Transcription
Q4/2021 Englishexoplanexocad GmbHexoplan Supported Libraries,solely with parts legally marketed in the U.S.354 implant systems supported (6245 implants)exocad.com
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsADMIM-exoplan-libraries-US-en, 2021-11-25AB Dental Devices Ltd. (IL) 125 implants in 8 librariesI2 Screw Type23Ti, DC, PMI5 Conical33Ti, DC, PMI6 Narrow4I6 Narrow Integral11I6b One Piece Ball Attachment3I10 Trapeze14Ti, DC, PMI22 Screw Type13Ti, DC, PMI55 Conical23Ti, DC, PMAdin Dental Implant Systems Ltd. (IL) 94 implants in 4 libraries 1/2Swell 22circleOnly PGTouareg CloseFit 28circleOnly PGFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.2
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotFullyguidedImplant systemAvailable Original SleevesIncludedimplantsAvailable Implant SystemsAdin Dental Implant Systems Ltd. (IL) 2/2Touareg -OS22circleTouareg -S22circleADMIM-exoplan-libraries-US-en, 2021-11-25Alliance Global Technology (TW) 70 implants in 3 librariesBone Level SB-I23Bone Level SB-II24Bone Level SB-III23Anthogyr SAS (FR) 44 implants in 3 librariesAxiom BL 2.83Axiom BL PX21Ti, DC, PMTi, DC, PMAxiom BL REG20Ti, DC, PMTi, DC, PMFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.3
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsArgon Dental Vertriebs Gesellschaft mbH & Co. KG (DE) 60 implants in 3 librariesK3Pro Rapid28circleK3Pro Short12circleK3Pro Sure20circleTi, DC, PMFG not for Ø 6.0 mmTi, DC, PMTi, DC, PMADMIM-exoplan-libraries-US-en, 2021-11-25Bicon , LLC (US) 20 implants in 3 librariesMAX 2.5 Integra-CP 6circleFG not for Ø 4.0 mm, length 8 mmMU, stockNarrow Integra-CP 4circleFG for Ø 3.0 mmMU, stockSHORT Integra-CP 10circleFG not for Ø 6.0 mmMU, stockBioconcept Co., Ltd. (CN) 92 implants in 5 libraries 1/2BC Bone Level12Ti, DC, PMBC Tissue Level Standard17Ti, DC, PMBC Tissue Level Standard Plus19Ti, DC, PMFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.4
exoplan Supported LibrariesQ4/2021StecoThird partyCompatibleProsthetic ntsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsBioconcept Co., Ltd. (CN) 2/2BC Tissue Level Tapered Effect11Ti, DC, PMBV Bone Level Tapered33Ti, DC, PMADMIM-exoplan-libraries-US-en, 2021-11-25BioHorizons , Inc. (US) 97 implants in 8 librariesMount-free Tapered Internal24Mount-free Tapered Short4Ti, DC, PMTapered Immediate Molar6Ti, DC, PMTapered Internal14Tapered Plus14circlecircleTi, DC, PMTapered Pro Implants19circlecircleTi, DC, PMTapered PTG2Tapered Tissue Level14circlecircleTicirclecircleTi, DC, PMFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.5
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsBiotech Dental (FR) 17 implants in 1 libraryKontact 17ADMIM-exoplan-libraries-US-en, 2021-11-25BTI Biotechnology Institute S.L. (ES) 118 implants in 6 librariesExterna Tiny 20DCTiExterna Universal12DCTiExterna Universal Plus12Interna Universal29DCTi, DCInterna Universal Plus23DCTi, DCInterna Wide22DCTi, DCPM, DCTi, DC, PM, MUPM, DCTi, DC, PM, MUTiCAMLOG Biotechnologies GmbH (CH) 266 implants in 16 libraries 1/3CAMLOG Progressive-Line Promote Plusguide/screw-mounted15CAMLOG Progressive-Line Promote Plussnap-in15circlecirclecirclecircleFGFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.6
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsADMIM-exoplan-libraries-US-en, 2021-11-25CAMLOG Biotechnologies GmbH (CH) 2/3CAMLOG Screw-Line Promote guide/screw-mounted14CAMLOG Screw-Line Promote former-packaging19CAMLOG Screw-Line Promote Plusguide/screw-mounted14circleCAMLOG Screw-Line Promote PlusGuided11circleCAMLOG Screw-Line Promote Plusformer-packaging19CAMLOG Screw-Line Promote Plus snap-inFG not for Ø 5.0 mmPM, DCTi, PM, DCPM, DCTi, PM, DCPM, DCTi, PM, DCPM, DCTi, PM, DCcirclePM, DCTi, PM, DC19circlePM, DCTi, PM, DCCAMLOG Screw-Line Promote snap-in19circlePM, DCTi, PM, DCCONELOG Progressive-Line Promote Plusguide/screw-mounted19TI, PM, DCTi, PM, DCCONELOG Progressive-Line Promote Plussnap-in19TI, PM, DCTi, PM, DCCONELOG Screw-Line Promote Plusguide/screw-mounted19TI, PM, DCTi, PM, DCCONELOG Screw-Line Promote PlusGuided14TI, PM, DCTi, PM, DCcirclecirclecirclecircleFG not for Ø 5.0 circleFGFGFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.7
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsCAMLOG Biotechnologies GmbH (CH) 3/3CONELOG Screw-Line Promote Plusformer-packaging19circleTI, PM, DCTi, PM, DCCONELOG Screw-Line Promote Plussnap-in19circleTI, PM, DCTi, PM, DCiSy 12PM, DCADMIM-exoplan-libraries-US-en, 2021-11-25Cortex Dental Implants Industries Ltd. (IL) 79 implants in 5 librariesCLASSIX Conical15circleTi, DCTi, DC, PM, MUCLASSIX Internal Hex15circleTi, DCTi, PM, DCDYNAMIX Conical19circleTi, DCTi, DC, PM, MUDYNAMIX Internal Hex15circleTi, DCTi, PM, DCMAGIX Conical15circleTi, DCTi, DC, PM, MUCowellmedi Co., Ltd. (KR) 21 implants in 1 libraryINNO Submerged21Ti, DCFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.8
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotFullyguidedImplant systemAvailable Original SleevesIncludedimplantsAvailable Implant SystemsCSM Implant Co., Ltd. (KR) 41 implants in 2 librariesSubmerged III21Submerged20ADMIM-exoplan-libraries-US-en, 2021-11-25DENTIS Co., LTD. (KR) 118 implants in 6 librariess-Clean OneQ-SL43s-Clean SAVE8s-Clean SQ-SL27s-Clean straight8s-Clean tapered II16s-Clean tapered16FG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.9
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsDentium Co., Ltd. (KR) 94 implants in 5 librariesImplantium II16Implantium16DCNR Line18DCSuperLine II22PM, DCSuperLine22PM, DCTi, PM, DCTiADMIM-exoplan-libraries-US-en, 2021-11-25Dentsply Sirona Inc. (US) 146 implants in 6 libraries 1/2Ankylos C/X22Astra Tech OsseoSpeed EV44Astra Tech OsseoSpeed EV Profile24Frialit 17XiVE S25circleFG not for Ø 3.5 mm Ø 4.5 mm, lengths 6.6 mm 17 mm;FG not for Ø 5.5 mm Ø 7.0 mmcirclecircleFGFGcircleFGcircleFGcircleFG not for Ø 3.4 mm, Ø 3.8 mm Ø 4.5 mm, length18 mm; FG not for Ø 5.5 mmcirclecircleFGFGTiTi, PM, DCTi, DCTi, DC, PM, MUDCTiTI, PM, DCDCTi, DC, PM, MUFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.10
exoplan Supported LibrariesQ4/2021StecoThird partyCompatibleProsthetic ntsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsDentsply Sirona Inc. (US) 2/2XiVE TG14PM, DCDTI Implant Systems (TR) 23 implants in 2 librariesDTI Active Mini SLA5DTI Active Standard SLA18ADMIM-exoplan-libraries-US-en, 2021-11-25HiOssen Implant (US) 61 implants in 4 librariesETIII20circleETIV15circleSS - G/H1.814circleDC, PMSS - G/H2.812circleDC, PMFG not for Ø 5.0 mm Short, length 6 mmDCTi, DC, PM, MUDCTi, DC, PM, MUFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.11
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsHi-Tec Implants Ltd. (DE) 100 implants in 5 librariesEXPERT 15LOGIC 28LOGIC PLUS 22TAPERED SELF THREAD 20VISION 15ADMIM-exoplan-libraries-US-en, 2021-11-25Implacil de Bortoli Material Odontológico Ltda (BR) 101 implants in 6 libraries 1/2CYLINDRICAL HE20CYLINDRICAL HI19Maestro CM14TAPERED HE15circleOnly guided drilling without drill stops available;only for Ø 3.5 mmTAPERED HI13circleOnly guided drilling without drill stops available;only for Ø 3.5 mmFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.12
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsImplacil de Bortoli Material Odontológico Ltda (BR) 2/2TAPERED MORSE TAPER AR due cone20circleOnly guided drilling without drill stops available;only for Ø 3.5 mmImplance by AGS MEDİKAL ÜRÜNLERİ İTH. İHR. TİC. A.Ş. (TR) 31 implants in 2 librariesBone Level19Tissue Level12ADMIM-exoplan-libraries-US-en, 2021-11-25Implant Direct Sybron International, LLC. (US) 587 implants in 23 libraries 1/3GoDirect 15TiInterActive SBM 23TiTi, PM, DCLegacy1 HA-coated20TiTiLegacy1 SBM 20TiTiLegacy2 HA-coated34TiTiLegacy2 SBM 34TiTiFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.13
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsADMIM-exoplan-libraries-US-en, 2021-11-25Implant Direct Sybron International, LLC. (US) 2/3Legacy3 HA-coated34TiTiLegacy3 SBM 34TiTiLegacy4 HA-coated34TiTiLegacy4 SBM 34TiTiReActive SBM 20Ti, PM, DCRePlant SBM 20Ti, PM, DCScrewIndirect SBM 16Ti, MUScrewPlant SBM 15TiScrewPlus SBM 20TiSimply Iconic SBM 39simplyInterActive SBM 23FG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.14
exoplan Supported LibrariesQ4/2021StecoThird partyCompatibleProsthetic ntsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsADMIM-exoplan-libraries-US-en, 2021-11-25Implant Direct Sybron International, LLC. (US) 3/3simplyLegacy2 SBM 40simplyLegacy3 SBM 40simplyReActive SBM 20Ti, PM, DCsimplyRePlant SBM 20Ti, PM, DCSwishActive SBM 16SwishPlus SBM 16TiImplant Logistics Inc. (US) 37 implants in 4 librariesImplant One 100 series4Ti, DC, PMImplant One 300 series12Ti, DC, PMImplant One 400 series11Ti, DC, PMImplant One 500 series10Ti, DC, PMFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.15
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant Systemsimplantswiss by Novodent SA (CH) 34 implants in 2 librariesBone Level19Tissue Level15ADMIM-exoplan-libraries-US-en, 2021-11-25Keystone Dental Group (US) 128 implants in 7 librariesGenesis18circleAdvanced Classic19circlecircleTi, DCTi, PM, DC, MUAdvanced 19circlecircleTi, DCTi, PM, DC, MUDynamic19circlecircleTi, DCTi, PM, DC, MUPAI - Paltop Active Implant19circlecircleTi, DCTi, PM, DC, MUPCA - Paltop Conical Active19circlecircleTi, DCPrima Plus 15circleFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.16
exoplan Supported LibrariesQ4/2021StecoThird partyCompatibleProsthetic ntsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsKLOCKNER Implant System (ES) 59 implants in 2 librariesESSENTIAL CONE31circleFG PG for implant lengths 8 mm - 14 mmVEGA 28circleOnly PGTi, PM, DCADMIM-exoplan-libraries-US-en, 2021-11-25Leone S.p.A. (IT) 24 implants in 4 libraries2.93TiImplant12TiMax Stability8TiShort 6.51TiMedical Instinct Deutschland GmbH (DE) 32 implants in 2 librariesBoneTrust plus cone16Ti, PM, DCBoneTrust plus hex16Ti, PM, DCTi, DCFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.17
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsADMIM-exoplan-libraries-US-en, 2021-11-25MegaGen Implant Co., Ltd. (KR) 115 implants in 7 librariesAnyOne Internal Deep Thread27circleFG for Ø 4.5 Ø 5.5 mm, lengths 7 mm - 13 mmTi, PM, DCAnyOne Internal Regular Thread34circleFG for Ø 3.5 - Ø 6.0 mm, lengths 7 mm - 13 mmTi, PM, DCAnyOne Internal Special Length4circleFG for Ø 5.0 and Ø 6.0 mm, length 7 mmTi, PM, DCAnyRidge Internal Core 2.85circleFG for implant lengths 7 mm - 13 mmTi, PM, DCAnyRidge Internal Core 3.323circleFG for implant lengths 7 mm - 13 mmTi, PM, DCAnyRidge Internal Core 4.012circleFG for implant lengths 7 mm - 13 mmTi, PM, DCMiNi Internal10circleFG for implant lengths 7 mm - 13 mmTi, PM, DCMIS Implants Technologies Ltd. (IL) 98 implants in 4 libraries 1/2C119M430SEVEN30circlecirclecirclecircleFG PT for implant lengths 8 mm - 13 mmFG PT for implant lengths 6 mm - 13 mm;FG not for Ø 6.0 mmTi, PM, DCTi, DCTi, PM, DCTi, PM, DC, MUTi, PM, DCTi, PM, DC, MUFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.18
exoplan Supported LibrariesQ4/2021StecoThird partyCompatibleProsthetic ntsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsMIS Implants Technologies Ltd. (IL) 2/2V319circlecircleFG PT for implant lengths 8 mm - 13 mmTiTi, PM, DCADMIM-exoplan-libraries-US-en, 2021-11-25Neobiotech Co., Ltd. (KR) 106 implants in 6 librariesIS-II active19circleIS-III active19circleIT-III active 1.819IT-III active 2.819IT-III active Wide Neck 1.815IT-III active Wide Neck 2.815Neodent (BR) 299 implants in 17 libraries 1/3Alvim CM Acqua 15circlecircleOnly guided drilling without drill stops for FG PTavailable; FG for Ø 3.5 mm Ø 4.3 mmPM, DCAlvim CM NeoPoros15circlecircleOnly guided drilling without drill stops for FG PTavailable; FG for Ø 3.5 mm Ø 4.3 mmPM, DCFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.19
exoplan Supported LibrariesQ4/2021circlecircleOnly guided drilling without drill stops for FG PTavailable; FG for Ø 3.5 mm Ø 4.3 mmPM, DCDrive CM NeoPoros15circlecircleOnly guided drilling without drill stops for FG PTavailable; FG for Ø 3.5 mm Ø 4.3 mmPM, DCDrive GM Acqua 18circleOnly guided drilling without drill stops availablePM, DCDrive GM NeoPoros18circleOnly guided drilling without drill stops availablePM, DCFacility Acqua 3circleOnly guided drilling without drill stops availablePM, DCFacility NeoPoros3circleOnly guided drilling without drill stops availablePM, DCHelix GM Acqua 38circleOnly guided drilling without drill stops available;not for Ø 7.0 mmPM, DCHelix GM Long NeoPoros6Helix GM NeoPoros38circleTitamax CM NeoPoros26circleTitamax EX CM Acqua 15circleOriginal15StecoDrive CM Acqua Implant systemThird partyCompatibleProsthetic dedCommentsAvailable Original SleevesIncludedimplantsAvailable Implant SystemsADMIM-exoplan-libraries-US-en, 2021-11-25Neodent (BR) 2/3PM, DCOnly guided drilling without drill stops available;not for Ø 7.0 mmPM, DCcircleOnly guided drilling without drill stops for FG PTavailable; FG for Ø 3.5 mm, Ø 3.75 mm Ø 4.0 mmPM, DCcircleOnly guided drilling without drill stops availablePM, DCFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.20
exoplan Supported LibrariesQ4/2021Pilot17circlecircleTitamax GM Acqua 26PM, DCTitamax GM NeoPoros26PM, DCTitamax WS NeoPoros5OriginalFullyguidedTitamax EX CM NeoPorosImplant systemStecoIncludedimplantsCompatibleProsthetic ComponentsThird partyCompatibleSleevesnt-tradingAvailable Original SleevesCommentsAvailable Implant SystemsNeodent (BR) 3/3Only guided drilling without drill stops availablePM, DCADMIM-exoplan-libraries-US-en, 2021-11-25Neoss GmbH (GB) 69 implants in 5 librariesProActive Edge16circleOnly PGPM, DCProActive Straight Ø3.254circleOnly PGPM, DCProActive Straight24circleFG and PGPM, DCProActive Tapered19circleFG and PGPM, DCProActive Wide6circleFG and PG for Ø 6.0 mmPM, DCFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.21
exoplan Supported LibrariesQ4/2021Third partyCompatibleProsthetic CommentsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsADMIM-exoplan-libraries-US-en, 2021-11-25Nobel Biocare Services AG (CH) 284 implants in 16 libraries 1/2circleBrånemark System Mk III Groovy22circlecircleFGBrånemark System Mk III Shorty3circlecircleFGBrånemark System Mk III TiUnite 24circleBrånemark System Mk IV TiUnite 13NobelActive 3.04NobelActive 24circlecircleFGNobelParallel Conical Connection27circlecircleFGNobelReplace Conical Connection15circlecircleFGNobelReplace Conical Connection PMC15circlecircleFGNobelReplace Straight Groovy14NobelReplace Tapered Groovy20circleFG for Ø 3.75 mm RP Ø 4.0 mm RPcircleFGTi, PM, DCTi, PM, DCTi, PM, DCTi, PM, DCTi, PM, DCcirclecirclecirclecirclecircleTi, PM, DCTi, PM, DCTi, PM, DCTi, PM, DCTi, PM, DCcirclecirclecircleFGTi, PM, DCFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt, GermanyCopying, publishing, extracting content or transferring to third party is prohibited without written permission of exocad GmbH.22
exoplan Supported LibrariesQ4/2021StecoThird partyCompatibleProsthetic ntsPilotImplant systemFullyguidedAvailable Original SleevesIncludedimplantsAvailable Implant SystemsNobel Biocare Services AG (CH) 2/2circleNobelSpeedy Groovy37NobelSpeedy Replace19Replace Select Tapered PMC20circlecircleFGReplace Select Tapered TiUnite 19circlecircleFGReplace Select TC8circlecircleFG not for lengths 18 mm - 25 mm; FG not for Ø 5.0 mm RPTi, PM, DCFGTi, PM, DCcircleTi, PM, DCcircleTi, PM, DCTi, PM, DCADMIM-exoplan-libraries-US-en, 2021-11-25NUVO (BR) 23 implants in 1 libraryInternalFIT ️23Ti, PM, DCTi, PM, DCOSSTEM IMPLANT CO., LTD (KR) 79 implants in 3 librariesSS Implant System26circleTS Implant System35circleFG not for length 7 mm extra shortUS Implant System18circleFG not for Ø 5.0 mm, length 6 mmPM, DCTiTi, PM, DC, MUTi, PM, DCFG Fully guided workflow available, UNI Universal compatibility, PT Compatible pilot sleeves available, DC Direct-to-Implant Interfaces available, Ti Titanium Bases available,Stock Stock Abutments available, MU Multi-Unit Abutments available, PM Pre-milled blanks available, PG partially guided workflow (guided drilling with manual implant insertion) available by exocad GmbH, Julius-Reiber-Straße 37, 64293 Darmstadt,
Biotech Dental (FR) 17 implants in 1 library Kontact 17 BTI Biotechnology Institute S.L. (ES) 118 implants in 6 libraries Externa Tiny 20 DC Ti Externa Universal 12 DC Ti Externa Universal Plus 12 Ti Interna Universal 29 DC Ti, DC Interna Universal Plus 23 DC Ti, DC Interna Wide 22 DC Ti, DC CAMLOG Biotechnologies GmbH (CH) 266 implants in 16 libraries 1/3 CAMLOG Progressive .
