Transcription
Caldera 7Silicone Heat Transfer FluidHeat Transfer FluidsCaldera 7 is a premium silicone heat transfer fluid. It is formulated with an advanced additive system for superiorperformance and also protects against oxidation, wear, rust and corrosion. Compatible with most silicone-based fluidtechnology on the market, Caldera 7 can be mixed at any ratio without issue. Caldera 7 is stable up to a maximum filmtemperature of 691 F (366 C), making it ideal for the most intensive heat transfer applications.Applications Open-bath systemsTypical PropertiesCaldera 7Minimum Temperature, F ( C)-63 (-53)Maximum Film Temperature, F ( C)691 (366)Maximum Bulk Temperature,Closed Systems, F ( C)601 (316)Maximum Bulk Temperature,Open Systems, F ( C)400 (204)Pour Point, F ( C)-87 (-66) Ideal for open bath systemsFlash Point , F ( C)615 (324) Impervious to oxidationIdeal for systems prone to premature fluid degradationFire Point, F ( C)637 (336)Autoignition Point, F ( C)819 (437) Closed loop systems with a maximum bulktemperature of 601 F (316 C) Open loop systems with a maximum bulktemperature of 400 F (204 C)Performance AdvantagesTemperature RangeFluid properties are typical results and should not serve as a sole resource for determining the correct fluid fora particular application. Please consult an Isel representative to ensure that the product is the correct choicefor the application. Revised 9/2018 - SAll products manufactured in the USAThermal Expansion Coefficient, %/ F0.0583Thermal Conductivity @ 100 F, BTU/h-ft-F0.0769Thermal Conductivity @ 500 F, BTU/h-ft-F0.0584Heat Capacity @ 100 F, BTU/lb-F0.409Heat Capacity @ 500 F, BTU/lb-F0.510Distillation Range (ASTM D2887), 10% F921Distillation Range (ASTM D2887), 90% F1254toll-free: 1-800-503-9533phone: 904-378-3232email: sales@iselinc.comweb: www.calderafluids.com
Caldera 7Silicone Heat Transfer FluidDensityThermal Conductivity700.10600.08BTU/hr-F-ftlb/ft re5006000.00-1007000100Kinematic 0700Temperature0100Dynamic Viscosity200300400TemperatureVapor .60.41000-100300TemperatureHeat 007000.0-1000100200300400TemperatureFluid properties are typical results and should not serve as a sole resource for determining the correct fluid for a particular application. Please consult an Isel representative to ensure that the product is thecorrect choice for the application. Revised 9/2018 - SAll products manufactured in the USA
Caldera 7Silicone Heat Transfer FluidTemperature( F)Density(lb/ft 0.00Fluid properties are typical results and should not serve as a sole resource for determining the correct fluid for a particular application. Please consult an Isel representative to ensure that the product is thecorrect choice for the application. Revised 9/2018 - SAll products manufactured in the USA
Caldera 7Silicone Heat Transfer FluidTemperature( F)Density(lb/ft 0.0670.4630.0031557.859.889.160.0670.4650.00Fluid properties are typical results and should not serve as a sole resource for determining the correct fluid for a particular application. Please consult an Isel representative to ensure that the product is thecorrect choice for the application. Revised 9/2018 - SAll products manufactured in the USA
Caldera 7Silicone Heat Transfer FluidTemperature( F)Density(lb/ft 15.124.600.0580.5130.30Fluid properties are typical results and should not serve as a sole resource for determining the correct fluid for a particular application. Please consult an Isel representative to ensure that the product is thecorrect choice for the application. Revised 9/2018 - SAll products manufactured in the USA
Caldera 7Silicone Heat Transfer FluidTemperature( F)Density(lb/ft .535266 Highway AvenueJacksonville, FL 32254USAtoll-free: 1-800-503-9533phone: 904-378-3232fax:904-378-9696email: sales@iselinc.comweb: www.calderafluids.comFluid properties are typical results and should not serve as a sole resource for determining the correct fluid for a particular application. Please consult an Isel representative to ensure that the product is thecorrect choice for the application. Revised 9/2018 - SAll products manufactured in the USA
Compatible with most silicone-based fluid technology on the market, Caldera 7 can be mixed at any ratio without issue. Caldera 7 is stable up to a maximum film temperature of 691 F (366 C), making it ideal for the most intensive heat transfer applications. Heat Transfer Fluids Typical Properties Caldera 7 Minimum Temperature, F ( C) -63 (-53)
