WIXLIB

Explosion Proof MagnetostrictiveLevel SensorsSeries: MPXMPX-ECMPX-E ChemMPX-RAPG MPX-TUSThe MPX Series Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquidlevel measurement applications. The MPX-R’s large, buoyant, and robust float allows it to be used in harsh applications wherefouling or buildup might otherwise be of concern. The MPX-E’s light-weight design allows it to be used in applications wherespace is limited. The MPX-E Chemical has a chemical resistant coating, allowing for use in corrosive, acidic, and marine environments, while the MPX-T’s 1”Ø titanium stem extends its chemical capabilities for use in rougher, tougher environments, includingH2S. All four stems carry Class I, Division 1 &2 and Class I, Zone 1 & 2 approvals for use throughout North America.Features Class I Division 1 Groups C & D, Class I Zone 1, Class I Zone 2Highly accurate and repeatable readings4-20 mA (single or dual float), RS-485 (Modbus RTU) outputRugged and reliable, lengths up to 31.5 feet (9.60 m)Dual level (interface) measurementTank volume/level, strapping tableAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.comRev. E, 06/21/2021

MPX-E SpecificationsMPX-E FloatsSmall HousingFloats A, BLarge Housing4.92”125 mm4.25”108 mm5.71”145 mm5.00”127 mm2.0”51 mmFloat F2.06”52 mm2.20”56 mm0.27” (x2)7 mm0.27” (x2)7 mmFloats C, D1.47”37 mm1.38”35 mm3.74”95 mmFloat G1/2” NPTHousingConnectionLocation1.63”41 mmFloat E4.21”107 mm1.91”49 mm1.88”48 mm1.87”48 mm7.32 - 7.44”186 - 189 mm6.53 - 6.65”166 - 169 mm3/4” NPTHousingConnectionLocation1.78”45 mmPerformanceElectrical Resolution:4-20 mA: 14 bit DAC (1 mm)Modbus: 0.04 in. (1 mm) Distance Accuracy4-20 mA, Modbus: Greater of 0.05% of FS or 1 mm Temperature AccuracyRTD - 1k Ohm: 1 C Electrical Connection: Terminal Block, 12-24 VDC Typical current draw:4-20 mA: (single) 4-22 mA, (dual) 8-44 mAModbus (RS-485): 25 mA Reverse polarity protection Surge protection (Output 4 only)ConnectivityProgramming Output:Single or dual loop-powered 4-20 mA- Set points: 4 mA, probe bottom; 20mA, 6 in. belowprobe zero point or at customer specified pointModbus RTU (RS-485), optional temperature output RS-485: optional RST-6001 USB to RS-485 converter 4-20 mA: factory set oroptional RST-4100 programming moduleEnvironmentalCertification Probe Operating Temperature: -40º - 85ºC (-40º - 185ºF) IP65 CSA:Rated 12-24 VDC; 4-20 mA or 80 mA; Ta 85 CClass I, Division 1 & 2, Groups C & D T4Ex d IIB T4Ex nA IIB T4Class I, Zone 1; AEx d IIB T4Class I, Zone 2; AEx nA IIB T4Physical Housing: Cast aluminum, epoxy coated Stem: 0.5” ø 316L SS Stem Length: 1 - 12.75 ft. (0.3 - 3.9 m)APGAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.com 2Rev. E, 06/21/2021

Model Configuration OptionsModel Number: MPX - E - - B - -ABCDEFGHIJKA. Stem Type EI. Stem/Finish Material0.5 in. diameter 316L SSB. Output 2Single float, 4-20 mA (loop powered, 2 wire)3Dual float, 4-20 mA (loop powered, 3 wire)4Modbus RTU, surge protectionAll Housing Die-cast Aluminum, IP65, Blue Large HousingA316L SS Min. 12 in. - Max. 153 in.K. Optional Temperature SensorMPX-E4 N None TStem RTD, 1 kΩ, 6 in. from bottom of probeSmall Housing† Note: This option is standardD. Float 1 (Top Float) BJ. Total Stem Length in InchesC. Housing Type A316L SS Round (0.65 SG)B316L SS Round (0.92 SG)C316L SS Cylindrical (0.65 SG)D316L SS Cylindrical (0.92 SG)EBuna-N (0.5 SG)F316 SS 3A Cylindrical (0.5 SG)GKynar Cylindrical (0.66 SG)†Note: Small housing only available with Modbus RTU (Output 4)††Note: Float 2 option B requires Float 1 option AE. Float 2 (optional) NNoneB316L SS Round (0.92 SG)††F. Mounting Type P NPT Plug 150#NNoneG. Mounting Size 1.52 1.5 in. (welded or slide connection)33 in. (slide connection only)NNone2 in. (welded or slide connection)H. Mounting Connection WWelded (fixed)SSlide with Compression Fitting (adjustable)MPX AccessoriesPlease order separately, by part number.DescriptionPart NumberProgramming ModuleRST-6001 (Modbus: MPX-x4)125734RST-4100 (4-20mA: MPX-x2, MPX-x3)125759Sold with 6 ft USB cableAPGAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.com 3Rev. E, 06/21/2021

MPX-E Chemical SpecificationsSmall HousingLarge Housing5.71”145 mm5.00”127 mm4.92”125 mm4.25”108 mmMPI-E Chemical FloatFloat G1/2” NPTHousingConnectionLocation1.91”49 mm0.27” (x2)7 mm1.88”48 mm1/2” NPT3.74”95 mm0.27” (x2)7 mm3/4” NPT HousingConnection Location7.13”181 mm6.34”161 mmPerformanceElectrical Resolution:4-20 mA: 14 bit DAC (1 mm)Modbus: 0.04 in. (1 mm) Distance Accuracy4-20 mA, Modbus: Greater of 0.05% of FS or 1 mm Temperature AccuracyRTD - 1k Ohm: 1 C Electrical Connection: Terminal Block, 12-24 VDC Typical current draw:4-20 mA: 4-22 mAModbus (RS-485): 25 mA Reverse polarity protection Surge protection (Output 4 only)ConnectivityProgramming Output:Loop-powered 4-20 mA- Set points: 4 mA, probe bottom; 20mA, 6 in. belowprobe zero point or at customer specified pointModbus RTU (RS-485), optional temperature output RS-485: optional RST-6001 USB to RS-485 converter 4-20 mA: factory set oroptional RST-4100 programming moduleEnvironmentalCertification Probe Operating Temperature: -40º - 85ºC (-40º - 185ºF) Float Maximum Operating Pressure: 30 PSIA @ 70ºF / 21ºC IP65 CSA:Rated 12-24 VDC; 4-20 mA or 80 mA; Ta 85 CClass I, Division 1 & 2, Groups C & D T4Ex d IIB T4Ex nA IIB T4Class I, Zone 1; AEx d IIB T4Class I, Zone 2; AEx nA IIB T4Physical Housing: Cast aluminum, epoxy coatedStem: 0.5” ø 316L SS with chemical resistant coatingStem Length: 1 - 12.75 ft. (0.3 - 3.9 m)Float: 1-7/8” Ø Kynar, 0.66 SGAPG4.21”107 mmAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.com 4Rev. E, 06/21/2021

Model Configuration OptionsModel Number: MPX - E - G N - P 2 W E - -ABCDEFGHIJKA. Stem Type EH. Mounting Connection0.5 in. diameter 316L SSB. Output 2Single float, 4-20 mA (loop powered, 2 wire)4Modbus RTU, surge protectionC. Housing TypeAll Housing Die-cast Aluminum, IP65, Blue Large Housing ASmall Housing†D. Float 1 GKynar Cylindrical (0.66 SG)E. Float 2 NPWWelded (fixed)I. Stem/Finish Material EChemical resistant ETFE (Fluon ) coatingJ. Total Stem Length in Inches Min. 12 in. - Max. 153 in.K. Optional Temperature SensorMPX-E4 N None TStem RTD, 1kΩ, 6 in. from bottom of probe Note: This option is standardNoneF. Mounting Type †Note: Small housing only available with Modbus RTU (Output 4)NPT Plug 150#G. Mounting Size 2Size 2APGAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.com 5Rev. E, 06/21/2021

MPX-R Specifications5.71”145 mm5.00”127 mmMPX-R FloatsFloats Y, Z3.07”78 mmFloats U, V3.03”77 mm5.88”150 mm5.50”140 mm0.27” (x2)7 mmFloats W, X5.00”127 mm3.08”78 mm2.80”71 mm4.76”121 mmFloats L, MFloats S, T3/4” NPTHousingConnectionLocationFloats I, J2.00”51 mm5.50”140 mm4.21”107 mm3.00”76 mm7.39”188 mm4.98”127 mmPerformanceElectrical Resolution:4-20 mA: 14 bit DAC (1 mm)Modbus: 0.04 in. (1 mm) Distance Accuracy4-20 mA, Modbus: Greater of 0.05% of FS or 1 mm Temperature AccuracyRTD - 1k Ohm: 1 C Electrical Connection: Terminal Block, 12-24 VDC Typical current draw:4-20 mA: (single) 4-22 mA, (dual) 8-44 mAModbus (RS-485): 28 mA Reverse polarity protection Surge protection (Output 4 only)ConnectivityProgramming Output:Single or dual loop-powered 4-20 mA- Set points: 4 mA, probe bottom; 20mA, 10 in. belowprobe zero point or at customer specified pointModbus RTU (RS-485), optional temperature output RS-485: optional RST-6001 USB to RS-485 converter 4-20 mA: factory set oroptional RST-4100 programming moduleEnvironmentalCertification Probe Operating Temperature: -40º - 85ºC (-40º - 185ºF) IP65 CSA:Rated 12-24 VDC; 4-20 mA or 80 mA; Ta 85 CClass I, Division 1 & 2, Groups C & D T4Ex d IIB T4Ex nA IIB T4Class I, Zone 1; AEx d IIB T4Class I, Zone 2; AEx nA IIB T4Physical Housing: Cast aluminum, epoxy coated Stem: 1.0” ø 316L SS Stem Length: 4 - 31.5 ft. (1.22 - 9.60 m)APGAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.com 6Rev. E, 06/21/2021

Model Configuration OptionsModel Number: MPX - R - - B - -ABCDEFGHIJKA. Stem Type RI. Stem/Finish Material1 in. diameter 316L SS2Single float, 4-20 mA (loop powered, 2 wire)3Dual float, 4-20 mA (loop powered, 3 wire)4Modbus RTU, surge protectionC. Housing TypeAll Housing Die-cast Aluminum, IP65, Blue 316L SS Min. 48 in. - Max. 378 in.K. Optional Temperature SensorMPX-R4 NT NoneStem RTD, 1kΩ, 6 in. from bottom of probeLarge Housing Note: This option is standardD. Float 1 (Top Float) BJ. Total Stem Length in InchesB. Output Z/Y 5.5h x 3d in. Red Polyurethane (0.65/0.94 SG)X/W 5 in. Round 316L SS (0.52/0.92 SG)V/U 6h x 3d in. Oval 316L SS (0.58/0.94 SG)T/S3 in. Round 316L SS (0.60/0.94 SG)M/L 5.5h x 2d in. Red Polyurethane (0.57/0.94 SG)J/I5h x 3d in. Oval Titanium (0.60/0.94 SG)NNoneE. Float 2 (optional) NNoneY5.5h x 3d in. Blue Polyurethane (0.94 SG)W5 in. Round 316L SS (0.92 SG)U6h x 3d in. Oval 316L SS (0.94 SG)S3 in. Round 316L SS (0.94 SG)L5.5h x 2d in. Blue Polyurethane (0.94 SG)I5h x 3d in. Oval Titanium (0.94 SG)F. Mounting Type P NPT Plug 150#NNoneG. Mounting Size 2 2 in. (welded or slide connection)33 in. (slide connection only)NNoneH. Mounting Connection WWelded (fixed)SSlide with Compression Fitting (adjustable)APGAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.com 7Rev. E, 06/21/2021

MPX-T Specifications5.71”145 mm5.00”127 mmMPX-T FloatsFloats I, J3.00”76 mm0.27” (x2)7 mm4.98”127 mm4.21”107 mm3/4” NPTHousingConnectionLocation7.39”188 mmElectricalPerformance Resolution:4-20 mA: 14 bit DAC (1 mm)Modbus: 0.04 in. (1 mm) Distance Accuracy4-20 mA, Modbus: Greater of 0.05% of FS or 1 mm Temperature AccuracyRTD - 1k Ohm: 1 C Electrical Connection: Terminal Block, 12-24 VDC Typical current draw:4-20 mA: (single) 4-22 mA, (dual) 8-44 mAModbus (RS-485): 28 mA Reverse polarity protection Surge protection (Output 4 only)ConnectivityProgramming Output:Single or dual loop-powered 4-20 mA- Set points: 4 mA, probe bottom; 20mA, 10 in. belowprobe zero point or at customer specified pointModbus RTU (RS-485), optional temperature output RS-485: optional RST-6001 USB to RS-485 converter 4-20 mA: factory set oroptional RST-4100 programming moduleEnvironmentalCertification Probe Operating Temperature: -40º - 85ºC (-40º - 185ºF) IP65 CSA:Rated 12-24 VDC; 4-20 mA or 80 mA; Ta 85 CClass I, Division 1 & 2, Groups C & D T4Ex d IIB T4Ex nA IIB T4Class I, Zone 1; AEx d IIB T4Class I, Zone 2; AEx nA IIB T4Physical Housing: Cast aluminum, epoxy coated Stem: 1.0” ø Titanium 2 Stem Length: 4 - 25 ft. (1.22 - 7.62 m)APGAutomation Products Group, Inc. 888.525.7300 sales@apgsensors.com www.apgsensors.com 8Rev. E, 06/21/2021