Transcription
Dialight LED Lighting Catalogue - EMEAfor Industrial and Hazardous AreasOCTOBER 2021
Maintenance Comparison10 yearsTypicalnon-DialightLED productHigh PressureSodiumFluorescentMetal Halide2www.dialight.com
BeforeAfterAbout DialightWith over 40 years of industrial LED lighting experience and the largest installed base in the world, Dialight’sextensive network of support staff, distributor and channel partners are ready to help you select among ourwide range of products to identify a lighting solution that meets your specific needs.Reliant LED lighting for light industrial applications10 year warrantyVigilant LED lighting for general industrial applications10 year warrantyDuroSite LED lighting for general industrial applications5 & 10 year warrantySafeSite LED lighting for hazardous applications5 & 10 year warrantywww.dialight.com3
Hazardous Area RatingsFixed and portable fixtures for installation and use in hazardous areas.ZonesThe zone defines the probability of hazardous material being present in an explosive concentration in the atmosphere.ZoneHazardous Material in Surrounding AtmosphereZone 0, 20Area in which an explosive gas / dust mixture is continuously present or present for long periodsZone 1, 21Area in which an explosive gas / dust mixture is likely to occur for short periods in normal operationZone 2, 22Area in which an explosive gas / dust mixture is present for a very short time due to an abnormal conditionProtection TypesThe protection types are used to denote the protection concept utilised in the devices.ExPresence of Hazardous MaterialZonesEx dFlameproof (Explosion proof) Enclosure1, 21, 2, 22Ex eIncreased Safety1, 21, 2, 22Ex mEncapsulation1, 21, 2, 22Ex n or NNon incendive or/and normally no sparking circuits2, 22Temperature RatingsCertified equipment is tested for maximum temperature rating by approval agencies.Equipment for Group II receives a temperature code indicating the maximum temperatures of the product.Temperature RatingT1450 CT2300 CT3200 CT4135 CT5100 CT685 CGroups (Gas & Dust)Equipment is tested for suitability in specified gas groups and dust groups.Gas groups IIA, IIB, IIC. Dust groups IIIA, IIIB, IIICGroup4Hazardous Material in Surrounding AtmosphereGroup IIAPropane groupGroup IIBEthylene groupGroup IICHydrogen groupGroup IIIACombustible flyingsGroup IIIBNon-conductive dustGroup IIICConductive dust
Table of ContentsProSite LED Lighting for Industrial & Hazardous ApplicationsProSite LED Floodlight12-15Reliant LED Lighting for Industrial ApplicationsReliant LED High Bay16-19Vigilant LED Lighting for Industrial ApplicationsVigilant Ultra-Efficient LED High BayVigilant LED High BayVigilant LED High Output High BayVigilant LED High Output High Bay - DALIVigilant LED High Output High Bay - Low ProfileVigilant LED Dual FloodlightVigilant LED Area LightVigilant LED Conveyor LightVigilant LED -43DuroSite LED Lighting for Industrial ApplicationsDuroSite LED FloodlightDuroSite LED Stainless Steel Linear, Emergency Model44-4546-47SafeSite LED Lighting for Hazardous ApplicationsSafeSite LED High BaySafeSite LED GRP LinearSafeSite LED Stainless Steel Linear, Emergency ModelSafeSite LED Area Light48-4950-5354-5556-57SafeSite LED Transportable Lightingfor Hazardous ApplicationsSafeSite LED Transportable Bulkhead58StreetSense LED Fixture for Infrastructure SolutionsStreetSense LED Street Light - ATEX, IECEx59-60Obstruction LED LightingICAO61-625
Overview Industrial ApplicationsProSite LED Lighting Fixturesfor Industrial & Hazardous ApplicationsLED FloodlightWattage Range: 81-499WLumen Output Range:12,200-65,000Lumens per Watt:Up to 163Input Voltage: 120-277 VAC / 120-250 VDC, 347-415 VACMounting:Structure, PoleMounting Height:Up to 30mReliant LED Lighting Fixturesfor Industrial ApplicationsLED High BayWattage Range: 71-232WLumen Output Range:10,600-33,800Lumens per Watt:Up to 149Input Voltage: 100-277 VAC 50/60HzMounting:OverheadMounting Height:Up to 12mVigilant LED Lighting Fixturesfor Industrial ApplicationsLED High BayWattage Range: 80-186WLumen Output Range:11,000-41,300Lumens per Watt:Up to 200Input Voltage: 100-277 VAC, 120-250 VDCMounting:Overhead, Ceiling, SuspendedMounting Height:Up to 18mLED High Output High Bay & Low ProfileWattage Range: 300-485WLumen Output Range:Up to 72,000Lumens per Watt:Up to 155Input Voltage: 120-277 VACMounting:SuspendedMounting Height:Up to 30mDISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.6www.dialight.com
Overview Industrial ApplicationsVigilant LED Lighting Fixturesfor Industrial ApplicationsLED Dual FloodlightWattage Range: 385WLumen Output Range:54,000-56,000Lumens per Watt:Up to 145Input Voltage: 100-277 VAC, 120-250 VDCMounting:Structure, PoleMounting Height:Up to 25mLED Area LightWattage Range: 40-66WLumen Output Range:5,500-9,000Lumens per Watt:Up to 143Input Voltage: 100-277 VAC, 120-250 VDCMounting:Ceiling, Wall, PoleMounting Height:Up to 10mLED Conveyor LightWattage:64WLumen Output: 6,700Lumens per Watt:Up to 106Input Voltage:100-277VAC, 120-250 VDCMounting:34mm pole mountMounting Height:Up to 6mLED BulkheadWattage:20-48WLumen Output: 3,100-6,700Lumens per Watt:Up to 149Input Voltage: 100-277VAC, 120-250 VDC, 230/240 VACMounting:Pole mountMounting Height:Up to 6mDISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.www.dialight.com7
Overview Industrial ApplicationsDuroSite LED Lighting Fixturesfor Industrial ApplicationsLED FloodlightWattage Range: 106-140WLumen Output Range:10,500-15,000Lumens per Watt:Up to 111Input Voltage: 100-277 VACMounting:Structure, PoleMounting Height:Up to 15mLED Stainless Steel Linear & Emergency Battery BackupWattage Range: 34W-67W (Standard), 35W-70W (Emergency)Lumen Output Range:2,600-5,100Lumens per Watt:Up to 76Input Voltage: 100-277 VAC (Standard), 230/240 VAC (Emergency)Mounting:Overhead, Wall, PoleMounting Height:Up to 6mDISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.8www.dialight.com
Overview Hazardous ApplicationsSafeSite LED Lighting Fixturesfor Hazardous Area ApplicationsLED High BayWattage:Lumen Output Range:Lumens per Watt:Input Voltage:Mounting:Mounting Height:Zone:88W-212W9,650-23,500110100-277 VACPole, Overhead, Ceiling, WallUp to 12mZone 1, 21 and Zone 2, 22LED GRP LinearWattage Range: 25-51WLumen Output Range:2,785-5,750Lumens per Watt: Up to 123Input Voltage: 100-277 VAC/120-250 VDC, 230/240 VAC (Emergency)Mounting:Ceiling, Wall, PoleZone:Zone 2, 21 & 22LED Linear & LED Emergency Linear - Stainless SteelWattage Range: 34W-67W (Standard), 35W-70W (Emergency)Lumen Output Range:2,600-5,100Lumens per Watt: Up to 76Input Voltage: 110-250 VAC (Standard), 230-240 VAC (Emergency)Mounting:Overhead, Ceiling, Wall, PoleMounting Height:Up to 6mZone:Zone 1, 21 and Zone 2, 22LED Area LightWattage Range:Lumen Output Range:Lumens per Watt:Input Voltage:Mounting:Mounting Height:Zone:58W5,600-6,000Up to 103100-277 VACOverhead, Ceiling, Wall, PoleUp to 10mZone 1, 21 and Zone 2, 22DISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.www.dialight.com9
Overview Industrial and Hazardous ApplicationsSafeSite LED Transportable Rangefor Hazardous Area ApplicationsSafeSite LED Transportable BulkheadWattage Range: 34WLumen Output Range:2,250Lumens per Watt:Up to 66Input Voltage: 100-277 VACZone:Zone 1, 21 and Zone 2, 22StreetSense LED Street Lightfor Industrial and Hazardous Area ApplicationsStreetSense LED Street Light - CE and ATEX Zone 2Wattage Range: 65-252WLumen Output Range:5,500-20,250Lumens per Watt:Up to 85Input Voltage:100-277 VACZone: Zone 2DISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.10www.dialight.com
Overview Industrial and Hazardous ApplicationsObstruction LED Lighting SolutionsICAOVigilant LED Based ICAO Type AHigh Intensity (White / Red) StrobeEffective Intensity: White Day – 200,000 cdWhite Twilight- 20,000 cdWhite or Red Night- 2,000 cdWattage: White day - 160WWhite twilight - 30WWhite Night - 23WRed Night - 30WInput Voltage: 208-277 VACVigilant LED Based ICAO Type A/Type BMedium Intensity (White/Red) Strobe - Infrared (IR) availableEffective Intensity: White Day- 20,000 cdWhite Night- 2,000 cdRed Night- 2,000 cdWattage: White Day- 36W (system 75W)White Night- 4W (system 10W)Red Night- 12W (system 25W)Input Voltage:120-240 VAC or /- 48 VDCVigilant LED Based ICAO Type B/Type CMedium Intensity (Red) Beacon - Infrared (IR) availableEffective Intensity:2,000 cdWattage: 3.3W (16.7% duty circle)- standard7.0W (16.7% duty circle)- IR model20 flashes per minute with 0.5 sec. on timeInput Voltage: 120-240 VAC or 24-48 VDCVigilant LED Based ICAO Type B/Type ELow Intensity (Red) RTO Side Light - Infrared (IR) availableEffective Intensity:32.5 cdWattage Range:1.5-9.0WInput Voltage:12-48 VDC, 120-240 VAC, 277 VACVigilant LED Based ICAO Type B/Type ELow Intensity (Red) Side LightEffective Intensity:32.5 cdWattage Range:13-24WInput Voltage:12-48 VDC, 120 VAC, 230 VACDISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.www.dialight.com11
Industrial Applications FloodlightProSite LED Floodlight - CEF1 ModelsMechanical Information:Fixture weight:10.9 - 13.6 kgShipping weight: 14.5 kgEPA (m ):0.186Mounting:(all with 7.5 tilting increments)316 stainless steel straight bracket316 stainless steel angled bracketSlipfitter bracketCable entry:2 x M252Electrical Specifications:Operating voltage:120-277 VAC / 120-250 VDC347-415 VACOperating temp:-40 C to 65 CEMC:CISPR 15FCC 47CFR 15IEC 61000-3-3IEC 61547IEC 61000-3-2 CETransient protection: ENEC - Pending*Optional:6KV/3KA combination wave, as per IEEEC62.41, line-line and line-ground.10kV/5kA for non-hazardous modelsTHD: 20%Power Factor: 0.9Dimming:Wireless dimming controlsvia Dialight IntelliLED,DALI 2.0 compatible/ 0-10 VDCPatent PendingCertifications & Ratings 10 year warranty IP66/67 IK10 (integrated PC optic/lens/lens cover), IK08 (glass lens cover) L70 150,000 hours @ 25 C ambient*Values based on preliminary data awaiting validation or certification.Angled BracketConstruction:Housing:A360 Die-cast aluminumHardware:316 stainless steelFinish:Superior epoxy and polyesterdual coat finishLens:Integrated PC Optic/Lens,Glass Lens Cover, PC Lens CoverPhotometric Information:Dimensions in mm [inches]CRI:70 (80 optional)CCT:5000K (cool white)4000K (neutral white)2700K (warm white) - 80 CRIAmberBeam pattern:Medium - 55 Wide - 125 Very Wide - 131 x 108 Asymmetric - Forward DistributionIES files:Available at www.dialight.comAll values typical unless otherwise stated (tolerance /- 10%)WARNING - INSTALLATION & SECONDARY RETENTION. Use of any Dialight products without proper installation (including secondary retention / netting) and periodic inspections could causesevere injury or death. Dialight recommends that all installations should use secondary retention / netting (appropriate to the installation environment) where applicable. It is the exclusive responsibilityof the contractor, installer and/or end-user to: (a) determine the suitability of the product for its intended application; and, (b) ensure that the product is safely installed (with secondary retention /netting where appropriate) and in compliance with all applicable laws and regulations. To the extent permissible under applicable laws, Dialight disclaims all liability for personal injury and/or otherdamage resulting from any dislodgment or other dislocation of its products.12www.dialight.com
Industrial Applications FloodlightOrdering InformationProSite LED Floodlight - CEIndustrial - CEPart NumberFixtureLumensWattagelm/WVoltageCCTLensBeam Distribution12,000lm - Angled BracketF1E-N7B2-BDEN-VGN13,20081163120-277VAC / 120-250VDC5000k (cool white)Integrated PCVery Wide (131 x 108 )F1E-N6B2-BDEN-VGN13,20081163120-277VAC / 120-250VDC5000k (cool white)Integrated PCWide (125 )F1E-N4B2-BDEN-VGN13,20081163120-277VAC / 120-250VDC5000k (cool white)Integrated PCMedium (56 )F1E-7FB2-BDEN-VGN12,20081151120-277VAC / 120-250VDC5000k (cool white)GlassAsymmetric18,000lm - Angled BracketF1E-N7B2-CDEN-VGN19,100124154120-277VAC / 120-250VDC5000k (cool white)Integrated PCVery Wide (131 x 108 )F1E-N6B2-CDEN-VGN19,100124154120-277VAC / 120-250VDC5000k (cool white)Integrated PCWide (125 )F1E-N4B2-CDEN-VGN19,100124154120-277VAC / 120-250VDC5000k (cool white)Integrated PCMedium (56 )F1E-7FB2-CDEN-VGN17,700124143120-277VAC / 120-250VDC5000k (cool white)GlassAsymmetric30,000lm - Angled BracketF1E-N7B2-FDEN-VGN31,600234135120-277VAC / 120-250VDC5000k (cool white)Integrated PCVery Wide (131 x 108 )F1E-N6B2-FDEN-VGN31,600234135120-277VAC / 120-250VDC5000k (cool white)Integrated PCWide (125 )F1E-N4B2-FDEN-VGN31,600234135120-277VAC / 120-250VDC5000k (cool white)Integrated PCMedium (56 )F1E-7FB2-FDEN-VGN29,200234125120-277VAC / 120-250VDC5000k (cool white)GlassAsymmetricAll values typical unless otherwise stated (tolerance /- 10%).Part numbers listed in bold are typically available in stock.Voltage - For 347-415 VAC change 7th character to ‘5’.CCT - For 4000k change 6th character to ‘L’. For 2700k change 6th character to ‘W’. Amber options available.Lens - For glass lens cover change 4th character to a ‘7’, For PC lens cover change 4th character to a ‘4’.Surge Protection - for 10kV surge protection 120-277VAC change 7th character to ‘8’. For 10kV surge protection 347-415 VAC change 7th character to ‘9’PE Cell - For NEMA PE Cell Receptacle with shorting cap change 9th character to ‘S’.Mounting Bracket - For straight bracket change 10th character to ‘F’, for slip fitter change 10th character to ‘S’.DISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.www.dialight.com13
Industrial Applications FloodlightProSite LED Floodlight - CEF2 ModelsMechanical Information:Fixture weight:19.5 - 24.5 kgShipping weight: 25.5 kgEPA (m ):0.310Mounting:(all with 7.5 tilting increments)316 stainless steel straight bracket316 stainless steel angled bracketCable entry:2 x M252Electrical Specifications:Operating voltage:120-277 VAC / 120-250 VDC347-415 VACOperating temp:-40 C to 65 C-40 C to 55 C - 60klmEMC:CISPR 15FCC 47CFR 15IEC 61000-3-3IEC 61547IEC 61000-3-2 ENEC - Pending*Transient protection:10kV/5kA IP66/67THD: 20% IK10 (integrated PC optic/lens/lens cover), IK08 (glass lens cover)Power Factor: 0.9Dimming:0-10VDCPatent PendingCertifications & Ratings 10 year warranty CE L70 150,000 hours @ 25 C ambient*Values based on preliminary data awaiting validation or certification.Construction:Angled BracketHousing:A360 Die-cast aluminumHardware:316 stainless steelFinish:Superior epoxy and polyesterdual coat finishLens:Integrated PC Optic/Lens,Glass Lens Cover, PC Lens CoverPhotometric Information:Dimensions in mm [inches]CRI:70 (80 optional)CCT:5000K (cool white)4000K (neutral white)2700K (warm white) - 80 CRIAmberBeam pattern:Medium - 55 Wide - 125 Very Wide - 131 x 108 Asymmetric - Forward DistributionIES files:Available at www.dialight.comAll values typical unless otherwise stated (tolerance /- 10%)WARNING - INSTALLATION & SECONDARY RETENTION. Use of any Dialight products without proper installation (including secondary retention / netting) and periodic inspections could causesevere injury or death. Dialight recommends that all installations should use secondary retention / netting (appropriate to the installation environment) where applicable. It is the exclusive responsibilityof the contractor, installer and/or end-user to: (a) determine the suitability of the product for its intended application; and, (b) ensure that the product is safely installed (with secondary retention /netting where appropriate) and in compliance with all applicable laws and regulations. To the extent permissible under applicable laws, Dialight disclaims all liability for personal injury and/or otherdamage resulting from any dislodgment or other dislocation of its products.14www.dialight.com
Industrial Applications FloodlightOrdering InformationProSite LED Floodlight - CEIndustrial - CE / RCMPart NumberFixtureLumensWattagelm/WVoltageCCTLensBeam Distribution60,000lm - 10kV Surge Protection - Angled BracketF2E-N7B8-NDEN-VGN65,000484134120-277VAC / 120-250VDC5000k (cool white)Integrated PCVery Wide (131 x 108 )F2E-N6B8-NDEN-VGN65,000484134120-277VAC / 120-250VDC5000k (cool white)Integrated PCWide (125 )F2E-N4B8-NDEN-VGN65,000484134120-277VAC / 120-250VDC5000k (cool white)Integrated PCMedium (56 )F2E-7FB8-NDEN-VGN60,100484124120-277VAC / 120-250VDC5000k (cool 120-277VAC / 120-250VDC4000k (neutral white)Integrated PCVery Wide (131 x 108 )F2E-N6L8-NDEN-VGN65,000484134120-277VAC / 120-250VDC4000k (neutral white)Integrated PCWide (125 )F2E-N4L8-NDEN-VGN65,000484134120-277VAC / 120-250VDC4000k (neutral white)Integrated PCMedium (56 )F2E-7FL8-NDEN-VGN60,100484124120-277VAC / 120-250VDC4000k (neutral white)GlassAsymmetric60,000lm - 10kV Surge Protection - Angled Bracket - 415 VACF2E-N7B9-NDEN-VGN65,000499130347-415VAC5000k (cool white)Integrated PCVery Wide (131 x 108 )F2E-N6B9-NDEN-VGN65,000499130347-415VAC5000k (cool white)Integrated PCWide (125 )F2E-N4B9-NDEN-VGN65,000499130347-415VAC5000k (cool white)Integrated PCMedium (56 )F2E-7FB9-NDEN-VGN60,100499120347-415VAC5000k (cool 347-415VAC4000k (neutral white)Integrated PCVery Wide (131 x 108 )F2E-N6L9-NDEN-VGN65,000499130347-415VAC4000k (neutral white)Integrated PCWide (125 )F2E-N4L9-NDEN-VGN65,000499130347-415VAC4000k (neutral white)Integrated PCMedium (56 )F2E-7FL9-NDEN-VGN60,100499120347-415VAC4000k (neutral white)GlassAsymmetricAll values typical unless otherwise stated (tolerance /- 10%).Part numbers listed in bold are typically available in stock.CCT - For 4000k change 6th character to ‘L’. For 2700k change 6th character to ‘W’.Lens - For glass lens cover change 4th character to a ‘7’, For PC lens cover change 4th character to a ‘4’.PE Cell - For NEMA PE Cell Receptacle with shorting cap change 9th character to ‘S’.Mounting Bracket - For straight bracket change 10th character to ‘F’DISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.www.dialight.com15
Industrial Applications High BayReliant LED High BayTechnical SpecificationMechanical Information:Fixture weight:9.3 kgShipping weight:12 kgBox dimensions:515 x 515 x 350mmMounting:Mounting:304 stainless steel mounting bracketElectrical Specifications:Certifications & Ratings 10 year warrantyCE / ENECIP66IK10 (polycarbonate) / IK07 (glass)L70 rated for 100,000 hours @ 55ºCL90 rated for 100,000 hours @ 25ºCOperating voltage:100-277 VAC 50/60HzOperating temperature:-40 C to 55 CTotal system powerconsumption:See ordering tableEMC:EN 55015IEC 61000-3-3IEC 61547IEC 61000-4-2IEC 61000-4-3IEC 61000-4-6IEC 61000-4-8IEC 61000-4-11Transient protection:6kV/3kA combination wave, as perIEEE C62.41, line-line and line-groundIEC 61000-4-5IEC 61000-4-4THD:IEC 55015 20% @ 100-277 VACHarmonics:IEC 61000-3-2, Class CPower factor: 0.9 @ 100-277 VACFlicker:IEC 61000-3-3Dimming:DALI 1.0 and 2.0 - 100-5%0-10 VDC continuous dimming - 100-5%Wireless dimming via optional DialightIntelliLED controls - 100-5%Cable entry:(3) M20Terminals:5 position, 0.5-4 mm2Materials:Housing:Polycarbonate (upper)Aluminium (lower)Lens:PolycarbonateGlass and acrylic options also availableHardware:304 stainless steelHook:304 stainless steelFixture finish:Superior dual coat finish- sealed polyester topcoat- epoxy primerGaskets:Light engine:SantopreneWiring box:EPDMPhotometric Information:Dimensions in mmCRI:80CCT:5000K (cool white)4000K (neutral white) options availableconsult factoryAll values typical unless otherwise stated (tolerance /- 10%)WARNING - INSTALLATION & SECONDARY RETENTION. Use of any Dialight products without proper installation (including secondary retention / netting) and periodic inspections could causesevere injury or death. Dialight recommends that all installations should use secondary retention / netting (appropriate to the installation environment) where applicable. It is the exclusive responsibilityof the contractor, installer and/or end-user to: (a) determine the suitability of the product for its intended application; and, (b) ensure that the product is safely installed (with secondary retention /netting where appropriate) and in compliance with all applicable laws and regulations. To the extent permissible under applicable laws, Dialight disclaims all liability for personal injury and/or otherdamage resulting from any dislodgment or other dislocation of its products.16www.dialight.com
Industrial Applications High BayReliant LED High BayOrdering InformationPart nControlsDALI Models5000K (cool white)Polycarbonate ClearAisleMediumDALIAll values typical unless otherwise stated (tolerance /- 10%).Models available up to 160 lm/W with acrylic or glass lens. Please contact a Dialight sales representative.Standard hardware options: bracket with hook.Standby power draw 1 wattFor additional controls options including occupancy sensor and IntelliLED wireless controls, contact a Dialight sales representative or see spec sheet.Accessory part numbers available on page 15DALI models are also compatible with 0-10V dimmingDISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.www.dialight.com17
Industrial Applications High BayReliant LED High BayBeam DistributionMediumAisleDISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporatedtherein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail.18www.dialight.com
Industrial Applications High BayReliant LED High BayTechnical InformationHBXCAB48RR-CP-OCC-DALI 1.2m long stainless steel safety rope(for use with included safety bracket) CPEBDHSMBDD (side mounted)DALI enabled occupancy sensorRR-WS-OCC-212RR-CP-OCC-REM Wattstopper FSP 212 (centre mounted)occupancy sensor Remote for CP occupancy sensorRR-WIRELESS-1 IntelliLED wireless controlPart NumberDescriptionHBXCAB481.2m long stainless steel safety rope (for use with safety bracket)RR-WIRELESS-1IntelliLED wireless controls - basicRR-WS-OCC-212Wattstopper FSP 212 (centre mounted) occupancy sensorRR-CP-OCC-DALICPEBDHSMBDD (side mounted) DALI enabled occupancy sensorRR-CP-OCC-REMRemote for CP occupancy sensorFor additional controls options including IntelliLED wireless controls, contact a Dialight sales representative for spec sheet.DISCLAIMER. All product information provided is, to the best of Dialight’s knowledge, accurate as of the date of publication. When ordering, refer to www.dialight.com for current versions of: (a)relevant product documentation (including the relevant product data sheets); (b) Dialight terms and conditions of sale; and, (c) the relevant product warranty. To the extent that any contract is deemedformed between Dialight and the purchaser of Dialight products and/o
formed between Dialight and the purchaser of Dialight products and/or an end-user, versions of documents available at www.dialight.com as at the date of sale shall be the versions incorporated therein. In the event of any discrepancy between this document or information provided at www.dialight.com, the latter shall prevail. LED GRP Linear
