Transcription
User Manual
Content:1. how does the collar work.32. how to charge the battery.43. how to turn on the collar.54. operating instructions.65. how to put the collar on the dog.76. questions and answers.7
How does the DogRook Bark Collar work?The vibration bark collar prevents the dog's barking through thehumane application of the behavior-modifying tones andvibration stimulation.The collar is easy to use and to test. It activates by the throatvibrations caused by your dog's barking. A microprocessor insidethe collar distinguishes your dog's bark from other environmentalnoises and automatically delivers a behavior-modifying tone andvibration after each bark.important note:Please ensure that the collar is fitted correctly. If the collar is notfitted correctly it may activate randomly.correct position:1. It's not moving on your dog's neck;2. You are able to put only 1 finger between the strapand the dog's neck.2
1st bark:Beep for 1.5 s2nd bark:Beep for 2.5 s3rd bark:Sound for 4 s Vibration for 0.5 s4th bark:Sound for 4 s Vibration for 1 s5th bark:Sound for 4 s Vibration for 1.5 s6th bark:Sound for 4 s Vibration for 2 s7th bark:Sound for 4 s Vibration for 2.5 s8th bark:!Sleep mode for Safety (1 minute)To get the best efficiency in preventing barking support the work of the collar with your voicecommands.Say "NO!" loud and clear every time the dog barks.This will help the dog to make the connectionbetween the impulse and the word "NO".3
How to charge the battery?21Chargіng Socket3Power/Minus ButtonLED Indicator4Plus ButtonTo charge the collar – pull away the rubber cap covering the charging socketand insert the cable. When the light is red it means that the collar needs to becharged. The charging process usually takes 2-4 hours. When the indicator hasgreen light it means that the battery is fully charged and ready to work.The /- buttons are for adjusting the sensitivity level. The collar has 7 levels ofsensitivity. Reduce the sensitivity of the collar if it responds to third-party noise orincrease it if it does not detect your dog’s barking. The default level of sensitivityis 4.How to turn on the collar?Press the «-» (Minus) button for 2 seconds to Turn ON the collar. The LEDIndicator will light, indicating that the Sound and Vibrating functions areactive.Hold the «-» (Minus) button for 2 seconds to Turn OFF the collar. The LEDIndicator will turn off, indicating that the collar has been deactivated.Adjust the DogRook bark collar’s sensitivity by using the « » (Plus) and «-»(Minus) buttons.Blow in the hole on the collar to test if it works. If it reacts – collar works.4
Operating instructionsI DONT NOTICETHE COLLAR1.Put the collar on the dog so that theycan get used to it. Do not turn it onuntil the dog stops noticing it.2.Turn the system on to begin trainingyour dog.SWITCH ITON3.You must say NO loud and clearevery time the dog barks. This willhelp the dog to make the connection between the impulse and theword NO.NO!WOOF!4.Your dog will soon learn the connection between the impulse andNO. And soon even when you arenot around, he will understand theimpuls as NO.NO!5
How to put the collaron the dog?1.Make sure that the collar is charged.Green light indicates that thebattery is full.LED indicator2.If you have a small dog, therewill be excess strap.cut off the extrastrap3.heat the end withthe lighterplus buttonAdjust the sensor sensitivy.Use /- buttons to adjustsensors 8 levels of sensitivitypower/minus button4.Right way to put the collar on.tired too loose on the neckplaced away from the vocal cordEnsure that no more thanone finger can pass through6
Questions and answerswhen and how often do i need to chargethe collar?We recommended that you charge the collar once a 1-2 week depending onthe frequency of use.why collar does not activate?It is maybe 3 possible reason:When the indicator has Red light – You need charge the battery.The sensitivity level is set up too low – We recommended to increase thesensitivity level.The collar too loose - We recommended adjusted the strap so that onefinger can fit comfortably between it and your dog’s neck.why collar beep but not vibrate?The charge is not enough and the collar does not sound properly or makeconstant noise instead of corrective sounds and vibration - Please charge thebattery.collar goes when my dog will not bark. why?The sensitivity level is set up too high – Please reduce the sensitivity level.why in the box we have 2 sets of prongs?Collar has prongs of different lengths are needed to accommodate bothlong- and short-haired dogs to detecting the vibration from your dog’s throatwhen he barks.7
Contact Us:m.me/dogrooksupport@dogrook.comJoin to ourcommunity:Dogrook.carehttp://bit.ly/Dogrook
until the dog stops noticing it. 5 I DONT NOTICE THE COLLAR NO! SWITCH IT ON WOOF! NO! 2. Turn the system on to begin training your dog. 3. You must say NO loud and clear every time the dog barks. This will help the dog to make the connec - tion between the impulse and the word NO. 4. Your dog
