WIXLIB

Technical Data- Descriptions - Patterns - Dimensions -

Table of ContentsACCESSORIESSTONE PATTERNSNameCodePage #NameCodePage #ASHLAR2303ADDRESS PLAQUEBILTMORE4004CANYON LEDGE2805CATHEDRAL1406CENTURION GNER SERIES29011DIMENSIONAL SLATE89312ELKMONT46013FIELDSTONE02014FLINT 18LEDGESTONE15019MESA42020MILANO48521MOUNTAIN LEDGE21022MULTI-LEDGE14623OMAHA47524PALOS VERDE04025PLANTATION29526RIVER ROCK08027RUBBLE25028RUSTIC90029SILHOUETTE 45454546464748484950515151515152535455Drawn by: Centurion StoneRevised: 03/2016Scale: NOT TO SCALEBEVELED COLUMN CAPBEVELED WALL CAPBRICK TRIM PIECECHISELED WATER EDGECOACH LIGHT TRIMDOOR BELL PLATEFLAT COLUMN CAPFLAT WALL CAPSTONEHEARTHSTONEKEYSTONEOUTLET BOX TRIMQUOIN CORNERSQUOIN FLATSRETRO SILLROCK FACE SILLRUBBLE WINDOW STONESHUTTER STRIPSPLIT FLAT COLUMN CAPTRIM STONEWATER BIB TRIM2

Ashlar#230Pattern Descriptions and ent of sizes and shapesin an organizedpattern. Face of pieces flat butwith texture.Installed with the longest sidedown and level. A joint isrequired with this pattern.1.5” to2”HW6” to 15” 6” to 15”Rec Joint3/4”Color NameProduct CodeBUCKS COUNTY230-701-25ODESSA htsSq.Ft.SkidBox12.5Skid100965Corners8011313

Biltmore #400Flat F-12x122G-12x211H-9x181Corner Pattern*SizePcs#1 6x6x121#2 3x9x121#3 3x9x92#4 3x6x91Pattern Descriptions and DimensionsPatternTextureCodeTHBILTMOREA weathered slateappearance withsawcut edges.4001.25” to1.5”WRec Joint6” to 12” 12” to 24”DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed 1281088Color NameProduct CodePENNSYLVANIA400-800-25TEXAS400-310-104

Canyon Ledge#280Pattern Descriptions and ell worn look of erodedtexture.Install in a horizontal patternwith mortar joint.1.5” to 3”W2” to 4” 4” to 18”Rec Joint3/4”Color NameProduct THERN Corners728985

Cathedral Stone #140Features: Can be installed in random or repeating pattern forquick installation with minimum cutting. 90 degree corners available. Pattern sized with half inch mortar joint. Convenient, easy handling packaging.Flats*PieceHeightWidthPcs Lin. Ft.Pcs#1#2#31226 x9 x 124x9x84 x 9 x 12Sq. Ft.C to 31.9APPROXIMATE COVERAGEX .44Pattern Descriptions and DimensionsPatternTextureCodeTHWRec JointCATHEDRALSTONEPitched faced stone, saw cutedges. Thickest of the pattern stones.1401 1/2” to 2 1/2”4” to 12”12” to 24”1/2”*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed 14Corners80792Color NameProduct CodePLAIN CATHEDRAL140-330-20SAGE VALLEY CATHEDRAL140-710-25Box117906

Centurion Castle Rock #070Features: Can be installed in random or repeating pattern for quick installation with minimum cutting.90 degree corners available.Average thickness of one and one fourth inches.Pattern sized with half inch mortar joint.Convenient, easy handling packaging.Flats*#12345Size6x66x99 x 1212 x 126 x 12Corner#Size*PcsPcs56423Lin. Ft.Sq. Ft.C to FPc.TotalTotalFactorA46 x 6 x 12 12”B4 3 x 12 x 12 12”C43x9x99”D43x9x66”APPROXIMATE COVERAGE4462163.23.24.751.5812.73X .80Pattern Descriptions and DimensionsPatternTextureCENTURIONFlat profile weathered faceCASTLE ROCK texture formal looking stone.CodeTHWRec Joint0701.25” to 1.5”6” to 12”6” to 12”3/4”*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternColor NameProduct 070-800-25BUCKS 0.5Skid126Corners128WeightsSkid93311387

Cherokee Blend #450Pattern Descriptions and Predominately square &rectangular design.Installed in a random patternwith long side down.HWRec Joint1.5” to 3” 1” to 12” 4” to 20” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed kid985973Color NameProduct CodeBUCKS COUNTY450-701-25KENTUCKY450-260-15ODESSA 658

Cheyenne #480Pattern Descriptions and minately square & rectangular design.Installed in a random patternwith long side down.HWRec Joint1.5” to 3” 2” to 12” 4” to 23” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed sColor NameProduct CodeSkidBROWNS VALLEY480-145-25PENNSYLVANIA480-800-259789739

Cutface#270Pattern Descriptions and otine cut with deepchiseled face.Installed in a horizontal pattern,sizes for easy installation.1.5” to 3”1” to 6”PackagingBoxSkidCornersSq.Ft.118880WRec Joint4” to 20” DRYSTACKWeightsColor NameProduct CodeSkidARIZONA270-724-25BROWN270-200-25BUCKS 185-65TEXAS270-310-101036101710

Designer Series #290Pattern Descriptions and DimensionsPatternFLATCORNERTextureCodeVersatile pattern withuniform height pieces.290Color NameProduct CodeAUSTIN290-547-10BUCKS -15PENNSYLVANIA290-800-25SUEDE290-185-65THW.5” to 1.5”1.75”4” to 16”1” to 1.5”1.75”5.5” x 9”Packaging/SkidRec JointDrystackWeightsSqFt/LnFtSkidFlat88 sf820Corner72 Lf56011

Dimensional Slate #893 & Satin "3/4"24"16"12"3/4"14.75"16"Pattern Descriptions and DimensionsPatternTextureFLATA weathered slateappearance withsawcut edgesCORNERCode893THWRec Joint1.25”12”24”3/4”1.25”12”4” x 16”3/4”*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternPackaging/SkidWeightsColor NameProduct cs.SqFt/LnFtSkidFlat51102 Sf1005Corner3232 Lf56212

Elkmont#460Pattern Descriptions and DimensionsPatternTextureInstallationTELKMONTSquare to rectangular stonewith weathered face and random spotter pieces.Installed level with spotterflat pieces.HWRec Joint1.5” to 3” 1” to 10” 6” to 18” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternColor NameProduct CodeBROWNS SkidCornersSq.Ft.10.258280WeightsSkid92572513

Fieldstone #020Pattern Descriptions and tinctively textured, smooth,rough faced flagstone look.Pieces are square, rectangularand angled.Installed with the longestside down and level. A jointis required with pattern.HWRec Joint1.5” to 3” 2” to 10” 4” to 10”3/4”*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternColor NameProduct eightsSkid81986614

Flint Ridge #430Pattern Descriptions and ged textured from angularfacets.Installed at random. Mix smalland large pieces for evenblend.HWRec Joint1.5” to 3” 2” to 10” 4” to 20” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternColor NameProduct q.Ft.118880WeightsSkid77792215

Foundation "* tern Descriptions and DimensionsPatternFlatCornerTextureCodeChiseled face530THWRec Joint1.5”7.25”22.5”1.5”7.25”4” to 15 5/8”3/4”*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternPackagingPcsSqFt/LnFtSkid80103.2 SfCorners6442.8 LfWeightsBoxSkid97987.5700Color NameProduct A530-800-2516

Georgetown#440Pattern Descriptions and uare and rectangulardesign.Installed in a random patternwith long side down.1.5” to 3”1” to 6”WRec Joint4” to 20” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternColor NameProduct ingSkidCornersSq.Ft.9680WeightsSkid90779217

Hackett#050Pattern Descriptions and DimensionsPatternHACKETTTextureInstallationUnique one of a kindInstalled horizontally and level.pattern. Old pieces from farmMay have a roll in plane tofences with years of weathering.resemble old farm fences.TH1.5” to2.5”2” to 4”WRec Joint4” to 14” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternColor NameProduct ornersSq.Ft.8872WeightsSkid89686918

Ledgestone #150Pattern Descriptions and DimensionsPatternTextureInstallationTHWRec JointLEDGELook of split layered stone.Long dimensional pieces.Narrow style gives edges apronounced look.Installed in a stacked designwith no joint. Stack as tight aspossible.1 1/8” to2 3/4”1” to2.5”6.5” to16.75”DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternPackagingBoxSkidCornersWeightsColor NameProduct UCKS COUNTYCALIFORNIACHARDONNAYENGLISHGRAYKENTUCKYMT. RUNDLEPENNSYLVANIASOUTHERN 10-1019

Mesa#420Pattern Descriptions and quare and rectangularpieces with flat spotter pieces.Installed at random with longsides down and level. Spot inflat pieces at random.HeightWidthRec Joint1.5” to 3” 2” to 12” 4” to 18” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternColor NameProduct kaging 20

Milano #485Pattern Descriptions and tMESAQuarried look, roughchiseled pieces.Lay at random design.1.5” to 2.5”2” to 6”WidthRec Joint4” to 18” DRYSTACK*thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openings as well as maintaining a level and coarsed patternPackaging SkidSkidCornersSq.Ft.92.880WeightsColor NameProduct CodeSkid847854BUCKS COUNTYPENNSYLVANIA485-701-25485-800-2521

Mountain Ledge #210Pattern Descriptions and DimensionsPatternTextureCodeFLATRugged distinct pieces ofmountain ledge. Panels aredesigned for easy installation.210CORNERThicknessHeightWidth.75” to 1.5”4”8” to 12”.75” to Rec JointDRYSTACKWeightsSkid840610*thickness, height and width dimensions may have /- tolerance due tohand casting of product*trimming and shaping of pieces may be required around openings as well asmaintaining a level and coarsed patternColor NameProduct CodeAUSTIN210-547-10BUCKS 22

Multi-Ledge #1464" to 8"1.5"10.5"4"*4"*2.5"1/2" to 3"12"*16"*8"8"4"4"12"*4"*Pattern Descriptions and DimensionsPatternTextureCodeTHWRec JointMULTI-LEDGEPre-fit pieces give the look ofhand laid dry IAMSPORT146-557-25Color NameProduct thickness, height and width dimensions may have /- tolerance due to hand casting of product*trimming and shaping of pieces may be required around openingsas well as maintaining a level and coarsed pattern23

Omaha #475Pattern Descriptions and d look, roughchiseled pieces.Lay at random design.1.5” to 2.5”2” to sSkid807680Box91WRec Joint4” to 18” DRYSTACKColor NameProduct CodePENNSYLVANIAPLAIN475-800-25475-330-207624

Palos Verde #040Pattern Descriptions and e stone pattern. Quarried look with split flagstonetexture.Randomly installed with evensized tsSkid9621048Box110THW1.5” to 2.5” 4” to 12” 4” to18”Rec Joint3/4”Color NameProduct 15040-800-2512125