WIXLIB

ENDURASERIESCat.#TypeJobApprovalsWALL/BUILDING MOUNTSPECIFICATIONSPRODUCT IMAGE(S)Intended Use:The Endura is a ceiling surface mounted or pendant mounted parking structure luminaire with afield replaceable LED light-engine & optical bezelsystem. Internal components are totally enclosedin a rain-tight and corrosion-resistant die castaluminum housing. The Endura Luminaire isCSA listed and suitable for damp locations (wetlocation available on request).Construction: Die cast aluminum two-piece housing Shape of the top housing is designed as a birdnesting deterrent Die cast main (thermal) housing providesdirect-heat exchange between the LED lightengine and the cool outdoor air by drawingheat through integral heat channels and out tothe sculptured and functional luminairesurface. LED drivers are thermally isolated from themain housing, mechanically attachedand heat- sinked to the top housing. Main housing is designed with heat dissipatingfins for LED thermal management withoutthe use of metallic screens, cages, or fans Main and top housings are designed to hingeopen for easy mounting and easy accessInstallation: Top housing is designed with various boltpatterns for mounting to a recessed,surface or rigid-pendant hung 4” junction boxand rigid stem provided by others) After mounting the top housing to the junctionbox, the main housing is designed tohang and hinge closed after connecting themale and female quick connectors Mounting design permits a simple retrofit toexisting parking structure luminaires that utilizesurface mount or recessed junction boxesFinish IFS polyester powder-coat electro-statically applied and thermocured. IFS finish consists of a five stageiron phosphate chemical pretreatmentregimen with a polymer primer sealer,ovendry off, and top coated with a thermosetsuper TGIC polyester powder coat finish. The finish meets the AAMA 605.2performance specification which includespassing a 3000 hour salt spray test forcorrosion resistance and resists cracking orloss of adhesion per ASTM D522 and resistssurface impacts of up to 160 inch-pounds.Listings: The luminaire shall bear a CSA label and bemarked suitable for damp locations (standard).Luminaire may be specified for wet locations. This product is approved by the FloridaFish and Wildlife ConservationCommission.CAST COVERSeparate spec available 4" CONDUITSTEM MOUNTWarranty:ASSEMBLYyear limited warranty for more information visit:(BYFiveOTHERS)Occupancy SensorShown with SiteSync DIMENSIONSTopBottom5 1/2”Electrical: 120V through 277V, 50 Hz to 60 Hz. Endura comes standard with 70 CRI. Power factor is min 0.92 at full load. Optional 0 to 10 volt dimming drivers areavailable upon request. Component-to-component wiring within theluminaire may carry no more than 80%of rated load and is listed by UL for use at600VAC at 50 C or higher. Plug disconnects are listed by UL for use at600 VAC, 15A or higher. 15A rating applies toprimary (AC) side only. Surge protection - 20KAwww.beaconproducts.com/products/energeni In addition, Endura can be specified withSiteSync wireless control systemfor reduction in energy and maintenance costwhile optimizing light quality 24/7. Seeordering information or visit:www.hubbelllighting.com/sitesync/for more details12” sq.LED/Optics: Endura luminaire is supplied with an Opticalone piece cartridge system consisting of anLED engine, LED lamps, optics, gasketand stainless steel bezel Cartridge is held together with internal brassstandoffs soldered to the board so that it canbe field replaced as a one piece opticalsystem. Two-piece silicone and polycarbonate foamgasket ensures a weather-proof seal aroundeach individual LED and allows theEndura luminaire to be rated for high-pressurehose down applications. Optical cartridge is secured to the extrudedhousing with fasteners and a heat pad toensure thermal conductivity. The optics areheld in place without the use of adhesivesand the complete assemble is gasketed forhigh pressure hose down cleaning. Cartridge assembly is available in variouslighting distributions using TIR designed Acrylicoptical lenses over each LED.Controls/Options: Endura is available with an optional passiveinfrared (PIR) motion sensor capableof detecting motion 360 around theluminaire. When no motion is detected for thespecified time, the Motion Response systemreduces the wattage down to a factorypreset level, reducing light level accordingly.When motion is detected, the luminaire returnsto full wattage and full light output. Pleasecontact Beacon Products if projectrequirements vary from the standardconfigurations. Available with Energeni for optional setdimming with simple delay, or timed dimmingbased on hours of operation or time of night(see Energeni product page for more detailsSideIsometricCeiling MountCast coverStem Mountassembly(by others)3/4” " CAST J-BOX4” Cast j-boxCERTIFICATIONS/LISTINGSConsult FactoryBeacon Products 2041 58th Avenue Circle East Bradenton, FL 34203 Phone: 800-345-4928Due to our continued efforts to improve our products, product specifications are subject to change without notice. 2017 BEACON PRODUCTS, All Rights Reserved For more information visit our website: www.beaconproducts.com Printed in USA EDR-SPEC 10/17ENDURA

ORDERING INFORMATIONSERIESEDR EnduraENGINE-WATTS24NB-2727 Watts LED array24NB-5555 Watts LED array36NB-80ORDERING EXAMPLE: EDR/36NB-80/5K/T5W/UNV/MOB-4-50-15/BLLED COLOR113K 3000K4K 4000K5K 5000K(std.)80 Watts LED arrayOPTICST5R Type V,rectangularT5W Type V, wideT5QM Type V, squareVOLTAGEELECTRICAL OPTIONSUNV 120-277VPEC-120 photocell, button 120V347 347VPEC-208 photocell, button 208V480 480VPEC-240 photocell, button 240VPEC-277 photocell, button 277VmediumT5QN Type V, squarePlatinum silverBP4,8 0 C battery packHIGHER MOUNTINGAPPLICATIONS2X2 Type VNot available on 24NB-272Not available @347V or 480V input3Not available on 48NB-110436NB-80 only5When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni brochure andinstructions for setting table and options. Not available with sensor options.6Must specify group and zone information at time or order. See www.HubbellLighting.com/products/sitesync for further details.7Specify time delay; dimming level and mounting height.8Not available with SWP or SWPM control options9Not available with other control or sensor options10Specify mounting height11This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate spec available specs/specs files/Endura turtle LED spec sheet.pdfLight gray smoothpackwide1Dark bronzeBPC4,8 Cold weather batteryT5QW Type V, squareConcentratedSpot4X4 Type VConcentratedNarrow5X5 Type VConcentratedMedium5X3 Type VConcentratedRectangularBlack texturedWH White textured2PF1,2,8 Dual power feednarrow48NB-110 110 Watts LED arrayFINISHBLDBGYSPSCONTROL OPTIONSGENI-XX5,9 EnergeniSWP6,9 SiteSync WirelessSENSOR OPTIONSMOB3,7,9 OccupancyPre-CommissionSWPM6,7,9 SiteSync WirelessPre-Commission w/ MotionDetectionOCS9,10Sensor (33%or 50%dimmingOccupancySensor (on/off)Accessories and Services (Ordered Separately)Catalog NumberDescriptionSWUSB*SiteSync interface software loaded on USB flash drive foruse with owner supplied PC (Windows based only). IncludesSiteSync license, software and USB radio bridge node.SWTAB*Windows tablet and SiteSync interface software. Includestablet with preloaded software, SiteSync license and USBradio bridge node.SWBRG SiteSync USB radio bridge node only. Order if a replacement is required or if an extra bridge node is requested.PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lightingcontrol option, additional information will be required to complete the order. The SiteSync Commissioning Formor alternate schedule information must be completed. This form includes Project location, Group information, andOperating schedules. For more detailed information please visit www.hubbelllighting.com/products/sitesync/ orcontact Hubbell Lighting tech support at (800) 345-4928.SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens.Examples: V/SWPM-20F/BL* When ordering SiteSync at least one of these two interface options must be ordered per project. If needed, an additional Bridge Node can be ordered.SiteSync onlySiteSync with Motion ControlMOB ORDERING INFORMATION: When ordering a fixture with a dimming occupancy sensor (MOB), please specifythe appropriate information. These settings are specified in the ordering as shown in the example below. EDR/24NB-55/5K/T5R/UNV/MOB - 1or 50% -?to 30 min. - 33%/ BLHigh to Dim Delay Low Level Mounting Height (ft.)SiteSync Lighting Control is available fromour most popular brands in a broad range ofaward-winning product families.Beacon Products 2041 58th Avenue Circle East Bradenton, FL 34203 Phone: 800-345-4928Due to our continued efforts to improve our products, product specifications are subject to change without notice. 2015 BEACON PRODUCTS, All Rights Reserved For more information visit our website: www.beaconproducts.com Printed in USA EDR-SPEC 11/16

PHOTOMETRICS40‘40‘20‘Type V Square MediumEDR-48NB-110-T5QM20‘Type V Square pe V RectangularEDR-48NB-110-T5R4fc40‘Type V Square �2fc ‘20‘2fc20‘40‘1fc40‘.5fcDrive Lane DirectionELECTRICAL DATA# LED’S245K(5000K nominal, 70 7W55 W700 mA80 W110 WDISTRIBUTIONTYPELUMENS4K(4000K nominal, 70 CRI)3K(3000K nominal, 80 401120041084011030793401Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to berepresentative of the configurations shown. Actual performance may differ as a result of end-user environment and application.1Beacon Products 2041 58th Avenue Circle East Bradenton, FL 34203 Phone: 800-345-4928Due to our continued efforts to improve our products, product specifications are subject to change without notice. 2015 BEACON PRODUCTS, All Rights Reserved For more information visit our website: www.beaconproducts.com Printed in USA April 10, 2018 1:49 PMLPW1 B UG

ELECTRICAL DATA# OF LEDSNUMBEROFDRIVERS271242361481DRIVECURRENT INPUT VOLTAGE SYSTEM .920.40AMBIENT TEMPERATURE0 C32 F10 C50 F20 C68 F25 C77 F86 F30 C40 C104 F50 C122 FLUMEN MULTIPLIER1.021.011.001.001.000.990.98Use these factors to determine relative lumen output for average ambienttemperatures from 0-50 C (32-122 F).PROJECTED LUMEN MAINTENANCEAMBIENTTEMP.25 C / 77 FTM-21-11Calculated L7060,000100,000(HOURS)0.950.93 587,00010 25,0001.00 0.9750,0000.961Projected per IESNA TM-21-11Data references the extrapolated performance projections for the base model in a 40 Cambient, based on 10,000 hours of LED testing per IESNA LM-80-08.Beacon Products 2041 58th Avenue Circle East Bradenton, FL 34203 Phone: 800-345-4928Due to our continued efforts to improve our products, product specifications are subject to change without notice. 2015 BEACON PRODUCTS, All Rights Reserved For more information visit our website: www.beaconproducts.com Printed in USA EDR-SPEC 11/16