rugged cast aluminum with an integral,weathertight LED driver compartment. Versatile mounting configurations offer simple installation.Its slim, low-profile design minimizes wind load requirements and blends seamlessly into thesite providing even, quality illumination. The ‘T’ input power designator is a suitable upgrade forHID applications up to 750 Watts, and the ‘U’ input power designator is a suitable upgrade for HIDapplications up to 1000 Watts.Applications: Parking lots, walkways, campuses, auto dealerships, office complexes, tunnels,underpasses and internal roadways27.2"(691mm)Performance Summary8.1"(206mm)NanoOptic Precision Delivery Grid opticAssembled in the U.S.A. of U.S. and imported partsInitial Delivered Lumens: Up to 27,1033.1"(79mm)Efficacy: Up to 139 LPWNEMA 7-Pin PhotocellReceptacle location(ordered as an option)CRI: Minimum 70 CRI (3000K, 4000K & 5700K); 90 CRI (5000K)CCT: 3000K, 4000K, 5000K, 5700KLimited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard finish/5 years onSynapse wireless control accessories/1 year on luminaire "(125mm)See http://creelighting.com/warranty for warranty termsWeight32.4 lbs. (14.7kg)Ordering InformationFully assembled luminaire is composed of two components that must be ordered separately:Example: Mount: OSQ-B-AASV Luminaire: OSQ-A-NM-2ME-T-40K-UL-SVMount (Luminaire must be ordered separately)*OSQOSQ-B-AA Adjustable ArmOSQ-DA Direct ArmOSQ-L-TSP Transportation Mount (stainless steel; do not specify color)OSQ-TM Trunnion MountColor Options:SV SilverBK BlackBZ BronzeWH White* Reference EPA and pole configuration suitability data beginning on page 9Luminaire (Mount must be ordered separately)OSQANMProductVersionMountingOSQANMNo MountInputPowerDesignatorOpticAsymmetric2ME*Type IIMedium3ME*Type IIIMedium4ME*Type IVMediumSymmetric5METype VMedium5SHType VShortWSNWideSign15D15 Flood25D25 Flood40D40 Flood60D60 FloodT166WU215WCCTVoltage30K3000K,70 CRI40K4000K,70 CRI50K5000K,90 CRI57K5700K,70 CRIULUniversal120-277VUHUniversal347-480V* Available with Backlight Shield when ordered with field-installed accessory (see table above)US: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) OptionsPML Programmable Multi-Level, upto 40' Mounting Height--Refer to PML spec sheet for details-- Intended for downlight applications at0 tiltPML2 Programmable Multi-Level,10-30' Mounting Height--Refer to PML spec sheet for details-- Intended for downlight applications at0 tiltQ9/Q8/Q7/Q6/Q5/Q4/Q3/Q2/Q1Field Adjustable Output-- Must select Q9, Q6, Q5, Q4, Q3, Q2, or Q1for T input power designator-- Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3,Q2, or Q1 for U input power designator-- Offers full range adjustability-- Refer to pages 11-12 for power andlumen values-- Not available with PML or PML2 optionsRRLRRNEMA 7-Pin Photocell Receptacle--7-pin receptacle per ANSI C136.41--Intended for downlightapplications with maximum45 tilt--Factory connected 0-10V dimleads--18" (457mm) seven-conductorcord exits luminaire--Photocell or shorting cap byothersRotate Left--LED and optic are rotated tothe left--Refer to RR/RL configurationdiagram on page 13 for opticdirectionalityRotate Right--LED and optic are rotated tothe right--Refer to RR/RL configurationdiagram on page 13 for opticdirectionality
OSQ LED Area/Flood Luminaire – LargeProductSpecificationsCONSTRUCTION & MATERIALS Slim, low profile design minimizes wind load requirements Luminaire housing is rugged die cast aluminum with an integral,weathertight LED driver compartment and high-performance heat sink Convenient interlocking mounting method on direct arm mount.Mounting adaptor is rugged die cast aluminum and mounts to 3-6"(76-152mm) square or round pole, secured by two 5/16-18 UNC boltsspaced on 2" (51mm) centersProduct SpecificationsSYNAPSE SIMPLYSNAP INTELLIGENT CONTROLThe Synapse SimplySNAP platform is a highly intuitive connected lighting solutionfeaturing zone dimming, motion sensing, and daylight harvesting with utility-gradepower monitoring and support of up to 1000 nodes per gateway. The system features areliable and robust self-healing mesh network with a browser-based interface that runson smartphones, tablets, and PCs. The Twist-Lock Lighting Controller (TL7-B2) and SiteController (SS450-002) take the OSQ Series to a new performance plateau, providingextreme energy productivity, code compliance and a better light experience. Mounting for the adjustable arm mount adaptor is rugged die castaluminum and mounts to 2" (51mm) IP, 2.375" (60mm) O.D. tenonElectrical Data* Adjustable arm mount can be adjusted 180 in 2.5 incrementsTotal Current (A) Transportation mount is constructed of 316 stainless steel and mountsto surface with (4) 3/8" fasteners by othersInput PowerDesignatorSystem Watts120-480V Trunnion mount is constructed of A500 and A1011 steel and isadjustable from 0-180 in 15 degree increments. Trunnion mountsecures to surface with (1) 3/4" bolt or (2) 1/2" or 3/8" .490.35U2151.831.080.930.810.620.45 Includes 18" (340mm) 18/5 or 16/5 cord exiting the luminaire. Whenordered with R option, 18" (340mm) 18/7 or 16/7 cord is provided Designed for uplight and downlight applications Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primerwith an ultra-durable powder topcoat, providing excellent resistance tocorrosion, ultraviolet degradation and abrasion. Silver, bronze, black,and white are available* Electrical data at 25 C (77 F). Actual wattage may differ by /- 10% when operating between 120-277V or347-480V /-10%OSQ Series Ambient Adjusted Lumen Maintenance1 Weight: OSQ-DA: 32.4 lbs. (14.7kg); OSQ-B-AA: 32.0 lbs. (14.5kg);OSQ-L-TSP: 44 lbs. (20.0kg); OSQ-TM: 36.1 lbs. (16.4kg)AmbientELECTRICAL SYSTEM Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers5 C (41 F) Power Factor: 0.9 at full load Total Harmonic Distortion: 20% at full load10 C(50 F) Integral 10kV surge suppression protection standard When code dictates fusing, a slow blow fuse or type C/D breaker shouldbe used to address inrush current15 C(59 F) Consult factory if in-luminaire fusing is required Designed with 0-10V dimming capabilities. Controls by others20 C(68 F) Refer to Dimming spec sheet for details 10V Source Current: 0.15mAREGULATORY & VOLUNTARY QUALIFICATIONS cULus Listed Suitable for wet locations Enclosure rated IP66 per IEC 60529 when ordered without R option Consult factory for CE Certified products Certified to ANSI C136.31-2001, 3G bridge and overpass vibrationstandards with AA, DA, TM, and TSP mounts. For adjustable armapplications requiring ANSI C136.31-2001 3G vibration certification,ensure that existing or new adjustable arm mount model numbermatches OSQ-B-AA for all OSQ large housing luminaires with powerdesignations “T”, and “U” ANSI C136.2 10kV surge protection, tested in accordance with IEEE/ANSIC62.41.2 Meets FCC Part 15, Subpart B, Class A limits for conducted and radiatedemissions Luminaire and finish endurance tested to withstand 5,000 hours ofelevated ambient salt fog conditions as defined in ASTM Standard B 11725 C(77 F)OpticInitialLMF25K hrReported2LMF50K hrReported2LMF75K hrReported2/Estimated3LMF100K .9630.953Symmetric1.000.990.980.9820.9721Lumen maintenance values at 25 C (77 F) are calculated per IES TM-21 based on IES LM-80 report data for the LEDpackage and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumenmaintenance factors. Please refer to the Temperature Zone Reference Document for outdoor average nighttime ambientconditions.2In accordance with IES TM-21, Reported values represent interpolated values based on time durations that areup to 6x the tested duration in the IES LM-80 report for the LED.3Estimated values are calculated and represent time durations that exceed the 6x test duration of the LED.AccessoriesField-InstalledBacklight ShieldOSQ-BLSLF– Front facingopticsOSQ-BLSLR– Rotated OpticsHand-Held RemoteXA-SENSREM- For successfulimplementation of theprogrammable multi-leveloption, a minimum of onehand-held remote isrequired Meets Buy American requirements within ARRASynapse Wireless Control Accessories DLC and DLC Premium qualified versions available with 70 CRI. Someexceptions apply. Please refer to https://www.designlights.org/search/for most current informationTwist-Lock Lighting ControllerTL7-B2- Suitable for 120-277V (UL) voltage only- Requires NEMA/ANSI C136.41 7-PinDimming Receptacle- Not for use with PML or Q options- Provides On/Off switching, dimming, powermetering, digital sensor input, and statusmonitoring of luminaires RoHS compliant. Consult factory for additional details Dark Sky Friendly, IDA Approved when ordered with 30K CCT and director transportation mounts only. Please refer to -for-industry/fsa/fsa-products/ for mostcurrent information CA RESIDENTS WARNING: Cancer and Reproductive Harm –www.p65warnings.ca.govUS: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234Bird SpikesOSQ-LG-BRDSPKSimplySNAP On-Site ControllerSS450-002- Verizon LTE-enabled- Designed for indoor applicationsBuilding Management System (BMS) GatewayBMS-GW- Required for BACNET integrationOutdoor Antennas(Optional, for increased range, 8dB gain)KIT-ANT420SM- Kit includes antenna, 20' cable and bracketKIT-ANT360- Kit includes antenna, 30' cable and bracketKIT-ANT600- Kit includes antenna, 50' cable and bracket
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards. To obtain an IES file specific to your project rea/osq-series2ME21111150 140' 120' 100' 80' 60' 40' 20' 0' 20' 40' 60' 80' 100' 120' 140'100'30.5150 80'1583424.465 60'120 120 1055640'.1 .2 .5 120'26.150'527820'90 90 18.312.20mCURB LINE6.140'12.260'18.380'24.4100'30.542.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.760 60 30 Position of vertical planeof maximum candlepower.Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL07701-001AOSQ-A-**-2ME-U-40K-ULInitial Delivered Lumens: 26,946OSQ-A-**-2ME-U-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 26,583Initial FC at gradeType II Medium Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T20,688B3 U0 G321,902B3 U0 G318,600B3 U0 G322,330B3 U0 G3U25,246B3 U0 G326,583B3 U0 G322,000B3 U0 G327,103B3 U0 G3* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tilt21342150 140' 120' 100' 80' 60' 40' 20' 0' 20' 40' 60' 80' 100' 120' 140'100'30.5150 80'16007120 120 1067124.460 60'40'20'.1 .2 .5 1 20'533620'90 90 18.312.26.150mCURB LINE6.140'12.260'18.380'24.4100'30.542.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.760 60 Position of vertical planeof maximum candlepower.30 Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL07700-001AOSQ-A-**-2ME-U-57K-UL w/OSQ-BLSLFInitial Delivered Lumens: 22,822OSQ-A-**-2ME-U-40K-UL w/OSQ-BLSLFMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 20,427Initial FC at gradeType II Medium w/BLS Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T15,897B2 U0 G216,830B3 U0 G214,250B2 U0 G217,159B3 U0 G2U19,400B3 U0 G220,427B3 U0 G216,900B3 U0 G220,826B3 U0 G2* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tiltUS: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards. To obtain an IES file specific to your project rea/osq-series3ME17736150 140' 120' 100' 80' 60' 40' 20' 0' 20' 40' 60' 80' 100' 120' 140'100'30.560 80'24.4150 1330260'120 120 18.340'886812.2.1 .2 .51 220'56.10'443420'90 90 0mCURB LINE6.140'12.260'18.380'24.430.5100'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.760 60 30 Position of vertical planeof maximum candlepower.Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL07698-001AOSQ-A-**-3ME-U-40K-ULInitial Delivered Lumens: 27,305OSQ-A-**-3ME-U-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 26,583Initial FC at gradeType III Medium Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T20,688B3 U0 G321,902B3 U0 G318,600B3 U0 G322,330B3 U0 G3U25,246B3 U0 G326,583B3 U0 G322,000B3 U0 G327,103B3 U0 G3* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tilt17805150 140' 120' 100' 80' 60' 40' 20' 0' 20' 40' 60' 80' 100' 120' 140'100'30.5150 80'1335460 60'120 120 8903.220'20'90 12.2.510'445126.150mCURB LINE6.112.240'90 24.418.3.140'60'18.380'24.430.5100'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.760 60 Position of vertical planeof maximum candlepower.30 Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL07699-001AOSQ-A-**-3ME-U-57K-UL w/OSQ-BLSLFInitial Delivered Lumens: 23,601OSQ-A-**-3ME-U-40K-UL w/OSQ-BLSLFMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 20,986Initial FC at gradeType III Medium w/BLS Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T16,333B2 U0 G217,291B2 U0 G214,650B2 U0 G217,629B2 U0 G3U19,931B2 U0 G320,986B2 U0 G317,400B2 U0 G321,397B2 U0 G3* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tiltUS: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards. To obtain an IES file specific to your project rea/osq-series4ME18516150 120' 100' 80' 60' 40' 20'120'150 1388780'120 120 .2.540'18.312.260 20'6.150'90 36.630.51220'462990 80' 100' 120'45 24.4.160'92580mCURB LINE6.140'12.260'18.324.480'36.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.660 30 0' 20' 40' 60'100'Position of vertical planeof maximum candlepower.Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL07690-001AOSQ-A-**-4ME-U-40K-ULInitial Delivered Lumens: 27,527OSQ-A-**-4ME-U-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 26,583Initial FC at gradeType IV Medium Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T20,688B3 U0 G321,902B3 U0 G318,600B3 U0 G322,330B3 U0 G3U25,246B4 U0 G326,583B4 U0 G322,000B3 U0 G327,103B4 U0 G3* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tilt19350150 150 120' 100' 80' 60' 40' 20'120'14513120 80'120 967540'483836.630.524.4.2.518.3112.26.150'20'60 80' 100' 120'45 220'90 0mCURB LINE6.140'12.260'18.380'24.436.6 30.5 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.660 30 .160'90 0' 20' 40' 60'100'Position of vertical planeof maximum candlepower.Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL07692-001AOSQ-A-**-4ME-U-57K-UL w/OSQ-BLSLFInitial Delivered Lumens: 22,793OSQ-A-**-4ME-U-40K-UL w/OSQ-BLSLFMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 20,427Initial FC at gradeType IV Medium w/BLS Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T15,897B2 U0 G316,830B2 U0 G314,250B2 U0 G317,159B2 U0 G3U19,400B3 U0 G320,427B3 U0 G316,900B2 U0 G320,826B3 U0 G3* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tiltUS: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards. To obtain an IES file specific to your project rea/osq-series5ME8892150 140' 120' 100' 80'120'150 6669120 120 444640'60'60 60 30 40'80' 100' 120' 140'36.630.524.418.3.1.2.520'12.216.120mCURB LINE6.140'12.260'18.380'24.4100'30.5120'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m36.66.1 12.2 18.3 24.4Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL07882-001AOSQ-A-**-5ME-U-30K-ULInitial Delivered Lumens: 21,41060'60'0'90 20'80'40'22230'45 20'90 20'100'30.5 36.6 42.7Position of vertical planeof maximum candlepower.OSQ-A-**-5ME-U-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 24,666Initial FC at gradeType V Medium Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T20,213B5 U0 G521,469B5 U0 G519,800B5 U0 G521,842B5 U0 G5U23,222B5 U0 G524,666B5 U0 G523,400B5 U0 G525,095B5 U0 G5* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tilt5SH11539150 140' 120' 100' 80'120'150 8654120 120 576940'60'20'0'20'40'45 60'80' 100' 120' 1.50'90 90 20'CURB LINE0m16.1240'12.260'18.324.480'100'60 60 30 30.5120'42.7 36.6 30.5 24.4 18.3 12.2 6.1 0m36.66.1 12.2 18.3 24.4Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.CESTL Test Report #: PL10754-001AOSQ-A-**-5SH-U-40K-ULInitial Delivered Lumens: 25,67930.5 36.6 42.7Position of vertical planeof maximum candlepower.OSQ-A-**-5SH-U-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 26,051Initial FC at gradeType V Short Distribution3000K (70 CRI)Input PowerDesignator4000K (70 CRI)5000K (90 CRI)5700K (70 CRI)Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11Initial DeliveredLumens*BUG Ratings**Per TM-15-11T21,349B5 U0 G322,675B5 U0 G320,900B5 U0 G323,069B5 U0 G3U24,527B5 U0 G326,051B5 U0 G324,700B5 U0 G326,504B5 U0 G4* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: 15-11BUGRatingsAddendum.pdf. Valid with no tiltUS: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards. To obtain an IES file specific to your project rea/osq-series15D150 144855150 0'20'108641120 120 20'40'60'80'100'120' 140' 160' 180'80'24.460'18.340'12.220'6.115 Flood Distribution3000K (70 CRI)4000K (70 CRI)5000K (90 CRI)5700K (70 890 36214Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.90 0'2010 5 2 120'0m.5.26.1.112.240'60 60 18.360'80'6.130 InputPowerDesignator24.40m6.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.930 CESTL Test Report #: PL07689-001AOSQ-A-**-15D-U-30K-ULInitial Delivered Lumens: 23,254OSQ-A-**-15D-U-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 26,051Initial FC at grade* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial deliveredlumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating 03/TM-15-11BUGRatingsAddendum.pdf. Valid with no tilt25D150 82889150 80'62167120 120 4144590 20722Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.90 20'0'20'40'60'80'120' 140' 160' 180'24.4100'60'18.340'12.220'6.10'2010520'0m2 1.5.2.16.118.360'60 80'6.130 0m24.46.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.930 CESTL Test Report #: PL07696-001AOSQ-A-**-25D-U-30K-ULInitial Delivered Lumens: 23,2653000K (70 CRI)4000K (70 CRI)5000K (90 CRI)5700K (70 tPowerDesignator12.240'60 25 Flood DistributionOSQ-A-**-25D-U-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 26,051Initial FC at grade* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial deliveredlumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating 03/TM-15-11BUGRatingsAddendum.pdf. Valid with no tilt40D150 54031150 20'40523120 120 2701590 13508Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.80'120' 140' 160' 180'24.460'0'18.340'12.220'6.10'90 20'2020'40'1060'80'100'0m521.560'60 6.118.324.480'6.1 0m30 .13000K (70 CRI)4000K (70 CRI)5000K (90 CRI)5700K (70 tPowerDesignator12.240'60 .240 Flood Distribution6.1 12.2 18.3 24.430.536.6 42.7 48.8 54.930 CESTL Test Report #: PL07697-001AOSQ-A-**-40D-U-30K-ULInitial Delivered Lumens: 22,943OSQ-A-**-40D-U-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 26,051Initial FC at gradeUS: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial deliveredlumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating 03/TM-15-11BUGRatingsAddendum.pdf. Valid with no tilt
OSQ LED Area/Flood Luminaire – LargePhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards. To obtain an IES file specific to your project rea/osq-series60D150 12489150 936680'120 120 20'0'20'40'60'80'100'120' 140' 160' 180'24.460'18.340'12.220'6.160 Flood Distribution3000K (70 CRI)4000K (70 CRI)5000K (90 CRI)5700K (70 90 3122Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.90 0'100m5220'1.2.560 18.360'24.480'6.1 0m30 6.112.240'60 .1InputPowerDesignator6.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.930 CESTL Test Report #: PL08100-001BOSQ-A-**-60D-B-30K-ULInitial Delivered Lumens: 10,079OSQ-A-**-60D-U-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 TiltInitial Delivered Lumens: 26,051Initial FC at grade* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial deliveredlumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating 03/TM-15-11BUGRatingsAddendum.pdf. Valid with no tiltWSN150 1533740' 20'140'150 120 120 766890 3834Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.36.6100'30.580'24.460'18.340'12.220'90 0'20'40'60 60 30 0' 20' 40' 60' 80' 100' 120' 140' 160' 180' 200' 220' 240'42.7120'1150230 CESTL Test Report #: PL07695-001AOSQ-A-**-WSN-U-30K-ULInitial Delivered Lumens: 23,1166.10m2116.1.2.5.13000K (70 CRI)4000K (70 CRI)5000K (90 CRI)5700K (70 42.7140'12.2 6.1 0m 6.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.9 61 67.1 73.2OSQ-A-**-WSN-U-40K-ULMounting Height: 25' (7.6m) A.F.G., 60 tiltInitial Delivered Lumens: 26,051Initial FC at gradeUS: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234Wide Sign Distribution* Initial delivered lumens at 25 C (77 F). Actual production yield may vary between -10 and 10% of initial deliveredlumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating 03/TM-15-11BUGRatingsAddendum.pdf. Valid with no tilt
OSQ LED Area/Flood Luminaire – LargeLuminaire EPAAdjustable Arm Mount – OSQ-B-AA Weight: 32.0 lbs. (14.5kg)Single2 @ 180 2 @ 90 3 @ 90 3 @ 120 3 @ 180 4 @ 180 4 @ 90 Tenon Configuration (0 -80 Tilt); If used with Cree Lighting tenons, please add tenon EPA with Luminaire EPAPB-1A*; PT-1; PW1A3**PB-2A*; PB-2R2.375;PD-2A4(180);PT-2(180); PW-2A3**PB-2A*; PD-2A4(90);PT-2(90)PB-3A*; PD-3A4(90);PT-3(90)PB-3A*; PT-3(120)PB-3A*; 6PB-4A*(90);PB-4R2.375;PD-4A4(90); PT-4(90)0 Tilt0.8010 Tilt0.8120 Tilt1.2430 Tilt1.6445 Tilt2.2060 Tilt2.6370 Tilt2.8280 Tilt2.93Tenon Configuration (90 Tilt); If used with Cree Lighting tenons, please add tenon EPA with Luminaire EPAPB-1A*; PT-1; PW1A3**PB-2A*; PB-2R2.375;PD-2A4(180);PT-2(180); PW-2A3**PB-2A*PB-3A*PB-3A*; PT-3(120)PB-3A*; 6.525.7310.8114.6411.1990 Tilt2.95* Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), 5 (5"), or 6 (6") for quad luminaire orientation** These EPA values must be multiplied by the following ratio: Fixture Mounting Height/Total Pole Height. Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6")Tenon EPAPart NumberEPATenons and Brackets‡ (must specify 2Square Internal Mount Vertical Tenons (Steel)- Mounts to 3-6" (76-152mm) square aluminum or steelpolesPB-1A* – SinglePB-4A*(90) – 90 QuadPB-2A* – 180 TwinPB-4A*(180) – 180 QuadPB-3A* – 180 -4R2.3752.32PD Series Tenons0.09PT Series WM-DMNone* Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triplelumin
OSQ LED Area/Flood Luminaire – Large * Electrical data at 25 C (77 F). Actual wattage may differ by /- 10% when operating between 120-277V or 347-480V /-10% 1 Lumen maintenance values at 25 C (77 F) are calculated
