Transcription
ARMATURENtotraumfrei & wartungslosStandard construction dimensionsaccording to PN 10 - 100 / class 150 - 900
Notes only applies to standard flange types (not RTJ, LG etc.) for housings in GGG 40.3, the flange thickness 2mm applies as of DN 40 Dimensions are in accordance with EN 1092-1-2007; EN 558-1-2008 and ASME B16.102000; ASME B16.5-2004 for geometric reasons, threads are used in the flange bores in a few cases* Flange thickness according to ASME B16.5-2003 Tab.9 (only CLASS150 and ½“ – 3“)** Flange thickness not including height of sealing stripZ Number of boresØCØDØGØKfLB
NPS/ DN1/2“PNclassL[mm]1“25321 1/2“40øC[mm]øG[mm]f[mm]1089011,6 / 6541445263130 /210130 15030015211513,2 ,750,8230016512514,7 4682631402410041868214024100418682150160 /230160 /23014011588,9415,763,5230017813516,3 ,5790027916028,6**111,1425,463,571001 9 3632001702612542288310020017026125422883
NPS/ DN2“502 55280250270280320355380285300345355B[mm]19,5 / 16,3*22,725,4**38,1**20262822,7 / 17,9*25,928,6**41,3**1822263024,3 73333
50450356502838965500500500500500550 249050553524444224444
NPS/ 4Visit our website www.az-armaturen.deYou will find all the details on the new AZ website for PCs, MACs and smartphones Complete product selectionClassification of accessoriesQuery toolData sheet downloadNewsletter registration
Important MaterialsDuctile cast ironENJS 1049EN-GJS-400-18-LTGr 60-40-18/ A395GP240GHWCB/A216Heat-resistant steel casting1.0619Unalloyed stainless steel casting (low Temp.)1.1138G21Mn5LCC(LCB)/A3521.4308GX5CrNi 19-10CF8/A3511.4309GX2CrNi 19-11CF3/A3511.4408GX5CrNiMo 19-11-2CF8M/A3511.4409GX2CrNiMo 4500 -20-5(Uranus B6)1.4552GX5CrNiNb18-9CF8C/A351Austenitic steel castingAustenitic-ferritic stainless steel iCrMoCuN26-6-3-3CD4MCUN/A995/A890Nickel alloy with molybdenum and /HB2N3M/A4942.4685GNiMo28/HBN7M/A4942.4816NiCr15Fe / Inconel 0Nb/Monel 400M35.1/2 iumGrade 2/B37ZirconiumZR702/ZR705/B752Nickel alloy with copper2.4365Special materials
Print 6/2013 - Subject to technical change without noticeARMATURENtotraumfrei & wartungslosAZ-Armaturen GmbHWaldstraße 7D-78087 MönchweilerTelefon: 49 (0) 7721 7504-0Telefax: 49 (0) 7721 7504-13info@az-armaturen.dewww.az-armaturen.de
Dimensions are in accordance with EN 1092-1-2007; EN 558-1-2008 and ASME B16.10-2000; ASME B16.5-2004 for geometric reasons, threads are used in the flange bores in a few cases * Flange thickness according to ASME B16.5-2003 Tab.9 (only CLASS150 and ½“ – 3“) ** Flange thickness not including height of sealing strip Z Number of bores. NPS/ DN PN class L [mm] øD [mm] B [mm] øK .
