Transcription
CAPS, PLUGS& NETTING
TAPERED CAPS & PLUGS. 24-27PUSH-FIT CAPS . 28-32PUSH-FIT CAPS FOR THREADS . 33-38THREADED CAPS . 39-40PUSH-FIT PLUGS .41-44SHEET METAL PLUGS . 45-46CONNECTOR PLUGS . 47PACKAGING TUBE PLUGS . 48PUSH-FIT PLUGS FOR THREADS . 49-52FLUID ABSORPTION PLUGS . 53THREADED PLUGS .54-61TPROPANE VALVE PRODUCT CAPS & PLUGS. 62NETTING . 63–7026A–8028A–9030A–10035AAPPLICATION WIZARDS. 64-65CAPS, PLUGS& NETTING23
CAPS, PLUGS & NETTINGTAPERED CAPS & PLUGSNumbered/GP SeriesTapered Caps or PlugsSpecifications: Material: Low-Density Polyethylene Color: See TableTo Assure Proper Fit:Features: The tapered design allows the part to plug multiple innerdiameters or cap multiple outside diameters Protects against damage, dirt, moisture and corrosion duringstorage and shipping GP series parts have a heavy duty design which includes arugged wall and seal rings for maximum protectionPlugsCapsSee pages 64 and 65 for Application WizardsUse as a PlugAItem No.Cap dimension “E” should beapprox. 1% smaller than theoutside diameter of the part.Minimum of .020"Plug dimension “A” should beapprox. 1% larger than theinner diameter of the part.Minimum of .020"Use as a d on next page )24tel 800 847 0486fax 866 561 6617
CAPS, PLUGS & NETTINGTAPERED CAPS & PLUGSNumbered/GP SeriesTapered Caps or Plugs (continued)To Assure Proper Fit:PlugsCapsSee pages 64 and 65 for Application WizardsUse as a PlugAItem No.Cap dimension “E” should beapprox. 1% smaller than theoutside diameter of the part.Minimum of .020"Plug dimension “A” should beapprox. 1% larger than theinner diameter of the part.Minimum of .020"Use as a 000600(Continued on next page )email sales@essentracomponents.comweb www.essentracomponents.com25
CAPS, PLUGS & NETTINGTAPERED CAPS & PLUGSNumbered/GP SeriesTapered Caps or Plugs (continued)To Assure Proper Fit:PlugsCapsSee pages 64 and 65 for Application WizardsUse as a PlugAItem No.26Cap dimension “E” should beapprox. 1% smaller than theoutside diameter of the part.Minimum of .020"Plug dimension “A” should beapprox. 1% larger than theinner diameter of the part.Minimum of .020"Use as a 6tel 800 847 0486fax 866 561 03001001001001006050505010050754040303030
CAPS, PLUGS & NETTINGTAPERED CAPS & PLUGSLF SeriesWide Flange Caps or PlugsDECB AFGSpecifications: Material: Low-Density Polyethylene Color: See TableToAssureAssureProperProperFit:Fit:ToFeatures: Wider flange assures added protection on bearing surfaces Wider flange keeps plug from being accidently pushed down throughthe mating part The tapered design allows the part to plug multiple inner diameters orcap multiple outside diametersPlugsUse as a 9019.5026.0029.26CapsPlug dimension “A” should beapprox. 1% larger than theinner diameter of the part.Minimum of 532.0552.323Use as a 9.002.531Cap dimension “E” should beapprox. 1% smaller than theoutside diameter of the part.Minimum of 500300250MASKINGPLUGSFREE SAMPLESTemperatureprotection up toSee our full range of Masking Solutions on page 66email sales@essentracomponents.com600 Fweb www.essentracomponents.com27
CAPS, PLUGS & NETTINGPUSH-FIT CAPSA & AR SeriesRound End CapsABSpecifications: Material: Low-Density Polyethylene Color: See TableAFeatures: Designed to protect outside diameters Parts with a W/R have an internal molded ring for extra gripping power Parts with AR prefix have internal ribs for superior retentionBAR PrefixSee pages 64 and 65 for Application 0200150PIPE CAPS & PLUGSSee Pages 92 - 95 www.essentracomponents.com28tel 800 847 0486fax 866 561 6617
CAPS, PLUGS & NETTINGPUSH-FIT CAPSDM & DMS SeriesRound Vinyl End CapsBSpecifications: Material: Vinyl (PVC) Color: DM – Black – 75 DurometerDMS – Red – 63 Durometer Temperature Range: Up to 350 F (177 C) For high temperature up to 425 F (218 C) see page 71ASee pages 64 and 65 for Application WizardsFeatures: Flexible material can stretch onto larger dimensions for a snug fit without tearing,splitting or shredding Typically used to protect threaded or non-threaded tubing, rods, pipe or paper tubes Glossy and attractive finish makes this part ideal for use as a decorative end cap Red colored parts are highly visibleItem No.A To 0.6870.6870.7250.7500.7500.8120.8120.8430.843B 6221.4121.411/2 in (12.70 S0812-1/2ADM0843-1/2A—1 in (25.40 M0812-1ADMS0812-1ADM0843-1ADMS0843-1ABulk Pack Qty1 - 1/2 in (38.10 ckRed1/2 0025005000—1 02500250025002500250025001 - 1/2 —(Continued on next page )email sales@essentracomponents.comweb www.essentracomponents.com29
CAPS, PLUGS & NETTINGPUSH-FIT CAPSDM & DMS SeriesRound Vinyl End Caps (continued
tel 800 847 0486 fax 866 561 6617 caps, plugs & netting 28 push-fit caps
