EMC VNX SERIES UNIFIED STORAGE - Corporate Armor

Transcription

satSales@CorporateArmor.com.EMC VNX SERIES UNIFIED STORAGESYSTEMSEMC VNX series unified storage systems deliver uncompromising scalability andflexibility for the mid-tier while providing market-leading simplicity and efficiency tominimize total cost of ownership.VNX5200 VNX5400 VNX5600 VNX5800 VNX7600 VNX8000 SpecificationsARCHITECTUREBased on the powerful new family of Intel Xeon E5-2600 (Sandy Bridge) processors, theEMC VNX implements a modular architecture that integrates hardware components forblock, file, and object with concurrent support for native NAS, iSCSI, Fibre Channel, andFCoE protocols. The series delivers file (NAS) functionality via two-to-eight Data Moversand block (iSCSI, FCoE, and FC) storage via dual Storage Processors leveraging full 6 GbSAS disk drive topology. The system leverages the patented MCx multi-corestorage software operating environment that delivers unparalleled performanceefficiency. You can start with block or file functionality and easily upgrade to unifiedwhen needed. The unified configuration includes the following rack-mounted enclosures: Block Services: Disk processor enclosure (includes disk drives) or storageprocessor enclosure (no drives included) plus standby power system. Capacity forBlock or File use cases is added via Disk Array Enclosures (DAEs) File and Unified Services: One or more data mover enclosures and a controlstation to deliver file protocols.SPECIFICATION SHEET

satSales@CorporateArmor.com.VNX PHYSICAL /7504/10004/1500Max FASTCache600GB1TB2TB3TB4.2TB4.2TBArrayEnclosure3U Disk Processor Enclosure (Holds 25x2.5” SAS/Flash drives)Drive EnclosureOptions (DiskArrayEnclosure DAE)4U Storage ProcessorEnclosure(No drives)All models support 2U 25 drive trays for 2.5” SAS/Flash drivesAll models support 3U 15 drive trays for 3.5” SAS/Flash drivesN/AVNX5400 and above support 4U 60 drive trays for 3.5” SAS/Flash drivesStandby PowerSystemOn board batteries, one for each Storage ProcessorRaid Options0/1/10/3/5/6CPU/Memoryper Array2 x IntelXeon E52600 4-Core1.2 GHz /32GB2 x Intel XeonE5-2600 4-Core1.8 GHz /32 GB2 x Intel Xeon E52600 4-Core2.4 GHz /48 GB2 x Intel Xeon E52600 6-Core2.0 GHz /64 GB2 x Intel Xeon E52600 8-Core 2.2GHz/128 GB4 x Intel Xeon E52600 8- Core 2.7GHz/256 GBMax BlockUltraFlex IOModules perArray6810101022Embedded IOPorts per ArrayBase 6 Gb/sSAS BE Busesper Array4 x 4 lane SAS ports (for BE Connection02 x 4 Lane2 x 4 Lane2 x 4 Lane2 x 4 Lane2 x 4 Lane8 x 4 Lane2 x 4 Lane2 x 4 Lane6 x 4 Lane or2 x 4 Lane 2 x8 Lane6 x 4 Lane or2 x 4 Lane 2 x 8Lane6 x 4 Lane or2 x 4 Lane 2 x 8Lane16 x 4 Lane or8 x 8 Lane2836444444882/4/8 Gb/s FCMax Ports perArray2432404040721 GBaseT iSCSIMax Total Portsper Array16161616161610 GbE iSCSIMax Total Portsper Array121616161616Max FCoE TotalPorts per Array1216202020361-31-41-42-62-82-8Max 6 Gb/sSAS BE Busesper ArrayMax Total Portsper ArrayFILE COMPONENTS**# File DataMovers# ControlStationsData Mover:CPU/MemoryMax FileUltraFlex IOModules perData Mover***1 x 1U Server standard, 2nd x 1U Server optionalIntel Xeon5600/ 6 GBIntel Xeon 5600/ 6 GBIntel Xeon 5600/ 12 GBIntel Xeon 5600/ 12 GBIntel Xeon 5600/ 24 GBIntel Xeon 5600/ 24 GB333445

satSales@CorporateArmor.com.Min/Max 2/4/8Gb/s FC Portsper Data Mover444444888121216Max 1 GBaseTPorts per DataMover888121216Max 10 GbEPorts per DataMover444668Max IP Portsper Data MoverManagementLAN 2x 10/100/1000 Copper GbEFUNCTIONALLIMITSMax RawCapacity500 TB1,000 TB2,000 TB3,000 TB4,000 TB6,000 TBMax SAN Hosts1,0241,0241,0242,0484,0968,192Max Number ofPools151520404060Max Number ofLUNs (Pool)1,0001,0001,0002,0003,0004,000Max Number ofLUNs (Classic)204820482048409640968192256 TB(Virtual PoolLUN)256 TB (VirtualPool LUN)256 TB (VirtualPool LUN)256 TB (Virtual PoolLUN)256 TB (Virtual PoolLUN)256 TB (Virtual PoolLUN)16 TB16 TB16 TB16 TB16 TB16 TB256 TB256 TB256 TB256 TB256 TB256 TBMax Pool BasedLUN SizeMax FileSystem SizeMaximumUsable FileCapacity perData MoverOS SupportBlock OS’s see EMC E-Lab Navigator and NAS Support Matrix on EMC Powerlink * 60-Drive 4U DAE is a top-loading DAE and requires a high-density EMC rack.** The File components are not required when ordering a block-only system.*** Includes One UltraFlex IO Module per Data Mover reserved for connection to the captive array.Note: In-family Data-in-Place conversions, i.e. converting from a smaller VNX platform to a large one, are also supportedVNX CONNECTIVITYThe VNX series provides flexible connectivity options via UltraFlex IO modules for boththe file Data Movers for NAS connectivity and the block storage processors for FC andiSCSI host connectivity (see above table for number of modules supported per blade orSP).ULTRAFLEX IO MODULE OPTIONS (BLOCK)IO ModuleDescriptionFour-Port 8Gb/s FibreChannel ModuleFC module with four ports auto-negotiating to 2/4/8 Gbps;uses optical SFP and OM2/OM3 cabling to connect directly tohost HBA or FC switchFour-Port 1 Gb/s iSCSIModule with TOEiSCSI module with four 1 GBaseT RJ-45 copper connections toCat 6 cabling to Ethernet switch; includes TCP offload engineTwo-Port 10 Gb/s OptiSCSI Module with TOEiSCSI module with two 10 Gb/s Ethernet ports and choice ofSFP optical connection or active twinax copper connection toEthernet switch; includes TCP offload engineTwo-Port 10 GBASE-TiSCSI Module with TOEiSCSI module with two 10 GBaseT Ethernet ports with copperconnection to Ethernet switch; includes TCP offload engineTwo-Port 10 GbE FCoEModuleFCoE module with two 10 Gb/s Ethernet ports and choice ofSFP optical connection or active twinax copper connection toconverged enhanced Ethernet switch

satSales@CorporateArmor.com.Four-Port 6Gb/s SASV2.0 ModuleSAS module, used for back-end storage (DAE) connectivity toBlock Storage Processors. Each SAS port has 4 lanes/port @6Gb, delivering 24Gb/s nominal throughput and connects toPCI-E Gen3. Can be configured as 4x4x6 or 2x8x6.ULTRAFLEX IO MODULE OPTIONS (FILE)IO ModuleDescriptionFour-Port 1 GBASE-T IPModule10/100/1000 BaseT module with four ports supporting RJ-45copper connections to Cat 6 cabling to Ethernet switchTwo-Port 10 GbE OptIP ModuleIP module with two 10 Gb/s Ethernet ports and choice of SFP optical connection or active twinax copper connection toEthernet switchTwo-Port 10 GBASE-TIP ModuleIP module with two 10 GBaseT Ethernet ports with copperconnection to Ethernet switchFour-Port 8 Gb/s FibreChannel ModuleFC module with four ports auto-negotiating to 2/4/8 Gbps;uses optical SFP and OM2/OM3 cabling to connect directly tocaptive array and to provide NDMP tape connectionMAXIMUM CABLE LENGTHSShortwave optical OM2: 50 meters (8 Gb), 100 meters (4 Gb), and 300 meters (2 Gb)Shortwave optical OM3: 150 meters (8 Gb), 380 meters (4 Gb), and 500 meters (2 Gb)BACK-END (DISK) CONNECTIVITYEach storage processor connects to one side of each of two, four, eight or sixteen(depending on model) redundant pairs of four-lane x 6 Gb/s Serial Attached SCSI (SAS)buses, providing continuous drive access to hosts in the event of a storage processor orbus fault. VNX models require four “vault” drives (SAS or Near-line SAS) and support aplatform specific maximum number of disks (see VNX physical specifications tableabove). 300 GB per vault drive is consumed by VNX operating environment software anddata structures.DISK ARRAY ENCLOSURES15x3.5” Drive DAEDrive Types Supported2.5”2.5”3.5”2.5”3.5”Flash (in 3.5” carrier)15K Rotating (in 3.5” carrier)15K Rotating10K Rotating (in 3.5” carrier)Near-line Rotating60x3.5” Drive DAE2.5”2.5”2.5”3.5”Flash (in 3.5” carrier)15K Rotating (in 3.5” carrier)10K Rotating (in 3.5” carrier)Near-line Rotating25x2.5” Drive DAE2.5”2.5”2.5”2.5”Flash15K Rotating10K RotatingNear-line RotatingDrive MixingNo limitationsNo limitationsNo limitationsController Interface6 Gb SAS6 Gb SAS6 Gb SAS

satSales@CorporateArmor.com.DISK DRIVESNominalCapacity100GBSSD*200GBSSD *400GBSSD*800GBSSD*300 GB15KDrive300 GB15KDrive600 GB15KDrive600 GB10KDrive900 GB10KDrive1.2TB10KDrive2 TB7.2KDrive3 TB7.2KDrive4 Supportedin 15 driveDAE Supportedin 25 driveDAE Supportedin 60 driveDAE 10,000rpm7,200rpm7,200rpm7,200rpmInterface6 GbSAS6 GbSAS6 GbSAS6 GbSAS6 GbSAS6 GbSAS6 GbSAS6 GbSAS6 GbSAS6GbSAS6 GbSAS6 GbSAS6 GbSASDataBufferN/ASSDN/ASSDN/ASSDN/ASSD16 MBmin16 MBmin16 MBmin16 MBmin16 MBmin16 MBmin16 MBmin16 MBmin16 6msec4.16msec4.16msecACCESS TIMENOMINAL POWER CONSUMPTION .65.612.212.212.2Idle Mode5.55.55.55.58.745.2511.683.13.13.18.08.08.0* 100GB and 200GB SSDs are available in SLC or eMLC technology. 400GB and 800GB SSD are eMLC technology. eMLC can only be used in FAST VPuse cases.** 520 bytes/sector, 1 MB 1,048,576 bytes

satSales@CorporateArmor.com.VNX OE PROTOCOLS AND SOFTWARE FACILITIESThe VNX series offers support for a wide variety of protocols and advanced featuresavailable via various software suites and packs.PROTOCOLS AND FACILITIES SUPPORTED Access-based Enumeration (ABE) for Microsoft Windows Server 2003 Address Resolution Protocol (ARP) Automated Volume Management (AVM): file system provisioning Block Protocols: iSCSI, Fibre Channel (FCP SCSI-3), and FCoE Common Criteria Certification: EAL 2 FLR Assurance Level Controller based Data at Rest Encryption (D@RE) DFS Distributed File System (Microsoft) as Leaf node or Root Server Ethernet Trunking File Protocols: NFSv2, v3, v4, and v4.1 with pNFS; CIFS (SMB 1, SMB 2 and SMB3); FTP (including SFTP and FTPs) FileMover API: Open API for automated, transparent data movement between tiersof the storage network Lock Manager (NLM) v1, v3, and v4 Failsafe Networking Internet Control Message Protocol (ICMP) Kerberos Authentication Lightweight Directory Access Protocol (LDAP) LDAP signing for Windows Link Aggregation (IEEE 802.3ad) Management Port IPv4 and/or IPv6 Network Data Management Protocol (NDMP) v1-v4 Network Information Service (NIS) Client Network Status Monitor (NSM) v1 Network Time Protocol (NTP) client NT LAN Manager (NTLM) Object support via EMC Atmos Virtual Edition Portmapper v2 Restriction of Hazardous Substances (RoHS) compliance Routing Information Protocol (RIP) v1-v2 Simple Network Management Protocol V1-V3 (SNMP) Simple Network Time Protocol (SNTP) UNIX archive utilities (tar/cpio) Virtual Data Movers for Microsoft Windows clients Virtual LAN (IEEE 802.1q)

satSales@CorporateArmor.com.VNX SOFTWAREVNX5200, VNX5400, VNX5600, VNX5800, VNX7600 AND VNX8000Simple, intuitivemanagement, monitoring andtroubleshooting for VNXManagement Software includes:Unisphere element manager (Block / File / Unified)Unisphere Central (consolidated dashboard and alerting)Unisphere Analyzer (monitoring and troubleshooting)Unisphere QoS Manager (Quality of Service)VNX Monitoring and Reporting (SRM Lite for VNX)ProtocolsCIFS, NFS, pNFS, FC, FCoE, iSCSI includedBase Software (VNX OE)Includes:All Protocols (See above)Thin ProvisioningFixed Block Deduplication (Block Use Case)Block CompressionFile Deduplication and CompressionSAN CopyUnisphere ManagementSuite:Core storage capabilities(connectivity, efficiency andmigration) included at noextra costFAST Suite: Automaticallyoptimize for the highestsystem performance and thelowest storage costsimultaneouslyOptimize performance and cost concurrently with:Events and RetentionSuite: Keep data safe fromchanges, deletions, andmalicious activityDisk-based WORM functionalityLocal Protection Suite:Practice Safe Data Protectionand RepurposingBlock storage snaps and clonesRemote Protection Suite:Protect data against localizedfailures, outages, anddisastersUnified storage replication with DVR-like recoveryApplication ProtectionSuite: Automate applicationcopies and prove complianceSelf-service application copy managementStorage AnalyticsVMware vRealize Operations for VNX/VNXe3200, EMC Adapter forVNX (supports VMAX and VPLEX)Total Protection PackLocal Protection Suite - Dynamic tiering of data across drives- Extendable cache for performance boostAnti-virus integration and alertingContinuous Data Protection for DVR-like recovery for block storageFile system snapsIntegrated WAN deduplication and bandwidth reductionGranular file system level replication and recoveryProve protection complianceIncludes Replication Manager and AppSync Remote Protection Suite Application Protection SuiteTotal Efficiency PackFAST Suite VNX Events & Retention Suite Local Protection Suite Remote Protection Suite Application Protection SuiteEncryptionController based, Data at Rest Encryption (D@RE)NOTE: For more details on software licensing, please contact your sales representative.

satSales@CorporateArmor.com.VIRTUALIZATION FACILITIES AND TITLESThe VNX series offers support for a wide variety of protocol and advanced featuresavailable via various software suites and packs including but not limited to: EMC Virtual Storage Integrator (VSI) for VMware vSphere 5: For provisioning,management, cloning, and deduplication Site Recovery Manager (SRM) Integration: Managing failover and failback makingdisaster recovery rapid and reliable Virtualization API Integration: VMWare: VAAI and VASA. Hyper-V: Offloaded DataTransfer (ODX) and Offload Copy for File AppSync: Host-based, service oriented management of array-based copies of dataEMC Storage Integrator (ESI) – For provisioning within the Microsoft managementcontext (Systems Center) for Hyper-V and SharePointADDITIONAL OPTIONAL EMC TITLES EMC VIPR SRM Suite : VNX integration with EMC Storage managementinfrastructure EMC PowerPath : path management EMC Cloud Tiering Appliance (CTA and CTA/VE): policy-based cloud tiering, filearchiving, and migration

satSales@CorporateArmor.com.VNX ELECTRICAL SPECIFICATIONS(All power numbers are based on maximum configurations. For configuration specificpower specifications please refer to the EMC Power Calculator atpowercalculator.emc.com with your Powerlink account.)DPE / SPE / DAE 00SPE15x3.5”Disk ArrayEnclosure60x3.5”Disk ArrayEnclosure25x2.5”Disk ArrayEnclosurePOWEREnergy StarCertifiedAC atingmaximum)Power FactorHeatDissipation(operatingmaximum)Yes**4.3A max at200 Vac8.0 A max at100V*4.3 A max at200 Vac8.0 A max at100V*860 VA(835 W) max(200V)860 VA(835 W) max(200V)798 VA(768 W) max(100V*)798 VA(768 W) max(100V*)0.97 min at200V at fullload, lowvoltage0.97 min at200V at fullload, lowvoltage0.96 min at100V* at fullload, lowvoltage0.96 min at100V* at fullload, lowvoltage3.01 x 106J/hr, (2,850Btu/hr) max(200V)3.01 x 106J/hr, (2,850Btu/hr) max(200V)2.77 x 106J/hr, (2,621Btu/hr) max(100V*)2.77 x 106J/hr, (2,621Btu/hr) max(100V*)Yes**4.4 A maxat 200 Vac4.4 A maxat 200 Vac4.5 A max at200 Vac7.25 A maxat 200 Vac2.8 A maxat 100 Vac,1.4 A maxat 200 Vac6.0 A maxat 200 Vac2.5 A maxat 100 Vac,1.3 A maxat 200 Vac870 VA(845W)max870 VA(845 W)max905 VA(880 W)max1,450 VA(1,380 W)max280 VA(235 W)max1,200 VA(1,130 W)max250 VA(230 W)max0.98 min atfull load,low voltage0.98 min atfull load, lowvoltage0.98 min atfull load, lowvoltage0.98 min atfull load,low voltage0.98 min atfull load,low voltage0.98 min atfull load,low voltage0.98 min atfull load,low voltage3.04 x 106J/hr, (2,890Btu/hr) max3.04 x 106J/hr, (2,890Btu/hr) max3.17 x 106J/hr, (3,010Btu/hr) max4.97 x 106J/hr, (4,710Btu/hr)max8.46 x 105J/hr, (800Btu/hr)max4.07 x 106J/hr, (3,860Btu/hr)max8.28 x 105J/hr, (785Btu/hr)max50 A maxfor ½ linecycle, perline cord at240 Vac30 A maxfor ½ linecycle, perline cord at240 Vac50 A maxfor ½ linecycle, perline cord at240 VacIn-rushCurrent30 A max for½ line cycle,per line cordat 240 Vac30 A max for½ line cycle,per line cordat 240 Vac30 A maxfor ½ linecycle, perline cord at240 Vac30 A maxfor ½ linecycle, perline cord at240 Vac30 A max for½ line cycle,per line cordat 240 Vac30 A maxfor ½ linecycle, perline cord at240 VacStartupSurgeCurrent29 A rms maxfor 50 ms, atany linevoltage29 A rms maxfor 50 ms, atany linevoltage29 A rmsmax for 50ms, at anyline voltage29 A rmsmax for 50ms, at anyline voltage29 A rmsmax for 50ms, at anyline voltage29 A rmsmax for 50ms, at anyline voltage10.6 A rmsmax for 100ms, at anyline voltage27 A rmsmax for 100ms, at anyline voltage10.6 A rmsmax for 100ms, at anyline voltage10 A fuse oneach powersupply10 A fuse oneach powersupply10 A fuseon eachpowersupply10 A fuse oneach powersupply10 A fuse oneach powersupply10 A fuseon eachpowersupply10 A fuseon eachpowersupply,both phases12 A fuseon each linecord, bothphases10 A fuseon eachpowersupply,both phasesIEC320-C14appliancecoupler, perpower zoneIEC320-C14appliancecoupler, perpower zoneIEC320-C14appliancecoupler, perpower zoneIEC320-C14appliancecoupler, perpower zoneIEC320-C14appliancecoupler, perpower zoneIEC320-C14appliancecoupler, perpower zoneIEC320-C14appliancecoupler, perpower zoneIEC320-C14appliancecoupler,two perpower zoneIEC320-C14appliancecoupler, perpower zone12 ms min12 ms min12 ms min12 ms min12 ms min12 ms min30 ms min30 ms min30 ms minACProtectionAC InletTypeRide-through25 A maxfor ½ linecycle, perline cord at120 Vac25 A maxfor ½ linecycle, perline cord at120 Vac

satSales@CorporateArmor.com.Time 5 percentof full load,betweenpowersupplies 5 percent offull load,betweenpowersupplies 5 percentof full load,betweenpowersupplies 5 percentof full load,betweenpowersupplies 5 percentof full load,betweenpowersupplies 5 percentof full load,betweenpowersupplies 10percent offull load,betweenpowersupplies 10percent offull load,betweenpowersupplies 10percent offull load,betweenpowersuppliesWeight41 kgs(90.395 lbs)41 kgs(90.395 lbs)41 kgs(90.395 lbs)41 kgs(90.395 lbs)41 kgs(90.395 lbs)49.9 kgs(110 cal size3 NEMA units3 NEMA units3 NEMAunits3 NEMAunits3 NEMAunits4 NEMAunits3 NEMAunits4 NEMAunits2 NEMAunitsHeight13.33 cm(5.25 in)13.33 cm(5.25 in)13.33 cm(5.25 in)13.33 cm(5.25 in)13.33 cm(5.25 in)17.78 cm(7.00 in)13.33 cm(5.25 in)17.78 cm(7.00 in)8.76 cm(3.45 in)Width44.45 cm(17.5 in)44.45 cm(17.5 in)44.45 cm(17.5 in)44.45 cm(17.5 in)44.45 cm(17.5 in)44.45 cm(17.5 in)44.45 cm(17.5 in)44.45 cm(17.5 in)61.0 cm (24in)61.0 cm (24in)61.0 cm (24in)61.0 cm (24in)61.0 cm (24in)83.8 cm(33 in)35.56 cm(14 in)44.45 cm(17.5 in)35 in cablemgmt. arm(needs 44indeep rack)CurrentSharingDIMENSIONSDepth33.02 cm(13 in)*Please note that there is a 100-120V power supply option available for the 5200 and 5400. These systems must have the correct power supplyinstalled to operate at 100V-120V. Please be aware that with the 100V-120V power supply option, 10GBaseT block UltraFlex IO modulesare not supported.**Restrictions apply to the use of Near Line SAS drivesNOTE: Each VNX8000 SPE requires a Standby Power Supply (see the following information)VNX 8000 Standby Power SupplyPOWER2.2KW 2U SPS (Note all ratings assume fullyconfigured systems)AC Line Voltage2

specification sheet -vy tvyl pumvyth[pvu wslhzl jhss vy lthps \z h[ :hslz'*vywvyh[l(ytvy jvt vnx physical specifications. block components . vnx5200 vnx5400 vnx5600 vnx5800 vnx7600 vnx8000 . min/max drives .