Transcription
Andersen / Pella Casement &Awning OperatorsPlease send a sample foraccurate identificationSpecify Handing.AndersenRight Hand Shown58Andersen58-RevBlack nylon shoe withslot for channel.Shoe is mountedunder operator arm.* 9-1/4" or 10-1/4"3-7/8"2073í58-2 Crank Handle soldseparately. Track soldseparately.Order 58-Channel.OffsetdownANDE RSEN9/16"**Includes 975-1 CrankHandle.58-2 crank handle sold separately.*Please Specify Long or Short Arms When Ordering:Andersen10002Bracket soldseparately2026AndersenLeft hand available,Limited quantites.Right hand obsolete.Order 2073 shownabove and 2074 track.Left Hand ShownLong - 34"Short - 24-7/8"3-1/8"*9" & 11" Arm*Arm measured from gearcenter to shoe rivet centerAndersen**1-1/2"1-1/2"Specify Handing.Right Hand Shown*Arm measured from gearcenter to shoe rivet center.Right HandShownBronze painted finish*10-1/4"ANDERSEN1285*Andersen58-2 crank handlesold separately.*Arm measuresfrom gear centerto button rivetcenter3"9" or 11"*Long / Short*12852-3/4"1-3/16"4"17-1/8"12-3/8"Comes with rods and975-1 Crank HandleTOP VIEW OF HOUSING3-7/8"Right hand shown see note above*3-1/8"975-1 crank9" actual measurement - 8-7/8"11" actual measurement - 11-3/16" handle 93*UNAVAILABLE5-5/8"Right HandShown.22-7/16"33"9-1/2"*Available in 33",36", 39" ArmsOrder #125-16 1/4replacement trackseparately.Comes with #00301 crank ctions.58-2 handle sold 4-5/8"separately.43.54*Long 5"Short 3-5/32"Please specify.14-3/4"Sill Sizes: 20", 21", 30"Limited SupplyTRUTHWe have windowoperators for all windowconfigurations. Pleasecontact our CustomerService Department at800-678-1919 forassistance with yourwindow hardware needs.Track sold separately. Available in 17", 21"& 25". Specify left or right hand.Order No. 327 CrankHandle Separately4"9-1/2"Left Hand Shown.17319 Blaine DriveHagerstown, Md 21740Toll Free: 800-678-1919Fax: 888-250-3960e-mail: blainehdw@aol.comweb: www.blainewindow.comG5-55
Awning OperatorsReplacement3707CUSTOM AWNING OPERATORSTru SealOperatorbleilaaavUn2-1/4"Replace withNo. 95, at right1. Operator drilledto your sample.2. Link Attached.3. Crank handleincluded.4. Fastenerssupplied whensample 16-18ThreadsRight HandShown5/16X 18TappedOrder 3707,at leftSold with No.807/16" 303 CrankHandle37132-3/16"Aluminum Finish5-1/4"5-1/4"Sold with#303CrankHandle3/8"Dia.2-3/16"7/16"Right HandShown3718Right co2045WoodcoSold with #303crank handle.Tapped1/4" - 28Tapped1/4" - 28LEBLAAI 5"VNA5/16X 18Tapped4-11/16"FlatArmG5-56OffsetArm17319 Blaine DriveHagerstown, Md 217405"1-1/2"5/16" HexRight Hand Shown.2048E-RingStud5/16" HoleDiameterTOP VIEW OF HOUSINGTOP VIEW OF HOUSING4-1/4"3-7/8"4-3/4"5-7/16"Offset1/8"Sold with#303crankhandle.3-7/8"Sold with#303 crankhandle.4-11/16"Sold with #303crank handle.Sold with #344crank handle.5/16 X 18Tapped10-241-1/8"ThreadedStudRight HandShown77U5-1/4"5/16-18ThreadReplace with No. 77Comes with#303 CrankHandle2-3/16"5-1/4"27/32"13/16"Comes with No.320 CrankHandleRight HandShownRight HandShown2-1/2"1-1/2"7/16"1-3/8"7/16"5-1/8"Sold with #901 crankhandle.2008 Flat7/16"Aluminum Finish5/16X 18Tapped5/16X 18Tapped5/16-18Thread5"4-5/8"2"Right Hand5-1/8"2066Sold with #320Crank Handle.60-OrigLinkPLEASE MAILYOUR COMPLETESAMPLE (IncludingArm, Link & AllFasteners At TheEnd Of The Link)73-RSold with #303crank handle.Right Hand Shown.Toll Free: 800-678-1919Fax: 888-250-3960Now with newstyle housing.Will differslightly fromthe picturee-mail: info@blainewindow.comweb: www.blainewindow.com
Please send a sample foraccurate identification22.1022.19Front MountRear MountTruth Casement & Awning OperatorsAluminum & Vinyl WindowAwning Operator24"Arm LengthBlaine Part No.Order 10579.XX crankhandle separatelyTrack No. 30169 - 2 per ColorAluminumClayW hiteChestnut Brz.BronzeW hite*Note:RM models have rear threaded holes for rearmounting.Truth Dual Arm Operator11.43.00.001 20-1-8” (A)11.44.00.001 28-3/4” (A)Arm LengthBlaine Part No.*“A”Shoes sold separately .Order number 10005Guide BarBBlaine Part 50ADual PullSashFrameB.204Shoe Stud111.468 Max.449As ShownOpposite1.950Preferred Mounting HolesRecommended Screws:Operators:Wood: 6(P/N 19240.92) Steel SST #8 x 1.0Phillips, Flat Head, Sheet Metal ScrewsPVC / Metal: 6 #8 Phillips, Flat Head Screws(Length and thread type determined byprofile).Guide Bar: 3(P/N 19240.92) #8 x 1.0 Phillips,Flat Head, sheet metal screws.816 Min.TOP VIEWGuide BarShoe StudsCoverHandleGuide BarDetach Clips S.S.Guide bar sold separately. Order number31641.92 (22-3/4") or 31642.92 (30-3/4").(Guide 9.XX3164230591Guide BarA.312**Number 10341 Cover sold separately.Number 10579 crank handle sold separately.Order handle color to match the cover.30591 DetachClip 41Guide Bar10005Shoe Studs10341.XXCover10579.XXHandle31642 Guide BarHardware ShownSold SeparatelyTruth Dyad Arm Operator*No. 10341 cover sold separately3-15/16"No. 10579 Crank Handle sold separately. Order color matcing no. 10341cover.ClipLINKOFFSETSIDE VIEWBracket for end of link sold separately. Order 12511.92bracket for 15.11.00.002 operator. For 15.11.00.001operator, order 12510.92 bracket, as shownG5-6017319 Blaine DriveHagerstown, Md 21740Toll Free: 800-678-1919Fax: 888-250-3960e-mail: info@blainewindow.comweb: www.blainewindow.com
XX denotes color. Please contactCustomer Service for availablecolors.22.21Truth Awning / Casement OperatorsTruth Scissors Arm Operator ForAwning Windows"A"Rear Mount (2 Holes)orFront Mount (4 Holes)"B"Rear Mount Dimension(Inside holes on front mount 6-1/8" c/c)10579 Crank HandleSold separatelyOperatorPart ab"B"ArmClearance1/4"Front*Order 20008 Sash HookseparatelyScissors Arm Operator ForAwning Windows23.03.XX.001 as shown23.03.XX.002 77.XX.001 as shown23.77.XX.002 opposite13-1/2"Left HandRight Hand10579 Crank handle sold separately23.01.XX.001 as shown23.01.XX.002 oppositeDiscontinued “Original Style”Arm9”9-1/2”10579.XX crank handlesold separatelyAlso available with rear mount housing.Order #23.00.XX.001 as shown, aboveor #23.00.XX.002 opposite17319 Blaine DriveHagerstown, Md 21740Toll Free: 800-678-1919Fax: 888-250-3960Due to engineering designchanges, “New Style Arm”replaces original.In some cases the No. 3 position mountingscrew may need to be eliminated or grounddown in length due to interference in the fullclosing position of the arm. Anotheralternative would be to grind a notch in thearm to clear the screw end.e-mail: info@blainewindow.comweb: www.blainewindow.comG5-61
Awning Operators1001PeachtreeOperator3-5/8"800A1. Determine the similarity of your sample tothepicture, at left.Sold asa kit2. Note the following:a. 800-A kits work for most obsoletejalousie operators.b. 800-A operators work on the leftand right side.c. 3 links in package allow for best3-1/2"hook-up to replace original.2-7/8"d. Package includes all fasteners.e. Comes in dull aluminum finishReplacementDetroit Swing Lite only. 563-15/16"Order crank handleseparately:01001-1-0607/8"3-7/8" &4-3/4"holecenters2-7/8"5414Arm Lengths: 9", 13"Nowmanufacturedby Blaine13"Sold with #302Crank Handle.9”9"11/16”Sold with #301Crank Handle.Bronze painted finishSpecify Handing.Left Hand Shown.Left Hand MostCommonly Used.Right Hand Shown.3-7/16”4-1/4" hole centers2020738CrestlineNo. 361 GoldCrank HandleIncludedCrestlineSold with #302Crank Handle.Ualco712Extra 14 Tooth Gears Also Available. Order738. Covers no longer available.45-1/2Stanley1-1/2"11/16"Operator for ResidentialSash. Use with #712Gear, shown at left and#399 Crank Handle . Bothsold separately.5/16"399Die CastAluminum Finish14 tooth replacement gear forCrestline No. 2020 Operator322 Crank handle sold separatelyStanleyOrder No. 468-1" connector Nowmanufacturedby Blaine1-3/8"3/8"HexOrder No. 322 crank handle separately1"1-3/4"5/16"Hex2"2-3/4"No. 468-8" extension now unavailable.45-1/2 currently unavailable2100Right hand only asshown3/8"Aluminum Finish3718Right HandShown3/8"2-1/2"5"5/16" holeNo threads17319 Blaine DriveHagerstown, Md 217402-1/2"Sold with #303crank handle5-1/4"10-24ThreadedStudToll Free: 800-678-1919Fax: 888-250-3960Sold with#303 CrankHandle2-5/16"1-1/8"e-mail: info@blainewindow.comweb: www.blainewindow.comG5-63
Please send a sample foraccurate identification11.3011.1211.1012" arm16" arm21" armTruth Awning OperatorsTruth Part No.2-5/8"20008 eW hiteGoldW hiteBronzeBeigeBronzeGoldW 11.12.32.001Uses one hook*Order 10579.XX crankhandle separatelyNote:Bronze - Painted Finish11.142-5/8"20008 HookUses two hooksBlaine Part No.25"Arm Length: 1ArmLengthColor25"25"25"25"BrassGoldW hiteBronzeOrder 10579.XX crank handle separatelyNote:2-5/8"10.10 - 20"10.14 - 13"20008 HookUses one hookSpecify 13" or 20"*Measure the distancefrom the bottom of themounting plate to thebase (see drawingabove). Order theoperator by the letterdesignation thatcorresponds to themeasured distance.10.11C 3/4”E 1/2"F 3/8"Truth Part No.22-3/8"G5-64Blaine Part 0.10.37.00110.14.29.00110.10.03.001Trim Sill Gap3/4" C3/4" C3/4" C3/8" F1/2" E1/2" E1/2" E1/2" E1/2" E3/8" F3/8" FColorBronzeGoldBronzeBrassOff WhiteBrassGoldBronzeOff WhiteGoldBronzeArm Length13"20"20"13"13"20"20"20"20"13"20"Brass - Bright Plated Finish20008 HookUses two hooks*Measure the distance from thebottom of the mounting plate tothe base (see drawing above).Order the operator by the letterdesignation that corresponds tothe measured distance.Truth Wood Window Awning OperatorNote: Bronze - Painted Finish2-5/8"*Trim Sill GapBronze - Painted FinishBrass - Bright Plated FinishArm Length: 22-3/8"If Your Trim Sill Gap Measures:1" order cC 3/4" orderE 1/2" orderF 3/8" order17319 Blaine DriveHagerstown, Md 00310.11.29.00210.11.03.00110.11.32.001Toll Free: 800-678-1919Fax: 888-250-3960Trim Sill sBronzeGoldBronzeW hiteArm -3/8"e-mail: blainehdw@aol.comweb: www.blainewindow.com
Crestline No. 361 Gold Crank Handle Included 3/8” Crestline 14 tooth replacement gear for Crestline No. 2020 Operator Extra 14 Tooth Gears Also Available. Order 738. Covers no longer available. Now manufactured by Blaine 738 7/8" 2-7/8" 3-5/8" Peachtree Operator 10-24 Threaded Stud 2-1/2"
