Transcription
KEAPower entry modules without line filterhttps://www.schurter.com /PG05IEC Appliance Inlet C14 with Fuseholder 1- or 2-poleScrew-on mountingSnap-in versionFuse holder "Fingergrip" with voltage selectorC14See below:Approvals and Compliances70 CDescription- Panel mount :Screw-on version from front or rear side, snap-in version front side- 3 Functions :Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm1‑ or 2‑pole , with or without voltage selector (step switch)- V-Lock notch standard- Meets the requirements of IEC 60335-1 for appliances in unattendeduse. This includes the enhanced requirements of glow wire tests acc.to IEC 60695-2-11 or -12 &-13.- Quick connect terminals 4.8 x 0.8 mmUnique Selling Proposition-Characteristics- Available with or without internal connections- Plug removal necessary for fuse-link replacement- Suitable for use in equipment according to IEC/UL 62368-1Other versions on request- With solder terminals- Fuse drawer with other voltage values- For protection class IIReferencesAlternative: version with line filter KFAWeblinkspdf data sheet, html datasheet, General Product Information, Approvals,Distributor-Stock-Check, Accessories, Detailed request for productVery compact designComponents internally wiredIntegrated voltage selectorV-Lock cord retainingTechnical DataRatings IECRatings UL/CSADielectric StrengthAllowable Operation TemperatureIP-ProtectionProtection against electricshockTerminalPanel Thickness SMaterial: Housing10 A / 250 VAC; 50 Hz10 A / 250 VAC; 60 Hz 3 kVAC between L-N 4 kVAC between L/N-PE(1 min/50 Hz)-25 C to 70 CAppliance inlet/-outletfront side IP40 acc. to IEC 60529Suitable for appliances with protectionclass I acc. to IEC 61140Quick connect terminals 4.8 x 0.8 mmScrew: max 8 mmMounting screw torque max 0.5 NmSnap-in: 1.5/2/2.5 mmThermoplastic, black, UL 94V-0Rated Power Acceptance @Ta 23 CPower Acceptance @ Ta 23 CFuseholderVoltage SelectorC14 / C18 acc. to IEC 60320-1,UL 498, CSA C22.2 no. 42 (for coldconditions) pin-temperature 70 C, 10 A,Protection Class I1-/2-pole, Shocksafe category PC2acc. to IEC 60127-6,for fuse-links 5 x 20 mm5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) perpoleAdmissible power acceptance at higherambient temperature see derating curvesoptional, step, 2-4 digitsApprovals and CompliancesDetailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details aboutApprovalsSCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to nationaland international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.Connectors1
KEAPower entry modules without line filterhttps://www.schurter.com /PG05ApprovalsThe approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.Approval Reference Type: KEAApproval LogoCertificatesCertification BodyDescriptionVDE ApprovalsVDECertificate Number: 40046508UL ApprovalsULUL File Number: E93617CCC ApprovalsCCCCCC Certificate Number: 2017180204004083DesignStandardDescriptionDesigned according toIEC 60320-1Appliance couplers for household and similar general purposesDesigned according toIEC 60127-6Miniature fuses. Part 6. Fuse-holders for miniature fuse-linksDesigned according toUL 498Standard for Attachment Plugs and ReceptaclesDesigned according toCSA C22.2 no. 42General Use Receptacles, Attachment Plugs, and Similar Wiring DevicesDesignStandardDescriptionDesigned for applications acc.IEC/UL 62368-1Audio/video, information and communication technology equipment - Part1: Safety requirementsDesigned for applications acc.IEC 60601-1Medical electrical equipment - Part 1: General requirements for basicsafety and essential performanceDesigned for applications acc.IEC 60335-1Safety of electrical appliances for household and similar purposes. Meetsthe requirements for appliances in unattended use. This includes theenhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12& -13.DetailsInitiatorDescriptionCE declaration of conformitySCHURTER AGThe CE marking declares that the product complies with the applicablerequirements laid down in the harmonisation of Community legislation onits affixing in accordance with EU Regulation 765/2008.UKCA declaration of conformitySCHURTER AGThe UKCA marking declares that the product complies with the applicablerequirements laid down in the British Amendment of Regulation (EC)765/2008.RoHSSCHURTER AGDirective RoHS 2011/65/EU, Amendment (EU) 2015/863China RoHSSCHURTER AGThe law SJ / T 11363-2006 (China RoHS) has been in force since 1 March2007. It is similar to the EU directive RoHS.REACHSCHURTER AGOn 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as"REACH") entered into force.SCHURTER AGV-Lock system are based on a matching plug-dose combination. Theconnector is equipped with a notch intended for use with the latchingcordset. The cord latching system prevents against accidental removal ofthe cordset.White Paper Glow wire testSCHURTER AGMeets the requirements of IEC 60335-1 for appliances in unattended use.This includes the enhanced requirements of glow wire tests acc. to IEC60695-2-11 or -12 &-13.Medical EquipmentSCHURTER AGSuitable for use in medical equipment according to IEC/UL 60601-1 (1MOOP, 1 MOPP)Product standardsProduct standards that are referencedOrganizationApplication standardsApplication standards where the product can be usedOrganizationCompliancesThe product complies with following Guide LinesIdentification2Connectors
KEAPower entry modules without line filterhttps://www.schurter.com /PG05Dimensions [mm]Screw-on mounting type KEAø 3.341.627.7182.22ø 6.3x90 4.8x0.827.336 0.1R2.63431.3R631.6 0.1230R4M3/ø3.63627.6 0.1R2.4 0.14441.627.7S 0.1182.22Snap-in mounting type KEA4.8x0.827.3R2.63431.331.6 0.1230R430R2.4 0.127.6 0.1Connectors3
KEAPower entry modules without line filterhttps://www.schurter.com /PG05Diagramswithout conn.Voltage Selector4-positions, 1-polewithout conn.Voltage Selector4-positions, 2-pole4 3 21ALNwith internal connectionsVoltage Selector3-positions, 1-pole4 3 215ALBN3 213 21LEVoltage Selector2 pos.2-pole3 1N55LEEVoltage Selector2 pos.1-pole3 1with internal connectionsVoltage Selector3-positions, 2-poleNEwithout voltage selector1-pole3without voltage selector2-pole35Derating Curves1-pole2-pole1.5I 1.0 InI 0.7 In1.0I In0.50.00204060801.6Admissible power acceptance inWatt per poleAdmissible power acceptance inWatt2.0100Ambient air temperature Ta C1.41.2I 1.0 In1.00.8I 0.7 In0.6I In0.40.20.0020406080100Ambient air temperature Ta CAll VariantsTypePanel mountingPanel Thicknesss [mm]FuseholderVoltage SelectorInternally ole-Order Number ap-in2.51-pole-4301.2024KEASnap-in1.51-pole2 pos.4301.2142KEASnap-in21-pole2 pos.4301.2143KEASnap-in1.51-pole3 pos.l4301.0022KEASnap-in21-pole3 pos.l4301.0023KEASnap-in2.51-pole3 pos.l4301.0024KEASnap-in1.51-pole3/4 digits4301.2062KEASnap-in21-pole3/4 digits4301.2063KEASnap-in2.51-pole3/4 digits4301.2064KEASnap-in1.52-pole-l4301.0502 KEASnap-in22-pole-l4301.0503 KEASnap-in2.52-pole-l4301.0504 1.2003KEASnap-in2.52-pole-4301.20044Connectors
KEAPower entry modules without line filterhttps://www.schurter.com /PG05TypePanel mountingPanel Thicknesss [mm]FuseholderVoltage SelectorKEASnap-in1.52-pole2 pos.4301.2122KEASnap-in22-pole2 pos.4301.2123KEASnap-in2.52-pole2 pos.KEASnap-in1.52-pole3 pos.Internally wiredOrder Number4301.2124l4301.0002KEASnap-in22-pole3 pos.l4301.0003KEASnap-in2.52-pole3 pos.l4301.0004KEASnap-in1.52-pole3/4 digits4301.2042KEASnap-in22-pole3/4 digits4301.2043KEASnap-in2.52-pole3/4 ole2 pos.KEAScrew-1-pole3 pos.KEAScrew-1-pole3/4 ole2 pos.KEAScrew-2-pole3 pos.KEAScrew-2-pole3/4 digits4301.2044l 4301.05214301.20214301.2141ll4301.00214301.2061 4301.0501 4301.20014301.2121l4301.0001 4301.2041 Most Popular.Availability for all products can be searched Stock-Check-SCHURTERThe fuse drawer is not included and must be ordered separately (see required accessory).Packaging unit50 PcsRequired AccessoryDescriptionFusedrawer 2Fusedrawer for Fuse Links 5x20 mm, with or without Voltage Selector InsertFingergrip-Safe, 2-pole3-104-672Fingergrip, 2-pole, Voltage Selector, 110, 150, 2204301.1014.01Fingergrip, 2-pole, Voltage Selector, 120, 2404301.1014.02Fingergrip, 2-pole, Voltage Selector, 110, 2204301.1014.03.AccessoriesWire HarnessWire harness for SCHURTER productsAssorted CoversRear Cover0859.0047Connectors5
KEAPower entry modules without line filterhttps://www.schurter.com /PG05RC320Rear Cover for Power Entry ModuleCord retaining kitsCord retaining strain reliefFlat head, A4700.0001Countersunk, B4700.0002Mating Outlets/ConnectorsCategory / DescriptionAppliance Outlet Overview complete4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I47874788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances withprotection class I4788IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal5091Connector Overview complete4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C1347824785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C1347854300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C134300-064781 Mounting: Power Cord, Cable, Connector: IEC C1547814784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C154784.Mating Outlets/Connectors shutteredConnector Overview complete4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C134783Power Cord Overview completeVAC13KSVAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / whiteVAC17KS08.12.2021VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black6ConnectorsThe specifications, descriptions and illustrations indicated in this document are based on currentinformation. All content is subject to modifications and amendments. Information furnished is believedto be accurate and reliable. However, users should independently evaluate the suitability and test eachproduct selected for their own applications.
1 Power entry modules without line filter KEA https://www.schurter.com /PG05 Connectors IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole Screw-on mounting Snap-in version Fuse holder "Fingergrip" with voltage selector
