Transcription
AMPHENOL CORPORATIONAmphenol IndustrialPhone: 888-364-9011191 Delaware AvenueSidney, NY 13838-1395www.amphenol-industrial.comNotice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believedto be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made withoutrepresentation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that othermeasures may not be required. Specifications are typical and may not apply to all connectors.HKA 1-2016Amphenol 97 Series Connectors are UL recognized and CSA recognized.
Amphenol PT SeriesMiniature Cylindrical enol 97 Series Connectors are UL recognized and CSA recognized.
Table of ContentsIntroduction, Amphenol Miniature CylindricalPageGeneral Information, Design Flexibility . . . . . . . . . . . . . . . . . . . 1, 2Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 3Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1Bayonet Coupling, Solder ContactsGeneral Information, Specifications, Service Class . . . . . . . . . . . 11, 12PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . . 13PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . . 14PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . 15PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . . 16PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . 17PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 18PT Connectors with Printed Circuit Board Contacts box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . . 19PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . 20General Information, Specifications - PT hermetic . . . . . . . . . . . . . 21PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . . . . . . 22PT02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 23PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . . . . . . 24PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . . 25PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1If more information is needed concerning thecon nectors covered in this publication, or if thereare special application needs, please contact:Amphenol CorporationAmphenol Industrial Operations191 Delaware AvenueSidney, New York 13838-1395Telephone: 888-364-9011Fax: 520-397-7169Please go to the Amphenol websites to view,download and save this catalog and most all ofAmphenol interconnection product literature.www.amphenol-industrial.comSome miniature connector styles are availablein RoHS Compliant versions. Please contactAmphenol Industrial Operations for moreinformation.Bayonet Coupling, Crimp ContactsGeneral Information, Specifications, Service Class . . . . . . . . . . . 26, 27PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . . . . 28MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . 29PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . . . . . 30PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . . . . . 31MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . . 32PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . . . . 33PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . . . . . 34PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 35PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . . . 36Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Contacts, Power and Thermocouple Crimp . . . . . . . . . . . . . . . . . . . . 43Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-48Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . . . 50Proprietary/MIL-DTL-26482 Series 1 connectors covered in thiscatalog are widely used in gen eral duty and environmentalapplications, both industrial and military.Markets that use this family of connectors include: Instrumentation Monitoring Equipment Machine Tool, Factory Automation Communications Geophysical Industrial Controls and Robotics Oil and Petrochemical Industries Rail/Mass Transit Military/AerospaceAmphenol operates Quality Systems that arecer tified to ISO9001: 2008 by third party registrars.NOTE:The connector products in this brochure were formerlyknown as Bendix products. These products are nowmanufactured and sold under the Amphenol brandname. The name “Amphenol” will replace the name“Bendix” on products and literature in the future.NOTE:The Miniature MIL-DTL-26482, Series 2 connectorsPTS-DR and MS/PTS-DR (formerly in this catalog) areno longer supplied with these designations. Amphenolnow supplies the Amphenol /Matrix MIL-DTL-26482,Series 2. (Military numbers include MS3470 - MS3472,MS3474, - MS3476).
Amphenol Miniature Cylindrical ConnectorsProprietary/MIL-DTL-26482, Series 1Amphenol Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. Theseminiature connectors, are available in several series, each with varying design characteristics and customer options to meet costcon siderations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified toMIL-DTL-26482, Series 1, and in addition there are several proprietary styles.Common features of all styles: All are for general duty applications and environmental sealing is achieved with the grommet and clamp design. Operating temperature is from –55 C to 125 ; Operating voltage to 1000 VAC (RMS) at sea level. Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide anindefinite shelf life. All have resilient inserts which provide high dielectric strength and moisture barrier. A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles.Bayonet Coupling with Solder Contact TerminationPT Solderjam nut receptacle andmated straight plugPT, MS/PT (solder) MS and proprietary versions Factory installed solder contacts 3 point bayonet coupling and 5 key/keyway mating. Intermateable with all miniature series connectors. MS/PT meets MIL-DTL-26482 Series 1, service classes E, F and P. MS/PT is UL recognized.SP (solder) SP Series is a modification of the PT with same features except awider flange for back panel mountingOptions 7 shell styles with 60 insert patterns Hermetic seal (glass fusion)recepta cle styles available Pressurized thru bulkheadrecepta cle style available Pre-installed coax solder contactsare available Printed circuit board contactsare availableBayonet Coupling with Crimp Contact TerminationPT Solderwall mount receptaclePT-SE, MS/PT-SE (crimp) MS and proprietary versions Crimp rear insertable/front release contact termination. (closed entrysocket insert prevents probe damage). 3 point bayonet coupling and 5 key/keyway mating. Intermateable with all miniature series connectors. MS/PT-SE meets MIL-DTL-26482 Series 1, service classes E, F, P.SP-SE (crimp) Modification of the PT-SE with wider flange for back panel mountingPT-SE Crimpwall mount receptacleand mated straight plug1Options 6 shell styles with 47 insert patterns Coax and thermocouple contactsare available
Amphenol Miniature Cylindricaldesign flexibilityThe large family of miniature proprietary and MS style connectors provides formany optional features and designs. In addition to the choices of bayonet orthreaded shells, solder or crimp termination within the style variations, there areadditional options that are shown here.HermeticsHermetically sealed receptacles have fused compression glass sealedinserts which provide envionrmental moisture sealing. There are threehermetic styles within the PT bayonet series.Coaxial ContactsAmphenol Miniature connectors can incorporate shielded coaxcontacts. Size 8 and 12 crimp coax contacts are available in PT-SE,SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coaxcontacts are available in PT, SP,MS/PT connectors. See coax contactinformation pages at the end of this catalog.PT Connector with HermeticSeal Insert and Coax ContactsPT Connector with PC TailContactsPrinted Circuit Board Tail ContactsPT bayonet connectors in box mounting receptacle and jam nut receptacle styles areavail able with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenolfor further infor mation.Flex CircuitryFlex termination assemblies for attaching cylindrical connectors to printed circuit boardsare available through the Amphenol division ACT, Advanced Circuit Technology. Flex canbe used with miniature 26482 connectors and it can be designed to meet specific length,current carrying capacity and to fit the precise geometric shape of the connector to boardpackage. Flex circuity plugs into a printed circuit board and creates a self-locking terminalpad which eliminates the need for an additional interconnect to the PCB.PT Connector with FlexFilter ProtectionAmphenol offers the FPT Series which combines the miniature PT series with an EMIfilter. Designed to provide EMI protection for sensitive circuits, each circuit is individuallyfiltered within the con nector, eliminating the need for costly and bulky exterior networkfilters. Filter contacts are available in MF, HF, VHF, and UHF ranges and areintermateable and intermountable with MIL-DTL-26482 con nectors. For furtherinformation see catalog 12-120, Amphenol EMI Filter Transient Protection Connectors.PT Connector with EMIFilter ProtectionOvermolded CableOvermold seals and cables can be designed for almost any industrial application.A variety of materials are available: neoprene, hypalon and others; and a variety oflengths can be designed to meet customer specifications. Overmold seals to the rear ofthe connector and to the cable jacket providing moisture sealing.PT Connector with Overmolded Cable2
Amphenol Miniature Cylindricalconnector selection guideThe accompanying chart is provided to assist the user in selectingthe appropriate type of miniature connector to meet the applicationrequirements. Further information can be found in specific sectionsof this ctsPTMS/PTSPooooo ** ** SolderCrimpMS/PT-SE Crimp RI/FRContact d Finishes††Olive Drab Cadmium (003)RemovableAnodic Coated (005)Temperature RangeResilient Dielectric (–55 C to 125 C)Wide Mounting FlangeHermetic Seal * * * * PT-SESHELL STYLE AVAILABILITYWall Mounting Receptacle “00”Cable Connecting Receptacle “01” ***Box Mounting Receptacle “02”Straight Plug “06”Jam Nut Receptacle “07”Thru-bulkhead Receptacle “TB”Solder Mount Receptacle “I”90 Plug “08”RI/FR Rear Insertion/Front Releasable† o intermates with o†† Optional finishes available. See “how to order” sections.* Available in hermetic version** Dual mounting holes*** This connector style is sometimes referred to as a cable connecting “plug.”It does, however, mate with either a straight or 90 degree plug.3*
Amphenol Miniature Cylindricalinsert availabilitySolder TerminationInsertArrangement MS/PT6-1Crimp ntact PX14-91 XX23XX*518-8XXXXX1118-30XXXX*X30*Not available in MS version**Flashover voltage 5,000 VAC (RMS)***1500 VAC (RMS)S designates Socket insert I1IP designates Pin insert only.†Size 12 contacts for #10 wire††Not presently tooled†††Contacts must be ordered separately4
Amphenol Miniature Cylindricalinsert availability, cont.Solder TerminationInsertArrangement MS/PT18-32XCrimp TerminationPTSPHermeticPTMS-PTXXX18-71Contact XX1418-75XX4XX18-7620161218-91 HVI8106X*66X161Coax, II4Coax4N/A38ServiceRating1II2Coax, 114107720-7020-90 1II25II22-41XXXXX412722-55XXXXX5555XX19136I, Coax927I, 6124-71XXXXX45147X6161494561*Not available in MS version**Flashover voltage 5,000 VAC (RMS)***1500 VAC 4I4II22N/A5Coax†Size 12 contacts for #10 wire††Not presently tooled†††Contacts must be ordered separately5
Amphenol Miniature Cylindricalalternate positioningABABPosition WPosition 5180Position ZInsert RotationDegreesWPosition YViews looking into front face of pin insert or rear of socket insert.Insert RotationShellSizeABATo avoid cross-plugging problems in applications requiringthe use of more than one miniature cylindrical connector ofthe same size and arrangement, alternate insert rotationsare available as indicated in the accompanying chart.As shown in the diagram at right, the front face of the pininsert is rotated within the shell in a clockwise direction fromthe normal shell key. The socket insert would be rotatedcounterclockwise the same number of degrees in respect tothe normal shell key.BAlternate ��314312270339––––324281–* Available in Hermetic Class6
Amphenol Miniature Cylindricalinsert arrangementsfront face of pin inserts illustratedC ABInsert ArrangementService RatingNumber of ContactsContact Size6-1I120ED8-2I220Insert ArrangementService RatingNumber of ContactsContact Size10-5I520GKFInsert ArrangementService RatingNumber of ContactsContact SizeAJCJE D12-10I1020HGJBKFELCD14-12I8 420 16EKNPKJL AMRHFBDFE14-15I14 120 14-4I412AMLBRFDAEDBCHBFDGCE12-98I1020PGAHGRN CCACFHLM12-14I1420AMInsert ArrangementService RatingNumber of ContactsContact SizeDB10-70Coax18 CoaxBA10-2I216AFD10-6I620H A ADABATHSGF14-19I1920ABR14-5II516CBEDEDD14-8I6220 12AABCCBC14-22I1 420 1214-71I3 1168 Coax14-91HVFlashover5,000 VAC (RMS)320
CylindricalAmphenol Miniature Cylindricalinsert arrangementsfront face of pin inserts illustratedAADLHCCE14-AA16-8Number of Contacts48IContact SizeANJLPHPBNCMDMGLENumber of ContactsContact Size16-768520 12*2 Coax*2120YKIWXJ16-23HEJEG20N/A20VEDAHFCBKHC112 HGDcZFG20THV22WJUWHE16-99Flashover1.500 VAC (RMS)1JBZXKFService RatingYSMTAPCUbAARCBTN aD16KZARSPBSXII12ARYKDInsert ArrangementService RatingInsert 216*Contact Positions OptionalRPSAdBTcUebNZLKInsert ArrangementVfgaMEWXYFGHJPDNMNumber of Contacts29Contact SizeI20AVfcghbaKZHJCCEFE32820Contact Size4AGCFEBBDDENumber of ContactsN/ABFService RatingE20 12 CoaxACInsert Arrangement108 CoaxHBD18-72116CNF18-71II, ice RatingUedLTSRC18-75Coax48 Coax18-763II18-80112 Coax 8 Coax89I, Coax62028 CoaxC18-91 HVFlashover5,000 VAC (RMS)620
CylindricalAmphenol Miniature Cylindricalinsert arrangementsfront face of pin inserts illustratedLAKLBMKNSCJHDHGFaTGS20-25Number of Contacts162425I16NbLcXKRPFH20-27Number of 0CPXDUJ20-90Number of ContactsJF721258 bKYZaGHJ22-3422-36Number of Contacts323436Contact jVWjlWCh22-32IXBInsert ArrangementService J22-2520bGH22-21CoaxContact SizeE22-7Hi-Voltage7DUEGInsert ArrangementaVFHService RatingCTWKTBSZbLSDCDYCARMR48 20-26BXW20kshSGjiTEAWVCanpfIContact SizeBYrhNGInsert ArrangementService ontact SizeFGK20-16IIPAVTNUaInsert ArrangementService L22-412720I1416K
CylindricalAmphenol Miniature Cylindricalinsert arrangementsfront face of pin inserts illustratedkRmjNiBVnXqBBHHyFFDDhLwvfeInsert Arrangement22-55Number of Contacts55Service RatingETKNGRHEF22-70132028 CoaxNBFYKaJbgcdCHInsert Arrangement22-7822-9624-31Number of Contacts7731Coax8 CoaxWvGGsrUqTPPMMEEpSLLDDnRPCCBBmkNM24-61Number of Contacts61WEFgzGhAAInsert ArrangementContact 4-71IAFg GnT20FepU47DAABB24-79218 CoaxCoax20Symbol58 CoaxContact LegendContact Size201612HV12 Coax8 rqVAtsXDexKKYCdJJNNaZBDdAADD16# 10 wireCcyI12 forwHHFFVService RatingIIBpTFDDuqEUGtrUTusVDSAbtWCReWX38 CoaxaZQfXC16YPVEEN/A420BZEXMDFALGcN128 CoaxMAC22-72720AbP22-71I, Coax6GaTDI, CoaxBZUGCGFYLVERHAContact SizeBSJGDPS20Service RatingKBCVJIContact 2 Coax
Amphenol PT, SP, MS/PTProprietary/MIL-DTL-26482, Series 1bayonet coupling and solder terminationwall mountingreceptaclecable connectingreceptacle*Amphenol solder contact miniature cylindrical connectors meet the mostcritical application needs. Design versatility combined with high reliabilityperformance makes these series of Miniature Cylindrical Connectors ideal forenviron mental sealing or pressurized applications.The MS/PT Series is qualified to MIL-DTL-26482, Series 1 and has all the outstandingdesign characteristics and quality of the PT Series. The SP Series is a modification ofthe PT, providing special shells with a wide mounting flange for back panel mounting.A corrosion resistant electrically conductive finish of cadmium plate with an olive drabchromate after-treatment is used on the PT and MS/PT. The SP is given a durablenon-conductive hard anodic “Alumilite” coating which provides abrasion protectionand resis tance to corrosion.**NEW** 500 hour corrosion resistance, RoHS compliant harsh environmentconductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a LightGun Metal Gray appearance.box mountingreceptacleShell components for these series are aluminum. The dependable 5 key/keywaypolarization with bayonet lock coupling assures pos itive mating with no chance of crossplugging. Spring tension pro vided by a wave washer in the coupling nut ensuresmaintenance of interfacial seal between mating halves.Both the insert and main joint gasket are molded from resilient neoprene. This providesexcellent moisture sealing at the gasket and superior electrical isolation of the contactin the insert.straight plugjam nutreceptacleBoth pins and sockets are machined from a copper alloy and are gold plated. This goldplating eliminates contact corrosion and offers an indefinite shelf life. Socket contactsfor these series are a closed entry design. A breakaway style plug is available in the PTsolder series. Hermetics receptacles are available in PT and MS/PT solder series.Receptacles with printed circuit board contacts are also available.PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5.The PT, SP and MS/PT Series are intermateable and intermount able with all existingMiniature Cylindrical Series connectors.Refer to pages 4-10 for insert arrangement availability.PT, SP, MS/PTTable 1: CONTACT DATA/CONNECTOR RATINGSContact Specificationsthru livolt Drop†Solder WellDiameterSolder WellDepth.046 .004–.000.125 .031–.000207.5551613.0501223.042.078 .005–.003 .004.116–.002.188 .031–.000 .031.188–.000Service RatingRecommendedOperatingAC Voltageat Sea 500375200II1,0002,300750500200ServiceRating11Test Voltage AC (RMS), 60 cps† Silver plated wireper MILDTL-26482* This connectorstyle is sometimesreferred to as acable connecting“plug.” It does,however, matewith a straight or90 degree plug.
PT, SP Service ClassesPT and SP connectors are available in the serviceclasses listed below. Each class, with the exception ofhermetic, offers one or more means of terminating orsupporting a cable or wire bundle.“A”“A”general dutyGeneral duty; back shell is threaded for con duit attachment of MS3057 cable clamp“A” (SR) General duty, with strain relief clamp for cableor wire bundle support“C”“E”Pressurized receptacle; less than 1 cu. in. perhour leakage at 30 psi over a tempera turerange of –65 F to 257 FEnvironmental resistant connectors - sup plied with a multi-holed grommet and clamp ing nut for moisture-proofing individual openwires“E” (SR),MS / “F”strain relief“E” (SR) Environmental resistant strain relief clampand grommet for moisture proofing individualwires; provides added wire bundle support“P”Translucent nylon boot for retaining cus tomer-applied potting compounds; held inplace by a threaded ring“P” (SR) Strain relief clamp suitable for retaining cus tomer applied potting compounds, with pro vision for wire support“PG”“H”*“E”,MS / “E”open wire sealCompressing cable gland for moisture proofing jacketed cables.Hermetically sealed with compression glassinserts (see pages 22-25)Style with printed circuit board contacts- see page 20.MS/PT Service Classes“P”,MS / “P”potting bootThe MS/PT Miniature connector is available in thefol lowing certified service classes:“E”Environmental resistant connectors - sup plied with a multi-holed grommet and clamp ing nut for moisture-proofing individual openwires“F”“J”“P”Grommet seal with strain relief clampCompressing clamp and neoprene gland formoisture proofing multi-conductor jacketedcable and strain relief. Telescoping sleeves(MS 3420A) can be used to adapt to cablessmaller than minimum close-down.“PG”cable glandsealTranslucent nylon boot for retaining cus tomer-applied potting compounds; held inplace by a threaded ring12
PT00 (MS3110)SP00wall mounting receptacleSRPT.120 .005 Dia.(.147 .005 Dia., size 24)SP.150 .005 Dia.(TP)M4 HolesR SLQA(TP)“PG” Cable Gland SealKTERMINATION ASSEMBLIES“A” General Duty/“C” Pressurized“LLZ“A” (SR), “E” (SR), “P” (SR),MS / “F” Strain Relief“E” Open Wire SealLV“P” Potting BootNLLDPT00PG-XX-XXXNGDHNDPT00A-XX-XXX (SR)SP00A-XX-XXX (SR)PT00E-XX-XXX (SR)SP00E-XX-XXX (SR)PT00P-XX-XXX (SR)SP00P-XX-XXX (SR)MS3110F-XX-XXXTo complete part number see how to order on page 25.n (MMC) located within .0025 of (TP)Receptacle Front 7501.875A 51.500K XXXSP00P-XX-XXXMS3110P-XX-XXXPURCNDRELEASED / Dec . 21 2015, 2:09:12 PMMS3110J-XX-XXXReceptacle Side ViewM .010Q–.000LThreadMax.PTSPClass 2A.524 .906.524 .906.524 .906.524 .906.524 .906.524 .906.524 .906.650 1.125.650 1.125.683 1.188Class “A” (SR), “E” (SR), “P” (SR), MS / “F”ShellCSize Thread“J” Cable 1618202224DC.375 .589Class “E”, MS / 9.3125-32 NEF.4375-28 UNEF.5625-24 NEF.6875-24 NEF.8125-20 UNEF.9375-20 UNEF1.0625-18 NEF1.1875-18 NEF1.3125-18 NEF1.4375-18 NEFClass “P”, MS / .274All dimensions for reference 31.531.498Class “A”, “C”DMin.NMax.438 .175 1.553 .462.438 .297 1.553 .590.438 .421 1.553 .717.438 .546 1.553 .834.438 .663 1.553 .970.438 .787 1.553 1.088.438 .879 1.553 1.216.531 1.014 1.703 1.332.531 1.134 1.703 1.460.498 1.259 1.765 1.585Class “J”DNClosed Free 2.4112.5992.9433.1723.6103.7663.985VThreadClass A.3750-32 NEF.5000-28 UNEF.6250-24 NEF.7500-20 UNEF.8750-20 UNEF1.0000-20 UNEF1.1875-18 NEF1.1875-18 NEF1.4375-18 NEF1.4375-18 NEFClass 1.180
PT01 (MS3111)cable connecting receptacleLSYSQMA“PG” Cable Gland SealKTERMINATION ASSEMBLIES“A” General Duty“A” (SR), “E” (SR), “P” (SR),MS / “F” Strain ReliefLNZ“E” Open Wire SealLVL“P” Potting BootNLLPT01PG-XX-XXXDGD HNNND“J” Cable SealXLC.375 MINPURCHAPT01A-XX-XXX (SR)PT01E-XX-XXX (SR)PT01P-XX-XXX XX-XXXPT01P-XX-XXXMS3111P-XX-XXXNRecept. Front View681012141618202224S 8Y 12A 51.500K 3Class “A” (SR), “E” (SR), “P” (SR), MS / “F”ShellCSize 2.406MS3111-XX-XXXReceptacle Side ViewMQL .016ThreadMax.–.000Class 00.400.400.400.400.400.535.535.568.3125-32 NEF.4375-28 UNEF.5625-24 NEF.6875-24 NEF.8125-20 UNEF.9375-20 UNEF1.0625-18 NEF1.1875-18 NEF1.3125-18 NEF1.4375-18 NEFClass “E”, MS / 161.5161.578DRELEASED / Dec . 21 2015, 2:09:12 PMNote: This connector style is sometimes referred to as a cable connecting “plug”.It does, however, mate with either a straight or 90 degree plug.To complete part number see how to order on page 011.4301.555Class 1.166Class “P”, MS / .274All dimensions for reference 561.6561.717NMax.484.608.734.858.9841.
AMPHENOL CORPORATION Amphenol Industrial Phone: 888-364-9011 191 Delaware Avenue Sidney, NY 13838-1395 www.amphenol-industrial.com Amphenol 97 Series Connectors are UL recognized and CSA recognized.
