WIXLIB

Advancing Reservoir PerformanceTECHFACTSEngineeringHandbook 2009 Baker Hughes Incorporated. All Rights Reserved.BOT-09-24532 2.5MTECH FACTSEngineering Handbook

Baker HughesTech Facts Engineering HandbookTechnical Informationfor Completions, Workovers, and FishingComments, requests and corrections should be sent toTechFacts@bakerhughes.comInformation available in this book has been obtained by Baker Hughes from sourcesbelieved to be reliable. However, neither Baker Hughes nor its authors guarantees theaccuracy or completeness of any information published herein and neither Baker Hughesnor its authors shall be responsible for any errors, omissions, or damages arising out of use of thisinformation. This work is published with the understanding that Baker Hughes and its authors aresupplying information but are not attempting to render engineering or other professional services.If such services are required, the assistance of an appropriate professional should be sought. 2009 Baker Hughes Incorporated. Other terms used in this brochure may betrademarks of other manufacturers. All rights reserved.Printed in U.S.A. Reprinted December 2009, BOT-09-24532VAM and ACE are registered trademarks of Vallourec Mannesmann Oil and Gas France.Otis is a registered trademark of Halliburton.HYDRIL is a registered trademark and service mark of HYDRIL Company LP, Houston TX.511 , 513 , 503 , 523 , 533 , 553 , 563 , SuPreme , SLX , and MAC are trademarks of HYDRIL Company LP, Houston TX.

Baker Hughes provides one proven source for all your completion, workover and fishing needs. Drawingfrom a full range of patented products and systems, our people work together in a coordinated effortdirected at the total picture, not just isolated pieces of it. From well planning to the installation of yourcompletion, it means an integrated solution to optimize production and achieve efficiencies throughout thelife of your well.Baker Hughes products have proven their reliability and durability in virtually every type of well conditionencountered worldwide. Our conventional products and systems have provided superior performance fordecades. Our extreme environment products meet most severe performance challenges: Arctic-coldsurface conditions, high temperatures and high pressures downhole, highly corrosive well environmentsand the special demands of operating in deepwater and other environments offshore.Baker Hughes is also an industry leader in advanced technologies such as Multilateral Systems,Intelligent Well Systems and Expandable technologies.For your completion, workover and fishing products or services anywhere in the world, contact yourBaker Hughes Representative or the sales and services location nearest you.

Tool Joints 1Drillpipe 2Drill Collars and Connections 3Stretch Data 4Tubing and Casing Data 5Dimensions and Capacities 6Annular Volume Tubing 7Annular Volume Casing 8Sand Control Products 9Coiled Tubing Products 10General Information 11

Section 1 - Tool JointsTable Of ContentsAPI Regular Thread Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1API Full Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2API Numbered Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3American MT, AMT, AMMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4PAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5American Openhole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6American Openhole Light Weight and Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Cable Tool Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Gulf Tubing Tool Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Hughes Double Streamline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Hughes H - 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Hughes Slim Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Hughes Slimline H - 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Hughes Xtra Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Hughes External Flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Rotary Shouldered Connection Interchange List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Small Diameter Tool Joints Dimension and Strength Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17PRT Connections Dimension and Strength Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Large Diameter Tool Joints Dimension and Strength Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Recommended Maximum and Minimum Tool Joint Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 19Tool Joints - Interchangeability Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20“X” Series Drill Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23“W” Series Drill Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Tool JointsBaker Hughes1-1API Regular Thread H(TPI)55554444SizeNotes1-1/4Non-API4-1/25-3/4" Optional OD6-5/8Threaded portion same as that of 5-1/2" Union Tool Full Hole7-5/8Obsolete API connection8-5/8Obsolete API connectionData provided by API from table 25 columns 3, 4, 7, 8, 9, 11 and 12, fortieth edition, API 7;November, 2001K(TPF)33333233

Tool JointsBaker Hughes1-2lAPI Full )332322SizeNotes2-7/8Not API standard3-1/2ID changed from 2-7/16", May, 1979 (API)4Thread form same as that of API IF connectionData provided by API table J-1 (Appendix J) columns 3, 4, 7, 8, 9, 11 and 12and table 25 columns3, 4, 7, 8, 9, 11 and 12, fortieth edition, API 7; November, 2001

Tool JointsBaker Hughes1-3API Numbered ConnectionsOD’s and ID’s Listed Denote API Standard for Drillpipe ConnectionsABCDEFGHK(TPI) (TPF)in.in.in.in.in.in.in.NC 2333-1/82.4372.0632-5/83-5/81-1/442NC 2633-3/82.7502.3762-15/163-5/81-3/442NC 313-1/24-1/83.2662.8083-29/644-1/82-1/842NC 353-3/44-3/43.6253.1143-13/164-3/82-1/442NC 3844-3/43.8913.3494-5/644.0002-11/1642NC 404-1/25-1/44.1563.5304-11/325-1/82-13/1642NC 444-1/25-3/44.4993.8754-11/165-1/83-1/842NC 464-1/264.7094.0844-29/325-1/83-1/442NC 504-1/26-5/85.1354.5005-5/165-1/83-3/442NC 56575.7034.6266-15/165-5/83-3/443NC 615-1/286.2665.0636-1/26-1/8443NC 7069-1/47.1415.8137-3/86-5/84-1/243NC 776-1/210-3/47.8286.3768-1/167-1/84-3/443Data provided by API from table 25 columns 3, 4, 7, 8, 9, 11 and 12, fortieth edition, API 7; November,2001Size

Tool JointsBaker Hughes1-4American MT, AMT, .in.in.in.11-1/2 1-9/16 1.281 1.093 1.301 1-1/23/461.233 1-1/2 1-1/8 61/6421-1/421-3/4 1.469 1.218 1.48923/461.421 1-1/2 1-5/8 1-3/32 2-1/21-1/2221.668 1.418 1.6882161.621 1-1/2 1-5/8 1-9/32 2-1/2MT is Macaroni Tubing; AMT is American Macaroni Tubing; AMMT is American Mining Macaroni TubingThese connection names are three (3) names given to the same basic threaded connectionSizeOin.1.1831.3711.570

Tool JointsBaker 43K(TPF)1-1/21-1/21-1/2

Tool JointsBaker Hughes1-6American 21-1/21-1/2Yin.3/83/85/85/85/8American Openhole Light Weight and 3.958H(TPI)44444

Tool JointsBaker Hughes1-7AU.63D C B XH - THDS PER INCHK - INCLUDED TAPER7 TPI - .018.143 - 7 TPI30 8 TPI - .016TYP.125 - 8 TPI7 TPI - .01390 8 TPI - .011AXIS OF JOINTCable Tool Joints7/8 x 1-1/4-107/8 x 1-1/2-101 x 1-1/2-8Ain.2-1/42-5/82Bin.1-7/82-1/421-1/8 x 1-3/4-82-1/22-1/21-1/2 x 2-1/4-81-5/8 x 2-1/2-81-5/8 x 2-5/8-71-3/4 x 2-3/4-833-1/23-1/23-1/23-1/83-1/23-5/83-3/42 x 3-744-1/42-1/4 x 3-1/4-744-1/22-1/2 x 3-1/2-72-3/4 x /163-9/323-37/643-13/163 x 4-74-3/4643-1/4 x 4-1/4-73-1/2 x 5-1/167-1/28-1/45-1/26Size4 x 5-74 x 5-1/2-74-1/4 x 87-7/88-5/8

Tool JointsBaker Hughes1-8Gulf Tubing Tool 4141-1/22-3/44.5003.9783.6344.00032.99241-1/2

Tool JointsBaker Hughes1-9Hughes Double -1/25CDEin.in.in.3-21/64 2-11/16 3-23/643-57/64 3-7/32 3-59/644-9/32 3-17/32 PI)444Jin.3-15/643-51/644-3/16K(TPF)222

Tool JointsBaker Hughes1-10Hughes H - 45-7/165-3/16Gin.2-5/8 - 2-3/42-1/2 - 2-3/42 - 2-5/82 - 2-1/42 - 2-1/82-7/8 - 32-1/2 - 2-7/82-1/4 - 2-7/82 - 2-3/42 - 2-1/23 - 3-1/42 -3/4 - 32-1/2 - 32-32 - 2-3/42-7/8 - 3-1/42-1/2 - 32-1/4 - 32-1/4 - 2-3/42-1/23-1/8 - 3-3/83 - 3-1/42-3/4 - 3-1/42-1/4 - 3-1/42-1/4 - 32-1/4 - 2-3/42-1/4 - 24-41/6423-1/24-59/6426-3/83-1/25-3/162

Tool JointsBaker Hughes1-11Hughes H-90 1-1/2Cin.Din.Ein.Fin.65-3/166-1/16 5-11/166-1/25-5/327-1/85-15/1686-9/16Gin.3-3/8 - 3-5/83-1/4 - 3-1/23 - 3-1/22-1/2 - 3-1/22-1/2 - 3-1/42-1/2 - 33-1/2 - 7-17/6433-1/28-9/6432-3/4 - 3-3/47-25/64 5-57/642-3/4 - 3-1/22-3/4 - 3-1/42-3/4 - 33-1/2 - 43-43 - 3-3/43 - 3-1/43-1/2 - 48-17/64 6-41/649-3/87-1/163-43 - 3-1/4

Tool JointsBaker Hughes1-12Hughes Slim 3-1/43-1/43-3/43-3/44-1/4NotesObsolete 44444K(TPF)22222

Tool JointsBaker Hughes1-13Hughes Slimline H - 2.725Din.Ein.Fin.2.439 2-49/64 3-1/16Gin.H(TPI)1-1/232-1/8 - 2-1/43.1962.897 3-15/64 3-3/83.8353.5093-7/83-3/821-3/4 - 21-1/2 - 1-3/42-3/8 - 2-3/42-1/2 - 2-3/42-5/82-3/8 - 2-1/22 - 2-3/81-3/4 - 2-1/833Jin.LMNin.in.in.3-1/162-43/64 1-1/42-1/42-5/83-3/163-5/83-23/323-5/32 1-1/4 3-13/16 2-45/64 3-3/323-29/3244-7/164-17/32K(TPF)3-25/32 1-1/44-5/8 3-11/32 3-47/644-23/324-13/16

Tool JointsBaker Hughes1-14Hughes Xtra 63-1/43-3/4H(TPI)4444Jin.3-15/64-K(TPF)2222

Tool JointsBaker Hughes1-15Hughes External 64-2

2-7/8 Not API standard . 2-7/8 2-1/2 3-3/4 3-9/64 2-53/64 3-7/32 3 2.441 4 3-7/64 1-1/2 3/8 3-1/2 3-1/4 4-1/2 3-57/64 3-31/64 3-61/64 3-3/8 2.992 4 3-27/32 1-1/2 5/8 4 3-1/2 5-1/4 4-37/64 4-9/64 4-41/64 4-1/8 3.476 4 4-17/32 1-1/2 5/8 . Baker Hughes ! " " ! " Baker Hughes. Baker Hughes. Baker Hughes 2. Baker Hughes S 2 .