WIXLIB

BOOKS STANDARDS APPARELPRODUCTS2019www.sspc.org

PAINTING MANUALSSSPC PAINTING MANUALSA. GOOD PAINTING PRACTICE VOL. 1, 5TH EDITION(PB-01601)Provides a detailed overview of preparing steel surfacesfor coating, involving the removal of physical surfacedefects, contaminants, and providing the specifiedsurface profile to promote coating adhesion.Table of contents includes: Corrosion of Metals, DesigningStructures for Good Coating Performance, Mechanisms ofCorrosion Control by Coatings, Coating Composition andFilm Formation, Cathodic Protection of Coated Structures,Coating Hot-Dip Galvanized Steel, Overview of Steel SurfacePreparation, Hand and Power Tool Cleaning, Non-MetallicAbrasives, Metallic Abrasives, Abrasive Blast Cleaning,Centrifugal Blast Cleaning, Wet Abrasive Blast and WaterjetCleaning, Soluble Salts: Critical Issues That Impact CoatingPerformance, Pickling, Chemical Stripping, Pliant MediaBlasting, Carbon Dioxide (Dry Ice) Blasting, Solvent/ChemicalPre-Cleaning, Dehumidification During Coating Operations,Application of Industrial Coatings, Coatings for Industrial SteelStructures, Polysiloxane Coatings, Elevated/High TemperatureCoatings and Coatings for Insulated Service, and more.B. SYSTEMS AND SPECIFICATIONS VOL. 2 (PB-00802)Contains SSPC standards for the cleaning andpreparation of steel and concrete surfaces, the selectionand application of protective coating systems, the basiccomposition requirements and performance capabilitiesof paints and coatings, qualification procedures, andother materials, processes, and technologies.Areas of expertise include: Surface Preparation Standards,Guides, and Specifications, SSPC/NACE joint TechnologyReports, Abrasive Specifications, Painting and Coating SystemsGuides and Specifications, Paint and Coatings Standards andSpecifications, and more.Members: 205.00Non-Members: 280.00C. CONCRETE COATING COUPONSET (PB-01901)SSPC’s new Concrete Coating TextureStandard establishes a classificationsystem for textures of finished coats ofapplied concrete flooring systems. Thisstandard is used in conjunction with a setof tactile comparators, that establish astandard terminology that can be used byowners, specifiers, and concrete flooringinstallers, to describe various coatingsurface textures.Members: 120.00Non-Members: 170.00Members: 200.00Non-Members: 250.00Want both SSPC Painting Manuals?Members: 365.00Non-Members: 490.00SSPC POCKET GUIDE TO COATING INFORMATIONThis Pocket Guide is a handy reference to charts, standards,and calculations frequently used during surface preparation andcoating application.Available in Spanish & EnglishEnglish PB-01301Spanish PB-01301-SPMembers: 15.00 or 2 for 25.00Non-Members: 23.00WWW.SSPC.ORGSSPC PRODUCTS CATALOG3

SSPC VISUAL STANDARDSA.B.C.D.E.SSPC VIS GUIDESA. SSPC-VIS 1 (PB-00212)Guide and Reference Photographsfor Steel Surfaces Prepared by DryAbrasive Blast CleaningC. SSPC-VIS 3 (PB-00407)Guide and Reference Photographs forSteel Surfaces Prepared by Hand andPower Tool CleaningSSPC’s most widely used visualreference features over 50 full-colorphotos of previously coated anduncoated, rusted steel surfaces beforeand after dry abrasive blast cleaning.Cleanliness requirements for conditionsdepicted are defined by the SSPCsurface preparation specifications forwhite metal (SP 5/NACE 1), near-white(SP 10/NACE 2), commercial (SP 6/NACE 3), industrial (SP 14/NACE 8), andbrush-off (SP 7/NACE 4) blast finishes.Contains a series of 43 full-color referencephotographs to be used as a supplementto the SSPC standards for hand and powertool cleaned steel. Shows a total of sevendifferent steel surfaces (four uncoatedand three previously coated) before andafter hand tool cleaning (SP 2), power toolcleaning with power wire brushes andsanding discs (SP 3), power tool cleaningto bare metal (SP 11), and commercialgrade power tool cleaning (SP 15).Available in Spanish & EnglishMembers: 120.00Non-Members: 170.00Available in Spanish & EnglishMembers: 120.00Non-Members: 170.00D. SSPC-VIS 4 (PB-00105)Guide and Reference Photographsfor Steel Surfaces Prepared byWaterjettingB. SSPC-VIS 2 (PB-00008)Standard Method of EvaluatingDegree of Rusting on PaintingSteel SurfacesSSPC’s popular rust standard features aseries of 27 full color images and 27 blackand white diagrams representing variousdegrees of spot, general, and pinpointrusting on painted steel surfaces.Members: 120.00Non-Members: 170.00Shows a total of six different steelsurfaces (two uncoated and fourpreviously coated) before and afterwaterjetting. Photographs illustratefour separate degrees of cleaning (WJ1, WJ 2, WJ 3, and WJ 4) for eachinitial condition, with additional photosthat depict the appearance light,moderate, and heavy flash rustafter cleaning.Members: 120.00Non-Members: 170.00F.G.E. SSPC-VIS 5 (PB-00106)Guide and Reference Photographsfor Steel Surfaces Prepared by WetAbrasive Blast CleaningShows two uncoated, rusted steelsurfaces (Conditions C and D) beforeand after wet abrasive blast cleaning.Photographs illustrate two degrees ofcleaning (WAB 6 and WAB 10) for eachinitial condition, with additional photosthat depict the appearance of light,moderate, and heavy flash rust aftercleaning. Also contains a written guideto the use of reference photographs andadditional explanatory notes. Cleanlinessrequirements for conditions depicted aredefined by the joint SSPC/NACE surfacepreparation specifications for commercial(SP 6/NACE 3) and near-white blastcleaning (SP 10/NACE 2).Members: 120.00Non-Members: 170.00REFERENCE GUIDESF. FLASH RUST EVALUATIONGUIDELINES (PB-01001)This is a non-mandatory guide withtext and reference photographsdescribing how to perform a fieldassessment of the amount of flashrust on a steel surface by brushingthe surface with a paint brushwrapped with a white cotton cloth andevaluating the color and amount ofrust that transfers to the cloth.Members: 50.00Non-Members: 65.00G. ISO 8501:2007 (PB-00701)This international standard discussesthe preparation of steel for theacceptance of paints and coatingsand provides a visual reference for theassessment of surfaces prior to andafter cleaning.Published by the InternationalOrganization for Standardization (ISO)in collaboration with the SwedishStandards Institute (SIS).Members: 425.00Non-Members: 465.004SSPC PRODUCTS CATALOGWWW.SSPC.ORG

Using Coatings Inspection InstrumentsDiscusses the role and qualifications of inspection personnel,the preparation and review of inspection documents, basicinspection practice, the inspection of conventional andspecialty coating and lining materials, the unique inspectionrequirements of various facilities and structures, safety, fieldtest methods and instruments used by coating inspectors,and other important topics. (PB-00314)Members: 140.00Non-Members: 200.00Each of the book’s 11 sections presents full-colorimages, guided notes, and workshops describing thestep-by-step use of instruments, visual standards andtest kits for measuring ambient conditions and surfacetemperature, measuring surface profile depth, assessingsurface cleanliness, sampling and testing for soluble saltcontamination, calculating and measuring wet film thickness,measuring coating thickness, adhesion testing, detectingpinholes and holidays in coatings and linings, and more.Includes instructions for administering workshops, a glossaryof terms, and an index of industry standards. (PB-00308)Members: 95.00Corrosion and CoatingsSelecting Coatings for Industrial andMarine StructuresInspection of Coatings and LiningsCOATING INSPECTION & TECHNOLOGYThis book covers selection criteria for coatings and coatingssystems, through a review of the basic components ofcoatings and handy charts that match coating systems andservice environments. End-users will find the sections onapplication, safety, and environmental issues especiallypertinent to their everyday concerns. Chapters coveranti-fouling, industrial powder coatings, and thermal spray(metallizing) for steel. (PB-00801)Members: 120.00Non-Members: 145.00Introduces the various mechanisms and forms of corrosion,the prevention and control of corrosion through the useof coatings, and other practices for maintaining corrosioncontrol. Individual topics include: mechanisms of corrosioncontrol by protective coatings, composition and filmformation of organic coatings, properties of generic coatingtypes, the economics of corrosion control, and more.(PB-09808)Members: 75.00Non-Members: 100.00Magnifier and 3 Disc SetJ.H.K.Instrument designed for the visualestimation of the surface profile(texture) of abrasive blast cleanedsteel. The complete set includesan illuminated, hand-held magnifierand three metal discs replicatingsurfaces cleaned with variousgrades of grit, sand, and shot.(PB-07005)H. Shot Blast Disc (PB-07001) 127.00J. Sand Blast Disc (PB-07002) 127.00K. Grit Blast Disc (PB-07003) 127.00 425.00Magnifier Only 50.00(PB-07004)WWW.SSPC.ORGSSPC PRODUCTS CATALOG5

CONCRETEA.B.C.CONCRETE PUBLICATIONSA. CONCRETE REPAIR MANUAL(PB-00306)Published by ACI International, theBuilding Research Establishment,the Concrete Society, andthe International ConcreteRepair Institute.With more than 2,000 pages ofstandards, guides, and other technicaldocuments from SSPC, ACI, ASTM,ICRI and other associations, thistwo-volume set is the most completecollection of concrete repair informationever assembled. Topics includecondition evaluation, materials forrepair, surface preparation, applicationmethods, corrosion management,structural strengthening, protectionmethods, contractual guidance,and more.B. FUNDAMENTALS OF CLEANINGAND COATING CONCRETE(PB-00110)Presents a thorough examinationof concrete’s physical and chemicalproperties including procedures formixing, placement, consolidation,finishing, curing, and the causes andprevention of concrete deterioration.Contains detailed information on surfacecleaning, repair, and preparation, theselection, application, and performancecapabilities of protective coating and liningsystems, inspection, failure analysis,and more. Additional features include aglossary of terms, a detailed referencebibliography, and other resource materials.Also available on CD-ROM withadditional material.Members: 75.00Non-Members: 125.00C. CONCRETE COATINGASSESSMENT GUIDE (PB-00111)Organized according to the stepstypically followed in a concrete coatingcondition assessment and containinga special section of color illustrationsto support identification of variousconcrete conditions that may beencountered in the field. This guideincludes a comprehensive glossary thatdefines key terms used in conditionassessments and an appendix ofremovable sample forms that can beused to supplement those examplesgiven in the text.Members: 45.00Non-Members: 55.00Volumes sold only as a setMembers: 180.00Non-Members: 225.00ICRI TECHNICAL GUIDELINE NO. 03732Written and visual guide to selecting an appropriate methodof concrete surface preparation prior to the installation ofa coating, lining, or other protective system. Discussesthe unique aspects of 12 different surface preparationand cleaning methods: detergent scrubbing, low-pressurewater cleaning, acid etching, grinding, abrasive blasting,shotblasting, scarifying, needle scaling, high- and ultrahighpressure waterjetting, scabbling, flame blasting, and milling/rotomilling. (PB-09713)Members: 150.00Non-Members: 206.006SSPC PRODUCTS CATALOGWWW.SSPC.ORG