Transcription
2020 Industrial Power SolutionsProduct Portfoliowww.tracopower.com
Company ProfileTRACO Electronic AG is a Swiss company with headquarters based in Baar, Switzerland. As a leading powersupply specialist with more than 40 years experience we are dedicated to the design and manufacturing ofhigh quality DC/DC and AC/DC power conversion products.TRACO markets its products worldwide under the registered trademark TRACO POWER. Our mission is toprovide our customers with optimal power supply solutions in terms of performance, quality and cost for theirindividual application.The varying levels of industrial power suppliesAll power supplies designed for use in non-medical application are required to meet the international safetystandards of IEC/EN/UL 62368-1. Industrial grade power supplies are subjected to increased requirementswhich vary depending upon their operating environment, typically divided into 2 categories, one for office /manufacturing environments and another for harsh/hazardous environments.For power supplies in household applications, there are virtually no differences when it comes to insulationand operational safety. However, stronger electromagnetic and conducted disturbances are expected to arisein industrial environments, and electrical power supplies must be resistant to these. EMC immunity tests according to the generic standard IEC 61000-6-2 „immunity for industrial environments“ is the common denominator for a power supply being classified as industrial-grade.The right product for the application and environment / standard productsTraco Power offers a wide selection of standard industrial power supplies that are manufactured and testedaccording to the varying environments and applicable safety standards, allowing our customers to choosethe power solution that is most cost-effective for their application and environmental requirements.All our industrial rated power supplies provide following features as standard:¡ Safety approval according IEC/EN/UL 62368-1 (for 3000 VAC I/O isolation)¡ EMC immunity according IEC 61000-6-2¡ EMC emission according EN 55032 class B¡ Protection against short circuit, overload and output over-voltageCustomer specific applications / customized solutionsIt is often not possible to find a standard power supply that fully complies with the respective requirementsor without unnecessary features making the application more expensive. With our design company TRACOPOWER SOLUTIONS we have a center of competence to develop and optimize power supplies for customer-specific requirements. The motto from our design team is “Reduced to the Max” and develop or modify asolution specific to your needs at the lowest cost of ownership.Note: All dimension drawings in mm (inch)
Index PageNon-Isolated Step Down DC/DC Converters (POL) in SIP Package 0.5–30 AmpTSR 0.5SIP-3 package, 4.75-32 VDC input, pos.-pos. circuit, LM78 compatibleTSR 0.6WISIP-3 package, 9-72 VDC input, pos.-pos. circuit, LM78 compatibleTSR 1SIP-3 package, 4.6-36 VDC input, pos.-pos. circuit, LM78 compatibleTSR 1ESIP-3 package, 6-36 VDC input, pos.-pos. circuit, cost efficient, LM78 compatibleNEW under development1 A 12TSR 1WISIP-3 package, 9-72 VDC input, pos.-pos. circuit, LM78 compatibleNEW1 A 13TSN 1SIP-3 package, -7.0 to -32 VDC input, neg.-neg. circuit, LM78 compatible1 A 13TSRN 1SIP-3 package, 4.6-42 VDC input, pos.-neg. circuit, LM78 compatible1 A 14TSR 2SIP-3 package, 3.0-36 VDC input, pos.-pos. circuit, LM78 compatible2 A 14TSR 3SIP-3 package, 2.5-30 VDC input, pos.-pos. circuit, open frame, LM78 compatible3 A 15TOSSIP package, 2.4-14 VDC input, pos.-pos. circuit, open frame6-30 A 15NEWNon-Isolated Step Down DC/DC Converters (POL) SMD Package 0.5 A 110.6 A 111 A 120.5–30 AmpTSR 0.5SMSMD (DIP-10) package, 4.75-32 VDC input, pos.-pos. circuit0.5 A 16TSR 1SMSMD (DIP-10) package, 3.0-36 VDC input, pos.-pos. circuit1 A 16TSRN 1SMSMD (DIP-10) package, 3.0-42 VDC input, pos.-neg. circuit1 A 17TOSSMD package, 2.4-14 VDC input, pos.-pos. circuit, open frame6-30 A 17SMD DC/DC Converters 1 - 15 WattTES 1SMD (DIP-10) package, 10% input, unregulated1 W 18TES 1VSMD (DIP-12) package, 10% input, unregulated, 3000 VDC I/O-isolation, plastic case1 W 18TRN 1SMSMD package, 2:1 input, regulated, cost efficient, encapsulated1 W 19TDN 1WISMSMD package, 4:1 input, regulated, high power density, encapsulated1 W 19TMR 1SMSMD (DIP-14) package, 2:1 input, regulated1 W 20TES 2HSMD (DIP-10) package, 10% input, unregulated2 W 20TMR 2WISMSMD (DIP-14) package, 4:1 input, regulated2 W 21TDR 2SMSMD (DIP-14) package, 2:1 input, regulated, overmold (washable)2 W 21TDR 2WISMSMD (DIP-14) package, 4:1 input, regulated, overmold (washable)2 W 22TRS 2SMD package, 2:1 input, regulated, cost efficient, encapsulated2 W 22TES 2MSMD (DIP-16) package, 10% input, unregulated, 4000 VAC I/O-isolation (reinforced)2 W 23TIM 2SMSMD (DIP-16), 2:1 input, 5000 VAC I/O-isolation, 2 x MOPP, medical, encapsulated2 W 23TRN 3SMSMD package, 2:1 input, regulated, cost efficient, encapsulated3 W 24TDN 3WISMSMD package, 4:1 input, regulated, high power density, encapsulated3 W 24TMR 3WISMSMD (DIP-14) package, 4:1 input, regulated3 W 25TDR 3SMSMD (DIP-14) package, 2:1 input, regulated, overmold (washable)3 W 25TDR 3WISMSMD (DIP-14) package, 4:1 input, regulated, overmold (washable)3 W 26THL 3WISMSMD (DIP-16) package, 4:1 input, regulated3 W 26TIM 3.5SMSMD (DIP-16), 2:1 input, 5000 VAC I/O-isolation, 2 x MOPP, medical, encapsulated3.5 W 27TDN 5WISMSMD package, 4:1 input, regulated, high power density, encapsulated5 W 27THL 6WISMSMD package, 4:1 input, regulated6 W 28TON 15SMSMD package, 2:1 input, regulated, open frame15 W 28TON 15WISMSMD package, 4:1 input, regulated, open frame15 W 29NEWSIP DC/DC CONVERTERS TBA 1ESIP-7 package, 10% input, unregulated, short circuit protection, encapsulated1–9 WattNEW1 W 30
Index PageNEW under developmentTEA 1ESIP-7 package, 10% input, unregulated, cost optimized design, encapsulatedTMASIP-7 package, 10% input, unregulated, encapsulated1 W 301 W 31TBA 1SIP-4 package, 10% input, unregulated, short circuit protection, encapsulatedNEW1 W 31TEA 1SIP-4 package, 10% input, unregulated, cost optimized design, encapsulatedTMESIP-4 package, 10% input, unregulated, encapsulatedNEW under development1 W 321 W 32TRA 1TMAPSIP-7 package, 10% input, semi-regulated, encapsulated1 W 33SIP-7 package, 10% input, unregulated, short circuit protection, 3000 VDC I/O iso.1 W 33TMVSIP-7 package, 10% input, unregulated, 3000 VDC I/O isolation, encapsulated1 W 34TBA 1HISIP-7 package, 10% input, unregulated, short circuit protection, 3000 VDC I/O iso.NEW1 W 34TEA 1HISIP-7 package, 10% input, unregulated, 4000 VDC I/O isolation, encapsulatedNEW under development1 W 35TMV-HISIP-7 package, 10% input, unregulated, 5200 VDC I/O isolation, encapsulated1 W 35TMV-ENSIP-7 package, 10% input, unregulated, 3000 VAC I/O isolation (reinforced), encapsulated1 W 36TRV 1SIP-7 package, 10% input, semi-regulated, 3000 VDC I/O isolation, encapsulated1 W 36TRV 1MSIP-7 package, 10% input, semi-regulated, 5000 VAC isolation, 2 x MOPP1 W 37TRN 1SIP-5 package, 2:1 input, regulated, cost efficient, compact, encapsulated1 W 37TMR 1SIP-6 package, 2:1 input, regulated, encapsulated1 W 38TMV 2HISIP-7 package, 10% input, unregulated, 5200 VDC I/O-isolation, encapsulated2 W 38TBA 2SIP-7 package, 10% input, unregulated, short circuit protection, encapsulated2 W 39TMHSIP-7 package, 10% input, unregulated, encapsulated2 W 39TEC 2SIP-8 package, 2:1 input, regulated, cost efficient, encapsulated2 W 40TEC 2WISIP-8 package, 4:1 input, regulated, cost efficient, encapsulated2 W 40TMR 2SIP-8 package, 2:1 input, regulated, encapsulated2 W 41TMR 2WINSIP-8 package, 4:1 input, regulated, encapsulated2 W 41TRA 3SIP-7 package, 10% input, semi-regulated, encapsulated3 W 42TRN 3SIP-5 package, 2:1 input, regulated, cost efficient, compact, encapsulated3 W 42TEC 3SIP-8 package, 2:1 input, regulated, cost efficient, encapsulated3 W 43TEC 3WISIP-8 package, 4:1 input, regulated, cost efficient, encapsulated3 W 43TMR 3SIP-8 package, 2:1 input, regulated, encapsulated3 W 44TMR 3WISIP-8 package, 4:1 input, regulated, encapsulated3 W 44TMR 3HISIP-8 package, 2:1 input, regulated, 3000 VDC I/O-isolation (functional), encapsulated3 W 45TVN 3SIP-8 package, 2:1 input, regulated, ultra low ripple & noise, metal case3 W 45TMR 3WIRSIP-8 package, 2:1 input, regulated, 3000 VDC I/O-isolation, railway, metal case3 W 46TMR 4SIP-8 package, 2:1 input, regulated, encapsulatedNEW under development4 W 46TMR 4WISIP-8 package, 4:1 input, regulated, encapsulatedNEW under development4 W 47TMR 6SIP-8 package, 2:1 input, regulated, encapsulated6 W 47TMR 6WISIP-8 package, 4:1 input, regulated, encapsulated6 W 48TMR 6WIRSIP-8 package, 2:1 input, regulated, 3000 VDC I/O-isolation, railway, metal case6 W 48TMR 9SIP-8 package, 2:1 input, regulated, ultra compact, encapsulated9 W 49TMR 9WISIP-8 package, 4:1 input, regulated, ultra compact, encapsulated9 W 49NEW under developmentNEWHigh Performance DC/DC Converters 1–60 WattTDN 1WIDIP package, 4:1 input, regulated, encapsulated1 W 50TDL 2DIP package, 2:1 input, regulated, compact design, encapsulated2 W 50TDR 2DIP-14 package, 2:1 input, regulated, overmold (washable), plastic case2 W 51TDR 2WIDIP-14 package, 4:1 input, regulated, overmold (washable), plastic case2 W 51TEL 2DIP-16 package, 2:1 input, regulated, encapsulated2 W 52THI 2MDIP-16 package, 10% input, unregulated, 2 x MOOP, encapsulated2 W 52
Index PageTIM 2DIP-16 package, 2 :1 input, regulated, 5000 VAC I/O-isolation, 2 x MOPP medical, encapsulated NEW2 W TDL 3DIP package, 2:1 input, regulated, compact design, encapsulated3 W 53TDN 3WIDIP package, 4:1 input, regulated, high power density, encapsulated3 W 54TDR 3DIP-14 package, 2:1 input, regulated, overmold (washable), plastic case3 W 54TDR 3WIDIP-14 package, 4:1 input, regulated, overmold (washable), plastic case3 W 55THL 3WIDIP-16 package, 4:1 input, regulated, encapsulated3 W 55TEM 3NDIP-24 package, 10% input, regulated, cost efficient, encapsulated3 W 56TEL 3DIP-24 package, 2:1 input, regulated, encapsulated3 W 56TEN 3NDIP-24 package, 2:1 input, regulated, cost efficient, encapsulated3 W 57TEN 3WINDIP-24 package, 4:1 input, regulated, cost efficient, encapsulatedTRI 3DIP-24 package, 2:1 input, regulated, 1000 VAC working voltage, encapsulatedNEWTHR 3WIDIP-24 package, 4:1 input, regulated, 3000 VAC isolation (reinforced), encapsulatedNEW under developmentTHI 3THP 3533 W 573.5 W 583 W 58DIP-24 package, 10% input, regulated, 4000 VAC isolation, 2 x MOOP, encapsulated3 W 59DIP-24 package, 4:1 input, regulated, 3000 VAC isolation, 2 x MOOP, encapsulated3 W 59THM 3DIP-24 package, 2:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated3 W 60THM 3WIDIP-24 package, 4:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated3 W 60TIM 3.5DIP-16 package, 2 :1 input, regulated, 5000 VAC I/O-isolation, 2 x MOPP medical, encapsulated NEW3.5 W 61TDN 5WIDIP package, 4:1 input, regulated, highest power density, encapsulated5 W 61TVN 5WIDIP-24 package, 4:1 input, regulated, ultra low ripple & noise, encapsulated, metal case5 W 62TEL 5DIP-24 package, 2:1 input, regulated, cost optimized, encapsulated5 W 62TMDC 062.09” x 1.34”, 4:1 input, harsh EMC capabilities, chassis mountNEW6 W 63TMDC 06H2.09” x 1.34”, 2:1 input, harsh EMC capabilities, 3000 VAC isolation, chassis mountNEW6 W 63TEN 6NDIP-24 package, 2:1 input, regulated, cost efficient, encapsulated6 W 64TEN 6WINDIP-24 package, 4:1 input, regulated, cost efficient, encapsulated6 W 64TEN 6WIN-HIDIP-24 package, 4:1 input, regulated, cost efficient, 3000 VDC isolation, encapsulated6 W 65TRI 6DIP-24 package, 2:1 input, regulated, 1000 VAC working voltage, encapsulated6 W 65THM 6DIP-24 package, 2:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated6 W 66THM 6WIDIP-24 package, 4:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated6 W 66TEL 8DIP-16 package, 2:1 input, regulated, high power density, encapsulated, metal case8 W 67TEL 8WIDIP-16 package, 4:1 input, regulated, high power density, encapsulated, metal case8 W 67TEN 8DIP-24 package, 2:1 input, regulated, encapsulated, metal case8 W 68TEN 8WIDIP-24 package, 4:1 input, regulated, encapsulated, railway, metal case8 W 68TEL 10DIP-16 package, 2:1 input, regulated, high power density, encapsulated, metal case10 W 69TEL 10WIDIP-16 package, 4:1 input, regulated, high power density, encapsulated, metal case10 W 69THD 10NDIP-24 package, 2:1 input, regulated, encapsulated, metal case10 W 70THD 10WINDIP-24 package, 4:1 input, regulated, encapsulated, metal case10 W 70THL 101” x 1” package, 2:1 input, regulated, cost efficient, encapsulated, metal case10 W 71THL 10WI1” x 1” package, 4:1 input, regulated, cost efficient, encapsulated, metal case10 W 71THN 10WIR1” x 1” package, 4:1 input, regulated, 3000 VDC isolation, encapsulated, metal caseNEW10 W 72TRI 10DIP-24 package, 2:1 input, regulated, 1000 VAC working voltage, encapsulatedNEW10 W 72THR 10WI2 x 1” package, 4:1 input, regulated, 3000 VAC isolation (reinforced), encapsulatedNEW under development10 W 73THM 10DIP-24 package, 2:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated10 W 73THM 10WIDIP-24 package, 4:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated10 W 74TMDC 103.11” x 1.34”, 4:1 input, harsh EMC capabilities, chassis mountNEW10 W 74TMDC 10H3.11” x 1.34”, 2:1 input, harsh EMC capabilities, 3000 VAC isolation, chassis mountNEW10 W 75TEL 12WIDIP-16 package, 4:1 input, regulated, high power density, encapsulated, metal caseNEW under development12 W 75THD 12DIP-24 package, 2:1 input, regulated, encapsulated, metal case12 W 76THD 12WIDIP-24 package, 4:1 input, regulated, encapsulated, metal case12 W 76NEWNEW
Index THD 15NPageDIP-24 package, 2:1 input, regulated, encpasulated, metal case15 W 77THD 15WINDIP-24 package, 4:1 input, regulated, encpasulated, metal case15 W 77TON 151.1” x 1” package, 2:1 input, regulated, open frame15 W 78TON 15WI1.1” x 1” package, 4:1 input, regulated, open frame15 W 78THN 15N1” x 1” package, 2:1 input, regulated, encpasulated, metal case15 W 79THL 15WI1” x 1” package, 4:1 input, regulated, cost optimized, encpasulated, metal caseNEW15 W 79THN 15WI1” x 1” package, 4:1 input, regulated, encpasulated, metal caseNEW models15 W 80TRI 152” x 1” package, 2:1 input, regulated, 1000 VAC working voltage, encpasulatedNEW15 W 80THN 15WIR1” x 1” package, 4:1 input, regulated, 3000 VDC isolation, railway, encpasulated, metal case15 W 81THM 151.6” x 1” package, 2:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated15 W 81THM 15WI1.6” x 1” package, 4:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated15 W 82THN 201” x 1” package, 2:1 input, regulated, encpasulated, metal caseNEW models20 W 82THN 20WI1” x 1” package, 4:1 input, regulated, encpasulated, metal caseNEW models20 W 83THL 20WI1” x 1” package, 4:1 input, regulated, cost optimized, encpasulated, metal case20 W 83TEN 202” x 1” package, 2:1 input, regulated, encpasulated, metal case20 W 84TEN 20WIN2” x 1” package, 4:1 input, regulated, encpasulated, metal case20 W 84TRI 202” x 1” package, 2:1 input, regulated, 1000 VAC working voltage, encpasulatedNEW20 W 85THR 20WI2” x 1” package, 4:1 input, regulated, 3000 VAC isolation (reinforced), encapsulatedNEW under development20 W 85THN 20WIR1” x 1” package, 4:1 input, regulated, 3000 VDC isolation, railway, encpasulatedNEW under development20 W 86TEN 20WIR2” x 1” package, 4:1 input, regulated, 2250 VDC isolation, railway, encpasulated20 W 86THM 201.6” x 1” package, 2:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated20 W 87THM 20WI1.6” x 1” package, 4:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated20 W 87TMDC 203.78” x 1.81”, 4:1 input, harsh EMC capabilities, chassis mount20 W 88TMDC 20H3.78” x 1.81”, 2:1 input, harsh EMC capabilities, 3000 VAC isolation, chassis mountNEW20 W 88TEQ 20WIR4” x 2.3” package, 4:1 input, regulated, 2250 VDC isolation, railway, encased, chassis mount20 W 89THL 251” x 1” package, 2:1 input, regulated, cost optimized, encpasulated, metal case25 W 89THL 25WI1” x 1” package, 4:1 input, regulated, cost optimized, encpasulated, metal case25 W 90TEN 302” x 1” package, 2:1 input, regulated, encpasulated, metal case30 W 90TEN 30WIN2” x 1” package, 4:1 input, regulated, encpasulated, metal case30 W 91THN 301” x 1” package, 2:1 input, regulated, encpasulated, metal case30 W 91NEW modelsTHN 30WI1” x 1” package, 4:1 input, regulated, encpasulated, metal caseNEW models30 W 92THN 30WIR1” x 1” package, 4:1 input, regulated, 3000 VDC isolation, railway, encpasulatedNEW under development30 W 92THM 302” x 1” package, 2:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated30 W 93THM 30WI2” x 1” package, 4:1 input, regulated, 5000 VAC isolation, 2 x MOPP medical, encapsulated30 W 93TEN 402” x 2” package, 2:1 input, regulated, encpasulated, metal case40 W 94TEN 40WI2” x 2” package, 4:1 input, regulated, encpasulated, metal case40 W 94TEN 40N2” x 1” package, 2:1 input, regulated, encpasulated, metal case40 W 95TEN 40WIN2” x 1” package, 4:1 input, regulated, encpasulated, metal case40 W 95TEN 40E2” x 1” package, 2:1 input, regulated, cost efficient, encpasulated, metal caseNEW40 W 96TEN 40WIE2” x 1” package, 4:1 input, regulated, cost efficient, encpasulated, metal caseNEW40 W 96THR 40WI2” x 1” package, 4:1 input, regulated, 3000 VAC isolation (reinforced), encapsulatedNEW under development40 W 97TEN 40WIR2” x 1” package, 4:1 input, regulated, 2250 VDC isolation, railway, encpasulated40 W 97TEQ 40WIR4” x 2.3” package, 4:1 input, regulated, 2250 VDC isolation, railway, encased, chassis mount40 W 98TMDC 404.41” x 2.51”, 4:1 input, harsh EMC capabilities, chassis mount40 W 98TMDC 40H4.41” x 2.51”, 2:1 input, harsh EMC capabilities, 3000 VAC isolation, chassis mount40 W 99TEN 502” x 1” package, 2:1 input, regulated, encpasulated, metal case50 W 99TEN 50WI2” x 1” package, 4:1 input, regulated, encpasulated, metal case50 W 100TEN 60N2” x 1” package, 2:1 input, regulated, encpasulated, metal case60 W 100NEW
Index PageTEN 60WIN2” x 1” package, 4:1 input, regulated, encpasulated, metal case60 W 101TEN 60WIR2” x 1” package, 4:1 input, regulated, 3000 VDC isolation, railway, encpasulatedNEW under development60 W 101THM 60WI2.28” x 1.45” package, 4:1 input, regulated, 5000 VAC isolation, 2 x MOPP medicalTMDC 604.41” x 2.67”, 4:1 input, harsh EMC capabilities, chassis mountNEW under development60 W 10260 W 102TMDC 60H4.41” x 2.67”, 2:1 input, harsh EMC capabilities, 3000 VAC isolation, chassis mount60 W 103NEWHigh Power DC/DC Converters / RIA12 Surge Filters 40–300 WattTFIDIP-24/1.6” x 1” package, RIA 12, NF F01-510 surge filterNEW0–300 W 104TEP 40UIR1/4-Brick package, 12:1 input, 3000 VAC isolation, railway, PCB mountNEW under development40 W 104TEP 60UIR1/4-Brick package, 12:1 input, 3000 VAC isolation, railway, PCB mountNEW under development60 W 105TEP 75WI1/2-Brick package, 4:1 input, 2250 VDC isolation, railway, PCB- chassis mount75 W 105TEP 1001/2-Brick package, 2:1 input, 2250 VDC isolation, PCB- chassis mount100 W 106TEP 100UIR1/4-Brick package, 12:1 input, 3000 VAC isolation, railway, PCB mount100 W 106TEP 100WIR1/2-Brick package, 4:1 input, 2250 VDC isolation, railway, PCB- chassis mount100 W 107TEQ 100WIR3” x 4” x 3.5” package, 4:1 input, 2250 VDC isolation, rugged design, railway, chassis mount100 W 107TEP 150WI3.9” x 2.1” package, 4:1 input, 2250 VDC isolation, rugged design, railway, chassis mount150 W 108TEP 1601/2-Brick package, 2:1 input, 2250 VDC isolation, PCB- chassis mount160 W 108NEW under developmentTEP 160WIR1/2-Brick package, 4:1 input, 2250 VDC isolation, railway, PCB- chassis mount160 W 109TEQ 160WIR3” x 4” x 3.5” package, 4:1 input, 2250 VDC isolation, rugged design, railway, chassis mount160 W 109TEP 200WIR1/2-Brick package, 4:1 input, 2250 VDC isolation, railway, PCB- chassis mount200 W 110TEQ 200WIR3” x 4” x 3.5” package, 4:1 input, 2250 VDC isolation, rugged design, railway, chassis mount200 W 110TEQ 300WIR6” x 4” x 1.5” package, 4:1 input, 2250 VDC isolation, rugged design, railway, chassis mount300 W 111Industrial DIN-Rail Mount DC/DC Converters TCL-DC24–60 WattSlim plastic case, 4:1 input, 1500 VDC isolation, DIN-rail mountEncapsulated AC/DC Power Modules 24–60 W 1122–100 WattTMSB 21.35” x 1.12” package, constant power function, 4242 VAC isolation, PCB mount2 W 113TMPS 031” x 1” package, 3000 VAC isolation, household, PCB mount3 W 113TMPS 051” x 1” package, 3000 VAC isolation, household, PCB mount5 W 114TMPW 51.46” x 1.08”, 90-305 VAC input, 4000 VAC isolation, household, PCB mountNEW under development5 W 114TMPW 5-J2.17” x 1.08”, 90-305 VAC input, 4000 VAC isolation, houshold, chassis mountNEW under developmentTMPS 101.5” x 1” package, 3000 VAC isolation, household, PCB mountTMPW 101.46” x 1.08”, 90-305 VAC input, 4000 VAC isolation, household, PCB mountTMPW 10-JTMPS 155 W 11510 W 115NEW under development10 W 1162.17” x 1.08”, 90-305 VAC input, 4000 VAC isolation, household, chassis mountNEW under development10 W 1162” x 1” package, 3000 VAC isolation, household, PCB mountNEW under development15 W 117TPP 15-J2.82” x 1.14” package, 4000 VAC isolation, medical/household, 2xMOPP, chassis mount15 W 117TPP 15-D1.65” x 1.14” package, 4000 VAC isolation, medical/household, 2xMOPP, PCB mount15 W 118TIW2.2” x 2.2” package, 4000 VAC isolation, household, flush box mounting (IP67)4–24 W 118TMPW 252.07” x 1.08”, 90-305 VAC input, 4000 VAC isolation, household, PCB mountNEW under development25 W 119TMPW 25-J3.48” x 1.08”, 90-305 VAC input, 4000 VAC isolation, household, chassis mountNEW under development25 W 119TMF4000 VAC isolation, medical 2xMOPP, PCB mount5–30 W 120TPP 30-J3.95” x 1.50” package, 4000 VAC isolation, medical/household, 2xMOPP chassis mount30 W 120TPP 30-D2.89” x 1.50” package, 4000 VAC isolation, medical/household, 2xMOPP, PCB mount30 W 121TMW2.09” x 2.0”, 4000 VAC isolation, household/medical, 2xMOPP, flush box mount (IP68) NEW under developmentTMGCompact design, 3000 VAC isolation, PCB mount24–36 W 1217–50 W 122
Index PageTMPW 502.92” x 1.85”, 90-305 VAC input, 4000 VAC isolation, household, PCB mountNEW under development50 W 122TMPW 50-J3.81” x 1.85”, 90-305 VAC input, 4000 VAC isolation, household, PCB mountNEW under development50 W 123TMP / TMP-CPCB or Chassis mount packages, 3000 VAC isolation7–60 W 123TML / TML-CPCB or Chassis mount packages, 3000 VAC isolation,20–40 W 124TMM / TMM-CLow profile case, 3000 VAC isolation, PCB or chassis mount versions24–60 W 124TML 100C5.5” x 2.36” package, 3000 VAC isolation, active PFC, chassis mount100 W 125Metal Enclosure and Open Frame Power Supplies 15–1000 WattTPP 15A-J2.6” x 1.0” package, 4000 VAC isolation, medical/household, 2xMOPP, chassis mount15 W 126TPP 15A-DTXM1.5” x 1.0” package, 4000 VAC isolation, medical/household, 2xMOPP, PCB mount15 W 126Metal case, 3000 VAC isolation, cost efficient, without fan, encased, chassis mount15–200 W 12715–1000 W 12730 W 12830 W 128TXLMetal case, 3000 VAC isolation, high power, encased, chassis mountTPI 30A-J3.34” x 1.36” package, 3000 VAC isolation, cost efficient, chassis mountTPP 30A-J3.34” x 1.36” package, 4000 VAC isolation, medical/household, 2xMOPP, chassis mountNEW under developmentTPP 30A-D2.74” x 1.1” package, 4000 VAC isolation, medical/household, 2xMOPP, PCB mount30 W 129TPP 40A3” x 2” package, 4000 VAC isolation, medical, 2xMOPP, open frame, chassis mount40 W 129TPP 403.53” x 2.38” package, 4000 VAC isolation, medical, 2xMOPP, enclosed, chassis mount40 W 130TXH 0603.1” x 2” package, 3000 VAC isolation, cost efficient, enclosed, chassis mount60 W 130TPI 65A-J3” x 2” package, 3000 VAC isolation, cost efficient, open frame, chassis mount65 W 131TPP 65A3” x 2” package, 4000 VAC isolation, medical 2xMOPP, open frame, chassis mount65 W 131TPP 653.53” x 2.38” package, 4000 VAC isolation, medical 2xMOPP, encased, chassis mount65 W 132TOP 1004” x 2” package, 3000 VAC isolation, open frame, chassis mount100 W 132TOP 100C4.1” x 2.4” package, 3000 VAC isolation, encased, chassis mount100 W 133TPI 100A3” x 2” package, 3000 VAC isolation, open frame, chassis mount100 W 133TPP 100A-J3” x 2” package, 4000 VAC isolation, medical 2xMOPP, open frame, chassis mount100 W 134TPP 1003.6” x 2.44” package, 4000 VAC isolation, medical 2xMOPP, encased, chassis mount100 W 134TPI 150A4” x 2” package, 3000 VAC isolation, open frame, chassis mount150 W 135TPP 150A-J4” x 2” package, 4000 VAC isolation, medical 2xMOPP, open frame, chassis mount150 W 135TPP 1504.6” x 2.44” package, 4000 VAC isolation, medical 2xMOPP, encased, chassis mount150 W 136TPP 180A3” x 2” package, 4000 VAC isolation, medical 2xMOPP, open frame, chassis mount180 W 136TXHMetal case, 3000 VAC isolation, compact design, encased, chassis mount120–480 W 137TOP 2005” x 3” package, 3000 VAC isolation, open frame, chassis mount200 W 137TOP 200C5” x 3” package, 3000 VAC isolation, encased, chassis mount200 W 138TPP 300A4” x 2” package, 4000 VAC isolation, medical 2xMOPP, open frame, chassis mount300 W 138TPP 450A5” x 3” package, 4000 VAC isolation, medical 2xMOPP, open frame, chassis mount450 W 139TPP 4505.8” x 3” package, 4000 VAC isolation, medical 2xMOPP, standby power, encased, chassis mount450 W 139TXH 6008.7” x 4.1” package, 3000 VAC isolation, active PFC, stanby power output, chassis mount600 W 140NEW under developmentNEW under developmentNEW under developmentOutdoor Power Supply TEX 1206.9” x 3.7” package, 3000 VAC isolation, IP67 enclosure, dust- water- and oil proofDIN-Rail Power Supplies TBLLow profile case (55mm depth), 85-264 VAC input, UL 1310, UL 508TBLCLow profile case (55mm depth), 85-264 VAC input, high efficiency, EN 60355-1, UL 1310, UL 508TCLTPC120 Watt120 W 14115–600 Watt15–150 W 1426–90 W 142Slim profile case, 85-264 VAC input, UL 50824–240 W 143Slim profile case, 85-264 VAC input, robust design, ErP ready, UL 50830–120 W 143
Index PageTIBRugged metal case, 85-264 VAC input, cost efficient, UL 508NEW models80–480 W 144TIB-EXRugged metal case, 85-264 VAC input, ATEX & UL HazLoc approvals, UL 508NEW80–480 W 144TSPCSlim metal case, 85-264 VAC input, UL 50850–480 W 145TSPRugged meal case, 85-264 VAC input, for harsh environments, UPS module options72–600 W 145TSP-WRRugged metal case, wide range 100/230-500 VAC input, UL 508180–600 W 146TISLow profile metal case, 85-264 VAC input, optional built in function modules50–600 W 146240 W 147UPS Systems and Function Modules (DIN-Rail and Industrial Cabinets)UPS SystemTSPC 240UPSCompact universal power supply for uniterruptable 24 VDC output voltageBattery Controller ModulesTSP-BCMU360Universal battery controller module for uninterruptable 24 VDC and 48 VDC bus voltage360 W 147TSP-BCMBattery controller modules compatible with the TSP series72–600 W 148600 W 148Buffer ModulTSP-BFMBuffery moduel to increase hold-up time compatible with the TSP seriesDecoupling, Redundancy and Current Share ModulesTSPC-DCMDecouling module for redundant operation compatible with the TSPC series600 W 149TCL-REMRedundancy module compatible with the TCL series480 W 149TPC-REMRedundancy module compatible with the TPC series240 W 150TSP-REMRedundancy module compatible with the TSP series360–600 W 150
NON-ISOLATED STEP DOWN DC/DC CONVERTERS (POL) IN SIP PACKAGE 0.5–30 AMPTSR 0.5 0.5 Amp11.5 (0.45)1234.1(0.16)0.5(0.02)3.2(0.13)Input VoltageRange4.75 - 32 VDC6.5 - 32 VDC8 - 32 VDC11 - 32 VDC15 - 32 VDC18 - 32 VDCOutputVnomImax1.5 VDC1.8 VDC2.5 VDC3.3 VDC5 VDC6.5 VDC9 VDC12 VDC15 VDC73 %82 %87 %91 %94 %95 %96 %97 %97 %7.55 (0.30)2.0 (0.08)0.25 (0.01)Bottom View10.5 (0.41)PinoutPin1Function Vin2GND3 VoutNEW!0.6 Amp0.5 (0.02)4.1120.5 (0.02)5.6(0.22)8.6 (0.34)2 x 2.54 (2 x 0.100)0.50 x 0.253.5 (0.14)Bottom View(0.020 x 0.010)PinoutPin1TSR 0.6-4833WITSR 0.6-4850WITSR 0.6-4865WITSR 0.6-4890WITSR 0.6-48120WITSR 0.6-48150WITSR 0.6-48240WI3(0.16)13.4 (0.53)Model¡ Ultra wide 8:1 input voltagerange: 9–72 VDC¡ Covers a majority of standardbus- and battery voltages¡ Up to 94% efficiency –No heatsink required¡ Pin compatible with LMxx linearregulators (SIP-3)¡ Operating temperature range–40 to 85 C¡ Low standby current¡ Excellent line/load regulation¡ Protection against short circuit,overvoltage and overtemperature¡ 3-year product warranty500 mAEfficiency2x2.54(2x0.10)0.70(0.03)¡ Compact SIP package¡ Very high efficiency up to 97%¡ Excellent line/load regulation¡ Low standby current¡ Operating temperature range–40 to 90 C¡ Over-temperature protection¡ Short circuit protection¡ 3-year product warrantyTSR 0.5-2415TSR 0.5-2418TSR 0.5-2425TSR 0.5-2433TSR 0.5-2450TSR 0.5-2465TSR 0.5-2490TSR 0.5-24120TSR 0.5-2415010.2 (0.40)0.5 (0.02)ModelTSR 0.6WI PAGE 11Function Vin2GND3 VoutInput VoltageRange9 - 72 VDC14 - 72 VDC17 - 72 VDC20 - 72 VDC33 - 72 VDCOutputVnomImax3.3 VDC5 VDC6.5 VDC9 VDC12 VDC15 VDC24 VDC600 mA400 mAEfficiency85 %89 %91 %92 %93 %94 %94 %
PAGE 12NON-ISOLATED STEP DOWN DC/DC CONVERTERS (POL) IN SIP PACKAGE 0.5–30 AMPTSR 1 1 AmpModel7.5 (0.30)Bottom view5.5 (0.22)0.25 (0.01)0.5(0.02)TSR 1-2412TSR 1-2415TSR 1-2418TSR 1-2425TSR 1-2433TSR 1-2450TSR 1-2465TSR 1-2490TSR 1-24120TSR 1-24150TSR 1E 34.1¡ Up to 96% efficiency –No heat-sink required¡ Pin compatible with LMxx linearregulators¡ SIP-package fits existingTO-220 footprint¡ Built in filter capacitors¡ Operation temp. range–40 C to 85 C¡ Short circuit protection¡ Wide input operating range¡ Excellent line / load regulation¡ Low standby current¡ 3-year product warranty24.6 - 36 VDC4.75 - 36 VDC6.5 - 36 VDC9 - 36 VDC12 - 36 VDC15 - 36 VDC18 - 36 VDCOutputVnomImax1.2 VDC1.5 VDC1.8 VDC2.5 VDC3.3 VDC5 VDC6.5 VDC9 VDC12 VDC15 VDC1000 mAEfficiency74 %78 %82 %87 %91 %94 %93 %95 %95 %96 %(0.16)10.5 (0.02)10.1 (0.40)11.7 (0.46)Input VoltageRange3.3 2.54
2020 Industrial Power Solutions Product Portfolio www.tracopower.com. . The varying levels of industrial power supplies . TEA 1 SIP-4 package, 10% input, unregulated, cost optimized design, encapsulated NEW under development 1 W 32 TME SIP-4 package, 10% input, unregulated, encapsulated 1 W 32 .
