Transcription
I n s t r u m e n t s f o r D e n ta l I m p l a n t s
589 Davies DriveYork, PA 17402toll-free phone 866-854-8300toll-free fax 866-854-8400phone 717-840-9335fax 717-840-9347email surgical@miltex.comwww.miltex.com
Miltex Inc., Instruments for dental implants are made of high quality stainless steel.Our line of instruments include, but is not limited to, the following products:Bone Grafting Instruments Bone Curettes (SPRATT) – designed for harvesting bone Bone Grinder – used in conjunction with a mallet to grind bone into appropriate particle sizes Bone Basin – weighted bottom design prevents tipping or spilling while mixing bone or otherbone grafting materials Bone Compactors – feature serrated tips for compacting boneScalpels & Biopsy Punches Scalpels – offers convenience of a disposable with razor sharp cutting edge for superior cutting Biopsy Punches – designed at a steeper angle to ensure a finely honed, sharper edgeBone Spreading Chisels Freer Chisels – double or single cut tips used for widening ridges during implant preparations Graduated Chisels – feature reference markings for measurement during a bone ridgeaugmentation and are available in straight and curved patternsOsteotomes Concave Osteotomes – break the floor of the maxillary sinus through the implant cavity and areavailable in curved (off set) and straight (with or without stops) Convex Osteotomes – raise the floor of the maxillary sinus and are available in curved (off set)and straight patterns (with or without stops) Progressive Osteotomes – designed to prepare the implant site in the maxillary area wherebone density is 3 or 4 Bone Spreading Osteotomes – sharp or blunt configurations for progressive circumferentialexpansion of the implant siteSinus Lift Instruments Sinus Lift Curettes and Elevators – lightweight, wide diameter stainless steel hand instrumentslift the sinus membrane for bone augmentation proceduresGauges & Calipers Gauges & Calipers – various measuring devices available to determine appropriate length,width, and distance for implant proceduresCollagen Products Collagen wound dressing product offering includes HeliCote , HeliPlug and HeliTape products.Sterilization Trays Sterilization Trays – designed to protect and store instruments during sterilization, transportationand storage
table of contents1. Scalpels & Biopsy Punchesa.b.c.d.e.f.Scalpel Handels & Blades .4Disposable Scalpels .5Safety Scalpels . .6Biopsy Punch .6Short Handled Biopsy Punch .7Biopsy Punch with Plunger.72. Calipers & Gaugesa. Dividers & Gauges .8b. Calipers .9c. Gauges .93. Bone Graftinga.b.c.d.e.f.g.h.i.j.k.l.m.Tatum Bone Spreaders.10Bone Block Clamp.10Bone Curettes.11Bone Harvesters.11Bone Mills.12Bone Grinder.12Mallets.13Bone Basin.13Graft Syringes.13Bone Tamper.14Bone Compactor.14Graft Material Spoons.15Graft/Membrane Forceps.154. Chiselsa. Graduated . .16b. Freer .165. Osteotomesa.b.c.d.e.Osteotome .17Progressive .17Convex with Stops .18Concave with Stops .18Convex .196. Sinus Lift Instrumentsa. Elevators .20b. Curettes .207. Collagen Productsa. HeliTape , HeliCote & HeliPlug . . 218. Sterilization Traysa. Sterilization Trays .229. Referencea.b.c.d.Collagen Instuctions.23Sterilization Tray Instructions .24Alphabetical Index .25Numerical Index .26
B la d es a n d S calpel H a n d lesscalpel handlesREF4-7For your convenience, Miltex, Inc., offers a wide arrayof scalpel blade handles. Miltex Blade Safe Remover4-7Raids in the safe removal of blades and helps protect4-8against accidental cuts and 100For BladesDescription10-15CNo. 3, Stainless Steel 5”xgraduated in mm and cmNo. 3, Nickel 5”xgraduated in mm and cmNo. 4, Stainless Steel 5.375”graduated in mm and cmNo. 4, Nickel 5.375”graduated in mm and cmNo. 7, Stainless Steel 6.5”xNo. 9, Stainless Steel 4.5”xSIEGEL, Stainless Steel,xround handle, 6”No. 5, plastic handle withxstainless tip 5”, greenNo. 6, plastic handle withstainless tip 5.25”, redNo. 3, E-Z-Off Reusable Plastic xSurgical Knife Handles, 5.5”, grayNo. 4, E-Z-Off Reusable PlasticSurgical Knife Handles, 5.5”, blueBlade-Safe Surgical Blade RemoverFor Blades20-25xxxx* E-Z-OFF reusable plastic knife handles are autoclavable andpermit quick and safe removal of blade; 4-204-304-31
Disposable S u rgical B la d es & S calpelssterile disposable surgical bl adesCarbon Steel (CS) or Stainless Steel (SS) Razor-sharp cutting edges for superior cutting and clean incisions Sterile, 5-year shelf life Individually packaged in foil peel packs Convenience of disposables, single-use Sizes clearly marked on each blade Each box contains 100 5202122232510111212B1515C2021222325FAC T:Carbon steel surgical blades are sharperthan stainless steel surgical blades butmay dull more quickly .* Double-edged blade** Angled bladesterile disposable scalpels Razor-sharp cutting edges for superior cuttingand clean incisions Safety sleeve for blade protects you andthe blade4-4104-4204-4114-4214-4124-4224-4154-423 Sterile, 5-year shelf life Individually packaged in sealedpeel-apart pouches Convenience of disposables, single-use Sizes clearly marked on each blade Each dispenser box contains 10 3Size1011121520212223www.miltex.com5
Disposable S calpels & P u n chessterile disposable safet y scalpels Complies with OSHA directive for the Needlestick Safety& Prevention Act Stainless steel, razor-sharp cutting edge for superior cutting andclean incisions4-510 Pre-assembled, fully retractable scalpel blade is user activated4-511 Sterile, 5-year shelf life Individually packaged in sealed peel-apart pouches Convenience of disposables, single-use4-512 Metric ruler on each scalpel to assist in determining incision length Sizes clearly marked on each scalpel blade Each dispenser box contains 10 safety scalpels4-515 Six sizes 1121515C224-515C4-522ste rile disposable bi opsy Punch es Seamless, stainless steel, razor-sharp cutting edge Ribbed handle provides better comfort and control Sterile, 5-year shelf -3233-37 Individually packaged in color-coded blister packs Convenience of disposables, single-use Sizes clearly marked on handle of each 3533-3633-3733-386SizeQuantity1.0 mm50/box1.5 mm50/box2.0 mm50/box2.5 mm50/box3.0 mm50/box3.5 mm50/box4.0 mm50/box5.0 mm50/box6.0 mm50/box8.0 mm50/boxAssorted sizes, 10 each of 2.0 mm,3.0 mm, 4.0 mm, 5.0 mm, 6.0 mmwww.miltex.com
biops y p u n chesste rile disposable bi opsyPunches with plungers Effortless ejection of lodged specimens Same features as standard sterile disposablebiopsy punches33-31AA-P/25 Color-coded by size – 5 sizes 1-P/2533-32-P/2533-34-P/2533-31-P/25Size1.0 mm w/plunger1.5 mm w/plunger2.0 mm w/plunger3.0 mm w/plunger4.0 mm 32-P/2533-34-P/25Sh o rt Handled Bi opsy punch Same razor-sharp blade as the original Miltex biopsy punches Shortened handle to allow access in hard to reach posterior areasActual Size!1-1/16” Length of the instrument is a mere 1-1/16 inch Sterile, individually wrapped packets for easy use Available in the four most common sizes:3.5 mm, 4 mm, 5 mm and 6 mm.REF33-33-SH33-34-SH33-35-SH33-36-SH3.5 mm4 mm5 mmDescriptionShort Handled Biopsy Punch, 3.5 mmShort Handled Biopsy Punch, 4 mmShort Handled Biopsy Punch, 5 mmShort Handled Biopsy Punch, 6 mmQuantity50/box50/box50/box50/box6 mmwww.miltex.com7
Dividers & GaugesDI V IDERS & G AU G n Gauge, stainless steelBOLEY Gauge, stainless steelSpring Bow Divider, 4-1/2” (11.4 cm) radiusSpring Bow Divider, 6” (15.2 cm) radiusMicro BOLEY Gauge, stainless steel, measures tooth dimension& interdental space, 0-95 mm 68-696
Calipers & GaugesCalipers Used as measuring instruments in preparationfor an implant procedure Designed to find the depth, width and spacebetween teeth which may be required forvarious dental proceduresREF68-69868-699DescriptionRidge Mapping CaliperCastroviejo Caliper, 0-40 mm, Short, Depth Gauge Ball Tip, marks at 7, 8 ,10, 13, 15,18 and 20 mmImplant Depth Gauge, marks at 7, 8 ,10, 13, 15,18 and 20 mm62-17062-171www.miltex.com9
bone graftingBone Spreaders62-30* Useful to wedge donor block grafts fromthe chin and ramus 6-1/8" (15.6 cm) overall instrument m “D” Shaped Spreader #1, 3.5 mm widestpart of tip (13-16-19 mm markings)Tatum “D” Shaped Spreader #2, 4.4 mm widestpart of tip (13-16-19 mm markings)Tatum “D” Shaped Spreader #3, 5.3 mm widestpart of tip (13-16-19 mm markings)Tatum “D” Shaped Spreader #4, 8.3 mm widestpart of tip (13-16-19 mm markings)62-32*Marked at 13, 16 & 19 mm62-33**Tips shown actual sizeBone Block Clamp Features precision ratchets to securely holdthe bone block in place while minimizing thechance of block breakage Aperture allows for screws to be placedwhile holding boneREF62-8027-2462-80DescriptionPosterior Angled Bone Block ClampAnterior Bone Block Clamp Forceps27-2410www.miltex.com
Bone GraftingBone CurettesMiltex Bone Curettes can be used for harvesting boneREF19-70019-70219-70419-706DescriptionBRUN (SPRATT) Curette, 6-1/2” (16.5 cm), size 5/0 (2 x 3.5 mm)BRUN (SPRATT) Curette, 6-1/2” (16.5 cm), size 4/0 (2.5 x 4 mm)BRUN (SPRATT) Curette, 6-1/2” (16.5 cm), size 3/0 (3 x 4.5 mm)BRUN (SPRATT) Curette, 6-1/2” (16.5 cm), size 2/0 (3.5 x 5 mm)5/019-7024/019-70019-7043/0Bone Harvesters19-7062/062-75 Used to shave a thin layer of bone from adonor site Harvesters are not used for synthetic ornon-bone graft material62-75A Replacement blades iptionBone Harvester, 30 Angled “Up” HandleBone Harvester Replacement Blade for 62-75Bone Harvester, Straight HandleBone Harvester Replacement Blade for 62-76Bone Harvester, 30 Angled “Down” HandleBone Harvester Replacement Blade for 62-7762-7662-76A62-7762-77Awww.miltex.com11
bone graftingBone Mills Useful for crushing/grinding largerbone fragments into smaller particlesfor grafting purposes Available in table top and handheldversions.REF62-7862-79DescriptionBone Mill - large table top modelBone Mill - handheld model62-7862-79Bone grinder Reduces bone/graft material particle size Made of quality German stainless steel1. Place harvested bone in well of instrument2. Cover bone with top, serrated side down3. Use mallet to reduce bone to desired particle sizeREF62-70DescriptionBone Grinder, 2” (5.1 cm) diameter62-7012www.miltex.com
Bone scriptionGERZOG Mallet, 7-1/2” (19.7 cm), head 8 oz.(227g) lead filled with stainless jacketMILTEX Mallet, 7-1/2” (19.1 cm), lightweight 7.5 oz.(213g), sainless head 1” diameter with 2 replaceable nylon capsNylon Cap Replacement, for nos. 19-793 and 19-794 MalletsMEAD Mallet, 7-1/2” (19.1 cm), head 8 oz.(227g), with 2 replaceable nylon capsNylon Cap for no. 19-796 Mallet19-79319-79019-796Bone Basin Stainless steel deep dish with weighted bottom toprevent tipping Holds 20 grams of wetted material AutoclavableREF62-71DescriptionBone Basin62-71Graft Syringes Stainless steel syringe designed to loadsyringe from the tip to reduce clogging “Tamp and pack” method for placement ofgraft material into oral cavityREF62-7262-7362-74Description3.5 mm Graft Syringe; holds approx. 1.6 cc4.5 mm Graft Syringe; holds approx. 2.1 cc6.0 mm Graft Syringe; holds approx. 2.8 cc3.5 mm62-724.5 mm62-7362-746.0 mmwww.miltex.com13
bone graftingBone TampersMiltex Bone Tampers feature a serrated tip forcompacting bone or graft materialREF62-6262-63Description4 mm Bone Tamper7 mm Bone Tamper62-6262-63Bone Compactors Packs down graft material Features a serrated tip and bent angleto reach difficult areasREF62-6062-6162-60DescriptionBone Compactor, 3/4 mmBone Compactor, 6/8 mm62-6114www.miltex.com
bone graftingGraft Material SpoonsMiltex Graft Material Spoons are used formixing/preparation of graft material for boneaugmentation proceduresREF62-5062-5162-52DescriptionBone Graft Material SpoonGraft Material spoon with3 mm serrated graft packerGraft Material spoon with4 mm serrated graft packer62-5062-5162-52Graft/Membrane Forceps Designed for precise placement and manipulationof membranes Serrated tip mbrane Forceps with DelicateRing Tip, 10 cmTissue Graft ForcepsMembrane Placement InstrumentMembrane Forceps “Smooth Tip”62-5662-5762-58www.miltex.com15
chiselsGraduated Chisels Feature reference graduation marks used to precisely widen ridges Available in a straight or curved patternREF62-2062-2162-2262-23DescriptionChisel, Graduated, Straight, 3.8 mm (7-10-13-15-18 mm markings)Chisel, Graduated, Curved, 3.8 mm (7-10-13-15-18 mm markings)Chisel, Graduated, Straight, 7.5 mm (7-10-13-15-18 mm markings)Chisel, Graduated, Curved, 7.5 mm (7-10-13-15-18 mm -4462-4562-21Freer Chisels Feature an extremely sharp tip to ease incision andwidening of ridges Available in a single or double edge riptionChisel, Freer, Single Cut Blade, 2 mmChisel, Freer, Single Cut Blade, 4 mmChisel, Freer, Single Cut Blade, 6 mmChisel, Freer, Double Cut Blade, 2 mmChisel, Freer, Double Cut Blade, 4 mmChisel, Freer, Double Cut Blade, 6 mmSingle DoubleBlade Blade16www.miltex.com62-4162-4062-4262-43
osteotomesOsteotomesMiltex Osteotomes are specially designed for progressive circumferential (circular) expansion of the implant bed in alveolarridges with reduced 2-106DescriptionOsteotome, Sharp, 2 mm (8-12-18 mm markings)Osteotome, Sharp, 2.7 mm (8-12-18 mm markings)Osteotome, Sharp, 3.25 mm (8-12-18 mm markings)Osteotome, Sharp, 3.8 mm (8-12-18 mm markings)Osteotome, Blunt, 3 mm (5-10-15-20 mm markings)Osteotome, Blunt, 4 mm (5-10-15-20 mm markings)Osteotome, Blunt, 5 mm (5-10-15-20 mm 4Progressive OsteotomesMiltex Progressive Osteotomes shown here can be usedto prepare the implant site in maxillary areas with bonedensities 3 or onOsteotome, Progressive, Concave, 1.6 mm(7.5-9-15.5 mm markings)Osteotome, Progressive, Concave, 1.9 mm(7.5-9-13.5-15.5 mm markings)Osteotome, Progressive, Concave, 2.8 mm(7.5-9-10.5-13.5-15.5 mm markings)Osteotome, Progressive, Concave, 3.1 mm(7.5-9-10.5-13.5-15.5 mm markings)Osteotome, Progressive, Concave, 3.9 mm(10-11.5-13 mm markings)Osteotome, Progressive, Concave, 5.5 mm(10-13 mm iltex.com17
osteotomesConvex Osteotomes with stops Used to raise the floor of the maxillary sinus Available in straight or curved (off-set) patterns Stops are convenient for maintaining properdistance in 62-14662-147DescriptionOsteotome with Stop, Convex, Straight, 2 mm(6-11-15 mm markings)Osteotome with Stop, Convex, Straight, 3 mm(6-11-15 mm markings)Osteotome with Stop, Convex, Straight, 3.3 mm(6-11-15 mm markings)Osteotome with Stop, Convex, Straight, 4 mm(6-11-15 mm markings)Osteotome with Stop, Convex, Curved, 2 mm(6-11-15 mm markings)Osteotome with Stop, Convex, Curved, 3 mm(6-11-15 mm markings)Osteotome with Stop, Convex, Curved, 3.3 mm(6-11-15 mm markings)Osteotome with Stop, Convex, Curved, 4 mm(6-11-15 mm 062-144Concave Osteotomeswith stops Concave osteotomes break the floor of the maxillarysinus through the implant cavity Concave tips also allow for introduction of graft material Available in straight or curved (off-set) 15462-155DescriptionOsteotome with Stop, Concave, Straight, 2 mm(6-11-15 mm markings)Osteotome with Stop, Concave, Straight, 3 mm(6-11-15 mm markings)Osteotome with Stop, Concave, Straight, 3.3 mm(6-11-15 mm markings)Osteotome with Stop, Concave, Straight, 4 mm(6-11-15 mm markings)Osteotome with Stop, Concave, Curved, 2 mm(6-11-15 mm markings)Osteotome with Stop, Concave, Curved, 3 mm(6-11-15 mm markings)Osteotome with Stop, Concave, Curved, 3.3 mm(6-11-15 mm markings)Osteotome with Stop, Concave, Curved, 4 mm(6-11-15 mm 1481862-15062-15262-154
osteotomesConvex Osteotomeswithout stops Used to raise the floor of the maxillary sinus afterfracturing Available in straight or curved (off-set) iptionOsteotome, Straight, 2.2 mm(6-8-10-12-14-16 mm markings)Osteotome, Straight, 2.5 mm(6-8-10-12-14-16 mm markings)Osteotome, Straight, 2.8 mm(6-8-10-12-14-16 mm markings)Osteotome, Straight, 3.1 mm(6-8-10-12-14-16 mm markings)Osteotome, Straight, 3.5 mm(6-8-10-12-14-16 mm markings)Osteotome, Straight, 3.8 mm(6-8-10-12-14-16 mm markings)Osteotome, Straight, 4.1 mm(6-8-10-12-14-16 mm markings)Osteotome, Curved, 2.2 mm(6-8-10-12-14-16 mm markings)Osteotome, Curved, 2.5 mm(6-8-10-12-14-16 mm markings)Osteotome, Curved, 2.8 mm(6-8-10-12-14-16 mm markings)Osteotome, Curved, 3.1 mm(6-8-10-12-14-16 mm markings)Osteotome, Curved, 3.5 mm(6-8-10-12-14-16 mm markings)Osteotome, Curved, 3.8 mm(6-8-10-12-14-16 mm markings)Osteotome, Curved, 4.1 mm(6-8-10-12-14-16 mm tex.com19
sinus lift instrumentsSinus Elevators Used to aide in the lifting up of the sinus cavityfor implant site preparation Elevators feature a more round, smooth tip forlifting the sinus with minimal puncture tionElevator, Sinus, Lift No. 1Elevator, Sinus, Lift No. 2Elevator, Sinus, Lift No. 3Elevator, No. B1Elevator, No. B2Elevator, No. B362-18062-18162-18262-18362-18462-185Sinus CurettesMiltex Sinus Curettes feature a cuttingedge for scraping purposes, but can alsobe used to lift sinus in preparation forimplant 62-19662-197DescriptionCurette, Sinus, Lift No. 1Curette, Sinus, Lift No. 2Curette, Sinus, Lift No. B1Curette, Sinus #1Curette, Sinus #4Curette, Sinus #5Curette, Sinus, Mills #2Curette, Sinus, Mills -19562-1
Miltex Inc., Instruments for dental implants are made of high quality stainless steel. . d I S P O S AB L E S u R G I CA L B L Ad E S & S CA L P E L S sterile disposaBle surGical Blades carbon steel (cs) or stainless steel (ss) Razor-sharp cutting edges for superior cutting and clean incisions
