Transcription
V200 Series PositionersIn a single compact and rugged housingThe V200 incorporates the flexibility of converting from a pneumatic unit to several versionsof an electropneumatic unit, and the ability to add position feedback, in a matter of minutes, all inone compact and rugged housing. Maximum flexibility and versatility!!With a rugged Nema 4X, IP 66 die cast aluminum housing, versatile polyester coating, optional Tufram orNickel coatings, low -58F or high 325F temp options, and standard features like external zero and spanadjustment, this unit expands the VAC offering to cover this “all in one” market for positioners. Add to thisthe excellent performance yet simple design, and the combination equals a real value.A product that offers it “all” and in one compact, simple, housing!!
The V200Dome Indicator Black/Yellow, Red/GreenInternal 4/20 mAFeedbackInternal switchesMechanical or Reed.
PositionerV200 E (electropneumatic) OptionsV200 Benefits Compact Design Quality components rugged and accurateperformance External zero and span (complete calibration)adjustment without removing cover Easily maintain all key components Clear, visible indicator with arrow indicatorstandard-beacon optional Field changeable to any I/p optionV200-EX ExplosionProof UnitV200E-StandardNema 4X Unit orIS UnitV200-FF FailFreeze UnitV200E-0/10 Volt UnitExtra High Temp(EHT) 325 FV200 Tufram CoatedV200-EX withThird PartyEX SwitchV200E-GA GasApproved Unit
Technical Specifications:Positioners:Input SignalSupply PressureLinearity errorHysteresisRepeatabilityWeightTemperature rangePneumaticV200P3-15 PSI20-145 PSI 0.7% f.s. 0.4% f.s. 0.3% f.s.3.2 lbsElectropneumaticV200E & -IS4-20mA20-145 PSI 1.0% f.s. 0.6% f.s. 0.5% f.s.3.8 lbs.-40 to 185 F-40 to 185 F-40 to 85 C-40 to 85 CLow Temp-58 to 185 F-50 to 85 CExtra High Temp (EHT) -40 to 325 F-40 to 162 CSpool/Pilot ValvesStandard /Low BleedHigh GainV200-EX4-20 mA20-145 PSI 0.8% f.s. 0.5% f.s. 0.4% f.s.5.3 lbs.V200-FF4-20 mA20-100 PSI 1.2% f.s. 0.9% f.s 0.8% f.s.5.4 lbs.-40 to 185 F-40 to 85 C-20 to 158 F-20 to 70 CSuper High Gain/High FlowAir Delivery@87 PSI (600 kPa)28.3 scfm31.5 scfm 50 scfmBleed Rate@87 PSI (600 kPa) .2 scfm.83 scfm 1.3 scfmPressure Gain240:11100:11100:1Air connections1/4” NPTApprovals—Positioners onlyGauges1/8” NPTCable Entry1/2” NPTIngress & corrosion protection—NEMA 4X and IP66Ratings for hazardous locations:Standard coatingPolyesterV200-EXFeedback (not rated for EX or IS) Enclosure Nema 4X/IP 66ATEX-explosion protectionGeneral Purpose:1487X, intrinsically safe EEx ia IIC T4/T5/T6Plug-in components directly into V200 series positioner housingCan combine switches and 4/20 feedback E121X, flameproof EEx d IIC T4/T5/T6Conduit connections 1/2” NPTOperating temp-40 to 185 F (-40 to 85 C) FM and CSACL I, II Div 1 Grp B-GMechanical Switches: Explosion Proof2-Type: SPDT, V3Intrinsically SafeMax Load:FMCL I-II-III Div 1 Grp A-GResistive(Inductive)VoltageCSACL II Div 1&2 Grp E-G15 A(3) A125/250 VACCL III0.25 A(0.1) A220 VDC0.5 A(0.2) A110 VDCNon Incendive8A(7) A24 VDCFMCL 1 Div2 Grp A-CReed Switches:2-Type: SPDT-CO,Form C Temperature ClassContact rating:max 3WShort circuitAmbient TempVoltage:Switchingmax 100 VDCCurrent-max maxBreakdownmin 200 VDCT650 mA140 F (60 C)Current:Switchingmax 0.20 AT560 mA158 F (70 C)Carrymax 1.3 AT460 mA185 F (85 C)Contact resistance:0.2 ohmsContact capacitance: 0.3 pFV200-IS (Intrinsically Safe)4/20 mA Position Feedback:ATEXVoltage supply:7-30 VDCEEX ia IIcT4/T6Output:4-20 mA , 2 wireLoop Impedance:max 850 ohms @ 24 VDC FMCL1 Div1 Grp A B C DLinearity error: 1.2%Hysteresis: 0.2%CSATemp. Sensitivity: 0.1%/10 F (5.5 C)EX ia CL1 Grp A B C DOther Options:Potentiometer-Namur Sensors - Third party stackable EX mounting kits EX ia CL 1 Div2 Grp A B C D
Ordering Codes:PneumaticV200 PElectropneumaticV200 EExplosion ProofV200 EXIntrinsically SafeV200 ISFail FreezeV200 FFSpindleD1 Namur (standard)For additional spindle options, please contact VAC or visit our website at www.vacaccessories.comFront Cover90 degree rotation9060 degree rotation6045 degree rotation4530 degree rotation30Blank scale00IndicatorArrowAStandard Beacon/Raised (Black/Yellow)BOptional Beacon/Raised (Red/Green)BRGCam(standard) 90 C1 (standard)For additional cam options, please contact VAC or visit our website at www.vacaccessories.comSpool Valve Options (shipped with standard spool)Standard (Low Bleed)SG/LB—Shipped as StandardHigh GainHGSuper High Gain/FlowSHGHFFeedback OptionsFB2 SPDT Mechanical SwitchesM2 SPDT Reed SwitchesR4-20 mA TransmittermAMech Switches w/transmitterMmAReed Switches w/transmitterRmA1 K potentiometer1K10 K potentiometer10KOptionsExtra High Temp (Pneumatic only) (-40 to 325 F)EHTLow Temp (Pneumatic only) (-58 to 185 F)LT0/10 Volt I/P (V200E only)0/10VGas ApprovedGAATEXATEXTufram Coating (V200 P and E)TUFNickel Coating (V200 P and ic with namur spindle, 90 degree cover, raised indicator, 90 degree cam,feedback with mechanical switches and 4/20 mA transmitter.V200 Options/Features:Flexible mountingfor rotary or linearapplicationsVarious SpoolValve OptionsInternal I/p with simpleloop test points.External zero and spanadjustment-withoutremoving the positionercover – 3-15 or 6-30 PSI
V200 Dimensional DrawingsV200P, E, -IS, TUF, NIC, EHT, LTGauges 1/8" NPT(4x)(optional)Dome Indicator(optional)V200-FF562 7/32"752 31/32"15,85/8"3,85/32"67,32 21/32"55,52 3/16"1335 1/4"2531/32"47,51 7/8"97,53 27/32"1275"126,64 31/32"62,52 15/32"572 1/4"15,55/8"612 13/32"27710 29/32"290,711 7/16"48,31 29/32"1214 3/4"53/16"451 25/32"Hexs1 iz13 0 e/32"Conduit Entry1/2" NPT (4x)451 25/32"173,46 13/16"411 5/8"682 11/16"
55,52 3/16"62,52 15/32"1335 1/4"612 13/32"270,710 21/32"2531/32"15,55/8"47,51 7/8"572 1/4"15,55/8"97,53 27/32"1275"Conduit Entry1/2" NPT (4x)1214 3/4"53/16"451 25/32"Dome Indicator(optional)451 25/32"173,46 13/16"411 5/8"682 11/16"Hexs1 iz13 0 e/32"126,64 31/32"Gauges 1/8" NPT(4x)(optional)562 7/32"752 31/32"291,111 15/32"V200E 0-10V,9 6"74 5/112Conduit Entry1/2" NPT1234 27/32"47,51 7/8"62,52 15/32"207,78 3/16"1335 1/4"2519 7/8"2531/32"562 7/32"752 31/32"29411 9/16"V200-EXV200E-GANOTE: mm appear in parentheses10,87/16"572 1/4"15,55/8"97,53 27/32"1275"Dome Indicator(optional)137,95 7/16"100,43 31/32"612 13/32"53/16"451 25/32"451 25/32"173,46 13/16"411 5/8"Ø682 11/16"Hexs1 iz13 0 e/32"1214 3/4"Gauges 1/8" NPT(4x)(optional)161,36 11/32"
Retrofit your valve with a VACPositioner—a “choice” of options!Most industrial control valves are equipped with the valvemanufacturer’s “standard” positioner when the valve is firstdelivered. As these companies move into new generationproducts, they often leave behind a whole marketplace ofproduct needs that don’t “fit” the application needs. Whenthese manufacturers’ standard positioners need replacing,what choices are you offered? High prices, poor delivery, ordiscontinued products leave users without many options.VAC wants to put “choice” back in the hands of these users.From a very basic and simple, pneumatic unit to standard orEX electropneumatic, to a complete line of digital positioners,the choice of replacing the manufacturer’s “standard” positioneris back in your hands. VAC products offer the control accuracyyou need, yet a simple rugged design (all metal housings) that isflexible and adaptable. The installed base of control valves is veryimportant to users and to VAC.We want to offer you either rotary or linear positioner productsthat “fit” the needs of the application and not limit your options.Retrofit with a VAC positioner, putting your positioner optionsback in your control.Our way of doing business isjust as simple as our products.A solid, simply designed positioner, with high qualityconstruction is just the start of the Valve Accessories andControls story. Because we are a privately held, customerdriven company, we can meet your needs much quicker,with a lot more flexibility.A quality company must be a lot more than a qualityproduct. Responding promptly and honestly, showinggenuine interest in what we do and what you do, stayingfocused on our strengths, and being different in a positiveway are important.Sounds simple-we plan to keep it that way!Valve Accessories & Controls200 Jade Park Chelsea, AL 35043TEL: 205-678-0507 FAX: 205-678-0510info@vacaccessories.comValve Accessories & Controls12942 Bedford Falls Drive Cypress, TX 77429TEL: 713-493-2624 Cell: 713-253-7781FAX: 281-256-9399randye@vacaccessories.comValve Accessories & ControlsSweden ABBox 580, Veddestavagen 13SE-175 62 Jarfalla, SWEDENTEL: 46 8 568 200 50 FAX: 46 8 580 361 35info@vac.seValve Accessories & Controls292 Hendricks RoadBolton Landing, NY 12814Phone 518-222-1170FAX: ies.com2M 8/12
V200E-Standard Nema 4X Unit or IS Unit V200-EX Explosion Proof Unit V200-FF Fail Freeze Unit V200E-0/10 Volt Unit V200E-GA Gas Approved Unit V200 Benefits Compact Design . Retrofit with a VAC positioner, putting your positioner options back in your control. Our way of doing business is
