Transcription
DALI 2 LED Drivers (With System Feedback)Constant Current Version - DALI/1-10V/Switch-DimHED6010 / HED6020 / HED6045HED6045L / HED6060 / HED6060LDALIApplicationsUse with ‘plug n‘ play’ or DALI broadcast master.Fully addressable DALI systems, including fault feedback.Switch-Dim1-10V Dimming SystemsModels for all fixture types- insulated terminal cover with cord restraint:Office / Commercial LightingHealth CareClassroomsUse for retrofit upgrades & new luminaire designs.FeaturesDALIDALI 2, with DALI feedback1-10VSynchronySTD-BY 0.5W 0.93ANALOGUESwitch-Dim with SynchronizationStand-by Power 0.5WActive PFC DesignAnalogue Flicker-free DimmingLogarithmic DimmingLinear DimmingConfigurable Constant Current (CC) Output via Dip-SwitchThermal Cut-out ProtectionShort Circuit ProtectionOver-load Protection}All with Auto-restartPermanent Settings Memory, Protected against Loss of Power5 Year, 50,000hr WarrantyOutput ConfigurationHED6010, 1x10WHED6020, 45, 1x45W1400mA1200mA1050mA900mA700mA500mAHED6060, 1x60WHED6060L, 650mA600mA550mA500mA350mAHED6045L, 1x45W900mA700mA650mA600mA550mA500mA350mAWarning: Please make sure the correct current is selected before starting the driver!391Hytronik LED Driverswww.hytronik.com
Technical DataModel No.HED6010HED6020HED6045Mains Current0.075 0.065A0.125 0.115APower Factor0.90.93HED6060L0.22 0.2A0.22 0.2A0.35 0.27A0.35 0.27A0.950.950.950.9588%Max. EfficiencyInput Output : 3000VACDielectric StrengthLeakage CurrentOutputHED6060220 240VAC 50/60HzMains VoltageInputHED6045L 0.25mA 0.25mA 0.25mA 0.25mA 0.25mA 0.25mARipple Current 3% 3% 3% 3% 3% 3%Uout Max.52V60V75V95V80V115V 0.5s 0.5s 0.5s 0.5s 0.5s 0.5sTurn-on TimeDALI, Switch-Dim, 1-10VDimming InterfaceOperation Temp.Environment Case Temp. (Max.)IP Rating-20 50 -20 45 -20 45 -20 45 -20 45 -20 45 75 75 85 85 80 80 IP20IP20IP20IP20IP20IP20EMC StandardSafetyand EMCSafety StandardDALI StandardEN55015, EN61547, EN61000-3-2, 101 ; IEC62386-102 ; IEC62386-207Semko, CB, RCM, CE , EMCCertificationsModel No.Max. output power/current/voltage rangeHED60108W/ 195mA /6 41V9.5W/ 230mA /6 41V12.5W/ 350mA /6 36V12.5W/ 500mA /6 25VHED602015.5W/ 350mA /10 45V21.5W/ 500mA /10 43V21W/ 700mA /10 30V20.5W/ 900mA /10 23V28W/ 500mA /10 56V40W/ 700mA /10 56V45W/ 900mA /10 50V45W/ 1050mA /10 42V40W/1200mA /10 34V40W/ 1400mA /10 28V26W/350mA /15 75V37W/ 500mA /15 75V41W/ 550mA /15 75V45W/ 600mA /15 75V45W/650mA /15 75V45W/ 700mA /15 65V45W/ 900mA /15 50V55W/1.05A /15 53V60W/ 1.2A /15 50V60W/ 1.4A /15 43V60W/ 1.75A /15 35V60W/ 2.0A /15 30V60W/ 2.1A /15 28V31W/350mA /15 90V45W/ 500mA /15 90V50W/ 550mA /15 90V58W/650mA /15 90V60W/ 700mA /15 86V60W/ 900mA /15 67VHED6045HED6045LHED6060HED6060L60W/ 1.6A /15 38V54W/ 600mA /15 90VDimensions and Terminals52Model: HED6010 1x10W28150www.hytronik.comHytronik LED Drivers392
53.5Model: HED6020 1x20WDIP switch (for LEDcurrent selection)LNSwitch-DimDALILED LED 1-10V 1-10V -30.5150Model: HED6045 1x45W4.13.979.2DALISwitch-DimNL1-10V LED 126129.4140.6additional cap for stand alone installation23LED currentselection185Model: HED6045L 1x45W (low current version for HED6045)4.13.979.2DALISwitch-DimNLLED currentselection126129.4140.6additional cap for stand alone installation231-10V 1-10V LED -185Switch-DimDALI393Hytronik LED Drivers1-10V 1-10V LED LED DIP switch (for LEDcurrent selection)2204042LN58Model: HED6060 1x60Wwww.hytronik.com
58Model: HED6060L 1x60W (low current version for HED6060) LED -LN 1-10V 1-10V DIP switch (for LEDcurrent selection)DALI2204042Switch-DimWire Preparation0.5 - 1.5mmModelHED60100.75 - 1.5mm8mmHED6020TerminalsModelL, 75 - 3.0mmTo make or release the wire from the terminal, use ascrewdriver to push down the button.1-10VHED6060LED outputHED6060L8mmLoading and In-rush D6060LIn-rush Current (Imax.)8A8A62A54A73A69APulse Time66μs66 μs42 μs72 μs8.8 μs9 μsNumber of Drivers Based upon 16A Circuit BreakerCct Breaker pe B989827283232Conversion table for max. quantities of drivers onother types of Miniature Circuit BreakerMCB TypeRatingRelative number of driversB16A100% (see table 5%C16A170%C20A208%C25A260%* Environmental factors (such as temperature) will also influencethe maximum number of the drivers. Please refer to the MCBmanufactures datasheet for loading and derating factors.www.hytronik.comWiring DiagramsDALI ConnectionsDALIDALILN*Push SwitchLNLED LEDDALIDALISwitch-DimLNLED LEDDALIDALISwitch-Dim* Optional Switch-Dim for manual over-ride of DALI1-10V is disabled upon DALI connection* Unused terminals have been omitted for clarity.Hytronik LED Drivers394
Switch-Dim Connections1-10V ConnectionsLED LLNNL’LLEDNLED LLED1-10V 1-10VN*Push SwitchSwitch-Dim1-10VLL’LED LLEDLED LNLEDNSwitch-Dim1-10V 1-10V* Unused terminals have been omitted for clarity.* Unused terminals have been omitted for clarity.Performance 00MA0.82PFEFFICIENCY 60%70%80%90%100%60%LOAD70%80%90%100%LOAD* Typical Efficiency vs Load* Typical Power Factor vs 7472PFEFFICIENCY (%)84240v0.92230v220v0.90.88706850%60%70%80%LOAD* Typical Efficiency vs Load395Hytronik LED Drivers90%100%0.8650%60%70%80%90%100%LOAD* Typical Power Factor vs Loadwww.hytronik.com
FEFFICIENCY %7050%60%70%80%90%100%60%70%LOAD80%90%100%LOAD* Typical Efficiency vs Load* Typical Power Factor vs PFEFFICIENCY 0%80%90%0.8950%100%60%70%LOAD80%90%100%LOAD* Typical Efficiency vs Load* Typical Power Factor vs 5220V0.94800.93787650%0.961.05A84PFEFFICIENCY (%)8860%70%80%LOAD* Typical Efficiency vs LOAD* Typical Power Factor vs LoadHytronik LED Drivers396
920.99900.98880.97860.96350MA600MA84PFEFFICIENCY %80%90%220V0.9250%100%60%70%LOAD80%90%100%LOAD* Typical Efficiency vs Load* Typical Power Factor vs LoadDimming CharacteristicsSwitch-Dim Dimming CurveDALI Dimming CurveLight output [%]Light output .8s19.6s18.4s16s17.2s13.4s11s12.2s9.8sDigital light valueTime (s)06s2508.6s2004.8s1503.6s1002.4s501.2s00s01-10V Dimming CurveLight output 3V4V5V6V7V8V9V10VControl voltage (V)397Hytronik LED Driverswww.hytronik.com
Dimming ProfileLight Output100%Light Output100%Dimming Method(DALI, 1-10V, Push)Dimming Method(DALI, 1-10V, Push)PWM frequency 1KHzPWM frequency 1KHz30%1%Analogue dimmingDimming rangePWM dimmingAnalogue dimmingDimming technique1%-100%Analogue1%PWMPWM dimmingDimming rangeDimming technique30%-100%Analogue1-30%PWMNote: 1. An upgrade with exended flicker-free dimming is indevelopment to provide 3-100% analogue dimming.2. For HED6020 / HED6045 / HED6045L / HED6060 /HED6060L.For HED6010 only.Dimming Interface Operation NotesDALIThis series of products are supplied as DALI default group 0 and are ‘plug n’play DALI’ or ‘independent DALI’ system ready.These models are also fully DALI addressable and may be assigned to groups within the limits specified by the DALI protocol or supporting DALIcontrollers by using a DALI programming tool.Switch-DimThe provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches.Up to 64 LED drivers maybe connected to one switch. The Switch-Dim interface may also be used at the same time as DALI to serve as amanual over-ride.Switch ActionShort press ( 0.4 second)Note: short press has to be longerthan 0.1s, or it will be invalid.Long press ( 0.4 second)SynchronizationSwitch ActionLong press ( 15 seconds)ResponseToggle light on / offToggle dim light / increase brightnessResponseAll lights will dim down to minimum then return to 50% brightness* We recommend the number of drivers connected to a switch does not exceed 25 pieces. The maximum length of the wires from push todriver should be no more than 20 meters.1-10VThe 1-10V input is operable via commercially available simple rotary wall switches designed for 1-10V dimming equipment or from dedicatedsystem central dimming controllers.Note: In the unlikely event that the LED driver be used with the Switch-Dim or DALI interface prior to using the 1-10V interface, the 1-10Vinterface may need to be re-set. This is achieved by placing a short circuit across the 1-10V terminals until the light returns to full brightness(approx. 3-5 seconds).www.hytronik.comHytronik LED Drivers398
All lights will dim down to minimum then return to 50% brightness * We recommend the number of drivers connected to a switch does not exceed 25 pieces. The maximum length of the wires from push to driver should be no more than 20 meters. Dimming range 1-30% Dimming Method (DALI, 1-10V, P
