Transcription
OWNER’S GUIDESV1106www.sharkclean.com
WARNINGSIMPORTANT SAFETY INSTRUCTIONSFor Household Use OnlyWHEN USING YOUR SHARK CORDLESS VACUUM,BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BEFOLLOWED, INCLUDING THE FOLLOWING:READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK CORDLESS VACUUM.GENERAL ELECTRICAL SAFETY:WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK ORINJURY DO NOT USE OUTDOORS OR ON WET SURFACES.1DO NOT use or charge the unit outdoors.2DO NOT use or charge the unit on wet surfaces.3 DO NOT immerse vacuum cleaner, charging base orcharging adapter in water or other liquids.4 DO NOT handle vacuum, charging base or chargingadapter with wet hands.5 DO NOT use charging adapter if power cord has beendamaged.6 DO NOT abuse the charging adapter cord.NEVER carry the charging adapter or charging base bythe cord.7 DO NOT unplug the charging adapter by pulling oncord; to unplug, grasp the plug, not the cord.8 DO NOT use charging adapter with an extension cord.Plug adapter directly and only in a standard (120V.,60Hz) electrical outlet.9 DO NOT run the vacuum over the charging adaptercord.10 Keep charging adapter cord away from heatedsurfaces.15 Store the cordless vacuum indoors. Put the cordlessvacuum away after use to prevent accidents.34 DO NOT use cordless vacuum cleaner, charging baseor charging adapter if it has been dropped, damaged,left outdoors or submerged in water. Return toEURO-PRO Operating LLC for examination, repair oradjustment.16 Use only as described in this manual. DO NOT use forany purpose other than described in this user’s guide.35 Keep hair, face, loose clothing, fingers and all bodyparts away from openings and moving parts.17 Use only cleaning attachments supplied with this unit.36 This product includes rechargeable nickel metalhydride batteries. Batteries must be recycled ordisposed of properly. Do not incinerate batteries orexpose to high temperatures as they may explode.GENERAL USE:14 Use only on dry, indoor surfaces.18 Keep your work area well lit.19 Keep the vacuum moving over the carpet surface at alltimes to avoid damaging the carpet fibers.20 DO NOT put any objects into openings.21 DO NOT use with any opening blocked; keep free ofdust, lint, hair and anything that may reduce airflow.22 DO NOT use the vacuum cleaner without dust cup andfilter in place.23 DO NOT vacuum up any liquids.39 Batteries are to be recycled or disposed of safely.25 DO NOT use to pick up flammable or combustibleliquids such as gasoline or use vacuum in areas wheretheir fumes may be present.40 Before turning on the vacuum:26 DO NOT pick up toxic solutions such as chlorine bleach,ammonia or drain cleaner.27 DO NOT use in an enclosed space where vapors arepresent from paint, paint thinner, moth-proofingsubstances, flammable dust or other explosive or toxicmaterials.28 DO NOT run the vacuum over large-sized objects.29 DO NOT pick up hard or sharp objects such as glass,nails, screws or coins that could damage the vacuumcleaner.12 Only use charging adapter provided with the vacuum. Itis marked “For SV1106 models only”.30 DO NOT place vacuum on unstable surfaces such aschairs or tables.13 Always turn the vacuum off before connecting ordisconnecting the motorized floor brush.31 Use extra care when cleaning on stairs.TOLL FREE: 1-800-798-7398DUST CUP/FILTER: M ake sure that the dust cup and filter are securely inplace after routine maintenance. M ake sure that all components and filters arethoroughly dry after routine cleaning. O nly use filters and accessories provided by EUROPRO Operating LLC. [Failure to do so will void thewarranty.]However, there is no guarantee that interference willnot occur in a particular installation. If this equipmentdoes cause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to tryto correct the interference by one or more of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment andreceiver. Connect the equipment into an outlet on a circuitdifferent from that to which the receiver isconnected. Consult the dealer or an experienced radio/TVtechnician for help.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.32 DO NOT allow the vacuum to be used as a toy.33 Close attention is necessary when used by or nearchildren.238 The battery must be removed from the appliancebefore the appliance is discarded.24 DO NOT pick up anything that is burning or smokingsuch as cigarettes, matches or hot ashes.11 DO NOT attempt to use this charging adapter with anyother product nor attempt to charge this product withanother charging adapter.This manual covers model SV110637 Leaks from battery cells can occur under extremeconditions. If the liquid gets on the skin, washimmediately with soap and water. If the liquid gets intothe eyes, flush them immediately with clean water for aminimum of 10 minutes and seek medical attention.Warning: Changes or modifications to this unit notexpressly approved by the party responsible forcompliance could void the user’s authority to operatethe equipment.Note: This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications.SAVE THESEINSTRUCTIONSwww.sharkclean.com3
USING YOUR SHARK CORDLESS VACUUMASSEMBLYUSE YOUR CORDLESS VACUUMTO CLEAN BARE FLOORS,CARPETS AND RUGS.Ab Lightly press the power buttonon the motorized floor brushwith your foot to turn thevacuum on to a high speedoptimized for carpet cleaning.fig. 2EcFMAXIMIZING THE LIFE OF YOURBATTERYdD1 To enhance battery life, this vacuumis equipped with an advanced featurethat will shut off the vacuum whenthe battery is almost fully discharged.If the vacuum shuts off while in use,charge the unit until the completeoval around the power button isilluminated, indicating a full charge.JGHaChargingIKVACUUM COMPONENTSA Main BodyD Dust CupE Dust Cup ReleaseF Upper Dust Cup Door ReleaseG Lower Dust Cup Door ReleasePower ButtonJ3 Use a screwdriver to secure thehandle assembly in place with thebolt (taped to the handle duringshipping). (fig. 1c)4 Ensure that the dust cup issecurely in place. (fig. 1d)H Motorized BrushCHARGINGCharging AdapterK Charging BaseTECHNICAL SPECIFICATIONS:Volts: 14.41 The charge adapter plug will fitinto the charging base only oneway. Insert the charging adapterplug by aligning the arrow on theplug with the arrow next to thecharging jack on the back of thecharging base. (fig. 2)2 Place the vacuum on the chargingbase to charge. Charge the unitfor 7 hours before using thevacuum for the first time. (fig. 3)4ChargeCompletefig. 4fig. 3ASSEMBLY2 Insert the handle pole into the topof the main body. (fig. 1b)C ScrewIfig. 11 Insert the vacuum body into themotorized brush. (fig. 1a)B Handle Press the button again to switchto a lower speed optimized forbare floor cleaning. On thissetting the vacuum will run forapproximately 17 minutes. TheLED lights around the powerbutton will indicate your speed.1 Place your foot lightly on the topof the motorized brush and tilt thehandle back to release the unitfrom the locked upright position.BCOn this setting, the vacuumwill run for approximately 12minutes.TOLL FREE: 1-800-798-73983 This unit is equipped with aprecision charger that monitorsthe batteries to ensure a fullcharge for every use and to extendthe life of the batteries. Dependingon usage, the time for a fullcharge is 4 to 7 hours.4 One half of the blue LED lightaround the power button willilluminate while the unit ischarging. When the charge iscomplete, the complete oval willbe illuminated. (fig. 4)I f the charging light does notilluminate, ensure that thecharging adapter is pluggedin properly to the wall outletand to the back of the chargingbase. Also ensure that theunit is properly seated in thecharging base.2 Charge the vacuum for 7 hoursbefore initial use. After initial use,each recharge will take 4 to 7 hours.A complete oval around the powerbutton will illuminate when the chargeis complete.3T he precision charger monitors thebatteries so you don’t have to. Acomplete charge can take as little as4 hours, but may take up to 7 hoursbecause the charger monitors batteryproperties to extend battery life.Leaving the unit in the charger pastthe complete charge time will NOTharm the batteries.4 If the vacuum has never been usedor has not been used for an extendedperiod of time, it will take 3 to 5complete charge and run down cyclesto realize the full operational time ofthe vacuum.5 Do not store or charge in areas of hightemperature or humidity.6 Use only the charge adapter suppliedwith this unit, marked with “ForSV1106 Model Only”. If other chargersare used, the battery can fail causingdamage to the battery, to the vacuum,or to personal property. IMPORTANT: The indicator lightaround the power button willflash if the brush roll stopsdue to a jam. This feature isdesigned to protect the LifetimeBelt that powers the brushroll.See “Restarting After a Jam” onpage 8.BARE FLOOR Press the button again to turnthe unit off.CARPETBATTERY RECONDITIONINGBATTERY REPLACEMENTIf you experience shorter run time over thelife of the vacuum, perform the followingbattery reconditioning steps. Thesesteps can also be performed as monthlymaintenance for maximum battery life.1 Push the connector terminals togetheruntil they click into place.1 Charge the vacuum for a minimum of 7hours.2 Run the vacuum until it turns itself off.3 Charge the vacuum for a minimum of 7hours.BATTERY REMOVAL, REPLACEMENTAND DISPOSAL2 Replace the new battery pack into thebattery compartment, taking care totuck the wiring completely in so thatthe wiring does not interfere with thebattery access door.3 Place the battery door onto the bottomof the nozzle, slide it back into placeand move the sliding tab next to thedoor to the lock position.CAUTION:The cordless vacuum is powered by Ni-Mhbatteries, which must be recycled ordisposed of properly in accordancewith state, federal and local laws. Ifuncertain as to how to remove the batterypack, we suggest that you take yourvacuum to a reputable small applianceservice technician to have this serviceperformed. BATTERY REMOVAL Do not remove or damage the batterycasing.1Ensure that the unit is Off.2 Never open the battery compartmentexcept to replace or dispose of thebattery pack.3 The battery door is on the bottom ofthe floor nozzle. Turn the unit over andpush the sliding tab located next to thebattery door to the unlock position.Slide and lift the battery door off of thenozzle.Use only with battery pack supplied. Never use ordinary batteries forreplacement as these may leak anddamage your vacuum Do not attempt to remove the batterypack from the unit to charge. Never throw the battery pack or theappliance into a fire or incinerate it. Do not place the batteries on metalsurfaces. Do not touch metal parts of thebatteries together as the batteries willoverheat.4 Remove the battery pack by pulling onthe battery strap.5 Grasp the white connector terminalsand push down on the lever with yourthumb. Pull to disconnect.Call customer service at 1 (800) 798-7398 or visit our web site at www.sharkclean.com to order a replacement battery pack.www.sharkclean.com5
CARE AND MAINTENANCEfig. 10fig. 11fig. 6fig. 9fig. 8fig. 12fig. 5fig. 7 CAUTION: Remove the unit fromthe charging stand before anyservicing.EMPTYING THE DUST CUPTo maintain the best performance ofyour vacuum, empty the dust cup afterevery use or as debris approaches the“MAX FILL” line. Never operate thevacuum without the dust cup and filterin place.1 Turn off the vacuum beforeremoving the dust cup.3 Holding the carry handle, placethe dust cup inside a trashreceptacle and press the lowerdust cup door release button.Gently tap the dust cup todislodge and release dust anddebris. (fig. 6)I mportant: If the Dust Cup Doordoes not swing open after pressing the release button, push thedoor open using the bottom doortabs.4 Snap the door back in place.2 Press down on the dust cuprelease button (fig. 5) and pull outthe dust cup.6TOLL FREE: 1-800-798-73985 If you notice hair or other debriswrapped around the metal screenin the upper chamber of thedust cup, press the upper dustcup door release to open thetop of the dust cup. Lift out themetal screen, clear any debris andreplace. Snap the door back intoplace. (fig. 7)6 Replace the dust cup by firstseating the lower part of the dustcup, then pushing in the top partuntil it clicks. (fig. 8)CLEANING THE FILTERYour vacuum has a high efficiencydust cup to maintain strong suction bypreventing debris from collecting onthe filter. To maintain strong suction,it is important to clean the foam filterevery month, under normal use.1T urn off the vacuum and removethe dust cup.2 Remove the foam filter (fig. 9) andrinse under water until the waterruns clear. (fig. 10) Squeeze theexcess water out of the filter andlet it air dry for 24 hours beforereplacing. DO NOT use a hair dryer orother forced hot air to dry thefilter. DO NOT operate the vacuumwithout the filter in place. DO NOT operate the vacuumwith a wet filter.motorized brush, in the air inlet ofthe dustcup or wrapped around thebrush roll. These areas must be freefrom debris for maximum cleaningperformance. To clear blockages andclean the brush roll:1 Ensure the vacuum is off.NOTE: It is normal for your foam filterto discolor over time; it will notaffect the filter performance.2 Press the release button locatedon the rear of the main body andremove the motorized brush.(fig. 11)CLEANING THE MOTORIZEDBRUSH AND CLEARINGBLOCKAGES3 To clear the air hose, flip backthe connector to straighten theair passage (fig. 12) and carefullyremove any debris lodged in theair hose. DO NOT USE SCISSORSOR OTHER SHARP OBJECTS ASTHESE MAY DAMAGE THE HOSE.An accumulation of hair, string, andother debris may sometimes becomelodged in the flexible air hose of thewww.sharkclean.com7
CARE AND MAINTENANCE - cont.TROUBLESHOOTING GUIDE & REPLACEMENT PARTSPROBLEMSUGGESTED SOLUTIONVacuum will not operate1 The battery may be depleted. Charge the vacuum until the complete ovalaround the power button is illuminated, indicating a complete charge.2 See “Restarting after a jam” on page 8.Charging indicator does notilluminate1 Check to see if the charge adapter is plugged in properly to the outlet and tothe charge stand.2 Ensure that the vacuum is properly seated in the charging base.fig. 13fig. 15fig. 143 Ensure there is no debris accumulated on the metal charge contacts on theback of the nozzle and on the charge base.4 Ensure that the electrical outlet is supplying power to the charger. Check thefuse/breaker.Motorized brush will not workfig. 17b1 See “Cleaning the Motorized Brush and Clearing Blockages” on page 7 and“Restarting after a jam” on page 8.2 Ensure that the motorized brush is properly attached.Vacuum will not pick up or suctionpower is weakfig. 16fig. 17a4 Inspect the rotating brush fora build-up of debris. Removeanything wound around thebrush by carefully cutting itwith scissors. The brush roll isequipped with a raised cuttingguide to make inserting scissorseasier. Avoid damaging or cuttingthe bristles. (fig. 13)5 Use a flashlight to inspect insidethe air duct at the bottom of themain body and remove any debrisor blockages that may be there.Reattach the motorized brush,ensuring it clicks into place.fig. 18BRUSH BAR REMOVALBRUSH BAR INSERTION1 For easier cleaning, the brush rollcan be removed from the nozzle.Using a coin, turn the dial next tothe brush roll access door to theunlock position. (fig. 14) Removethe brush roll access door.(fig. 15)1 To reinsert the brush roll, first slipthe black belt onto the white gear(fig. 17a), then align the whitesquare on the opposite side ofthe brush roll into the square slot.(fig. 17b)2 Slip the black belt off of the whitegear and lift out the brush roll.(fig. 16)6 Remove the dust cup and use theflashlight to check the air pathon the spine of the vacuum andremove any debris or blockages.Then replace the dust cup.2 Align the white square on the beltside and position into its slot.(fig. 18)3 Replace the door, inserting thewheel side first. Use a coin tomove the dial to the lock position.For any other servicing, call Customer Support at 1-800-798-7398or visit www.sharkclean.com8TOLL FREE: 1-800-798-73984 Ensure that the motorized brush is properly attached.Dust escapes from vacuum3 Turn the power on and the unitshould operate normally.1 Empty the dust cup container.2 Ensure that the filter is inserted completely into its holder belowthe dust cup.3 Check for punctures in dust cup filter or cracks in the dust cup and replace.Vacuum turns off on its ownRun time has decreased over timeIf the indicator light around the powerbutton flashes, the brush bar hasjammed and will cease to operate.2 Ensure that nothing is blockingthe motorized brush or wrappedaround the brush bar.2 Remove the dust cup filter, check for blockages and remove. Clean orreplace the dust cup filter (See “Replacement Parts” below). Note: It isimportant to clean the dust cup filter every month.3 The battery may need to be charged, charge until the complete oval aroundthe power button is illuminated.RESTARTING AFTER A JAM1 Turn the unit off and allow it tocool down for 10 seconds.1 Empty the dust cup container.1 Charge the unit until the complete oval around the power button isilluminated.1 Perform the following steps:aCharge the vacuum for a minimum of 7 hours.bRun the vacuum until it turns itself off.cCharge the vacuum for a minimum of 7 hours.REPLACEMENT PARTSA XA1106Charging AdapterB XBT1106Battery packC XF1100Filters (2)www.sharkclean.com9
NOTESWARRANTY & PRODUCT REGISTRATIONEURO-PRO ONE-YEAR (1) LIMITED WARRANTYEURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a periodof one (1) year from the date of the original purchase, when utilized for normal household use, subject to thefollowing conditions, exclusions and exceptions.If your appliance fails to operate properly while in use under normal household conditions within the warrantyperiod, return the complete appliance and accessories, freight prepaid to: U.S.: EURO-PRO Operating LLCFor customer service support call 1-800-798-7398or visit www.sharkclean.com Canada: EURO-PRO Operating LLC4400 Bois Franc, St. Laurent, Québec H4S 1A7If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair orreplace it free of charge. Proof of purchase date and 13.95 to cover the cost of return shipping and handling mustbe included.*Non-durable parts including, without limitation, filters, brushes and electrical parts which normally requirereplacement are specifically excluded from warranty.The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at ouroption. This warranty does not cover normal wear of parts and does not apply to any unit that has been tamperedwith or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse,negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not coverdamage or defects caused by or resulting from damages from shipping or repairs, service or alterations to theproduct or any of its parts, which have been performed by a repair person not authorized by EURO-PRO OperatingLLC.This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventionalwarranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expresslyassumed by it under the terms of the limited warranty. In no event is EURO-PRO Operating LLC liable for incidentalor consequential damages of any nature whatsoever. Some states do not permit the exclusion or limitation ofincidental or consequential damages, so the above may not apply to you.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state orprovince to province.* IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase dateand to attach tag to item before packing with your name, complete address and phone number witha note giving purchase information, model number and what you believe is the problem with item. Werecommend you insure the package (as damage in shipping is not covered by your warranty). Mark theoutside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve ourproducts, therefore the specifications contained herein are subject to change without notice.PRODUCT REGISTRATIONPlease visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark product within ten (10) days ofpurchase. You will be asked to provide the store name, date of purchase and model number along with your name andaddress.The registration will enable us to contact you in the unlikely event of a product safety notification. By registeringyou acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanyinginstructions.10TOLL FREE: 1-800-798-7398www.sharkclean.com11
Copyright 2012 Euro-Pro Operating LLCUSA: Newton, MA 02459CANADA: Ville St-Laurent, QC H4S 1A7Printed in ChinaIllustrations may differ from actual product.SV1106.40 120822www.sharkclean.com1-800-798-7398
2 toll free: 1-800-798-7398 www.sharkclean.com 3 warnings when using your shark cordless vacuum, basic safety precautions should always be followed, including the following: read all instructions before using your shark cordless vacuum. important safety instructions for household use only save these instructions general electrical safety:
