Transcription
Thermoelectric AssembliesTECA SeriesAir to Air Thermoelectric Cooler AssembliesWakefield- Vette’s TECA series of Air to Air ThermoelectricCooler Assemblies are usually used to cool (or heat) objectsin enclosures. Heat is absorbed and dissipated by heatexchangers equipped with fans. To install, simply cut a hole,plug in the assembly and connect it to a power source. Ourcoolers are compact and dependable. All models areoptimized for ΔT and efficiency. A variety of voltageoptions from 12 to 48 volts and cooling capacity from 15watts to 200 watts are available, Typical applicationsinclude cooling electronics cabinets, analytical instruments,commercial refrigeration, food transportation boxes andsmall electronics enclosures.WV TRIC ASSY DIRECT-AIR to Air 12VTHERMOELECTRIC ASSY DIRECT-AIR to Air 24VHeat TransferTypeAir to AirAir to perationTemperature-20 to 60oC-20 to 60oCOutline (L/W/H)160mm x 122.4mm x 147mm160mm x 122.4mm x 147mmAir to Plate Thermoelectric Cooler AssembliesWakefield Vette’s Air to Plate Cooler Assemblies aretypically used in three key applications for cooling/heating: Objects directly on the cold plate, or objects on anadditional cold plate of your own design Enclosures by attaching a thermal conductive containerto the cold plate Liquids by attaching a thermal conductive tank orliquid heat sink to the cold plateThe heat is absorbed by the cold plate, pumped through theTE modules and then dissipated to the air by an air heatsink. Our coolers deliver compact and reliable cooling in arange from 42 to 80 watts. All models are optimized for avariety of voltages, ΔT and efficiency. Typical applicationsinclude cooling electronics, analytical instruments, lasersand commercial refrigerationWV TRIC ASSY DIRECT-AIR to Plate 12VTHERMOELECTRIC ASSY DIRECT-AIR 2 Plate 24VHeat Transfer Type Power Cooling CurrentAir to PlateAir to Plate40W80W3.9A4.2AVoltageOperation TemperatureOutline (L/W/H)12V24V-20 to 60oC-20 to 60oC120mm x 102mm x 80mm203mm x 155mm x 152mm
Thermoelectric Assembly Performance SpecificationsAir to Air Thermoelectric Cooler AssemblyTECA-AA-50-12The TECA-AA-50-12 Thermoelectric air conditioner is designedfor electronic cabinets and environmental chambers. It canmaintain ambient temperatures while removing up to 50W. Thismodel is powered by 12VDC. The TECA-AA-50-12 isessentially maintenance-free, with no filters to change, and it canbe mounted in any orientation, offering design flexibility withsolid-state reliability.Features: 50W Capacity at DT 0oC & Ambient Temperature 30oC Refrigerant Free – environmentally friendly Wide operating temperature range of -20oC to 60oC Shift between heating and cooling without using a separateheater Reduced noise and vibration from solid-state heat pumpApplications: Outdoor Enclosures Outdoor/Indoor Kiosks and Displays Food/Consumer Refrigerator Battery CabinetGeneral Specifications:P/NTECA-AA-50-12Cooling Method/Radiating MethodForced Air/Forced AirAmbient Temperature-20 to 60oCCooling Capacity/Input Power50W / 95WHeating Capacity135WFan Current0.4A (Radiator) / 0.3A (Cooling)TEC Nominal/Startup Current8.0A / 9.1ANominal/Maximum Voltage12/15 VDCOverall Dimension160mm x 122.4mm x 147mmWeight1.8kg (4 lbs)Lifetime 70,000 HoursCooling Performance Tolerance10%Wakefield-Vette reserves the right to change these specifications without notice1/2
Thermoelectric Assembly Performance SpecificationsAir to Air Thermoelectric Cooler AssemblyTECA-AA-50-12Heat Pumping (Watts)Performance Curve:Dimensions (mm):Installation and Connector (mm):Wakefield-Vette reserves the right to change these specifications without notice1/2
Thermoelectric Assembly Performance SpecificationsAir to Air Thermoelectric Cooler AssemblyTECA-AA-50-24The TECA-AA-50-24 Thermoelectric air conditioner isdesigned for electronic cabinets and environmental chambers. Itcan maintain ambient temperatures while removing up to 50W.This model is powered by 24VDC. The TECA-AA-50-24 isessentially maintenance-free,with no filters to change, and it can be mounted in anyorientation, offering design flexibility with solid-state reliability.Features: 50W Capacity at DT 0oC & Ambient Temperature 30oC Refrigerant Free – environmentally friendly Wide operating temperature range of -20oC to 60oC Shift between heating and cooling without using a separateheater Reduced noise and vibration from solid-state heat pumpApplications: Outdoor Enclosures Outdoor/Indoor Kiosks and Displays Food/Consumer Refrigerator Battery CabinetGeneral Specifications:P/NTECA-AA-50-12Cooling Method/Radiating MethodForced Air/Forced AirAmbient Temperature-20 to 60oCCooling Capacity/Input Power50W / 95WHeating Capacity135WFan Current0.25A (Radiator) / 0.18A (Cooling)TEC Nominal/Startup Current4.0A / 4.6ANominal/Maximum Voltage24/30 VDCOverall Dimension160mm x 122.4mm x 147mmWeight1.8kg (4 lbs)Lifetime 70,000 HoursCooling Performance Tolerance10%Wakefield-Vette reserves the right to change these specifications without notice1/2
Thermoelectric Assembly Performance SpecificationsAir to Air Thermoelectric Cooler AssemblyTECA-AA-50-24Heat Pumping (Watts)Performance Curve:Dimensions (mm):Installation and Connector (mm):Wakefield-Vette reserves the right to change these specifications without notice1/2
Thermoelectric Assembly Performance SpecificationsAir to Plate Thermoelectric Cooler AssemblyTECA-AP-40-12The TECA-AP-40-12 Thermoelectric plate cooler is designed forelectronic cabinets and environmental chambers. It can maintainambient temperatures while removing up to 40W. This model ispowered by 12VDC and is essentially maintenance-free, with nofilters to change. It can be mounted in any orientation, offeringdesign flexibility with solid-state reliability.Features: 40W Capacity at DT 0oC & Ambient Temperature 30oC Refrigerant Free – environmentally friendly Wide operating temperature range of -20oC to 60oC Shift between heating and cooling without using a separate heater Reduced noise and vibration from solid-state heat pumpApplications: Analytical Instruments Medical Diagnostic Equipment Industrial/Electronics Cooling Food and Beverage CoolingGeneral Specifications:P/NTECA-AP-40-12Cooling Method/Radiating MethodPlate/Forced AirAmbient Temperature-20 to 60oCCooling Capacity/Input Power40W / 50WHeating Capacity90WFan Current / Noise0.24A (Radiator) / 40 dB-ATEC Nominal/Startup Current3.9A / 5.0ANominal/Maximum Voltage12/15 VDCOverall Dimension120mm x 102mm x 80mmWeight0.8kg (1.8 lbs)Lifetime 70,000 HoursCooling Performance Tolerance10%Wakefield-Vette reserves the right to change these specifications without notice1/2
Thermoelectric Assembly Performance SpecificationsAir to Plate Thermoelectric Cooler AssemblyTECA-AP-40-12Heat Pumping (Watts)Performance Curve:Dimensions (mm):Installation and Connector (mm):Wakefield-Vette reserves the right to change these specifications without notice1/2
Thermoelectric Assembly Performance SpecificationsAir to Plate Thermoelectric Cooler AssemblyTECA-AP-80-24The TECA-AP-80-12 Thermoelectric plate cooler isdesigned for electronic cabinets and environmentalchambers. It can maintain ambient temperatures whileremoving up to 80W. This model is powered by 24VDC andis essentially maintenance-free, with no filters to change. Itcan be mounted in any orientation, offering designflexibility with solid-state reliability.Features: 80W Capacity at DT 0oC & Ambient Temperature 30oC Refrigerant Free – environmentally friendly Wide operating temperature range of -20oC to 60oC Shift between heating and cooling without using aseparate heater Reduced noise and vibration from solid-state heat pumpApplications: Analytical Instruments Medical Diagnostic Equipment Industrial/Electronics Cooling Food and Beverage CoolingGeneral Specifications:P/NTECA-AP-40-12Cooling Method/Radiating MethodPlate/Forced AirAmbient Temperature-20 to 60oCCooling Capacity/Input Power80W / 115WHeating Capacity190WFan Current / Noise0.35A (Radiator) / 45 dB-ATEC Nominal/Startup Current4.2A / 5.3ANominal/Maximum Voltage24/30 VDCOverall Dimension203mm x 155mm x 152mmWeight3.6kg (8 lbs)Lifetime 70,000 HoursCooling Performance Tolerance10%Wakefield-Vette reserves the right to change these specifications without notice1/2
Thermoelectric Assembly Performance SpecificationsAir to Plate Thermoelectric Cooler AssemblyTECA-AP-80-24Heat Pumping (Watts)Performance Curve:Dimensions (mm):Installation and Connector (mm):Wakefield-Vette reserves the right to change these specifications without notice1/2
TECA-AA-50-24 The TECA-AA-50-24 Thermoelectric air conditioner is designed for electronic cabinets and environmental chambers. It can maintain ambient temperatures while removing up to 50W. This model is powered by 24VDC. The TECA-AA-50-24 is essentially maintenance-free, with no filters to change, and it can be mounted in any
