Transcription
License Plate LightsAIR CLEANERSRectangular license light withchrome housing.Available in different colours2wires (hard wired)UP30362P White lensNOTE: WARRANTY VOID UNLESS SERVICED WITH AEROFLOW CLEANING KIT AF2000-5050AIR FILTERSLicense Plate Light & BracketStamped stainless steel, molded lens, bracket, molded rubber pad,stainless screws and 12 volt bulb.BDHR-13550Skull Style Plate BoltsAIR FILTER ASSEMBLIES.Chrome plated zinc die cast skull stylelicence plate bolts with red jewelled eyes.Pack of 2.UP70315Chrome Plated Skull BoltsStand out from the crowd with a magnificent lookingAeroflow air cleaner.These air cleaners are stamped from high quality steel.Available in many different great finishes and styles forthat custom look you are after. Chrome-plated or blackfinish with reusable/washable or paper elements.Aeroflow’s air filter assemblies work with all popular5-1/8” (130mm) diameter carburettors. The 14”(355.60mm) air filter assemblies come with a dropbase that sits 1-1/8” (28mm) below the carburettor.Bullet Nut StyleAF2251-3150Chrome Bullet style licence plate blots.Pack of 4UP10888 Gold ColourUP10889 Chrome PlatedELECTRICAL, IGNITION, TUNING & LIGHTINGAF2251-304014” X 3” (355.6mm X 76.2mm)Black Full Flow Assembly 1-1/8”(28mm) Drop base 5-1/8 (130mm)neck with black reusable/washableelement.Replacement element AF2041-1650Chrome 3 Wing Bullet Nut StyleChrome Bullet style with 3wings licence plate bolts.Pack of 4UP10887 Chrome PlatedAF2851-304014” X 3” (355.6mm X 76.2mm) ChromeFull Flow Assembly 1-1/8” (28mm)Drop base 5-1/8 (130mm)neck with black reusable/washableelement.Replacement element AF2041-1650AF2851-31509” x 2-3/4” (228.6mm x 7mm) Chrome FullFlow Assembly 5-1/8” (130mm) neck with blackreusable/washable elementReplacement element AF2041-3530LICENSE PLATEBRACKET (SS);FITS - 1932-64 PICKUPAt 65 miles an hour (or more) a lot of pressure is exerted on thesebrackets as there is nothing aerodynamic about a license plate.That’s why we stamp ours from heavy gauge steel. They’re builttough and can take a 65 mph breeze with gusts up to 100 mph.Dimensionally they are identical to original and are ready to bolton. You are guaranteed a high-quality, and long lasting product.Polished Stainless Steel.BDA-13406-SSAF2251-140114” Black Full Flow Lid Top withblack reusable/washable media.AF2851-140114” Chrome Full Flow Lid Top withblack reusable/washable media.AF2251-09019” Black Full FlowLid Top with blackreusable/washablemedia.AF2851-09019” Chrome FullFlow Lid Top withblack reusable/washable media.VIB-5034-SSAF2251-1110AF2251-129014” X 4” (355.6mm X 101.6mm) BlackAir Cleaner Assembly 1-1/8” (28mm)Drop base 5-1/8 (130mm)neck with black reusable/washableelement.Replacement element AF2041-3750VIB-13406-SS1932 Ford License Plate BracketsAF2851-129014” X 4” (355.6mm X 101.6mm)Chrome Air Cleaner Assembly 1-1/8”(28mm) Drop base 5-1/8 (130mm)neck with black reusable/washableelement.Replacement element AF2041-3750Polished stainless steel front and rear licence plate brackets for1932 Ford.1932 Front Licence Plate BracketVIB-5034-SS1932 Rear Licence Plate BracketVIB-13406-SSSpreader Bar License Plate BracketsThese polished aluminium rear spreader bar license plate bracketscome ready to install with hardware. Hardware included: 2-3/8”nutserts, 2- 1/4-20 countersunk allen819” x 2-3/4”(228.6mm x 7mm)Black Full Flow Assembly5-1/8” (130mm) neck with black reusable/washable elementReplacement element AF2041-3530DescriptionSpreader Bar License Plate BracketPart NoAHRP627309” x 2” (228.6mm x50.8mm)Black Air CleanerAssembly 5-1/8”(130mm) neck withblack reusable/washable element.Replacement 014” X 3” (355.6mm X 76.2mm) BlackAir Cleaner Assembly 1-1/8” (28mm)Drop base 5-1/8 (130mm)neck with black reusable/washableelement.Replacement element AF2041-165014” X 3” (355.6mm X 76.2mm)Chrome Air Cleaner Assembly 1-1/8”(28mm) Drop base 5-1/8 (130mm)neck with black reusable/washableelement.Replacement element AF2041-1650AF2251-11209” x 2-3/4” (228.6mm x 7mm)Black Air Cleaner Assembly 5-1/8”(130mm) neck with black reusable/washable element.Replacement element AF2041-3530AF2851-11209” x 2-3/4” (228.6mm x 7mm)Chrome Air Cleaner Assembly 5-1/8”(130mm) neck with black reusable/washable element.Replacement element AF2041-35309” x 2”(228.6mm x50.8mm)Chrome AirCleaner Assembly5-1/8” (130mm) neckwith black reusable/washable element.Replacement element AF2041-3527AF2251-13316-3/8” x 2-1/2” (161.4mmx 63.8mm) Black AirCleaner Assembly 5-1/8”(130mm) neck withblack reusable/washableelement.Replacement elementAF2041-2116AF2851-13316-3/8” x 2-1/2”(161.4mm x 63.8mm)Chrome Air CleanerAssembly 5-1/8”(130mm) neck withblack reusable/washableelement.Replacement elementAF2041-2116
AIR FILTER CLEANING PRODUCTSAeroflow’s air filter cleaning products are specifically formulated forcleaning and re-oiling all Aeroflow reusable/washable filters and all typesof oil-based air filters.Part NoAF2000-50509” x 5” (228.6mm x 127mm) BlackFull Flow Assembly 5-1/8” (130mm)neck with black reusable/washableelementReplacement element AF2041-3650AF2000-0606AF2000-0533AF2851-13659” x 5” (228.6mm x 127mm) ChromeFull Flow Assembly 5-1/8” (130mm)neck with black reusable/washableelementReplacement element AF2041-3650CHROMEBLACK AF2256-1110AF2856-11109” x 2” (228.6mm x 50.8mm) Black Air CleanerAssembly 5-1/8” (130mm) neck with paperelementReplacement element AF2046-2117BLACKCHROME AF2856-1280AF2256-128014” X 3” (355.6mm X 76.2mm)Chrome Air Cleaner Assembly 1-1/8” (28mm) Dropbase 5-1/8 (130mm)neck with paper element.Replacement element AF2046-2110CHROME AF2856-1331BLACK AF2256-13316-3/8” x 2-1/2” (161.4mm x 63.8mm)Chrome Air CleanerAssembly 5-1/8” (130mm) neckwith paper elementReplacement element AF2046-2116AF2251-0900AF2251-1411AEROFLOW ROUND FILTER BASES.Available in chrome and black in standard or drop base to adjustAF2851-0900filter heights to suit your requirements.Suits 130.17mm (5-1/8”) flange (stardard 4150 Holley)Part NoFinishDescriptionAF2251-1400Black14” (355.60mm) Flat BaseAF2851-1400Chrome14” (355.60mm) Flat BaseAF2251-1411Black14” (355.60mm) 1-1/8” (28mm)Recessed BaseAF2851-1411Chrome14” (355.60mm) 1-1/8” (28mm)Recessed BaseAF2251-0900Black9” (228.60mm) Flat BaseAF2851-0900Chrome9” (228.60mm) Flat BaseAF2251-1400AF2851-1400AF2851-1411REPLACEMENT REUSABLE / WASHABLE ROUND COTTON FILTER ELEMENTSREPLACEMENT PAPER ELEMENTSAF2046-2116O.D.6-3/8” 162mmI.D.5-1/16” 131mmHeight 2-1/2” 63.5mmSuits: 6-3/8” Carb mHeight 2-1/4”57mmSuits: 14” Carb AssemblyAF2046-2117O.D.9”228mmI.D.7-43/64” 195mmHeight 2”51mmSuits: 14” Carb Assembly.AF2046-2110O.D.14”356mmI.D. 11-13/16”300mmHeight 3”76mmSuits: 14” Carb AssemblyAF2041-3650O.D.9”228mmI.D.7-19/32” 193mmHeight 5”127mmSuits: 9” Carb AssemblyAF2041-3760O.D.14”356mmI.D.12-11/64” 309mmHeight 5”127mmSuits: 14” Carb AssemblyAF2041-3640O.D.9”228mmI.D.7-37/64” 192.5mmHeight 4”101.6mmSuits: 9” Carb AssemblyAF2041-3750O.D.14”356mmI.D.12-13/64” 310mmHeight 4”101.6mmSuits: 14” Carb Asemmbly.AF2041-3530O.D.9”228mmI.D.7-37/64” 192.5mmHeight 2-3/4” 70mmSuits: 9” Carb AssemblyAF2041-1650O.D.14”356mmI.D.12-13/64” 310mmHeight 3”76mmSuits: 14” Carb 7/64” 192.5mmHeight 2”50.8mmSuits: 9” Carb AssemblyO.D.6-3/8” 162mmI.D.2-15/64” 133mmHeight 2-1/2” 63.5mmSuits: 9” Carb AssemblyAIR CLEANERS, SCOOPS & FILTERSAF2251-1365DescriptionAeroflow air filter cleaning kit contains 295ml(10oz) oil pump style 295ml (10oz) cleaner pumps styleAeroflow air filter cleaner 295ml (10oz) pump styleAeroflow air filter oil 295ml (10oz) pump styleCHEVROLET SLANT EDGE AIR CLEANERSSlant-Edge Air Cleaners are the perfect way to complete your dress-up look in premium Slant-Edgestyle. Whether you have Slant-Edge valve covers, or a set from a different series, these air cleanerswith prominent raised or recessed emblems will bring your engine look together in head turningfashion. They are supplied with a genuine 3” GM air filter elements for maximum airflow. The aircleaner lid attaches to a short stud that is screwed into the centre of the carburettor. Lid has athreaded boss on the underside, and is simply spun into place by the installer. Each kit is suppliedwith necessary mounting hardware. Technical Note: After installing a new air cleaner, always lowerthe hood slowly to confirm sufficient clearance visually. Minimum clearance of 3-3/4” is requiredfrom the top of the carburettor gasket area to the underside of the hood. The air cleaner bases arerecessed for a low profile appearance, maximum performance, and hood clearance. Patent Pending.DescriptionPart NoBlack Crinkle 14” x 3” With Raised EmblemPR141-830Orange 14” x 3” With Raised EmblemPR141-831Cast Grey Crinkle 14” x 3” With Raised Emblem PR141-832Polished 14” x 3” With Recessed EmblemPR141-833Black Crinkle 14” x 3” With Recessed Emblem PR141-834Chrome 14” x 3” With Recessed EmblemPR141-835Slant-Edge Air Cleaners are the perfect way to complete your dress-up look in premium SlantEdge style. Whether you have Slant-Edge valve covers, or a set from a different series, theseair cleaners with prominent raised or recessed emblems will bring your engine look togetherin head turning fashion. They are supplied with a genuine 3” Motorcraft air filter elements (partno. FA612R) for maximum airflow. The air cleaner lid attaches to a short stud that is screwedinto the centre of the carburettor. Lid has a threaded boss on the underside, and is simply spuninto place by the installer. Each kit is supplied with necessary mounting hardware.DescriptionPart NoBlack Crinkle 14” x 3” With Raised EmblemPR302-380Blue 14” x 3” With Raised EmblemPR302-381Cast Grey Crinkle 14” x 3” With Raised Emblem PR302-382Polished 14” x 3” With Recessed EmblemPR302-383Chrome 14” x 3” With Recessed EmblemPR302-384Black Crinkle 14” x 3” With Recessed Emblem PR302-38582FORD RACING SLANT EDGE AIR CLEANERS
14” FLAMEDAIR CLEANERSuper Flow Air CleanerChrome plated steel air cleaner withwashable foam element.Fits carburettors with 5-1/8” neck.Includes mounting hardware.Super Flow Air CleanerRPCR2196Chrome Air Cleaner LidAttractive chrome plated air cleanerlid for Chev 1988-92 factory aircleaner assemblies. 15-3/8” diameter.Chrome Air Cleaner LidRPCR214614” FINNED ROUND AIR CLEANERAir Cleaner AdaptersBlack plastic air cleaner adapters to allowHolley style aftermarket air cleanerassemblies with 5-1/8” hole to be fittedto smaller carburettors.Air Cleaner Adapter, 2-5/8” Neck to 5-1/8”RPCR2176 Nostalgic Finned Design Polished AluminiumTop and Base Fits Carburettors with5-1/8” Neck Polished Steel MountingStud Included Replaceable Paper Element14” x 3” with Flat Base RPCR672212” Oval Air Cleaners Chromed aluminium top withraised flames Polished aluminium base Washable Element Polished steel mounting stud included Fits carburettors with 5-1/8” neckSingle Carb 12” x 2” - Chrome FlamesSingle Carb 12” x 2” - Red FlamesRPCR5121RPCR512412” FINNED OVAL AIR CLEANERAir Cleaner SpacersBlack plastic air cleaner spacers forHolley style carburettors with 5-1/8” neck.Air Cleaner Spacer – 1/2” TallAir Cleaner Spacer – 1” TallAir Cleaner Spacer – 1-1/2” TallAir Cleaner Spacer – 2” Tall Chrome Steel Topand Base Embossed Flame Top 4150 or Dominator Style Polished SteelMounting Stud Included Replaceable Paper Element14” x 3” with Flat BaseRPCR819614” x 3” with Drop BaseRPCR819514” x 3” Dominator StyleRPCR8199RPCR2378RPCR2379RPCR2326RPCR2380 Nostalgic Finned Design Polished Aluminium Top and Base Fits Carburettors with 5-1/8” Neck Polished Steel Mounting Stud Included Replaceable Paper Element12” x 2” Tallwashable element RPCR632114” LouveredStyle Air Cleaner SetChrome steel top withChrome steel base.Fits single quadcarburator with 5-1/8”neck. Polished steelmounting stud included.RPCR4196Flat base 3” tall paper filterAIR CLEANERS, SCOOPS & FILTERS6-3/8” MUSCLECAR AIR CLEANER Chrome Steel Top and Base Fits Carburettorswith 5-1/8” Neck Mounting Stud andWing Nut Included Replaceable Paper Element6-3/8”x 2.5” Raised BaseRPCR2292RPCR4195Recessessed Base3” tall paper filter14” MUSCLECAR AIR CLEANER Chrome Steel Topand Base 4150 or Dominator Style Polished Steel MountingStud Included Replaceable Paper Element14” x 3” with Flat BaseRPCR800014” x 3” with Drop BaseRPCR219514” X 3” Dominator StyleRPCR2395MR GASKET - Air Filter Assembly,Zinc Base/Chrome Plated steel lidMG1486 - Chrome Air Cleaner - 6-1/2” x 1-1/2”STEEL CADILLAC AIR CLEANERBased on the style and dimensions of the 1951-56 Oldsmobile andCadillac air cleaners. This exciting new product will look at homein any street rod, hot rod, or traditionally styled period perfect car.Measuring a whopping 18-1/4² wide, our air cleaner is no wimpy,scaled-down version of this classic design. This new air cleaner hasthe same external dimensions as the original Oldsmobile oil-bathpart. However, our version uses an off-the-shelf 14 inch diameterby 4 inch tall filter element. No fiberglass construction here, steel isreal! Stamped from heavy gauge steel, fully spot welded together andthen powder coated in a tough semi-gloss finish. The electroplatedair cleaner base is also stamped steel and is designed to fit mostcarburettors and throttle bodies. The air cleaner is notched at the rearto provide clearance for the large diameter, GM, HEI distributors. Notcontent with anything normal, we designed and produced a uniquewing nut to complement the air cleaner. This chrome plated, rocketshaped nut was modeled after 50s era space vehicles and measuresnearly 1- 1/8 inches tall. Ships as a complete, ready-to-install kit.including housing, base, element and nut.TN8500 Steel Caddy/Olds Air Cleaner (full size)TN8510 Steel Caddy/Olds Air Cleaner (7/8” scale)14” MUSCLE CAR S/S AIR CLEANER Stainless Steel Top and Chrome Base Fits Carburettors with 5-1/8” Neck Polished Steel Mounting Stud Included Replaceable Paper Element14” x 3” with Flat Base
fashion. They are supplied with a genuine 3” GM air filter elements for maximum airflow. The air . cleaner lid attaches to a short stud that is screwed into the centre of the carburettor. Lid has a threaded boss on the underside, and is simply spun into place by the installer. Each kit is supplied with necessary mounting hardware. Technical Note: After installing a new air cleaner, always lower
