Transcription
Annex I - List of Designated Trade DivisionsTrade Division CodeTradeTrade Division(1 I Carpenter [Fender)1. WoodworkerWorking Across DesignatedDescription of SkillsRemoving, cutting and erecting timber fenders forprotection of piers, seawalls, dolphins and landingstepsTrade Division(s)C306(7) Joiner (C322)(68) Floor Layer [Master) (C316)(2) Carpenter [Formwork)[Master) [al Erecting and striking timber formwork forcivil construction[b) Erecting and striking timber formwork forbuilding worksC307C407 (3) Carpenter [Formwork Civil Construction)Erecting and striking timber formwork for civilconstructionC307bC407b (4) Carpenter [Formwork Civil Construction)[Striking)Striking timber formwork for civil constructionC307d (5) Carpenter [Formwork Building Construction)Erecting and striking timber formwork for buildingconstructionC307a (6) Carpenter [Formwork Building Construction)[Striking)Striking timber formwork for building construction(5)Carpenter (Formwork Building Construction) [C307a)(6)Carpenter (Formwork Building Construction)[Striking) [C307c)(3)Carpenter (Formwork Civil Construction) [C307b)(4)C307cCarpenter (Formwork Civil Construction) (Striking)(C307d)(7) JoinerInternal and external woodwork [except formworkand fender) using both hand tools and woodwork ing machineryC322(46A) False Ceiling Installer [C358)(62A) Partition (Metal Frame)Installer [C359)(70) Floor Layer [PVC Flooring)(C316a)(8) Joiner [Assembling)Assembling prefabricated woodwork andassociated small metal partsC322aC407aC422 Note: Under the same trade, the ··master trade division·· possesses a group of skills of trade divisions marked with dot.A registered worker of the ""master trade division" is allowed to carry out works independently, as well as to instruct and supervise other registered workers to carry outworks of all trade divisions of that particular group.
Annex I - List of Designated Trade DivisionsTrade Division CodeDescription of SkillsTradeTrade Division2. Hand-dugCaisson Worker(9) Hand-dug Caisson WorkerConstructing underground caissons by hand-dugcaisson method3. LevellerI 10) LevellerC353C453[a) Reading and interpreting drawings[bl Setting up job lines and levels and preparingtemplatesC323C423Setting up piling rigs for driven or bored piles worksC330C430 (12) Piling Operative[Percussive Pile)Setting up piling rigs for driven piles worksC330bC430b (13) Piling Operative[Bored Pile)Setting up piling rigs for bored piles worksC330aC430a[al [ii Blending liquid membrane materialsusing a hand blender[ii) Painting with primer and pouring liquidmembrane materials on prepared surfaces[iii) Platform waterproofing work[b) [ii Pouring hot asphalt primer on preparedsurfaces[ii) Cutting out adhesive-type felt to fitoverlapped position and affixing it to theplatform by using an electric blower[cl [ii Pouring hot asphalt primer on preparedsurfaces[ii) Cutting out burn-type and grainy colour feltto fit overlapped position and affixing it to theplatform by using a liquefied petroleum gasapplianceC301(11) Piling Operative([Master) 4. Piling Operative5. WaterproofingWorker1111 111(14) Waterproofing Worker[Master)*Working Across DesignatedTrade Division(s) Note: Under the same trade, the ··master trade division·· possesses a group of skills of trade divisions marked with dot.A registered worker of the ""master trade division" is allowed to carry out works independently, as well as to instruct and supervise other registered workers to carry outworks of all trade divisions of that particular group.
TradeTrade DivisionDescription of Skills I 15) Waterproofing Worker(Liquid Membrane)5. WaterproofingWorker (16) Waterproofing Worker(Burn-type Felt) I 17) Waterproofing Worker(Adhesive-type Felt)6. Drain and PipeLayer(18) Drain and Pipe Layer(Master) (a) Blending liquid membrane materials using ahand blender(bl Painting with primer and pouring liquidmembrane materials on prepared surfaces(cl Platform waterproofing workdl BillTrade Division CodeC301c-C401b-IC301boverlapped position and affixing it to the platformby using a liquefied petroleum gas applianceIIIIII(a) Pouring hot asphalt primer on prepared surfaces(b) Cutting out adhesive-type felt to fit overlapped(a) Assembling, installing and repairing (i) pipes, pipe-fittings, sanitary fixtures, cold,hot and flush water systems, and soil, wasteand rain water drainage systems in buildings;(ii) pipes and fittings in premises, and any pipesand fittings between premises and aconnection to the mains (including the pipesand pipe-fittings forming part of a fireservice) which are used for the purposes of asupply within the meaning of the WaterworksOrdinance (Cap 102)(bl Laying and joining underground drains,constructing manholes, installing pipes andfittings, constructing beds and haunches, andsurrounding pipes with concrete-III(al Pouring hot asphalt primer on prepared surfaces(b) Cutting out burn-type and grainy colour felt to fitposition and affixing it to the platform by usingan electric blowerWorking Across DesignatedTrade Division(s)-C301a-IIIC3006 Note: Under the same trade, the "master trade division·· possesses a group of skills of trade divisions marked with dot.A registered worker of the "master trade division" is allowed to carry out works independently, as well as to instruct and supervise other registered workers to carry outworks of all trade divisions of that particular group.
Annex I - List of Designated Trade Divisions111 111Trade Division CodeTradeTrade Division(18) Drain and Pipe Layer[Master) 6. Drain and PipeLayera (19) PlumberDescription of Skills[cl Laying water mains, making pressurized jointsby mechanical means, installing pipes andfittings, constructing beds and haunches, andsurrounding pipes with concreteAssembling, installing and repairing [al pipes, pipe-fittings, sanitary fixtures, cold, hotand flush water systems, and soil, waste andrain water drainage systems in buildings;[bl pipes and fittings in premises, and any pipesand fittings between premises and a connectionto the mains [including the pipes andpipe-fittings forming part of a fire service)which are used for the purposes of a supplywithin the meaning of the WaterworksOrdinance [Cap 102)Working Across DesignatedTrade Division(s)C3006C338C438C414 (20) DrainlayerLaying and joining underground drains, construct ing manholes, installing pipes and fittings,constructing beds and haunches, and surroundingpipes with concreteC314 (21 I PipelayerLaying water mains, making pressurized joints bymechanical means, installing pipes and fittings,constructing beds and haunches, and surroundingpipes with concreteC331 Note: Under the same trade, the ··master trade division·· possesses a group of skills of trade divisions marked with dot.A registered worker of the ""master trade division" is allowed to carry out works independently, as well as to instruct and supervise other registered workers to carry outworks of all trade divisions of that particular group.
Annex I -List of Designated Trade Divisions Trade 1. Woodworker Trade Division (1 I Carpenter [Fender) (2) Carpenter [Formwork) [Master) (3) Carpenter [Formwork - Civil Construction) (4) Carpenter [Formwork - Civil Construction) [Striking) (5) Carpenter [Formwork - Building Construction) (6) Carpenter [Formwork - Building Construction) [Striking) (7) Joiner (8) Joiner .
