Transcription
Signage InnovationsSPECIFICATIONGUIDECorporate Office:ASI Signage Innovations8181 Jetstar Drive, Suit 100Irving, Texas 75063(214) 352-9140 voice(214) 352-9741 facsimile(800) ASI-SPEC omSECTION 10440INTERIOR UNFRAMED SIGNS – Applied Tactile Lettering and Raster Braille on PET Acrylic Face (InTac ******************Welcome to ASI Guide Specification System! ASI has prepared this guide specification in printed and electronicmedia, as an aid to specifiers in preparing written construction documents for ADA compliant, unframed signs, forinterior use, fabricated using a photopolymer bonded process. Edit entire master to suit project requirements. Modifyor add items as necessary. Delete items which are not applicable. Words and sentences within brackets [ ]reflect a choice to be made regarding inclusion or exclusion of a particular item or statement. This section mayinclude performance, proprietary and descriptive type specifications. Edit to avoid conflicting requirements. Editornotes to guide the specifier are included between lines of asterisks to assist in choices to be made. They should beremoved before the section is printed for use.This guide specification is based on the Construction Specifications Institute (CSI), Section Format standards.References to section names and numbers are based on MasterFormat 95. For specification assistance with specificproduct applications, please contact the offices above. Detailed technical information, including available sizes, maybe obtained from ASI corporate website at www.asisignage.comASI reserves the right to modify these guide specifications at any time. Updates to this guide specification will beposted as they occur. ASI makes no expressed or implied warranties regarding content, errors, or omissions in theinformation presented. Specifications modified or rewritten in excess of supplier’s standard processes, products, andprocedures may void warranties and related remedies. Contact the offices above regarding modifications andaddition of new **********************11.1PART 1- GENERALSUMMARYA.Drawings and general provisions of the Contract, including General and SupplementaryConditions and Division 1 Specification Sections, apply to this Section.B.Section Includes:1.Unframed signs, tactile lettering and raster Braille on PET acrylic face, for **************************************ASI Sign Systems, Inc.Master Guide SpecificationsInterior Unframed Signs – lettering and raster Braille on PETacrylic face10440 - 111-28-16
ASI has a complete line of signage products for the entire facility, including interior and exterior signs, dimensionalletters, and directories. Many interior signs are updateable by the facility manager. Edit the Related Sectionsparagraph below to suit project requirements; delete sections that will not be **********************C.Section 10410Section 10410Section 10410Section 10410Section 10410Section 10410Section10420Section 10440Section 10440Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10440Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10430Section 10440Section 10440Section 10440Section 10440Section 10440Section 10440Section 10440Section 10420Section 10440Section 10440Section 10440Section 10440Section 10440Related Sections:Non-Illuminated Interior DirectoriesNon-Illuminated Interior DirectoriesNon-Illuminated Interior DirectoriesIlluminated Interior DirectoriesIlluminated Interior DirectoriesIlluminated Interior DirectoriesCast PlaquesInterior Signage - Photochemically-Etched ADA SignsInterior Signage - Photochemically-Etched Plaque SignsDimensional Letters - Fabricated MetalDimensional Letters - Cut MetalDimensional Letters - Cast MetalDimensional Letters - Metal-Laminate AcrylicDimensional Letters - Molded PlasticDimensional Letters - Precision Cut AcrylicDimensional Letters - Cut VinylSpecialty Signs – Simulated stone materialsSpecialty Signs –hardened enamel or porcelain materialsExterior Fiberglass Signs - 4 Sided Non Illuminated MonolithExterior Fiberglass Signs - 4 Sided Non Illuminated PylonExterior Fiberglass Signs - 3 Sided Non Illuminated MonolithExterior Fiberglass Signs - 3 Sided Non Illuminated PylonExterior Fiberglass Signs - 2 Sided Non-Illuminated MonolithExterior Fiberglass Signs - 2 Sided Non Illuminated PylonExterior Fiberglass Signs - 2 Sided Non Illuminated MonolithExterior Fiberglass Signs - 2 Sided Non Illuminated Pylon - Curved FaceExterior Fiberglass Signs - 4 Sided Illuminated MonolithExterior Fiberglass Signs - 4 Sided Illuminated Pylon Exterior Fiberglass Signs - 3 Sided Illuminated Monolith Exterior Fiberglass Signs - 3 Sided Illuminated Pylon Exterior Fiberglass Signs - 2 Sided Illuminated Monolith Exterior Fiberglass Signs - 2 Sided Illuminated Pylon Exterior Fiberglass Signs - 2 Sided Illuminated Pylon - Curved FaceExterior Fiberglass Signs - Non-Illuminated Post and PanelExterior Fiberglass Signs - Illuminated Post and PanelExterior Fiberglass Signs - Illuminated Wall MountedExterior Fiberglass Signs - Non-Illuminated Wall MountedExterior Aluminum Signs - Post and PanelExterior Aluminum Signs - Post and PanelExterior Aluminum Signs - Post and PanelExterior Aluminum Signs - Post and PanelExterior Aluminum Signs - Curved FaceExterior Aluminum Signs - Interchangeable ComponentsExterior Aluminum Signs - Flat FaceInterior Unframed SignsInterior 4 Sided Framed Signs Interior Unframed Signs - Plastic Laminate or Acrylic with Raster BrailleInterior Unframed Sign – Photopolymer Bonded to AcrylicInterior Unframed Signs - Photopolymer Bonded to Plastic Laminate/PETGInterior Door Signage - Thermoformed Resin - InFormInterior Unframed Signs - Embossed (EmBoss)Interior Updateable SignsInterior Updateable Signs Interior Directional Signs Interior Overhead Signs Interior Modular Interchangeable Signs - Interior 20Interior Modular Interchangeable Signs - InfinityASI Sign Systems, Inc.Master Guide SpecificationsSeries 440Series 470Series 490Series 530Series 560Series 570Cast PlaquesSignEtch ISignEtch IILF SeriesLPS SeriesLC SeriesLPL SeriesLM SeriesLPP SeriesLTV SeriesSimulated MaterialsPorcelande Series 940SSeries 840RSeries 930SSeries 830RSeries 920Series 820Series 920CFSeries 820CFSeries 1140SSeries 1040RSeries 1130SSeries 1030RSeries 1120Series 1020Series 1020CFSeries 820Series 1020Series 1014Series 814/8252100 Series2300 Series2400 Series2500 SeriesPacific ExteriorCompassMessenger ExteriorSeries SPSeries 320/390InTacInTouchIntouch 2InFormEmBossWS SeriesInhouse Classic Series 380PMA SeriesPAP SeriesInterior 20InfinityInterior Unframed Signs – lettering and raster Braille on PETacrylic face10440 - 211-28-16
Section 10440Section 10440Section 10440Section 10440Section 10440Section 10440Section 10440Interior Modular Component Signs - Flat FaceInterior Modular Interchangeable Signs - Curved FaceInterior Unframed Signs - ECR Photopolymer-Based ADA SignageInterior Aluminum Extrusion Sign with Changeable InsertInterior Aluminum Extrusion Sign with Changeable InsertInterior Modular Interchangeable Signs JigsawInterior Modular Interchangeable Signs - PuzzleMessenger InteriorPacific ****If specific sign quantities, sizes, layouts, and graphic processes are not scheduled, an allowance may beutilized to set aside a monetary amount sufficient for purchase, delivery, and installation of *************************D.[Allowances: Work of this section is affected by allowances. Refer to Division 1 forallowance amounts and requirements.]1.2QUALITY **************************Include quality assurance requirements below which are consistent with the size and scope of the projectand extent of work of this section. Only request qualification statements you intend to review, and whichare necessary to establish qualifications of the product, manufacturer, or ***************************A. Single Source Responsibility: For each separate type of sign required, obtain signs from one sourcefrom a single manufacturer.B. Design Criteria: The Drawings indicate size, profiles, dimensional requirements and graphics layoutof signs and are based on the specific type and model indicated. Signs by other manufacturers may beconsidered provided that deviations in dimensions and profiles are minor and do not change the designconcept as judged by the designer. The burden of proof of equality is on the **************************Include submittal requirements below which are consistent with the scope of the project and extent ofwork of this section. Only request submittals which are necessary for review of design ************************1.3SUBMITTALSA. General: Submit the following in accordance with Conditions of the Contract and Division 1Specification Sections.B. Product Data: Include Manufacturer’s construction details relative to materials, dimensions ofindividual components, profiles, and finishes for each type of sign required.C. Color Chart: Manufacturer’s standard chart.1.4DELIVERY, STORAGE, AND HANDLINGA. Deliver components correctly packed to prevent damage.B. Store in secure areas, out of weather and protected from work of other trades.C. Handle IAW Manufacturer’s instructions.1.5WARRANTYA. Provide Manufacturer’s standard one year limited warranty covering manufacturing defects.ASI Sign Systems, Inc.Master Guide SpecificationsInterior Unframed Signs – lettering and raster Braille on PETacrylic face10440 - 311-28-16
Manufacturer's Warranty: Submit manufacturer's standard warranty document executed by authorizedcompany official.1.Warranty Period: one (1) year from product ship *******************************In 2.1A1 below, modify to reflect name, address, and phone/fax of local ASI Affiliate who is supplying toproduct or system to the *************************2.1SIGNAGE SYSTEMSA.Acceptable Manufacturers:1.ASI Signage Innovations, 8181 Jetstar Drive, Suite 100, Irving, Texas 75063;(214) 352- 9140 telephone; (214) 352-9741 facsimile; (800) ASI-SPEC [2747732]2.Substitutions: Submit in accordance with Section 01600.B.Acceptable Product: InTac ADA-Ready Sign System with requirements indicated formaterials, thickness, finish colors, designs, shapes, sizes and *************************InTac Series Signs offer a variety of standard and custom sizes, shapes, and appearance options; allfabricated using a photopolymer bonded to an acrylic backing plaque to create projected graphics.Revise below to suit project requirements. Note that Braille must be used to identify all permanent roomsand ************************2.2SIGN MATERIALSA. Sign Face: Subsurface Painted acrylic, .125 inch thick, matte first surface.B. Applied Lettering and/or Numerals: LPP Series Individual, Acrylic, Dimensional Characters. Individualcut acrylic letters (1/32" thick) with matte finish.C. Grade 2 Braille: Clear raster ballsD. Fastener: VHB Tape - .030 inch thick double-face tape.2.3PLAQUE OPTIONSA. Manufacturer’s standard ASI Intac Tactile Plaque construction. To meet requirements indicated formaterials, thickness, finish colors designs, shapes, sizes and details of construction. Installeddimensional tolerances to be plus/minus 1/16 inch.B. Surface Graphics: Sign graphics to be applied to sign face by Manufacturer’s standard processesincluding Rowmark pressure sensitive adhesive. Face of sign graphics to be raised 1/32 inch min.from plaque first surface. Precisely formed, uniformly opaque graphics to comply with relevant ADAregulations and the requirements indicated for size, style, spacing, content, position and colors.C. Braille Tags: Clear raster balls to be drilled and tapped using ASI's standard Intac procedure and IntacBraille guide.2.4 FINISHESASI Sign Systems, Inc.Master Guide SpecificationsInterior Unframed Signs – lettering and raster Braille on PETacrylic face10440 - 411-28-16
A. Colors: As selected from the Manufacturer’s standards.B. Surface Texture: matte, per ASI Intac ***************************In 2.5 below, select from one or more of the mounting options ON METHOD[System VT, vinyl tape.][System SA, silicone adhesive.][System MH, mounting holes for mechanical fasteners.][System CSMH, counter sunk mechanical fasteners.][System PM, partition mount, compatible with systems furniture panels.]3EXECUTION3.01 INSTALLATIONA. General: Locate letters and graphic elements where indicated, using installationmethods IAW the manufacturer’s instructions.B. Cleaning and Protection: Upon completion of the installation clean letter surfacesIAW the manu-facturer’s instructions. Protect units from damage until acceptance bythe Owner.3.1SIGN SCHEDULEA.Schedule: Refer to signage schedule and Drawings for sizes, locations, and layout ofsignage types, sign text copy, and graphics.END OF SECTIONASI Sign Systems, Inc.Master Guide SpecificationsInterior Unframed Signs – lettering and raster Braille on PETacrylic face10440 - 511-28-16
This guide specification is based on the Construction Specifications Institute (CSI), Section Format standards. References to section names and numbers are based on MasterFormat 95. For specification assistance wit
