Transcription
HARDWARE INSTALLATION GUIDEBrocade FCX SeriesHardware Installation GuidePart Number: 53-1003616-03Publication Date: 15 June 2017
2017, Brocade Communications Systems, Inc. All Rights Reserved.Brocade, the B-wing symbol, and MyBrocade are registered trademarks of Brocade Communications Systems, Inc., in the United States and in othercountries. Other brands, product names, or service names mentioned of Brocade Communications Systems, Inc. are listed at l-property/brocade-legal-trademarks.html. Other marks may belong to third parties.Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment,equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, withoutnotice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocadesales office for information on feature and product availability. Export of technical data contained in this document may require an export license from theUnited States government.The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of thisdocument or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.The product described by this document may contain open source software covered by the GNU General Public License or other open source licenseagreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, andobtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.2Brocade FCX Series Hardware Installation GuidePart Number: 53-1003616-03
ContentsPreface.7Document conventions.7Notes, cautions, and warnings.7Text formatting conventions. 7Command syntax conventions.8Brocade resources.8Document feedback.8Contacting Brocade Technical Support. 9Brocade customers.9Brocade OEM customers. 9About This Document. 11What’s new in this document . 11Supported Software. 11Product Overview. 13Hardware features. 13Control features. 16Power supplies.31Installing the FCX Switch. 33Unpacking the device. 33Package contents.33General requirements.33Installation tasks.34Installation precautions. 34General precautions.34Lifting precautions.35Power precautions.35Preparing the installation site.35Cabling infrastructure. 35Installation location.36Installing the device.36Desktop installation.37Rack mount installation. 37Connecting devices in a traditional stack. 41Stacking ports. 42Stacking configuration requirements. 43Stacking cables.44Stack size. 44Stacking topologies. 44Extended distance stacking.47Powering on the system.47Attaching a PC or terminal. 48Wiring map for serial cable. 49Installing and replacing a power supply unit. 50Installing or replacing fan trays. 50Installing an optional module . 52Brocade FCX Series Hardware Installation GuidePart Number: 53-1003616-033
Optional 2-port 10 Gbps SFP uplink module. 54Checking Network Devices and Testing Connectivity. 59Assigning permanent passwords. 59Setting passwords. 59Recovering from a lost password.60Configuring IP addresses. 60Devices running Layer 2 software. 61Devices running Layer 3 software. 62Performing a factory reset.65Connecting network devices. 65Connectors. 65Cable specifications. 65Cable specifications. 66Connecting to Ethernet or Fast Ethernet hubs. 66Connecting to workstations, servers, or routers. 68Connecting a network device to a fiber port.68Testing connectivity.72Pinging an IP address. 72Observing LEDs. 72Tracing a route.76Troubleshooting network connections. 76Digital optical monitoring.77Virtual cable testing.77Managing the FCX Hardware.81Managing temperature settings. 81Using the temperature sensor. 81Removing MAC address entries.84Displaying FCX CPU usage. 85Hardware maintenance schedule. 85Replacing a copper or fiber optic module.85Removing a copper or fiber optic module. 85Cabling a fiber optic module. 86Cleaning the fiber optic connectors. 87Brocade FCX Series Technical Specifications.89System specifications.89Ethernet. 89LEDs.89Other. 90Weight and physical dimensions. 90Environmental requirements. 90Power supply specifications (per PSU). 91Power consumption (maximum configuration).91Data port specifications (Ethernet).92Serial port specifications (DB9).93Serial port specifications (pinout RJ-45).93Serial port specifications (protocol).94Regulatory compliance (EMC). 94Regulatory compliance (safety).94Regulatory compliance (environmental).944Brocade FCX Series Hardware Installation GuidePart Number: 53-1003616-03
Troubleshooting . 97Diagnosing switch indicators .97Power and cooling problems. 97Installation. 97In-band access. 97Regulatory Statements.99CE Statement.99China ROHS. 99BSMI statement (Taiwan). 99Canadian requirements.100China CC statement.100Europe and Australia (CISPR 22 Class A Warning).101FCC warning (US only). 101Germany. 101KCC statement (Republic of Korea). 101VCCI statement.101Cautions and Danger Notices. 103Cautions. 103General cautions. 103Electrical cautions. 105Danger Notices. 106General dangers. 106Electrical dangers.106Dangers related to equipment weight. 108Laser dangers. 108Brocade FCX Series Hardware Installation GuidePart Number: 53-1003616-035
6Brocade FCX Series Hardware Installation GuidePart Number: 53-1003616-03
Prefac
Library, Software Downloads and Licensing tools Required for Sev 1-Critical and Sev 2-High issues: Continental US: 1-800-752-8061 Europe, Middle East, Africa, and Asia Pacific: 800-AT FIBREE . Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade expertise. For more .
