Transcription
Quick Reference Product Guide
The Logical Choice for Hydraulic Tube Fittings and AdaptersQuick Guide IndexParts Nomenclature / Glossary of Descriptions. 1O-Ring Face Seal Fittings. 2Tube Fittings & Adapters.3 - 6Hydraulic Flanges / Accessories.6 - 7Flareless Bite Type Fittings. 8Instrumentation.8 - 9Conversion Adapters.9 - 10Metric Bite Type. 11NWD. 12Push to Connect.12 - 14Test Points. 14Thread Charts JIC – SAE Metric/InternationalDash Size2345678101214162024324048Tube ose I.D.1/83/161/45/163/81/25/83/411¼1½22½3JIC 37-Flare Thread5/16 - 243/8 - 247/16 - 201/2 - 209/16 - 183/4 - 167/8 - 1411/16 - 1213/16 - 1215/16 - 1215/8 - 1217/8 - 122½ - 12SAE O-Ring Thread5/16 - 243/8 - 247/16 - 201/2 - 209/16 - 183/4 - 167/8 - 1411/16 - 1213/16 - 121 5/16 - 121 5/8 - 1217/8 - 122½ - 12NPTF Pipe Thread1/8 - 271/4 - 183/8 - 181/2 - 143/4 - 141 - 11½1¼ - 11½1½ - 11½2 - 11½NPSM Swivel Thread1/8 - 271/4 - 183/8 - 181/2 - 143/4 - 141 - 11½1¼ - 11½1½ - 11½2 - 11½Flat Face Thread9/16 - 1811/16 - 1613/18 - 1217/16 - 12111/16 - 122 - 1213/16 - 161 - 14Code 61 Flange Head O.D.1.191.501.752.002.382.81Code 62 Flange Head O.D.1.251.621.882.122.503.121/2 - 143/4 - 141 - 111¼ - 111½ - 11British Thread BSPP/BSPT 1/8 - 281/4 - 193/8 - 19Brake Thread7/16 - 2417/32 - 24SAE 45-Flare Thread5/16 - 243/8 - 247/16 - 201/2 - 205/8 - 18Inverted Flare Thread5/16 - 283/8 - 247/16 - 241/2 - 20Compression Thread5/16 - 243/8 - 247/16 - 201012M 10x1.0M 12x1.53 - 12 3½ - 122½ - 83-83.314.00Copper Nylon AirMetric Thread11/16 - 2013/16 - 181 - 1811/16 - 243/4 - 167/8 - 1411/16 - 145/8 - 1811/16 - 183/4 - 187/8 - 1811/16 - 161/2 - 209/16 - 183/4 - 161-1 1/1 - 1215/16 - 1215/ - 1217/8 - 122½ - 1214161820222426273033364248M 14x1.5M 16x1.5M 18x1.5M 20x1.5M 22x1.5M 24x1.5M 26x1.5M 27x2.0M 30x2.0M 33x2.0M 36x2.0M 42x2.0M 48x2.0
5.7107International1.888.331.1523Parts NomenclatureBrennan Industries, Inc.’s hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material andtype of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products,add the suffix SS, and if you are ordering brass products, add the suffix B. Standard steel shapes such as 90 , 45 , tees and crosses are produced asa forging as well as fitting components brazed together. If you require forged one-piece construction parts, order the part number with the FG suffix.All stainless steel and brass shapes are forged one-piece construction and therefore do not require the FG suffix. Metric Bite Type Fittings are calledout by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e.30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.2501-08-08-SSThis is a 2501 Series with a 1/2” male JIC tubeand a 1/2” male pipe thread. The part numberalso indicates that the product is made ofstainless steel.2501-12-08-FGThis is a 2501 Series with a 3/4” male JIC tubeand a 1/2” male pipe thread. The part numberalso indicates that the product was produced asa forged one-piece construction, steel adapter.2501-04-04-BThis is a 2501 Series with a 1/4” male JIC tubeand a 1/4” male pipe thread. The part numberalso indicates that the product is made ofbrass.FP: Female PipeFPS: Female Pipe SwivelFS: Face SealFSAES: Female SAE Swivel, 45 SeatH: Hollow Hex O-ring PlugHB: Hose BarbHP: Hollow Hex Pipe PlugI.D.: Inside DimensionJIC: Joint Industrial Council, 37 FlareJIS: Japanese Industrial Standard, 30 FlareL: Light (7005-04-L06-12)L: Long (6400-L-20-20-O)LGTH: LengthLH: Large HexLL: Extra Long DropLLL: Extra Extra LongLLLL: Extra Extra Extra LongMAORB: Male Adjustable O-ring Boss (NWO)MBT: Metric Bite TypeMBSPP: Male British Standard Pipe ParallelMBSPPADJ: Male British Standard PipeParallel AdjustableMBSPPAORB: Male British Standard PipeParallel Adjustable O-ring BossMBSPT: Male British Standard Pipe TaperedMFS: Male Face SealMIFS: Male Inverted Flare SwivelMJ: Male J.I.C.MJIS: Male J.I.S.MKOM: Male KomatsuM.M.: MillimetersMM: Male MetricMMADJ: Male Metric AdjustableMMAORB: Male Metric Adjustable O-ringBoss use with ISO 6149MMORR: Male Metric O-Ring andRetaining RingMORB: Male O-ring BossMP: Male PipeMS: Metric SwivelN: Used as prefix for Instrumentation fittingsseries (N2404-04-04-SS)N: Extended Length (5404-N-02x0.750)N: Locknut for NWO Assembly (0306-N-03)NBR: Assembled with Nut and Bite RingNPSM: American (formerly National) PipeStraight MechanicalNPTF: American (formerly National) PipeTaper FuelNWO: Nut Washer O-ring (MAORB)O: O-RingO.D.: Outside DimensionORB: O-Ring BossPC DOT: SAE DOT Push to Connect Fittingsfor Vehicle ApplicationsPCNY: Push to Connect Nylon FittingsPCNB: Push to Connect Nickel-PlatedBrass FittingsPL: Push LockPLATE MAX: Recommended Maximum PlateThickness After Assembling theBulkhead with the 306 Locknut,318 Nut & 319 SleeveP: PlugS: Heavy (7005-04-S06-14)S: SteelSAE: Society of Automotive EngineeringSHP: Square Head PlugSS: Stainless SteelTS: Tube SpudV: Versa FlareY FLATS: Width Across the Wrench FlatsGlossary of DescriptionsAORB: Adjustable O-ring Boss (NWO)B: BrassBHLN: Bulk Head Lock NutBSPP: British Standard Pipe Parallel (G Thread)BSPPS: British Standard Pipe Parallel SwivelBSPT: British Standard Pipe Taper (R Thread)BT: Bite TypeBT: Bored Through Connector inDouble Ferrule SeriesBTS: Bite Type SwivelBULN: Back-up Lock Nut (NWO)BW: Butt WeldC: (before number) Bite TypeC: (after number) CapCOR: Captive O-Ring (Style DIN 3852, Form E)C HEX: Width Across the WrenchD: AluminumDKO: 24 Sealing Cone (Female Swivel)with O-RingE: Extra Light (Metric Fittings)F: (before number) Flare-OFBSPP: Female British Standard Pipe ParallelFBSPT: Female British Standard Pipe TaperedFBSPPS: Female British StandardPipe Parallel SwivelFFS: Female Face SealFFSS: Female Face Seal SwivelFG: Forged Flats of the HexFIF: Female Inverted FlareFJ: Female J.I.C.FJIS: Female J.I.S.FJS: Female J.I.C. SwivelFK: Female KomatsuFMS: Female Metric SwivelFO: Flare-OFORB: Female O-ring Boss1
The Logical Choice for Hydraulic Tube Fittings and AdaptersO-Ring Face Seal 0304-CCap Assembly InsertFS0306Bulkhead Lock NutFS0318NutFS0319SleeveFS0403Bore-MFS StraightFS1700 MFS-FlangeStraight Code 61FS1703 MFS-Flange45 Code 61(520101)FS1704 MFS-Flange90 Code 61FS2404MFS-MP StraightFS1800 MFS-FlangeStraight Code 62FS2406 FFS-MFSTube End Reducer(520401)FS2603MFS-MFS-MFS TeeFS2605MFS-MP-MFS Tee(520201)(J515 Type CH)FS2704* MFS-MFSMFS Bulkhead TeeFS4000Buna O-RingFS1803 MFS-Flange45 Code 62FS1804 MFS-Flange90 Code 62FS1805 MFS-MFSFlange Tee Code 62FS1806 MFS-MFSFlange Tee Code 62FS2403MFS-MFS Straight(520109)(520201)FS2408MFS PlugFS2500MFS-MFS 90 FS2501MFS-MP 90 FS2503MFS-MP 45 FS2601MFS-MFS-MP Tee(520501)(520601)(520701)(520801)FS2650 MFS-MFSMFS-MFS CrossFS2700* MFS-MFSBulkhead UnionFS2701* MFS-MFSBulkhead 90 FS2702* MFS-MFSBulkhead 45 (520120)(520122)FS2703* MFS-MFSMFS Bulkhead TeeFS4001Viton O-RingFS6001Sliver Braze RingFS6400-OMFS-MORB StraightFS6400-L-O MFSMORB Straight LongFS6402MFS-FJS StraightFS6600 MFS-MFSFFSS Branch Tee(520221)FS6403MFS-MJ StraightFS6500MFS-FFSS 90 FS6503FP-FFSS 90 FS6504FFSS-MJ StraightFS6505MP-FFSS StraightFS6540FFSS-MORB 20281)FS6602 MFS-FFSSMFS Run TeeFS6801-NWOMFS-MAORB 90 FS6802-NWOMFS-MAORB 45 FS6803-NWOMFS-MFS-MAORB TeeFS6804-NWOMFS-MAORB-MFS TeeFS6809-NWOFFSS-MAORB 90 FS7202-NWO-FGMFS-MBSPP 45 (520112)(520112)FS7205 MFSMMAORB 90 -0FS0304-CMFS-MFS-MMAORB Tee MFS-MMAORB-MFS Tee MFS-MMAORB 45 Elbow MFS-MMORB ISO 6149 Cap Assembly Insert* Insert “-LN” in part number to include lock nut when ordering bulkhead fittings. Example: FS2700-LN-04-04.2FS0304-CCap Assembly Insert
5.7107International1.888.331.1523Tube Fittings & Adapters(070111)(070112)(070118/MS #51860)(070117)(070110)(070115)0302Short Nut0304Standard Nut0304-CJIC Cap Nut0306BHLN0306-NBULN0318JIC Tube Nut0319JIC Tube Sleeve0403Bore-MJ Straight0403-TSMJ Tube Spud0404Bore-MP Straight0405Bore-FP Straight0406 Bore-MJBulkhead Straight0500Bore-MJ 90 0501Bore-MP 90 0600Bore-Bore-MJ Tee0601Bore-Bore-MP Tee0602Bore-Bore-FP0702Bore-MJ-MJ Tee0800Bore-FPS Straight0801Bore-FPS 90 0900Bore-FJS 40331)1404MP-FPS Straight1405FP-FPS Straight1501MP-FPS 90 1502FP-FPS 90 1503MP-FPS 90 1504FP-FPS 45 1501-LMP-FPS 90 LongBrass(PL Push Lock) Brass1601MP-FPS-FPS Tee1602FP-FPS-FPS TeeBrass1603FPS-FPS-FPS TeeBrass1604MP-FPS-FPS-FPS CrossBrassBrass2114PL-FIF Straight2115PL-MIFS Straight2116PL-MSAE MS#51500)2403MJ-MJ Straight2403-LHMJ-MJ Straight Large Hex2404MJ-MP MS#51504)2408MJ Plug2500MJ-MJ 90 2501MJ-MP 90 2111PL-FJS Straight2117PL-Stem Straight2112PL-FSAES StraightBrass2118PL-PL StraightBrass2113PL-MP StraightBrass2119PL-FP StraightBrass2120PL-MP 90 Elbow(070103/MS#51503)2404-LMJ-MP Straight Long2501-LMJ-MP 90 Long2404-LL2405MJ-MP Straight X-Long MJ-FP Straight2406FJ-MJ Straight MP 90 X-Long2501-LLLMJ-MP 90 XX-Long2502MJ-FP 90 3
The Logical Choice for Hydraulic Tube Fittings and AdaptersTube Fittings & Adapters continued(070302/MS#51508)2503MJ-MP 45 0)(070424/MS#51511)2504MJ-MJ 45 2505MJ-FP 45 2601MJ-MJ-MP Tee2602MJ-MJ-FP Tee2603MJ-MJ-MJ Tee2605MJ-MP-MJ Tee2607MJ-MP-MP Tee2608MJ-FP-MP Tee2609MJ-FP-FP Tee2610MP-MP-MJ Tee2611MJ-MP-FP Tee2612FP-FP-MJ Tee(070426/MS#51514)2606MJ-FP-MJ Tee(070601/MS#51520)2613MP-FP-MJ Tee2650MJ-MJ-MJ-MJ Cross2651MJ-MP-MJ-MJ Cross2652MJ-MJ-MJ-FP #51515)(070958/MS#51516)2701MJ-MJ Bulkhead 90 2702MJ-MJ Bulkhead 45 2703 MJ-MJ-MJBulkhead Branch Tee2653MJ-MJ-MP-MP Cross2654MJ-MP-MJ-MP Cross2700MJ-MJ Bulkhead Straight2704 MJ-MJ-MJBulkhead Run Tee2705 FP-MJBulkhead Straight2706 MP-MJBulkhead Straight3051MP-FP Low Profile 90 4005Flange O-Ring4404HB-MP Straight4501HB-MP 90 4503HB-MP 45 (J515 Type I CH/MS#28778) (J515 Type I I I H K)3474-NWOMAORB-ORB Straight4000Buna O-Ring4001Viton O-Ring(140138)4504HB-HB-HB Tee4505HB-MP-HB Tee(140137)45404MP-MP Hex Nipple5404-N MP-MPStraight Nipple Long(130109A)(140237)5406-SHPSquare Head Pipe Plug5500MP-MP 90 Elbow4506HB-HB-MP Tee4601-NWOHB-MAORB 90 (140139)(140140)54055406MP-FP Straight Expander MP-FP Reducer Bushing5501MP-MP 45 4603-NWOHB-MAORB 45 4604-OHB-MORB Straight5000FP-FP Straight(130109E)5406-CPipe Cap5406-HPHollow Hex Pipe Plug5406-PExternal Hex Pipe Plug(140239)(140339)(140238)(140338)5502MP-FP 90 Street Elbow5503MP-FP 45 Street Elbow5504FP-FP 90 Elbow5505FP-FP 45 Elbow
5.7107International1.888.331.1523Tube Fittings & Adapters 140438)(140537)5600MP-MP-MP Tee5601MP-MP-FP Tee5602MP-FP-FP Street Tee5603MP-FP-MP Tee5604FP-FP-MP-Branch Tee5605FP-FP-FP Tee5650MP-MP-MP-MP Cross5652FP-FP-FP-FP Cross5653MP-MP-FP-FP Cross5655MP-FP-FP-FP Cross5700MP-MPS 90 5701MJ-MPS 90 5702FP-MPS 90 (070120/MS#51525)(070122/MS#51526)6000Back-Up Washer6400-OMJ-MORB Straight6400-L-O6401-OMJ-MORB Straight Long MORB-MP Straight6402-OMORB-FJS Straight6404FORB-MP Straight6405-OMORB-FP Straight(09
Brennan Industries, Inc.’s hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in six- teenths of an inch (example: 4/16 or 4). The standard product is produced in steel and requires no .
