Transcription
DESIGNING, ENGINEERING, & otynmtrmercial - Industrial - PropeideseR
Ordering To locate a distributor branch near you contact PSG’s Customer Service via phone at215-257-3621 or 800-782-8412 or check our website at www.psgcontrols.com and click onthe “Distributor Locator” link.PSG corporate fax number: 215-257-4288, PSG corporate e-mail: sales@psgcontrols.com.Price and availability inquiries should be directed to PSG’s Customer Service via phone at215-257-3621 or 800-782-8412, and a current price list can be requested.Samples Product samples are available for a charge. Please contact your sales representative.WarrantyPSG Controls, Inc. warrants all cataloged products to be free from defects in material and workmanship, for a period of one (1) year from the date of purchase, unless otherwise specified inwriting. Any PSG product proven to be defective within the warranty period will be repaired orreplaced, at PSG Controls’ option, and shipped prepaid. This warranty does not cover productsthat have been subject to misuse, abuse, neglect, accidents, alterations, improper installation orapplication, or used outside the scope of the printed instructions. Additionally, this warranty doesnot apply to batteries or the deterioration thereof, or damage to the product caused by the useof faulty batteries. In no event will PSG Controls, Inc. be liable for the cost of labor charges, lostprofits, injury to good will or any other consequential damages for defective goods, late delivery ornon-delivery.PSG Controls, Inc. reserves the right to make the final determination as to whether any productreturned for warranty consideration is defective.No product shall be accepted for repair or replacement without prior written authorization fromPSG Controls, Inc. and a copy of the original invoice. A Return Material Authorization number(RMA) is required for any warranty return and may be obtained through PSG’s Customer ServiceDepartment via phone (215-257-3621) or email (sales@psgcontrols.com).21PSG
Table of ContentsFreedom Series.1-2Digital All-in-one Programmable and Non-Programmable ThermostatsMedallion Series.3Digital Single Stage, Multi Stage, and Heat Pump Residential ThermostatsRadiant Series.4Digital Line Voltage Residential ThermostatsNepra Series.5-8Digital Fan Coil, PTAC, PTHP, and Wireless ThermostatsDigital Thermostat Accessories.9E-ACCUSTAT II Series.10Single Stage and Multi Stage Low Voltage Controls with Electronic Sensing andOptional Setback CapabilityACCUSTAT Series.11-14Single Stage and Multi Stage Low Voltage, Line Voltage, and Limiting Controlsusing ACCUTHERM Snap-in SensorsACCUSTAT & E-ACCUSTAT II Accessories.15-16Preset and Adjustable Snap-in Sensors and Accessories for ACCUSTAT Controls and Sensors,Timers, Accessories for E-ACCUSTAT II ControlsThermometers.17Pocket Dial and Digital ThermometersRelay Control Boards.18General Purpose Relay Control BoardsThermostat Reference Guide.19-20Warranty.21Note:All product photos included are representative of a product line and may notcontain exact printing, switches, etc.
!NEWFreedom Advantage SeriesDigital All-in-One Programmable ThermostatsThe Freedom Advantage digital thermostat offers flexibleprogramming (7-day, 5-2, or 5-1-1) for most lowvoltage applications all in one control. It canbe configured to operate single or two-stageconventional heating and/or cooling orsingle or multi-stage heat pump systemswith electric or dual fuel auxiliary heat. Inaddition, it can be configured for eitherauto-changeover or manual heat/cooloperation and has independent heatingand cooling cycle rates, ServiceWatch reminders, and a large backlit display.The built-in Advanced PerformanceTechnology allows the system to graduallychange the temperature from the energysaving setback temperature to the comforttemperature, saving the user on energy costs.Plus, a variety of lockout levels protect thethermostat from tampering.The features packed into this control make it ideal for property management applications suchas schools, condominiums, and apartments, as well as light commercial and standard residentialapplications.Please request specifications for detailed technical information.Basic Specifications:Input voltage:Power:Output drive:Comfort temperature range:Programming modes:Display:Dimensions:24 VAC 10%50/60 Hz(not for use with millivolt systems)Battery (plus optional common wire connection)1.0 amps max per circuit40 F to 90 F7-day, 5-2, or 5-1-1LCD; 0.6” charactersEL blue/green backlight6”W x 4”H x 1.5”DModel #Case ColorFP700WhiteBlackFP700-B*Consult factory for information regarding customlabeling your Freedom thermostat.1PSG
Freedom Non-ProgrammableDigital Non-Programmable Thermostatswith One-Touch EconomyCOMSOO INGN!The Freedom non-programmable has an economymode that can be turned on or off at the touchof a button. It can be configured to operatesingle stage heating, cooling, or heat pumpsystems with or without auxiliary heat.In addition, like its sister thermostatthe Freedom Advantage, it can beconfigured for either auto-changeoveror manual heat/cool operation and hasindependent heating and cooling cyclerates, ServiceWatch reminders, and alarge backlit display. Plus, a variety oflockout levels protect the thermostat fromtampering.The economy and lockout features of thisnon-programmable control make it ideal forproperty management applications such asschools, condominiums, and apartments, as wellas light commercial and standard residential applications.Please request specifications for detailed technical information.Basic Specifications:Input voltage:Power:Output drive:Comfort temperature range:Display:Dimensions:24 VAC 10%50/60 Hz(not for use with millivolt systems)Battery (plus optional common wire connection)1.0 amps max per circuit40 F to 90 FLCD; 0.6” charactersEL blue/green backlight6”W x 4”H x 1.5”DModel #Case ColorF100WhiteBlackF100-B*Consult factory for information regarding customlabeling your Freedom thermostat.PSG2
Medallion Digital ThermostatsThe Medallion controls are simple to use and aesthetically pleasing.They are available in both programmable and non-programmablemodels.The programmable models offer the easiest-to-use programming onthe market, which will make callbacks a thing of the past! They allowprogramming for up to four events (Wake, Leave, Return, and Sleep),with the ability to disable the middle two events for the weekend. A nonvolatile memory chip protects the programming in the event of a powerloss.Both programmable and non-programmable models feature a large easyto-read display and simple up/down arrows to set the temperature. Theyare available in battery and hardwired models, making them applicablefor both retrofits and new construction.These controls are ideal for primary residential, multi-family, and light commercial applications, including gas, oil, central electric, and heat pump.Please request specifications for detailed technical information.Specifications:Power:Battery or hardwired 24 VAC (depending on model)Load Rating:24 VAC at 1 ampRange:40 F to 90 FModel No.StagesPowerSystemSwitchesFanOther FeaturesSwitchesSingle Stage Non-Programmable (dimensions 2.9Wx2.9Hx1.2D)TDM24-H1Heat Only BatteryHt/OffNoneTDM24-AH111 Cl/1 HtBatteryCl/Off/HtAuto/OnSingle Stage ProgrammableTDMP24-H1Heat Only BatteryHt/OffNoneTDMP24-AH111 Cl/1 HtBatteryCl/Off/HtAuto/OnTDMP24-AH11-CB 1 Cl/1 Ht HardwiredCl/Off/HtAuto/OnTDMP24-AH11-M3F 1 Cl/1 Ht HardwiredCl/Off/HtAuto/OnMulti Stage Programmable (dimensions 5.0Wx5.0Hx1.2D)TDAP24-AH22-CB 2 Cl/2 Ht Hardwired Auto/Cl/Off/HtAuto/OnTDAPHP-AH12-B 1 Cl/2 Ht Hardwired Auto/Cl/Off/Ht/EH Auto/On3PSGProgrammablemodels onlyBacklitBacklit; 3-Speed FanControlBacklitHeat Pump; Backlit
Radiant Series Line Voltage ThermostatsDigital Programmable & Non-Programmable ThermostatsThe Radiant series thermostats are simple to use and feature alarge easy-to-read display. They are available in either heat onlyor cool only programmable or non-programmable models.Programmable digital controls have been proven to save up to35% in energy costs when replacing an existing bi-metal control.The 5-1-1 programming of the Radiant programmable controlsallows the user to set up to four events per day (Wake, Leave,Return, and Sleep) with separate programming for weekends. Anon-volatile memory protects the programming in the event of apower loss.Both programmable and non-programmable models also offeradjustable temperature limiting, which allows the installer toprogram setpoint limits and makes them ideal for property management applications such as apartments, condos, and studenthousing.They are available in 120 VAC or 240 VAC single pole or 240 VACdouble pole models. These controls work with baseboard electric heat,radiant heat zone valves, infrared heaters, exhaust fans, and line voltage air conditioning.Please request specifications for detailed technical information.Basic Specifications:Voltage:120 or 240 VACLoad Rating:16 amps (resistive) or 1/2 hpRange:40 F to 85 FDimensions:3.5”W x 5.0”H x 1.5”DUL ApprovedModel #VoltageProgrammableRPLV-120S120 VACRPLV-240S240 VACRPLV-240D240 VACRPLV-120S-C120 VACRPLV-240S-C240 VACRPLV-240D-C240 VACNon-ProgrammableRLV-120S120 VACRLV-240S240 VACRLV-240D240 VACRLV-120S-C120 VACRLV-240S-C240 VACRLV-240D-C240 VACCommentsSingle pole; Heat onlySingle pole; Heat onlyDouble pole; Heat onlySingle pole; Cool onlySingle pole; Cool onlyDouble pole; Cool onlySingle pole; Heat onlySingle pole; Heat onlyDouble pole; Heat onlySingle pole; Cool onlySingle pole; Cool onlyDouble pole; Cool onlyPSG4
Nepra 4000 SeriesFor Fan Coil Applications2 pipe and/or 4 pipe systemsThe Nepra 4000 digital fan coil series provides energy savingsin a high quality, affordable control. These controls are provento save on energy costs when replacing an existing mechanicalfan coil control. Plus, they feature several field programmableoptions that make them extremely flexible. The installer cancustomize the default setpoint, comfort limits, economy settings,cycle rate, and more.Large buttons and an easy-to-read display make these controlssimple to use in any setting.They can be used with 2-pipe or 4-pipe fan coil systems, and theyare available in either user-selectable or constant fan models.Custom features such as remote sensing, molex connectors,setback capability, and custom programming can be requestedon larger quantity orders.These controls are ideal for institutional and property management applications such as schools, hospitals, condominiums,and apartments, as well as the hospitality industry.Please request specifications for detailed technical information.Basic Specifications:Input Voltage:24, 120, 240, or 277 VACLoad Rating:24 VAC: 1.5 amps/circuitLine Voltage: 2.0 amps (pilot duty)per stage; 1/6 HP fan loadRange:60 F to 85 FDimensions:3.5”W x 5.0”H x 1.5”DETL ListedModel #VoltageFan 4120KNP-4240KNP-4277K24 VAC120 VAC240 VAC277 VAC24 VAC120 VAC240 VAC277 VACUser selectableUser selectableUser selectableUser al coating is available for high humidity and corrosive environments. Add a “K”after the “NP” in the part number (Example NPK-4024U).Consult factory for custom configurations or programming options (available onorders of 100 pieces or more).5PSG
Nepra 4500 SeriesFor PTAC, PTHP, and Water SourceHeat Pump ApplicationsThe Nepra 4500 series provides energy savings in a high quality, affordable digital control. These controls are proven to saveon energy costs when replacing an existing mechanical control,and the relay-free design provides silent operation of PTAC,PTHP, and water source heat pump systems.These controls also feature several field programmable optionsthat make them extremely flexible. The installer can customizethe default setpoint, comfort limits, economy settings, cyclerate, and more.Large buttons and an easy-to-read display make these controlssimple to use in any setting.They are available in either user-selectable or constant fanmodels, and they can be used with both PTAC and PTHPsystems, including manufacturers such as Trane, Amana,Friedrich, and others.Custom features such as remote sensing, molex connectors,and setback capability can be requested on larger quantityorders.These controls are ideal for institutional and property management applications such asschools, hospitals, condominiums, and apartments, as well as the hospitality industry.Please request specifications for detailed technical information.Basic Specifications:Input Voltage:24 VACLoad Rating:1 amp/circuitRange:60 F to 85 FDimensions:3.5”W x 5.0”H x 1.5”DModel #Fan ControlNP-4500U2NP-4500K2User selectableConstant*Conformal coating is available for high humidity andcorrosive environments. Add a “K” after the “NP” in thepart number (Example NPK-4500U2).Consult factory for custom configurations or programmingoptions (available on orders of 100 pieces or more).PSG6
Nepra Premier SeriesFor Fan Coil Applications2 pipe and/or 4 pipe systemsThe Nepra Premier series digital controls offer flexible field configuredoptions for use with 2-pipe or 4-pipe fan coil systems. Field configurable options include: default setpoint; 1-2-3 speed fan control; userselectable, constant, and auto cycle fan; economy limits; heat/coollimits; etc.Line voltage models can operate from 120 VAC up to 277 VAC. Thereare also 24 VAC models available.All of the Premier controls are backlit for ease of use, and selectedmodels have advanced features such as remote sensing and setbackcapability.These controls sport a brand new look, and they are ideal for institutionaland property management applications such as schools, hospitals,condominiums, and apartments, as well as the hospitality industry.Please request specifications for detailed technical information.Basic Specifications:Input voltage:Comfort temperature range:Economy Limits:Backlight:Dimensions:NRTL ListedModel FC-ALV-RSPFC-MLV-RS24 VAC or 120-277 VAC(see models)60 F to 85 FCool 78 F - 88 F;Heat 55 F - 68 FEL blue green3.9”W x 5.7”H x 1.6”DVoltage24 VAC24 VAC120-277 VAC120-277 VAC24 VAC24 VAC120-277 VAC120-277 VACLoad Rating ChartSystem Changeover Additional ualAutomaticManualRemote Sensing; Setback CapabilityRemote Sensing; Setback CapabilityRemote Sensing; Setback CapabilityRemote Sensing; Setback CapabilityComments: Conformal coating is available for high humidity and corrosive environments. Add “-K” to the part number. For tan color add “-T” to the part number (available only on orders of 100 pieces or more). Setback compatible models must be used with an external timer or other device that can provide dry contacts toutilize setback feature. Remote sensing models require additional sensors which need to be ordered separately. See Accessories.7PSG
Nepra Wireless SeriesNepra wireless digital controls provide a wall mounted option formost HVAC systems, such as PTAC, PTHP, and water sourceheat pump, without the hassle of running wires. Simply mount thebattery-operated control on the wall and wire the receiver directlyinto the system equipment. The receiver takes a 24 VAC input, soit can be used with either 24 VAC systems or wired with a relayboard allowing a step-down from a line voltage system.The controls can be programmed for either user-selectable orconstant fan operation, as well as either auto or manual heat/coolchangeover.These controls feature many field programmable options thatmake them extremely flexible. The installer can customize settingsincluding (but not limited to): auto or manual changeover one- or two- speed fan user-selectable, constant, or auto fan control PTAC & PTHP manufacturer settings default setpoint comfort limits economy settings cycle rateThermostatReceiverLarge buttons and an easy-to-read backlit display make these controls simpleto use in any setting.They are ideal for institutional and property management applications such asschools, hospitals, condominiums, and apartments, as well as the hospitalityindustry.Custom configurations such as heat only and cool only can be requested on larger quantity orders.Please request specifications for detailed technical information.Thermostat Basic Specifications:Input Voltage:2 C-cell batteries (3V total)Load Rating:1/2 amp/circuitRange:60 F to 85 FDimensions:3.5”W x 5.0”H x 1.5”DModel #Receiver Basic Specifications:Input Voltage:24 VACLoad Rating:0.3 amp/circuitDimensions:2.5”W x 4.4”H x 1.1”DFan Control DefaultRF-UUser selectableRF-KConstant*Conformal coating is available for high humidity and corrosive environments.Consult factory for ordering information.PSG8
Digital Thermostat AccessoriesFreedom Series AccessoriesModel #DescriptionFP-OSOutdoor/duct mount sensorFP-WSWall mount sensorFP-WSMedallion Series AccessoriesModel #DescriptionBP-TDM1Mounting backplate for small modelsBP-TDM1-IMPMounting backplate for small models with custom imprintingBP-TDM2Mounting plate for large modelsM-DPDoor - large models (not Heat Pump) - custom imprinting availableM-DHPDoor - large Heat Pump models - custom imprinting availableBP-TDM2BP-TDM1M-DPNepra Series AccessoriesModel #DescriptionCommentsSB-1*Subbase for Nepra 4000 & 4500No instructions; plasticSB-1/TAN*Subbase for tan Nepra 4000 & 4500No instructions; tan color; plasticSB-1D*Subbase for Nepra 4000 & 4500“K” instructions; plasticSB-1E*Subbase for Nepra 4000 & 4500“U” instructions; plasticP-SBSubbase for PremierNo instructions; plasticP-AKAquastat kit for Premier“-RS” models onlyP-RSRemote sensor for Premier“-RS” models only* All subbases are left/right reversible.SB-19PSG
E-ACCUSTAT II Series Electronic ThermostatsAll of the E-ACCUSTAT II controls feature electronic sensing andare housed in tamper-resistant locking cases.These hardwired controls are available in single stage, multistage, and heat pump models, with several optional featuressuch as remote sensing, setback, and damper control.These controls are ideal for commercial applicationssuch as warehouses and fast food restaurants orresidential applications such as condominiums andother managed properties.Please request specifications for detailed technicalinformation.Basic Specifications:Voltage:24 VAC 10% (common wire required)Load Rating:1.5 amps/circuitRange:55 F to 85 FDimensions:4.6”W x 4.6”H x 1.8”DModel MS2-AH22-RLEMS2-AH22AS-RDStagesExtra Features1 CL/1 HT1 CL/1 HT1 CL/1 HT2 CL/2 HT2 CL/2 HT2 CL/2 HTRemote sensingRemote sensing, setback, damperRemote sensingRemote sensing, setback, damperHeat S-RD1 CL/2 HT1 CL/2 HT2 CL/3 HT2 CL/3 HTRemote sensing, setback, damperRemote sensing, setback, damperPSG10
ACCUSTAT Low Voltage ControlsAll of the ACCUSTAT controls provide precise temperature control usingPSG’s ACCUTHERM snap-in sensors (sold separately).They are housed in tamper-resistant locking cases, and the lowvoltage series is available in single stage, multi stage, and heatpump models. Some models are setback compatible.These controls are ideal for commercial applications suchas warehouses and fast food restaurants or residentialapplications such as condominiums and other managedproperties.Please request specifications for detailed technical information.Specifications:Voltage:Load Rating:Sensing:Dimensions:18-26 VAC1.2 Amps per stagePreset or adjustable ACCUTHERM sensors(sold separately)4.6”W x 4.6”H x 1.5”DStagesSensorsRequiredSingle StageLA-1LH-1LH-2LAH-11LAH-11ELMS-AH11LAH-221 CL1 HT1 HT (hi/lo)1 CL/1 HT1 CL/1 El. HT1 CL/1 HT1 CL/1 HT (hi/lo)1122224Multi 2IF2 CL2 HT2 CL/1 HT2 CL/2 HT2 CL/2 HT2 CL/2 HT223444Model #Heat Pump1 CL/2 HTLHP-AH22Setback Compatible*LH2-AS1 HT (hi/lo)LAH-22AS1 CL/1 HT (hi/lo)LMS-AH23AS2 CL/2 HT (hi/lo in heat)4245ACCUTHERM sensors and other accessories orderedseparately - see page 15.11PSG*Setback compatibleACCUSTAT modelsmust be used with anexternal timer to utilizesetback feature.
ACCUSTAT Line Voltage ControlsAll of the ACCUSTAT controls provide precise temperaturecontrol using PSG’s ACCUTHERM snap-in sensors (soldseparately).They are housed in tamper-resistant locking cases, and theline voltage series is available in single stage heat only andheat/cool models.These controls are ideal for commercial applicationssuch as warehouses and fast food restaurants orresidential applications such as condominiumsand other managed properties.Please request specifications for detailedtechnical information.Basic Specifications:Voltage:120 or 220 VACSensing:Preset or adjustable ACCUTHERM sensors(sold separately)Rating:1, 5, or 20 Amps, depending on modelDimensions: 4.6”W x 4.6”H x 1.5”DModel d1 HT1 HT1 HT1 HT1 CL/1 HT1 CL/1 HT1 CL/1 HT (hi/lo)1111224120 VAC / 1 Amp120 VAC / 20 Amp120 VAC / 5 Amp220 VAC / 20 Amp120 VAC / 1 Amp120 VAC / 5 Amp120 VAC / 5 AmpACCUTHERM sensors and other accessories ordered separately - see page 15.PSG12
ACCUSTAT Duct or Wall Mounted LimitersACCUSTAT limiters are used in conjunction withan existing thermostat to control the range oftemperature adjustment permitted, using PSG’spreset ACCUTHERM snap-in sensors (soldseparately).Duct mount and wall mount models are availablein heat only, cool only, and heat/cool. Wall mountmodels are housed in tamper-resistant lockingcases.These controls are ideal for offices, rental properties,and a variety of property management applications suchas assisted living, apartments, condominiums, etc.Please request specifications for detailed technical information.Specifications:Voltage:24-30 VACSensing:Preset or adjustable ACCUTHERM sensors(sold separately)Rating:1.0 AmpsDimensions: 4.6”W x 4.6”H x 1.5”D (wall mount)3.0”W x 4.5”H x 1.5”D (duct mount)StagesDuct MountLIM-A1LIM-H1LIM-AH11SensorsRequired1 CL1 HT1 CL/1 HT112Wall MountWLIM-A1WLIM-H1WLIM-AH111 CL1 HT1 CL/1 HT112Model #ACCUTHERM sensors and other accessories orderedseparately - see page 15.13PSG
ACCUSTAT Energy GuardSingle Stage Adjustable Setting with LimitsThe ACCUSTAT Energy Guard controls provide superbaccuracy in a simple mechanical control, utilizing a builtin adjustable ACCUTHERM sensor.These controls offer limiting capabilities by adding PSG’spreset ACCUTHERM sensors (sold separately).Heat only and heat/cool models are available that aredesigned to work with 24 VAC radiant heat valves or gas/oil/electric low voltage heating and cooling systems.They are ideal for many property management applicationssuch as HUD, assisted living, apartments, condominiums,university housing, etc.Please request specifications for detailed technicalinformation.Specifications:Voltage:24 VACSensing:Built-in adjustable ACCUTHERM sensorLimiting:Preset ACCUTHERM sensors(sold separately)Rating:1.0 AmpRange:40 F to 90 FDimensions: 3.5”W x 3.9”H x 1.6”Model #StagesSensors RequiredSwitchesConnectionsT30H-LT32AH-L1 HT1 CL/1 HT12None(system) Ht/Off/Cool(fan) Auto/OnR,WR,W,Y,G(for limiting)ACCUTHERM sensors ordered separately - see page 15.PSG14
ACCUTHERM Preset and Adjustable Snap-in Sensors(for use in all PSG ACCUSTAT controls)PSG’s patented ACCUTHERM sensors work in all of the ACCUSTAT controls, including low voltage, line voltage, heat pump, Energy Guard, and limiters.These mercury-based sensors provide high accuracy with virtually no temperature drift.Both preset and adjustable models are available. The preset models offer tamper-proof temperaturecontrol, and the adjustable model offers the flexibility of choosing any temperature between 40 and90 F.Please request specifications for detailed technical information.PresetTemperatureSettingModel #S-4040 FS-7575 FS-4545 FS-7676 FS-5050 FS-7878 FS-5555 FS-8080 FS-6060 FS-8282 FS-6262 FS-8484 FS-6464 FS-8686 FS-6565 F88 FS-6666 FS-88AdjustableS-6868 FAS-9040-90 F (adj.)S-7070 FS-7272 FModel #Preset15AdjustableTemperatureSetting74 FS-74PSG
ACCUSTAT / E-ACCUSTAT AccessoriesModel #DescriptionCP-012ACCUSTAT replacement coverCP-012EE-ACCUSTAT II replacement coverCP-013ACCUSTAT /E-ACCUSTAT II locking pinCP-014ACCUSTAT /E-ACCUSTAT II keyBAT-393KwikTherm PAD replacement battery with battery coverT24-7Timer 7 Day - 24 VACSRT-3E-ACCUSTAT II Remote Sensor - wall 16
Pocket ThermometersPSG offers both dial and digital thermometers.The dial thermometers are available in two 1” Econo-Therm models and a 1-3/4” pocket bimetalmodel. The Econo-Therm series has two models, with a range of -40 / 160 F or 0/ 220 F. Thepocket bimetal has a range of 0/ 220 F.The digital model is PSG’s Kwiktherm , featuring a swivel head, a range of -50/ 300 F, and a 15second automatic update with an instant update button.Both the dial and digital models are ideal for industrial applications.Please request specifications for detailed technical information.Dial ThermometersBasic Specifications:Dial Size:1” or 1-3/4”Stem:5”Model #KwikTherm Digital ThermometerBasic Specifications:Stem:5” stainless steelDisplay:LCD in 0.1 F incrementsBattery:#393TemperatureRange1” Econo-ThermIndividually blister-packedET-160-40/ 160 FET-2200/ 220 FConsult factory for bulk packing options1-3/4” Pocket BimetalD-5009KwikTherm DigitalPAD-300170/ 220 F(-10/ 100 C)-50/ 300 FPSG
Relay ControlBoardsRelay Control BoardsPSG’s general purpose relay boards are available for both 2 and 3 speed fan applications in 120,208/240, and 277 VAC.They include two independent 20 amp relays and a Class II transformer for low voltage controls.Please contact factory for additional information.Model #DescriptionLoadRatingGeneral purpose relay for 2 or 3 speed fanRC-120-42 speed fan1/3 HPRC-220-42 speed fan1/2 HPRC-277-42 speed fan1/2 HPRC-120-53 speed fan1/3 HPRC-220-53 speed fan1/2 HPRC-277-53 speed fan1/2 s twoindependent 20 amprelays and a Class IItransformer for lowvoltage controlsNotes: All 120-240 VAC models are UL listed. For Conformal Coating add a “K” after the “RC” in model number (Example: RCK-120-4). Contact factory with inquiries regarding relay control boards requiring custom configurations.PSG18
DIGITAL THERMOSTAT REFERENCE GUIDEProgrammableMultiStageSingleStageHeat Pump(air to air)StagesHeatingStagesCoolingPowerRemoteSensing BacklightCapabilityAutoChangeoverFreedom - see catalog pages 1-2 for details.FP700xxxxup to 2up to 2FP700-Bxxxxup to 2up to 2F100xx11F100-Bxx11Batteryw/ onalxOptionalxOptionalMedallion - see catalog pages 3 for AH12-Bxx (H)x (C)x22Hardwiredxx21HardwiredxxRadiant - see catalog pages 4 for details.RPLV-120Sxx120 VACRPLV-240Sxx208/240 VACRPLV-240DxxRPLV-120S-Cxx120 VACRPLV-240S-Cxx208/240 VACRPLV-240D-CRPLV 240D Cxx208/240 VAC208/240 VACRLV-120Sx120 VACRLV-240Sx208/240 VACRLV-240Dx208/240 VACRLV-120S-Cx120 VACRLV-240S-Cx208/240 VACRLV-240D-Cx208/240 VACNEPRA FAN COIL / PTAC THERMOSTAT REFERENCE GUIDEThe following Nepra series are available with the features marked. See pages 5-8 for details.1924 VAC120/240/277 teSensingUser-SelectFanConstantFanAuto FanFan Coilor PTAC/PTHPFCNepra Premierxxx1, 2, 3xxxxxNepra 4000xxx2CustomCustomxxxFCNepra 4500xx2CustomCustomxxxPTAC/PTHPNepra Wirelessxx1, 2CustomCustomxxxPTAC/PTHPPSG
NON-DIGITAL THERMOSTAT REFERENCE GUIDEProgrammableMultiStageSingleStageHeatPump(air to air)StagesHeatingStagesCoolingUsesAccutherm ngeoverACCNjSTAT - see catalog pages 11-14 for AH11x11xLAH-22x11x2xLMS-A2xLMS-H2xLMS-AH21x (C)xx2X xLHP-AH22x (H)x M-AH11x1T30H-Lx1T32AH-Lxxx1x11xx11xxE-ACCNjSTAT - see catalog pages 10 for x11xx22xxxxx21xxx21xxx32xxx32PSGxxxxxxx20
To locate a distributor branch near you contact PSG's Customer Service via phone at 215-257-3621 or 800-782-8412 or check our website at www.psgcontrols.com and click on the "Distributor Locator" link. PSG corporate fax number: 215-257-4288, PSG corporate e-mail: sales@psgcontrols.com.
