Transcription
1938 E Pomona St. Santa Ana, CA 92705 714.258.7535LaboratoryModular Lab BenchesFlammable & Corrosive CabinetsC-Frame Lab BenchesLaminar Flow HoodsFixed CaseworkFume HoodsStainless Steel CaseworkLab Accessoriesworkstationindustries.comMade in the USA
CaseworkPainted Steel CaseworkStainless Steel CaseworkOur steel painted metal cabinets are available in avariety of configurations to fit any laboratory layout.Cabinets can be used in wall, island and peninsulaconfigurations. Cabinet options include open,door, drawer and combination styles in both sittingand standing heights as well as different widths.Standard base, wall/upper, and tall storagecabinets widths are, 18”, 24”, 30’ 36, and 47”.Custom sizes are available upon request, consultthe factory. Available components include:Shelving reagent racks, with double slotteduprights or intergrated C2 modular uprights, addshelves, electrical, data or gas utilities to thereagent racks with interconnecting capability.Workstation Industries stainless steel casework isideal for areas or applications subject to frequentcleaning. WSI stainless steel casework isconstructed to the same specifications as ourpainted steel casework. The tough stainless steelsurface is also a logical alternative for areas subjectto heavy abrasion, impact, heat and general , clean rooms, photo labs, radioactiveapplications, biological, agricultural, petroleumand food labs, morgues, autopsy labs, highmoisture areas, sterile and constant temperaturerooms and areas where fire and abrasion areencountered.714.258.7535
BenchesTubular Steel Lab BenchesProduction benches (PB) are versatile componentsnecessary to any laboratory layout. At WSI ourproduction benches can be customized to meetany size requirements, including fixed or adjustableheight legs. Table top options include solidphenolic, epoxy resin, solid surface, butcher block,plastic laminate or stainless steel.Production benches can be converted to anassembly bench with additional options includingslotted uprights, 15A or 20A power strips (bencheswith attached power are UL listed), shelving, bookendbrackets, task lighting, plumbing fixtures, footrests,modesty panels, and tackboard. All benchesaccommodate suspended, mobile or base cabinetswith any drawer configuration.Modular Lab BenchesThe Concept 2000 Series single sided (C2) alongwith the C2 double sided workstations is our seriesof modular, versatile laboratory furniture. Additionalaccessories include plumbing fixtures, power polls,phenolic resin worksurface, suspended or mobilecabinets and shelving with bookend panels.Expansion can be achieved with additional adderbenches. This is an economical design approach tocreate continuous workstations for multiplepersonnel.Made in the USA
1938 E Pomona St. Santa Ana, CA 92705 714.258.7535Lam/FlowHoodsFume HoodsDuctless Fume/Flow HoodsWSI Fume hood structures meet NFPA, FM, ULstandards. Sash options include horizontal, vertical andcombination. Liner options include solid phenolic,poly-resin and stainless steel. Mounting optionsinclude standard metal base cabinets, flammable andcorrosive cabinets or tubular metal frames. Worksurface options include solid phenolic, epoxy-resinand stainless steel. WSI fume hoods come standardwith air flow meter, two 15A duplex outlets, blowerswitch, light switch, chain driven safety sash, white solidphenolic chemical resistant liner, powder coated finishand pre-wired to J-box. Plumbing service options areavailable. Add either standard storage base cabinets,flammable or corrosive storage cabinets with selfclosing doors.Designed for use inside an office environmentwithout an external exhaust fan system. Able tofilter light duty chemicals. Standard featuresinclude: Two 16 x 20 carbon filters, 1/4 hpmotor blower, single tube light fixture installedinside of hood, 8” hinged sash, plexiglas sidewalls, solid steel rear panel and 30” insidedimensions.Vertical FFU laminar flow hood bench. Optionalaccessories are: Built in work surface, slide inan existing bench, stainless steel or ESDprotected upgrade, drawers or electrical.Hood comes standard with a LED light undercounter light.workstationindustries.com
AccessoriesLab AccessoriesIn addition to your laboratory casework and fume hoods, WSI offers all the necessary accessories neededto complete your laboratory build out. WSI accessories include: Sinks Epoxy resin Reagent racks Power poles Plumbing faucets Solid Phenolic resin Electrical monuments Eye-wash Shelves, resin or steel Data in-put Drying racks/peg-boards Lab grade phenolic resin Utility raceways & chasesPlease visit our website for further details and specifications.workstationindustries.com
Workstation Industries has been a progressive manufacturer in the Laband technical furniture industries since 1995.Our basic philosophy is simple: Define our customer’s wants and needsand then produce quality workstations at a reasonable cost and leadtime.Our hands-on customer service assures that our customers are totallysatisfied with the product design, quality and workmanship, from start tofinish.We manufacture all of our products on site in over 25,000 square feet ofmanufacturing space IN THE UNITED STATES OF AMERICA.This provides us the opportunity to control 100% of the manufacturedproduct, thereby offering our clientele one of the best lead times inthe industry.We fabricate all sheet metal components, weld all frames, laminate allwork-surfaces and powder paint all finished goods. We have CNC sheetmetal and wood working equipment. Our products are UL Listed forstructural integrity and electrical safety.By controlling all facets of manufacturing, we afford our clients theluxury of custom designs and/or modifications within our existingproduct line while maintaining competitive pricing and outstandinglead times.“At Workstation Industriesno job is too small or too large”!workstationindustries.comMade in the USA714.258.7535
inside of hood, 8" hinged sash, plexiglas side walls, solid steel rear panel and 30" inside dimensions. Vertical FFU laminar flow hood bench. Optional accessories are: Built in work surface, slide in an existing bench, stainless steel or ESD protected upgrade, drawers or electrical. Hood comes standard with a LED light under counter light.
