Transcription
SST-20-Blue Product DatasheetSST-20-BBlue LEDFeatures:Table of ContentsSST-20 Binning Structure. . . 2Part Numbering and Bin KitInformation. . . . . . . . . . . . . . . . 3 High Power Blue LED with Peak Wavelength of 450nm Typical Wall-Plug Efficiency of 72% at 350 mA Maximum drive current: 3 A Available with 2 industry standard soldering footprint configurations High thermal conductivity package - junction thermal resistance of only 3.5 C/WOptical and ElectricalCharacteristics. . . . . . . . . . . . . 4 Available with 120 viewing angleA120 - Mech. Dimensions. . . 6 Electrically isolated thermal pathB120 - Mech. Dimensions. . . 7 RoHS and REACh compliant 8000V HBM ESD rating per MIL STD-883DA120/B120 - Tape and Reel. . 8Reel Packaging. . . . . . . . . . . . . 9Box Packaging Info. . . . . . . . 10Soldering Profile. . . . . . . . . . 11Precautions for Use. . . . . . . . 12Applications Horticulture / Growlights Remote-phosphor fixtures Accent and effect lighting Stage lighting Architectural lightingHistory of Changes. . . . . . . . 131PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product DatasheetSST-20 Binning StructureSST-20 Blue LEDs are tested for luminous flux and chromaticity at a drive current of 350mA - 20ms single pulse and placed into one of thefollowing luminous flux (FF) and chromaticity (WW) bins:Flux Bins - Test condition 350mA, 250C, 20ms pulseFlux Bin (FF)Minimum Flux (mW)Maximum Flux (mW)R630670S670710T710750U750790V790830Wavelength Bins - Test condition 350mA, 250C, 20ms pulse*Note:Chromaticity Bin (WW)Minimum Wavelength (nm)Maximum Wavelength (nm)B2440445B3445450B4450455B5455460Luminus maintains a /- 6% tolerance on flux measurements.Ordering InformationProductsOrdering Part igh Power 2-mm2 Blue LED in a 3535 surface mount package and a120-degree viewing angle - Type A soldering pad configurationSST-20-B-B120SST-20-B-B120-xx123High Power 2-mm2 Blue LED in a 3535 surface mount package and a120-degree viewing angle - Type B soldering pad configuration2PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product DatasheetPart Number NomenclatureSST20Product FamilySST: Surface MountPackage A PAA(A) FCCC LED Emission AreaColorPackage ConfigurationBin kit20: 2.0 mm2 A : ColorB BlueP: Soldering pad configurationA type - see page 6B type - see page 7AA(A): Viewing angle 120 See TablesF minimum flux binCCC: Chromaticity bin kitSST-20 Bin Kit Order CodesThe following table describes the bin kit ordering codes available for the SST-20 Blue LEDs. Each bin kit specifies a minimum flux as wellas specific chromaticity bins allowed. Please note that within each kit a maximum flux is not specified and as a result Luminus may shipany part meeting or exceeding the minimum flux specification. Shipments will always meet the listed chromaticity bins. For informationon ordering bin kits not listed below, please contact Luminus.SST-20 Blue Bin Kit Order CodesLuminous FluxColorChromaticity BinsKit B3,B4,B5T450Bin Kit FluxCodeMin. FluxRBlueProduct Shipping & Labeling InformationAll SST-20 products are packaged and labeled with their respective bin as outlined in the tables on pages 2 & 3. Each reel will onlycontain one bin.SST-20 BlueSST20BP120FCCCProduct FamilyLED Emission AreaColorPackage ConfigurationBin kitSST: Surface MountPackage20: 2.0 mm2ColorP: Soldering pad configurationA type - see page 6B type - see page 7Flux and Chromaticity bin kitcode as outlined above3PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-BlueProductDatasheet(Part #) ProductDatasheetOptical and Electrical Characteristics1-3Optical and Electrical Characteristics at ard Current at test2If350mAOutput Radiometric PowerΦr710mWForward VoltageVfWall-Plug Efficiency2.52.80WPE72Photosynthetic Photon Flux (PPF)4mmol/s2.68PPF Efficacy (PPF/W)mmol/J2.732 Ø1/2120Viewing Angle (A120 / B120)Peak Ifmin, Ifmax0.23AIf-smax4AMaximum Reverse Current3IrevN.A.LED Junction TemperatureTj150FWHMForward Current (CW)2Maximum Surge CurrentC0ESD withstand VoltageHBM Per JEDEC/ESDA STANDARD JS-001VHBM8000VESD withstand VoltageCDM Per JEDEC/ESDA STANDARD JS-002VCDM1000VOperating TemperatureTOPR-4080Storage TemperatureTSTG-40100Thermal resistance junction to case(electrical)RΘjc-el3.5Note 1:Ratings are based on operation at a constant junction temperature of Tj 25ºC.Note 2:Sustained operation at maximum current will result in shortened lifetime.Note 3:Not designed for reverse voltage operation.Note 4:Values at 350mA, Tj 25C and computed in the 400nm to 700nm range.4PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights Reserved0CC0 C/WLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-BlueProductDatasheet(Part #) ProductDatasheetOptical and Electrical CharacteristicsRelative Output Flux vs. Forward CurrentForward Voltage vs. Forward CurrentRelative Output Flux vs. Junction TemperatureTypical SpectraTypical Angular Pattern of Radiant Power - Types A120 and B1204Note 4: Angular pattern measurements were made at 350mA, 250C.5PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product Datasheet867DMechanical Dimensions55423A120 Package 0C3.453.25C2.301.300.48R1.30OPTICALREFERENCEBBSIDE VIEWFRONT VIEWBACK VIEWRecommended PCB Solder Pad and Stencil Pattern58567423A120 Package ConfigurationThis document and its contentsare confidential information ofLuminus Devices, Inc.Copyright 2005 Luminus Device,Inc.All rights reserved.AD11145 SONORA COURTSUNNYVALE, CA 94086408-708-7000PROPRIETARY ANDCONFIDENTIALDESCRIPTION:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SIZE:ALL MEASUREMENTS ARE 0.13mmUNLESS OTHERWISE EET:A25:1X.XIE678452310.50C3.250.581.303.25 2.30 1.15C0.480.480.253.25BNote 5:0.75Recommended PCB Solder Pad1145 SONORA COURTSUNNYVALE, CA 94086408-708-7000PROPRIETARY ANDCONFIDENTIALDimensions are in millimeters /- 0.13 mmThis document and its contentsare confidential information ofLuminus Devices, Inc.Copyright 2005 Luminus Device,Inc.All rights reserved.ADESCRIPTION:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SIZE: 2018 Luminus Devices, Inc. - All Rights ReservedALL MEASUREMENTS ARE 0.13mmUNLESS OTHERWISE .XIE876ADRAWING,OUTLINE,SST-20-W-PAD ALuminus Devices, Inc. T 408.708.7000 www.luminus.comMILLIMETERS1145 SonoraCourt[INCHES] Sunnyvale,CA 25:194086 AB6PDS-002955 Rev 02BRecommended Stencil Pattern54321
SST-20-Blue Product Datasheet867Mechanical Dimensions654D23B120 Package .452.701.701.000.50R1.300.43OPTICALREFERENCEBSIDE VIEWFRONT VIEW82.70567BACK VIEW423Recommended PCB Solder Pad and Stencil Pattern61145 SONORA COURTSUNNYVALE, CA 94086408-708-7000PROPRIETARY ANDCONFIDENTIALB120 Package ConfigurationThis document and its contentsare confidential information ofLuminus Devices, Inc.Copyright 2005 Luminus Device,Inc.All rights reserved.AB2.70DESCRIPTION:2.70DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SIZE:ALL MEASUREMENTS ARE 0.13mmUNLESS OTHERWISE SPECIFIEDADRAWING,OUTLINE,SST-20-W-B130MILLIMETERS 25:1X.XIE78654230.400.352.702.7011.70 0.900.500.500.250.55Recommended PCB Solder PadNote 6:Recommended Stencil PatternDimensions are in millimeters /- 0.13 mm7PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminusPROPRIETARYDevices, ANDInc. T 408.708.7000 www.luminus.com1145 SONORACONFIDENTIALC1145 Sonora Court Sunnyvale, CASUNNYVALE,94086This document and its contentsare confidential information ofLuminus Devices, Inc.Copyright 2005 Luminus Device,Inc.All rights 20-W PAD
SST-20-Blue Product DatasheetTape and Reel - A120 and B120 Package Configurations7,8 & 7 2'( 6,'(% % 815((/,1* ',5(&7,21 12'( 6,'( 6(&7,21 % % 6(&7,21 127(6 ),1 / 7 3( 1' 5((/ 3 &. *,1* 0867 0((7 7 ( 5(48,5(0(176 2) -('(& 67' /(9(/ /( 9( PP LQ@ 2) 7 3( (037 )25 /( ' ,1 (037 32&.(76 /( 9( PP LQ@ 2) 7 3( (037 )25 75 ,/(5 (037 32&.(76 0867 &203/ 72 (, & ; & '(7 ,/ &815((/,1* ',5(&7,21723 9,(:'(7 ,/ ' Note 7:Note 8:Dimensions are in millimetersQuantity per reel: 1,000 pcs8PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product DatasheetReel card(bag)(bag)HumidityLabel Label:containsthe type,lot number,containsthe type,Lotquantityproductparameters#, Quality,andProductparametersReel LabelLabel Fields: CPN: Luminus ordering part number MPN: For Luminus internal use Qty on reel 2D Bar codes Flux: FF as defned on page 3 Voltage: VV as defined on page 3 Color: CC as defined on page 6 Mfg Info: For Luminus internal use9PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product DatasheetBox Packaging Information*Capacity 5 reels per boxLabel: contains the type, Lot#, Quality, Productparameters*Capacity 10 reels per box10PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product DatasheetSoldering ProfileProfile FeatureSn-Pb Eutectic AssemblyPb-Free AssemblyPreheat & SoakTemperature min (Tsmin)Temperature max (Tsmax)Time (Tsmin to Tsmax) (ts)100 C150 C60-120 seconds150 C200 C60-120 secondsAverage ramp-up rate (Tsmax to Tp)3 C/second max3 C/second maxLiquidous temperature (TL)Time at liquidous (tL)183 C60-150 seconds217 C60-150 secondsPeak package body temperature (Tp)*230 C 235 C255 C 260 CClassification temperature (Tc)Time (tp) within 5 C of the specifiedclassification temperature (Tc)Average ramp-down rate (Tp to Tsmax)Time 25 C to peak temperature235 C260 C20 seconds30 seconds6 C/second max6 C/second max6 minutes max8 minutes max* Tolerance for peak profile temperature(Tp) is defined as a supplier minimum and a user maximum.** Tolerance for time at peak profile temperature(tp) is defined as asupplier minimum and a user maximum.11PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product DatasheetPrecautions for UseStorage:1. Before opening the packageThe LEDs should be kept at a temperature lower than 40 C and relative humidity lower than 90%. The LEDs should be used within ayear. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended.2. After opening the packageThe LEDs should be kept at temperature lower than 30 C and relative humidity lower than 60%. The LEDs should be soldered within168 hours (7days) after opening the moisture proof package.If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture proof packagewithin absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and toseal the moisture proof package again.If the moisture absorbent material (silica gel) vapors or expires the expiration date, baking treatment should be performed by usingthe following conditions : 60 C for 20 hours.The LEDs electrode and leadframe comprise a silver plated copper alloy. The silver surface may be affected by environments. Pleaseavoid conditions which may cause the LEDs to corrode or discolore. The corrosion or discoloration might lower solderability or affectoptical characteristics.Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.Static Electricity:1. The products are sensitive to static electricity, and care should be taken when handling them.2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear a anti-electrostatic wristband or anti-electrostatic gloves when handling the LEDs.3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs.12PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product DatasheetHistory of ChangesRevDescription of Change0109/25/2017Initial Release - Preliminary Specifications0207/07/2018Update picture on front page. Remove preliminary wording. Add PPF & PPF/W values13PDS-002955 Rev 02 2018 Luminus Devices, Inc. - All Rights ReservedLuminus Devices, Inc. T 408.708.7000 www.luminus.com1145 Sonora Court Sunnyvale, CA 94086
SST-20-Blue Product Datasheet SST-20 Binning Structure SST-20 Blue LEDs are tested for luminous flux and chromaticity at a drive current of 350mA - 20ms single pulse and placed into one of the following luminous flux (FF) and chromaticity (WW) bins: Flux Bin (FF) Minimum Flux (mW) Maximum Fl
